[IrDA]: Irport removal - part 1

This patch removes IrPORT and the old dongle drivers (all off them
have replacement drivers).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 141 deletions

diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 65806956728..ce816ba9c40 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -190,147 +190,6 @@ config KS959_DONGLE
 	  To compile it as a module, choose M here: the module will be called
 	  ks959-sir.
 
-comment "Old SIR device drivers"
-
-config IRPORT_SIR
-	tristate "IrPORT (IrDA serial driver)"
-	depends on IRDA && BROKEN_ON_SMP
-	---help---
-	  Say Y here if you want to build support for the IrPORT IrDA device
-	  driver.  To compile it as a module, choose M here: the module will be
-	  called irport. IrPORT can be used instead of IrTTY and sometimes
-	  this can be better.  One example is if your IrDA port does not
-	  have echo-canceling, which will work OK with IrPORT since this
-	  driver is working in half-duplex mode only.  You don't need to use
-	  irattach with IrPORT, but you just insert it the same way as FIR
-	  drivers (insmod irport io=0x3e8 irq=11).  Notice that IrPORT is a
-	  SIR device driver which means that speed is limited to 115200 bps.
-
-	  If unsure, say Y.
-
-comment "Old Serial dongle support"
-
-config DONGLE_OLD
-	bool "Old Serial dongle support"
-	depends on IRPORT_SIR && BROKEN_ON_SMP
-	help
-	  Say Y here if you have an infrared device that connects to your
-	  computer's serial port. These devices are called dongles. Then say Y
-	  or M to the driver for your particular dongle below.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about serial dongles.
-
-config ESI_DONGLE_OLD
-	tristate "ESI JetEye PC dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Extended Systems
-	  JetEye PC dongle.  To compile it as a module, choose M here.  The ESI
-	  dongle attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for ESI
-	  dongles you will have to start irattach like this:
-	  "irattach -d esi".
-
-config ACTISYS_DONGLE_OLD
-	tristate "ACTiSYS IR-220L and IR220L+ dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the ACTiSYS IR-220L and
-	  IR220L+ dongles.  To compile it as a module, choose M here.  The
-	  ACTiSYS dongles attaches to the normal 9-pin serial port connector,
-	  and can currently only be used by IrTTY.  To activate support for
-	  ACTiSYS dongles you will have to start irattach like this:
-	  "irattach -d actisys" or "irattach -d actisys+".
-
-config TEKRAM_DONGLE_OLD
-	tristate "Tekram IrMate 210B dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Tekram IrMate 210B
-	  dongle.  To compile it as a module, choose M here.  The Tekram dongle
-	  attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for Tekram
-	  dongles you will have to start irattach like this:
-	  "irattach -d tekram".
-
-config GIRBIL_DONGLE_OLD
-	tristate "Greenwich GIrBIL dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Greenwich GIrBIL
-	  dongle.  To compile it as a module, choose M here.  The Greenwich
-	  dongle attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for Greenwich
-	  dongles you will have to insert "irattach -d girbil" in the
-	  /etc/irda/drivers script.
-
-config LITELINK_DONGLE_OLD
-	tristate "Parallax LiteLink dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Parallax Litelink
-	  dongle.  To compile it as a module, choose M here.  The Parallax
-	  dongle attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for Parallax
-	  dongles you will have to start irattach like this:
-	  "irattach -d litelink".
-
-config MCP2120_DONGLE_OLD
-	tristate "Microchip MCP2120"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Microchip MCP2120
-	  dongle.  To compile it as a module, choose M here.  The MCP2120 dongle
-	  attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for MCP2120
-	  dongles you will have to insert "irattach -d mcp2120" in the
-	  /etc/irda/drivers script.
-
-	  You must build this dongle yourself.  For more information see:
-	  <http://www.eyetap.org/~tangf/irda_sir_linux.html>
-
-config OLD_BELKIN_DONGLE_OLD
-	tristate "Old Belkin dongle"
-	depends on DONGLE_OLD && IRDA
-	help
-	  Say Y here if you want to build support for the Adaptec Airport 1000
-	  and 2000 dongles.  To compile it as a module, choose M here: the module
-	  will be called old_belkin.  Some information is contained in the
-	  comments at the top of <file:drivers/net/irda/old_belkin.c>.
-
-config ACT200L_DONGLE_OLD
-	tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
-	depends on DONGLE_OLD && EXPERIMENTAL && IRDA
-	help
-	  Say Y here if you want to build support for the ACTiSYS IR-200L
-	  dongle.  To compile it as a module, choose M here.  The ACTiSYS
-	  IR-200L dongle attaches to the normal 9-pin serial port connector,
-	  and can currently only be used by IrTTY. To activate support for
-	  ACTiSYS IR-200L dongles you will have to start irattach like this:
-	  "irattach -d act200l".
-
-config MA600_DONGLE_OLD
-	tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
-	depends on DONGLE_OLD && EXPERIMENTAL && IRDA
-	---help---
-	  Say Y here if you want to build support for the Mobile Action MA600
-	  dongle.  To compile it as a module, choose M here. The MA600 dongle
-	  attaches to the normal 9-pin serial port connector, and can
-	  currently only be tested on IrCOMM.  To activate support for MA600
-	  dongles you will have to insert "irattach -d ma600" in the
-	  /etc/irda/drivers script.  Note: irutils 0.9.15 requires no
-	  modification. irutils 0.9.9 needs modification. For more
-	  information, download the following tar gzip file.
-
-	  There is a pre-compiled module on
-	  <http://engsvr.ust.hk/~eetwl95/ma600.html>
-
-config EP7211_IR
-	tristate "EP7211 I/R support"
-	depends on DONGLE_OLD && ARCH_EP7211 && IRDA
-
 comment "FIR device drivers"
 
 config USB_IRDA