diff options
| author | Manuel Lauss <manuel.lauss@googlemail.com> | 2011-11-10 12:06:22 +0000 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2011-12-07 22:02:07 +0000 |
| commit | f59c811f8c44e60a59783e3337594da638a48dff (patch) | |
| tree | 673e070d8affa4703b3c6c686b4a93b366b68a4c /drivers/net/irda/au1k_ir.c | |
| parent | 6f7c8623db005889ee35a602e0c2564ea06cd3ff (diff) | |
MIPS: Alchemy: one kernel for DB1000/DB1500/DB1100
These 3 boards are very similar; with this patch a single kernel image
which runs on all three can be built.
Tested on DB1500 and DB1100.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2872/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'drivers/net/irda/au1k_ir.c')
| -rw-r--r-- | drivers/net/irda/au1k_ir.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c index d1a77ef9b9e..670bb059121 100644 --- a/drivers/net/irda/au1k_ir.c +++ b/drivers/net/irda/au1k_ir.c @@ -32,7 +32,7 @@ #include <asm/irq.h> #include <asm/io.h> #include <asm/au1000.h> -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) +#if defined(CONFIG_MIPS_DB1000) #include <asm/mach-db1x00/bcsr.h> #else #error au1k_ir: unsupported board @@ -274,7 +274,7 @@ static int au1k_irda_net_init(struct net_device *dev) aup->tx_db_inuse[i] = pDB; } -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) +#if defined(CONFIG_MIPS_DB1000) /* power on */ bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, BCSR_RESETS_IRDA_MODE_FULL); @@ -662,7 +662,7 @@ au1k_irda_set_speed(struct net_device *dev, int speed) u32 control; int ret = 0, timeout = 10, i; volatile ring_dest_t *ptxd; -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) +#if defined(CONFIG_MIPS_DB1000) unsigned long irda_resets; #endif @@ -711,14 +711,14 @@ au1k_irda_set_speed(struct net_device *dev, int speed) } if (speed == 4000000) { -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) +#if defined(CONFIG_MIPS_DB1000) bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_FIR_SEL); #else /* Pb1000 and Pb1100 */ writel(1<<13, CPLD_AUX1); #endif } else { -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) +#if defined(CONFIG_MIPS_DB1000) bcsr_mod(BCSR_RESETS, BCSR_RESETS_FIR_SEL, 0); #else /* Pb1000 and Pb1100 */ writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1); |