intel: Move the Intel wired LAN drivers

Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and
the necessary Kconfig and Makefile changes.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 834 deletions

diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
deleted file mode 100644
index 7b8ddd830f1..00000000000
--- a/drivers/net/igb/e1000_defines.h
+++ /dev/null
@@ -1,834 +0,0 @@
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2011 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_DEFINES_H_
-#define _E1000_DEFINES_H_
-
-/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
-#define REQ_TX_DESCRIPTOR_MULTIPLE  8
-#define REQ_RX_DESCRIPTOR_MULTIPLE  8
-
-/* Definitions for power management and wakeup registers */
-/* Wake Up Control */
-#define E1000_WUC_PME_EN     0x00000002 /* PME Enable */
-
-/* Wake Up Filter Control */
-#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
-#define E1000_WUFC_MAG  0x00000002 /* Magic Packet Wakeup Enable */
-#define E1000_WUFC_EX   0x00000004 /* Directed Exact Wakeup Enable */
-#define E1000_WUFC_MC   0x00000008 /* Directed Multicast Wakeup Enable */
-#define E1000_WUFC_BC   0x00000010 /* Broadcast Wakeup Enable */
-
-/* Extended Device Control */
-#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
-/* Physical Func Reset Done Indication */
-#define E1000_CTRL_EXT_PFRSTD    0x00004000
-#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES  0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX  0x00400000
-#define E1000_CTRL_EXT_LINK_MODE_SGMII   0x00800000
-#define E1000_CTRL_EXT_LINK_MODE_GMII   0x00000000
-#define E1000_CTRL_EXT_EIAME          0x01000000
-#define E1000_CTRL_EXT_IRCA           0x00000001
-/* Interrupt delay cancellation */
-/* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_DRV_LOAD       0x10000000
-/* Interrupt acknowledge Auto-mask */
-/* Clear Interrupt timers after IMS clear */
-/* packet buffer parity error detection enabled */
-/* descriptor FIFO parity error detection enable */
-#define E1000_CTRL_EXT_PBA_CLR        0x80000000 /* PBA Clear */
-#define E1000_I2CCMD_REG_ADDR_SHIFT   16
-#define E1000_I2CCMD_PHY_ADDR_SHIFT   24
-#define E1000_I2CCMD_OPCODE_READ      0x08000000
-#define E1000_I2CCMD_OPCODE_WRITE     0x00000000
-#define E1000_I2CCMD_READY            0x20000000
-#define E1000_I2CCMD_ERROR            0x80000000
-#define E1000_MAX_SGMII_PHY_REG_ADDR  255
-#define E1000_I2CCMD_PHY_TIMEOUT      200
-#define E1000_IVAR_VALID              0x80
-#define E1000_GPIE_NSICR              0x00000001
-#define E1000_GPIE_MSIX_MODE          0x00000010
-#define E1000_GPIE_EIAME              0x40000000
-#define E1000_GPIE_PBA                0x80000000
-
-/* Receive Descriptor bit definitions */
-#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
-#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
-#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
-#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
-#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
-#define E1000_RXD_STAT_TS       0x10000 /* Pkt was time stamped */
-
-#define E1000_RXDEXT_STATERR_CE    0x01000000
-#define E1000_RXDEXT_STATERR_SE    0x02000000
-#define E1000_RXDEXT_STATERR_SEQ   0x04000000
-#define E1000_RXDEXT_STATERR_CXE   0x10000000
-#define E1000_RXDEXT_STATERR_TCPE  0x20000000
-#define E1000_RXDEXT_STATERR_IPE   0x40000000
-#define E1000_RXDEXT_STATERR_RXE   0x80000000
-
-/* Same mask, but for extended and packet split descriptors */
-#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
-    E1000_RXDEXT_STATERR_CE  |            \
-    E1000_RXDEXT_STATERR_SE  |            \
-    E1000_RXDEXT_STATERR_SEQ |            \
-    E1000_RXDEXT_STATERR_CXE |            \
-    E1000_RXDEXT_STATERR_RXE)
-
-#define E1000_MRQC_RSS_FIELD_IPV4_TCP          0x00010000
-#define E1000_MRQC_RSS_FIELD_IPV4              0x00020000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX       0x00040000
-#define E1000_MRQC_RSS_FIELD_IPV6              0x00100000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP          0x00200000
-
-
-/* Management Control */
-#define E1000_MANC_SMBUS_EN      0x00000001 /* SMBus Enabled - RO */
-#define E1000_MANC_ASF_EN        0x00000002 /* ASF Enabled - RO */
-#define E1000_MANC_EN_BMC2OS     0x10000000 /* OSBMC is Enabled or not */
-/* Enable Neighbor Discovery Filtering */
-#define E1000_MANC_RCV_TCO_EN    0x00020000 /* Receive TCO Packets Enabled */
-#define E1000_MANC_BLK_PHY_RST_ON_IDE   0x00040000 /* Block phy resets */
-/* Enable MAC address filtering */
-#define E1000_MANC_EN_MAC_ADDR_FILTER   0x00100000
-
-/* Receive Control */
-#define E1000_RCTL_EN             0x00000002    /* enable */
-#define E1000_RCTL_SBP            0x00000004    /* store bad packet */
-#define E1000_RCTL_UPE            0x00000008    /* unicast promiscuous enable */
-#define E1000_RCTL_MPE            0x00000010    /* multicast promiscuous enab */
-#define E1000_RCTL_LPE            0x00000020    /* long packet enable */
-#define E1000_RCTL_LBM_MAC        0x00000040    /* MAC loopback mode */
-#define E1000_RCTL_LBM_TCVR       0x000000C0    /* tcvr loopback mode */
-#define E1000_RCTL_RDMTS_HALF     0x00000000    /* rx desc min threshold size */
-#define E1000_RCTL_MO_SHIFT       12            /* multicast offset shift */
-#define E1000_RCTL_BAM            0x00008000    /* broadcast enable */
-#define E1000_RCTL_SZ_512         0x00020000    /* rx buffer size 512 */
-#define E1000_RCTL_SZ_256         0x00030000    /* rx buffer size 256 */
-#define E1000_RCTL_VFE            0x00040000    /* vlan filter enable */
-#define E1000_RCTL_CFIEN          0x00080000    /* canonical form enable */
-#define E1000_RCTL_SECRC          0x04000000    /* Strip Ethernet CRC */
-
-/*
- * Use byte values for the following shift parameters
- * Usage:
- *     psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
- *                  E1000_PSRCTL_BSIZE0_MASK) |
- *                ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
- *                  E1000_PSRCTL_BSIZE1_MASK) |
- *                ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
- *                  E1000_PSRCTL_BSIZE2_MASK) |
- *                ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
- *                  E1000_PSRCTL_BSIZE3_MASK))
- * where value0 = [128..16256],  default=256
- *       value1 = [1024..64512], default=4096
- *       value2 = [0..64512],    default=4096
- *       value3 = [0..64512],    default=0
- */
-
-#define E1000_PSRCTL_BSIZE0_MASK   0x0000007F
-#define E1000_PSRCTL_BSIZE1_MASK   0x00003F00
-#define E1000_PSRCTL_BSIZE2_MASK   0x003F0000
-#define E1000_PSRCTL_BSIZE3_MASK   0x3F000000
-
-#define E1000_PSRCTL_BSIZE0_SHIFT  7            /* Shift _right_ 7 */
-#define E1000_PSRCTL_BSIZE1_SHIFT  2            /* Shift _right_ 2 */
-#define E1000_PSRCTL_BSIZE2_SHIFT  6            /* Shift _left_ 6 */
-#define E1000_PSRCTL_BSIZE3_SHIFT 14            /* Shift _left_ 14 */
-
-/* SWFW_SYNC Definitions */
-#define E1000_SWFW_EEP_SM   0x1
-#define E1000_SWFW_PHY0_SM  0x2
-#define E1000_SWFW_PHY1_SM  0x4
-#define E1000_SWFW_PHY2_SM  0x20
-#define E1000_SWFW_PHY3_SM  0x40
-
-/* FACTPS Definitions */
-/* Device Control */
-#define E1000_CTRL_FD       0x00000001  /* Full duplex.0=half; 1=full */
-#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
-#define E1000_CTRL_LRST     0x00000008  /* Link reset. 0=normal,1=reset */
-#define E1000_CTRL_ASDE     0x00000020  /* Auto-speed detect enable */
-#define E1000_CTRL_SLU      0x00000040  /* Set link up (Force Link) */
-#define E1000_CTRL_ILOS     0x00000080  /* Invert Loss-Of Signal */
-#define E1000_CTRL_SPD_SEL  0x00000300  /* Speed Select Mask */
-#define E1000_CTRL_SPD_100  0x00000100  /* Force 100Mb */
-#define E1000_CTRL_SPD_1000 0x00000200  /* Force 1Gb */
-#define E1000_CTRL_FRCSPD   0x00000800  /* Force Speed */
-#define E1000_CTRL_FRCDPX   0x00001000  /* Force Duplex */
-/* Defined polarity of Dock/Undock indication in SDP[0] */
-/* Reset both PHY ports, through PHYRST_N pin */
-/* enable link status from external LINK_0 and LINK_1 pins */
-#define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
-#define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
-#define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */
-#define E1000_CTRL_RST      0x04000000  /* Global reset */
-#define E1000_CTRL_RFCE     0x08000000  /* Receive Flow Control enable */
-#define E1000_CTRL_TFCE     0x10000000  /* Transmit flow control enable */
-#define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */
-#define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */
-/* Initiate an interrupt to manageability engine */
-#define E1000_CTRL_I2C_ENA  0x02000000  /* I2C enable */
-
-/* Bit definitions for the Management Data IO (MDIO) and Management Data
- * Clock (MDC) pins in the Device Control Register.
- */
-
-#define E1000_CONNSW_ENRGSRC             0x4
-#define E1000_PCS_CFG_PCS_EN             8
-#define E1000_PCS_LCTL_FLV_LINK_UP       1
-#define E1000_PCS_LCTL_FSV_100           2
-#define E1000_PCS_LCTL_FSV_1000          4
-#define E1000_PCS_LCTL_FDV_FULL          8
-#define E1000_PCS_LCTL_FSD               0x10
-#define E1000_PCS_LCTL_FORCE_LINK        0x20
-#define E1000_PCS_LCTL_FORCE_FCTRL       0x80
-#define E1000_PCS_LCTL_AN_ENABLE         0x10000
-#define E1000_PCS_LCTL_AN_RESTART        0x20000
-#define E1000_PCS_LCTL_AN_TIMEOUT        0x40000
-#define E1000_ENABLE_SERDES_LOOPBACK     0x0410
-
-#define E1000_PCS_LSTS_LINK_OK           1
-#define E1000_PCS_LSTS_SPEED_100         2
-#define E1000_PCS_LSTS_SPEED_1000        4
-#define E1000_PCS_LSTS_DUPLEX_FULL       8
-#define E1000_PCS_LSTS_SYNK_OK           0x10
-
-/* Device Status */
-#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
-#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
-#define E1000_STATUS_FUNC_MASK  0x0000000C      /* PCI Function Mask */
-#define E1000_STATUS_FUNC_SHIFT 2
-#define E1000_STATUS_FUNC_1     0x00000004      /* Function 1 */
-#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
-#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
-#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
-/* Change in Dock/Undock state. Clear on write '0'. */
-/* Status of Master requests. */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000
-/* BMC external code execution disabled */
-
-/* Constants used to intrepret the masked PCI-X bus speed. */
-
-#define SPEED_10    10
-#define SPEED_100   100
-#define SPEED_1000  1000
-#define HALF_DUPLEX 1
-#define FULL_DUPLEX 2
-
-
-#define ADVERTISE_10_HALF                 0x0001
-#define ADVERTISE_10_FULL                 0x0002
-#define ADVERTISE_100_HALF                0x0004
-#define ADVERTISE_100_FULL                0x0008
-#define ADVERTISE_1000_HALF               0x0010 /* Not used, just FYI */
-#define ADVERTISE_1000_FULL               0x0020
-
-/* 1000/H is not supported, nor spec-compliant. */
-#define E1000_ALL_SPEED_DUPLEX (ADVERTISE_10_HALF  |  ADVERTISE_10_FULL | \
-				ADVERTISE_100_HALF |  ADVERTISE_100_FULL | \
-						      ADVERTISE_1000_FULL)
-#define E1000_ALL_NOT_GIG      (ADVERTISE_10_HALF  |  ADVERTISE_10_FULL | \
-				ADVERTISE_100_HALF |  ADVERTISE_100_FULL)
-#define E1000_ALL_100_SPEED    (ADVERTISE_100_HALF |  ADVERTISE_100_FULL)
-#define E1000_ALL_10_SPEED     (ADVERTISE_10_HALF  |  ADVERTISE_10_FULL)
-#define E1000_ALL_FULL_DUPLEX  (ADVERTISE_10_FULL  |  ADVERTISE_100_FULL | \
-						      ADVERTISE_1000_FULL)
-#define E1000_ALL_HALF_DUPLEX  (ADVERTISE_10_HALF  |  ADVERTISE_100_HALF)
-
-#define AUTONEG_ADVERTISE_SPEED_DEFAULT   E1000_ALL_SPEED_DUPLEX
-
-/* LED Control */
-#define E1000_LEDCTL_LED0_MODE_SHIFT      0
-#define E1000_LEDCTL_LED0_BLINK           0x00000080
-
-#define E1000_LEDCTL_MODE_LED_ON        0xE
-#define E1000_LEDCTL_MODE_LED_OFF       0xF
-
-/* Transmit Descriptor bit definitions */
-#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_EOP    0x01000000 /* End of Packet */
-#define E1000_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_TXD_CMD_RS     0x08000000 /* Report Status */
-#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
-/* Extended desc bits for Linksec and timesync */
-
-/* Transmit Control */
-#define E1000_TCTL_EN     0x00000002    /* enable tx */
-#define E1000_TCTL_PSP    0x00000008    /* pad short packets */
-#define E1000_TCTL_CT     0x00000ff0    /* collision threshold */
-#define E1000_TCTL_COLD   0x003ff000    /* collision distance */
-#define E1000_TCTL_RTLC   0x01000000    /* Re-transmit on late collision */
-
-/* DMA Coalescing register fields */
-#define E1000_DMACR_DMACWT_MASK         0x00003FFF /* DMA Coalescing
-							* Watchdog Timer */
-#define E1000_DMACR_DMACTHR_MASK        0x00FF0000 /* DMA Coalescing Receive
-							* Threshold */
-#define E1000_DMACR_DMACTHR_SHIFT       16
-#define E1000_DMACR_DMAC_LX_MASK        0x30000000 /* Lx when no PCIe
-							* transactions */
-#define E1000_DMACR_DMAC_LX_SHIFT       28
-#define E1000_DMACR_DMAC_EN             0x80000000 /* Enable DMA Coalescing */
-
-#define E1000_DMCTXTH_DMCTTHR_MASK      0x00000FFF /* DMA Coalescing Transmit
-							* Threshold */
-
-#define E1000_DMCTLX_TTLX_MASK          0x00000FFF /* Time to LX request */
-
-#define E1000_DMCRTRH_UTRESH_MASK       0x0007FFFF /* Receive Traffic Rate
-							* Threshold */
-#define E1000_DMCRTRH_LRPRCW            0x80000000 /* Rcv packet rate in
-							* current window */
-
-#define E1000_DMCCNT_CCOUNT_MASK        0x01FFFFFF /* DMA Coal Rcv Traffic
-							* Current Cnt */
-
-#define E1000_FCRTC_RTH_COAL_MASK       0x0003FFF0 /* Flow ctrl Rcv Threshold
-							* High val */
-#define E1000_FCRTC_RTH_COAL_SHIFT      4
-#define E1000_PCIEMISC_LX_DECISION      0x00000080 /* Lx power decision */
-
-/* SerDes Control */
-#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
-
-/* Receive Checksum Control */
-#define E1000_RXCSUM_IPOFL     0x00000100   /* IPv4 checksum offload */
-#define E1000_RXCSUM_TUOFL     0x00000200   /* TCP / UDP checksum offload */
-#define E1000_RXCSUM_CRCOFL    0x00000800   /* CRC32 offload enable */
-#define E1000_RXCSUM_PCSD      0x00002000   /* packet checksum disabled */
-
-/* Header split receive */
-#define E1000_RFCTL_LEF        0x00040000
-
-/* Collision related configuration parameters */
-#define E1000_COLLISION_THRESHOLD       15
-#define E1000_CT_SHIFT                  4
-#define E1000_COLLISION_DISTANCE        63
-#define E1000_COLD_SHIFT                12
-
-/* Ethertype field values */
-#define ETHERNET_IEEE_VLAN_TYPE 0x8100  /* 802.3ac packet */
-
-#define MAX_JUMBO_FRAME_SIZE    0x3F00
-
-/* PBA constants */
-#define E1000_PBA_34K 0x0022
-#define E1000_PBA_64K 0x0040    /* 64KB */
-
-/* SW Semaphore Register */
-#define E1000_SWSM_SMBI         0x00000001 /* Driver Semaphore bit */
-#define E1000_SWSM_SWESMBI      0x00000002 /* FW Semaphore bit */
-
-/* Interrupt Cause Read */
-#define E1000_ICR_TXDW          0x00000001 /* Transmit desc written back */
-#define E1000_ICR_LSC           0x00000004 /* Link Status Change */
-#define E1000_ICR_RXSEQ         0x00000008 /* rx sequence error */
-#define E1000_ICR_RXDMT0        0x00000010 /* rx desc min. threshold (0) */
-#define E1000_ICR_RXT0          0x00000080 /* rx timer intr (ring 0) */
-#define E1000_ICR_VMMB          0x00000100 /* VM MB event */
-#define E1000_ICR_DRSTA         0x40000000 /* Device Reset Asserted */
-/* If this bit asserted, the driver should claim the interrupt */
-#define E1000_ICR_INT_ASSERTED  0x80000000
-/* LAN connected device generates an interrupt */
-#define E1000_ICR_DOUTSYNC      0x10000000 /* NIC DMA out of sync */
-
-/* Extended Interrupt Cause Read */
-#define E1000_EICR_RX_QUEUE0    0x00000001 /* Rx Queue 0 Interrupt */
-#define E1000_EICR_RX_QUEUE1    0x00000002 /* Rx Queue 1 Interrupt */
-#define E1000_EICR_RX_QUEUE2    0x00000004 /* Rx Queue 2 Interrupt */
-#define E1000_EICR_RX_QUEUE3    0x00000008 /* Rx Queue 3 Interrupt */
-#define E1000_EICR_TX_QUEUE0    0x00000100 /* Tx Queue 0 Interrupt */
-#define E1000_EICR_TX_QUEUE1    0x00000200 /* Tx Queue 1 Interrupt */
-#define E1000_EICR_TX_QUEUE2    0x00000400 /* Tx Queue 2 Interrupt */
-#define E1000_EICR_TX_QUEUE3    0x00000800 /* Tx Queue 3 Interrupt */
-#define E1000_EICR_OTHER        0x80000000 /* Interrupt Cause Active */
-/* TCP Timer */
-
-/*
- * This defines the bits that are set in the Interrupt Mask
- * Set/Read Register.  Each bit is documented below:
- *   o RXT0   = Receiver Timer Interrupt (ring 0)
- *   o TXDW   = Transmit Descriptor Written Back
- *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
- *   o RXSEQ  = Receive Sequence Error
- *   o LSC    = Link Status Change
- */
-#define IMS_ENABLE_MASK ( \
-    E1000_IMS_RXT0   |    \
-    E1000_IMS_TXDW   |    \
-    E1000_IMS_RXDMT0 |    \
-    E1000_IMS_RXSEQ  |    \
-    E1000_IMS_LSC    |    \
-    E1000_IMS_DOUTSYNC)
-
-/* Interrupt Mask Set */
-#define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
-#define E1000_IMS_LSC       E1000_ICR_LSC       /* Link Status Change */
-#define E1000_IMS_VMMB      E1000_ICR_VMMB      /* Mail box activity */
-#define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ     /* rx sequence error */
-#define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
-#define E1000_IMS_RXT0      E1000_ICR_RXT0      /* rx timer intr */
-#define E1000_IMS_DRSTA     E1000_ICR_DRSTA     /* Device Reset Asserted */
-#define E1000_IMS_DOUTSYNC  E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
-
-/* Extended Interrupt Mask Set */
-#define E1000_EIMS_OTHER        E1000_EICR_OTHER   /* Interrupt Cause Active */
-
-/* Interrupt Cause Set */
-#define E1000_ICS_LSC       E1000_ICR_LSC       /* Link Status Change */
-#define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
-#define E1000_ICS_DRSTA     E1000_ICR_DRSTA     /* Device Reset Aserted */
-
-/* Extended Interrupt Cause Set */
-
-/* Transmit Descriptor Control */
-/* Enable the counting of descriptors still to be processed. */
-
-/* Flow Control Constants */
-#define FLOW_CONTROL_ADDRESS_LOW  0x00C28001
-#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
-#define FLOW_CONTROL_TYPE         0x8808
-
-/* 802.1q VLAN Packet Size */
-#define VLAN_TAG_SIZE              4    /* 802.3ac tag (not DMA'd) */
-#define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */
-
-/* Receive Address */
-/*
- * Number of high/low register pairs in the RAR. The RAR (Receive Address
- * Registers) holds the directed and multicast addresses that we monitor.
- * Technically, we have 16 spots.  However, we reserve one of these spots
- * (RAR[15]) for our directed address used by controllers with
- * manageability enabled, allowing us room for 15 multicast addresses.
- */
-#define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */
-#define E1000_RAL_MAC_ADDR_LEN 4
-#define E1000_RAH_MAC_ADDR_LEN 2
-#define E1000_RAH_POOL_MASK 0x03FC0000
-#define E1000_RAH_POOL_1 0x00040000
-
-/* Error Codes */
-#define E1000_SUCCESS      0
-#define E1000_ERR_NVM      1
-#define E1000_ERR_PHY      2
-#define E1000_ERR_CONFIG   3
-#define E1000_ERR_PARAM    4
-#define E1000_ERR_MAC_INIT 5
-#define E1000_ERR_RESET   9
-#define E1000_ERR_MASTER_REQUESTS_PENDING 10
-#define E1000_BLK_PHY_RESET   12
-#define E1000_ERR_SWFW_SYNC 13
-#define E1000_NOT_IMPLEMENTED 14
-#define E1000_ERR_MBX      15
-#define E1000_ERR_INVALID_ARGUMENT  16
-#define E1000_ERR_NO_SPACE          17
-#define E1000_ERR_NVM_PBA_SECTION   18
-
-/* Loop limit on how long we wait for auto-negotiation to complete */
-#define COPPER_LINK_UP_LIMIT              10
-#define PHY_AUTO_NEG_LIMIT                45
-#define PHY_FORCE_LIMIT                   20
-/* Number of 100 microseconds we wait for PCI Express master disable */
-#define MASTER_DISABLE_TIMEOUT      800
-/* Number of milliseconds we wait for PHY configuration done after MAC reset */
-#define PHY_CFG_TIMEOUT             100
-/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
-/* Number of milliseconds for NVM auto read done after MAC reset. */
-#define AUTO_READ_DONE_TIMEOUT      10
-
-/* Flow Control */
-#define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */
-
-#define E1000_TSYNCTXCTL_VALID    0x00000001 /* tx timestamp valid */
-#define E1000_TSYNCTXCTL_ENABLED  0x00000010 /* enable tx timestampping */
-
-#define E1000_TSYNCRXCTL_VALID      0x00000001 /* rx timestamp valid */
-#define E1000_TSYNCRXCTL_TYPE_MASK  0x0000000E /* rx type mask */
-#define E1000_TSYNCRXCTL_TYPE_L2_V2       0x00
-#define E1000_TSYNCRXCTL_TYPE_L4_V1       0x02
-#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2    0x04
-#define E1000_TSYNCRXCTL_TYPE_ALL         0x08
-#define E1000_TSYNCRXCTL_TYPE_EVENT_V2    0x0A
-#define E1000_TSYNCRXCTL_ENABLED    0x00000010 /* enable rx timestampping */
-
-#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK   0x000000FF
-#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE       0x00
-#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE  0x01
-#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE   0x02
-#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03
-#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04
-
-#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK               0x00000F00
-#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE                 0x0000
-#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE            0x0100
-#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE       0x0200
-#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE      0x0300
-#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE             0x0800
-#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE           0x0900
-#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE  0x0A00
-#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE             0x0B00
-#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE           0x0C00
-#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE           0x0D00
-
-#define E1000_TIMINCA_16NS_SHIFT 24
-
-#define E1000_MDICNFG_EXT_MDIO    0x80000000      /* MDI ext/int destination */
-#define E1000_MDICNFG_COM_MDIO    0x40000000      /* MDI shared w/ lan 0 */
-#define E1000_MDICNFG_PHY_MASK    0x03E00000
-#define E1000_MDICNFG_PHY_SHIFT   21
-
-/* PCI Express Control */
-#define E1000_GCR_CMPL_TMOUT_MASK       0x0000F000
-#define E1000_GCR_CMPL_TMOUT_10ms       0x00001000
-#define E1000_GCR_CMPL_TMOUT_RESEND     0x00010000
-#define E1000_GCR_CAP_VER2              0x00040000
-
-/* mPHY Address Control and Data Registers */
-#define E1000_MPHY_ADDR_CTL          0x0024 /* mPHY Address Control Register */
-#define E1000_MPHY_ADDR_CTL_OFFSET_MASK 0xFFFF0000
-#define E1000_MPHY_DATA                 0x0E10 /* mPHY Data Register */
-
-/* mPHY PCS CLK Register */
-#define E1000_MPHY_PCS_CLK_REG_OFFSET  0x0004 /* mPHY PCS CLK AFE CSR Offset */
-/* mPHY Near End Digital Loopback Override Bit */
-#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10
-
-/* PHY Control Register */
-#define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */
-#define MII_CR_POWER_DOWN       0x0800  /* Power down */
-#define MII_CR_AUTO_NEG_EN      0x1000  /* Auto Neg Enable */
-#define MII_CR_LOOPBACK         0x4000  /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET            0x8000  /* 0 = normal, 1 = PHY reset */
-#define MII_CR_SPEED_1000       0x0040
-#define MII_CR_SPEED_100        0x2000
-#define MII_CR_SPEED_10         0x0000
-
-/* PHY Status Register */
-#define MII_SR_LINK_STATUS       0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_COMPLETE  0x0020 /* Auto Neg Complete */
-
-/* Autoneg Advertisement Register */
-#define NWAY_AR_10T_HD_CAPS      0x0020   /* 10T   Half Duplex Capable */
-#define NWAY_AR_10T_FD_CAPS      0x0040   /* 10T   Full Duplex Capable */
-#define NWAY_AR_100TX_HD_CAPS    0x0080   /* 100TX Half Duplex Capable */
-#define NWAY_AR_100TX_FD_CAPS    0x0100   /* 100TX Full Duplex Capable */
-#define NWAY_AR_PAUSE            0x0400   /* Pause operation desired */
-#define NWAY_AR_ASM_DIR          0x0800   /* Asymmetric Pause Direction bit */
-
-/* Link Partner Ability Register (Base Page) */
-#define NWAY_LPAR_PAUSE          0x0400 /* LP Pause operation desired */
-#define NWAY_LPAR_ASM_DIR        0x0800 /* LP Asymmetric Pause Direction bit */
-
-/* Autoneg Expansion Register */
-
-/* 1000BASE-T Control Register */
-#define CR_1000T_HD_CAPS         0x0100 /* Advertise 1000T HD capability */
-#define CR_1000T_FD_CAPS         0x0200 /* Advertise 1000T FD capability  */
-#define CR_1000T_MS_VALUE        0x0800 /* 1=Configure PHY as Master */
-					/* 0=Configure PHY as Slave */
-#define CR_1000T_MS_ENABLE       0x1000 /* 1=Master/Slave manual config value */
-					/* 0=Automatic Master/Slave config */
-
-/* 1000BASE-T Status Register */
-#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define SR_1000T_LOCAL_RX_STATUS  0x2000 /* Local receiver OK */
-
-
-/* PHY 1000 MII Register/Bit Definitions */
-/* PHY Registers defined by IEEE */
-#define PHY_CONTROL      0x00 /* Control Register */
-#define PHY_STATUS       0x01 /* Status Register */
-#define PHY_ID1          0x02 /* Phy Id Reg (word 1) */
-#define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
-#define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
-#define PHY_LP_ABILITY   0x05 /* Link Partner Ability (Base Page) */
-#define PHY_1000T_CTRL   0x09 /* 1000Base-T Control Reg */
-#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
-
-/* NVM Control */
-#define E1000_EECD_SK        0x00000001 /* NVM Clock */
-#define E1000_EECD_CS        0x00000002 /* NVM Chip Select */
-#define E1000_EECD_DI        0x00000004 /* NVM Data In */
-#define E1000_EECD_DO        0x00000008 /* NVM Data Out */
-#define E1000_EECD_REQ       0x00000040 /* NVM Access Request */
-#define E1000_EECD_GNT       0x00000080 /* NVM Access Grant */
-#define E1000_EECD_PRES      0x00000100 /* NVM Present */
-/* NVM Addressing bits based on type 0=small, 1=large */
-#define E1000_EECD_ADDR_BITS 0x00000400
-#define E1000_NVM_GRANT_ATTEMPTS   1000 /* NVM # attempts to gain grant */
-#define E1000_EECD_AUTO_RD          0x00000200  /* NVM Auto Read done */
-#define E1000_EECD_SIZE_EX_MASK     0x00007800  /* NVM Size */
-#define E1000_EECD_SIZE_EX_SHIFT     11
-
-/* Offset to data in NVM read/write registers */
-#define E1000_NVM_RW_REG_DATA   16
-#define E1000_NVM_RW_REG_DONE   2    /* Offset to READ/WRITE done bit */
-#define E1000_NVM_RW_REG_START  1    /* Start operation */
-#define E1000_NVM_RW_ADDR_SHIFT 2    /* Shift to the address bits */
-#define E1000_NVM_POLL_READ     0    /* Flag for polling for read complete */
-
-/* NVM Word Offsets */
-#define NVM_COMPAT                 0x0003
-#define NVM_ID_LED_SETTINGS        0x0004 /* SERDES output amplitude */
-#define NVM_INIT_CONTROL2_REG      0x000F
-#define NVM_INIT_CONTROL3_PORT_B   0x0014
-#define NVM_INIT_CONTROL3_PORT_A   0x0024
-#define NVM_ALT_MAC_ADDR_PTR       0x0037
-#define NVM_CHECKSUM_REG           0x003F
-#define NVM_COMPATIBILITY_REG_3    0x0003
-#define NVM_COMPATIBILITY_BIT_MASK 0x8000
-
-#define E1000_NVM_CFG_DONE_PORT_0  0x040000 /* MNG config cycle done */
-#define E1000_NVM_CFG_DONE_PORT_1  0x080000 /* ...for second port */
-#define E1000_NVM_CFG_DONE_PORT_2  0x100000 /* ...for third port */
-#define E1000_NVM_CFG_DONE_PORT_3  0x200000 /* ...for fourth port */
-
-#define NVM_82580_LAN_FUNC_OFFSET(a) (a ? (0x40 + (0x40 * a)) : 0)
-
-/* Mask bits for fields in Word 0x24 of the NVM */
-#define NVM_WORD24_COM_MDIO         0x0008 /* MDIO interface shared */
-#define NVM_WORD24_EXT_MDIO         0x0004 /* MDIO accesses routed external */
-
-/* Mask bits for fields in Word 0x0f of the NVM */
-#define NVM_WORD0F_PAUSE_MASK       0x3000
-#define NVM_WORD0F_ASM_DIR          0x2000
-
-/* Mask bits for fields in Word 0x1a of the NVM */
-
-/* length of string needed to store part num */
-#define E1000_PBANUM_LENGTH         11
-
-/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
-#define NVM_SUM                    0xBABA
-
-#define NVM_PBA_OFFSET_0           8
-#define NVM_PBA_OFFSET_1           9
-#define NVM_PBA_PTR_GUARD          0xFAFA
-#define NVM_WORD_SIZE_BASE_SHIFT   6
-
-/* NVM Commands - Microwire */
-
-/* NVM Commands - SPI */
-#define NVM_MAX_RETRY_SPI          5000 /* Max wait of 5ms, for RDY signal */
-#define NVM_WRITE_OPCODE_SPI       0x02 /* NVM write opcode */
-#define NVM_READ_OPCODE_SPI        0x03 /* NVM read opcode */
-#define NVM_A8_OPCODE_SPI          0x08 /* opcode bit-3 = address bit-8 */
-#define NVM_WREN_OPCODE_SPI        0x06 /* NVM set Write Enable latch */
-#define NVM_RDSR_OPCODE_SPI        0x05 /* NVM read Status register */
-
-/* SPI NVM Status Register */
-#define NVM_STATUS_RDY_SPI         0x01
-
-/* Word definitions for ID LED Settings */
-#define ID_LED_RESERVED_0000 0x0000
-#define ID_LED_RESERVED_FFFF 0xFFFF
-#define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2  << 12) | \
-			      (ID_LED_OFF1_OFF2 <<  8) | \
-			      (ID_LED_DEF1_DEF2 <<  4) | \
-			      (ID_LED_DEF1_DEF2))
-#define ID_LED_DEF1_DEF2     0x1
-#define ID_LED_DEF1_ON2      0x2
-#define ID_LED_DEF1_OFF2     0x3
-#define ID_LED_ON1_DEF2      0x4
-#define ID_LED_ON1_ON2       0x5
-#define ID_LED_ON1_OFF2      0x6
-#define ID_LED_OFF1_DEF2     0x7
-#define ID_LED_OFF1_ON2      0x8
-#define ID_LED_OFF1_OFF2     0x9
-
-#define IGP_ACTIVITY_LED_MASK   0xFFFFF0FF
-#define IGP_ACTIVITY_LED_ENABLE 0x0300
-#define IGP_LED3_MODE           0x07000000
-
-/* PCI/PCI-X/PCI-EX Config space */
-#define PCIE_DEVICE_CONTROL2         0x28
-#define PCIE_DEVICE_CONTROL2_16ms    0x0005
-
-#define PHY_REVISION_MASK      0xFFFFFFF0
-#define MAX_PHY_REG_ADDRESS    0x1F  /* 5 bit address bus (0-0x1F) */
-#define MAX_PHY_MULTI_PAGE_REG 0xF
-
-/* Bit definitions for valid PHY IDs. */
-/*
- * I = Integrated
- * E = External
- */
-#define M88E1111_I_PHY_ID    0x01410CC0
-#define M88E1112_E_PHY_ID    0x01410C90
-#define I347AT4_E_PHY_ID     0x01410DC0
-#define IGP03E1000_E_PHY_ID  0x02A80390
-#define I82580_I_PHY_ID      0x015403A0
-#define I350_I_PHY_ID        0x015403B0
-#define M88_VENDOR           0x0141
-
-/* M88E1000 Specific Registers */
-#define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
-#define M88E1000_PHY_SPEC_STATUS   0x11  /* PHY Specific Status Register */
-#define M88E1000_EXT_PHY_SPEC_CTRL 0x14  /* Extended PHY Specific Control */
-
-#define M88E1000_PHY_PAGE_SELECT   0x1D  /* Reg 29 for page number setting */
-#define M88E1000_PHY_GEN_CONTROL   0x1E  /* Its meaning depends on reg 29 */
-
-/* M88E1000 PHY Specific Control Register */
-#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
-/* 1=CLK125 low, 0=CLK125 toggling */
-#define M88E1000_PSCR_MDI_MANUAL_MODE  0x0000  /* MDI Crossover Mode bits 6:5 */
-					       /* Manual MDI configuration */
-#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020  /* Manual MDIX configuration */
-/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
-#define M88E1000_PSCR_AUTO_X_1000T     0x0040
-/* Auto crossover enabled all speeds */
-#define M88E1000_PSCR_AUTO_X_MODE      0x0060
-/*
- * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold
- * 0=Normal 10BASE-T Rx Threshold
- */
-/* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
-#define M88E1000_PSCR_ASSERT_CRS_ON_TX     0x0800 /* 1=Assert CRS on Transmit */
-
-/* M88E1000 PHY Specific Status Register */
-#define M88E1000_PSSR_REV_POLARITY       0x0002 /* 1=Polarity reversed */
-#define M88E1000_PSSR_DOWNSHIFT          0x0020 /* 1=Downshifted */
-#define M88E1000_PSSR_MDIX               0x0040 /* 1=MDIX; 0=MDI */
-/*
- * 0 = <50M
- * 1 = 50-80M
- * 2 = 80-110M
- * 3 = 110-140M
- * 4 = >140M
- */
-#define M88E1000_PSSR_CABLE_LENGTH       0x0380
-#define M88E1000_PSSR_SPEED              0xC000 /* Speed, bits 14:15 */
-#define M88E1000_PSSR_1000MBS            0x8000 /* 10=1000Mbs */
-
-#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
-
-/* M88E1000 Extended PHY Specific Control Register */
-/*
- * 1 = Lost lock detect enabled.
- * Will assert lost lock and bring
- * link down if idle not seen
- * within 1ms in 1000BASE-T
- */
-/*
- * Number of times we will attempt to autonegotiate before downshifting if we
- * are the master
- */
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X   0x0000
-/*
- * Number of times we will attempt to autonegotiate before downshifting if we
- * are the slave
- */
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK  0x0300
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X    0x0100
-#define M88E1000_EPSCR_TX_CLK_25      0x0070 /* 25  MHz TX_CLK */
-
-/* Intel i347-AT4 Registers */
-
-#define I347AT4_PCDL                   0x10 /* PHY Cable Diagnostics Length */
-#define I347AT4_PCDC                   0x15 /* PHY Cable Diagnostics Control */
-#define I347AT4_PAGE_SELECT            0x16
-
-/* i347-AT4 Extended PHY Specific Control Register */
-
-/*
- *  Number of times we will attempt to autonegotiate before downshifting if we
- *  are the master
- */
-#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800
-#define I347AT4_PSCR_DOWNSHIFT_MASK   0x7000
-#define I347AT4_PSCR_DOWNSHIFT_1X     0x0000
-#define I347AT4_PSCR_DOWNSHIFT_2X     0x1000
-#define I347AT4_PSCR_DOWNSHIFT_3X     0x2000
-#define I347AT4_PSCR_DOWNSHIFT_4X     0x3000
-#define I347AT4_PSCR_DOWNSHIFT_5X     0x4000
-#define I347AT4_PSCR_DOWNSHIFT_6X     0x5000
-#define I347AT4_PSCR_DOWNSHIFT_7X     0x6000
-#define I347AT4_PSCR_DOWNSHIFT_8X     0x7000
-
-/* i347-AT4 PHY Cable Diagnostics Control */
-#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */
-
-/* Marvell 1112 only registers */
-#define M88E1112_VCT_DSP_DISTANCE       0x001A
-
-/* M88EC018 Rev 2 specific DownShift settings */
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X    0x0800
-
-/* MDI Control */
-#define E1000_MDIC_DATA_MASK 0x0000FFFF
-#define E1000_MDIC_REG_MASK  0x001F0000
-#define E1000_MDIC_REG_SHIFT 16
-#define E1000_MDIC_PHY_MASK  0x03E00000
-#define E1000_MDIC_PHY_SHIFT 21
-#define E1000_MDIC_OP_WRITE  0x04000000
-#define E1000_MDIC_OP_READ   0x08000000
-#define E1000_MDIC_READY     0x10000000
-#define E1000_MDIC_INT_EN    0x20000000
-#define E1000_MDIC_ERROR     0x40000000
-#define E1000_MDIC_DEST      0x80000000
-
-/* Thermal Sensor */
-#define E1000_THSTAT_PWR_DOWN       0x00000001 /* Power Down Event */
-#define E1000_THSTAT_LINK_THROTTLE  0x00000002 /* Link Speed Throttle Event */
-
-/* Energy Efficient Ethernet */
-#define E1000_IPCNFG_EEE_1G_AN       0x00000008  /* EEE Enable 1G AN */
-#define E1000_IPCNFG_EEE_100M_AN     0x00000004  /* EEE Enable 100M AN */
-#define E1000_EEER_TX_LPI_EN         0x00010000  /* EEE Tx LPI Enable */
-#define E1000_EEER_RX_LPI_EN         0x00020000  /* EEE Rx LPI Enable */
-#define E1000_EEER_LPI_FC            0x00040000  /* EEE Enable on FC */
-
-/* SerDes Control */
-#define E1000_GEN_CTL_READY             0x80000000
-#define E1000_GEN_CTL_ADDRESS_SHIFT     8
-#define E1000_GEN_POLL_TIMEOUT          640
-
-#define E1000_VFTA_ENTRY_SHIFT               5
-#define E1000_VFTA_ENTRY_MASK                0x7F
-#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK      0x1F
-
-/* DMA Coalescing register fields */
-#define E1000_PCIEMISC_LX_DECISION      0x00000080 /* Lx power decision based
-                                                      on DMA coal */
-
-/* Tx Rate-Scheduler Config fields */
-#define E1000_RTTBCNRC_RS_ENA		0x80000000
-#define E1000_RTTBCNRC_RF_DEC_MASK	0x00003FFF
-#define E1000_RTTBCNRC_RF_INT_SHIFT	14
-#define E1000_RTTBCNRC_RF_INT_MASK	\
-	(E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT)
-
-#endif