irda: replace __FUNCTION__ with __func__

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 56 insertions, 56 deletions

diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index 18d17143537..8583d951a6a 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -223,7 +223,7 @@ static int __init nsc_ircc_init(void)
 
 	/* Probe for all the NSC chipsets we know about */
 	for (chip = chips; chip->name ; chip++) {
-		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
+		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__,
 			   chip->name);
 		
 		/* Try all config registers for this chip */
@@ -235,7 +235,7 @@ static int __init nsc_ircc_init(void)
 			/* Read index register */
 			reg = inb(cfg_base);
 			if (reg == 0xff) {
-				IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base);
+				IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __func__, cfg_base);
 				continue;
 			}
 			
@@ -244,7 +244,7 @@ static int __init nsc_ircc_init(void)
 			id = inb(cfg_base+1);
 			if ((id & chip->cid_mask) == chip->cid_value) {
 				IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
-					   __FUNCTION__, chip->name, id & ~chip->cid_mask);
+					   __func__, chip->name, id & ~chip->cid_mask);
 
 				/*
 				 * If we found a correct PnP setting,
@@ -295,7 +295,7 @@ static int __init nsc_ircc_init(void)
 				}
 				i++;
 			} else {
-				IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id);
+				IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __func__, id);
 			}
 		} 
 	}
@@ -345,7 +345,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	void *ret;
 	int err, chip_index;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 
  	for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
@@ -354,7 +354,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	}
 
 	if (chip_index == ARRAY_SIZE(dev_self)) {
-		IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -369,7 +369,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	dev = alloc_irdadev(sizeof(struct nsc_ircc_cb));
 	if (dev == NULL) {
 		IRDA_ERROR("%s(), can't allocate memory for "
-			   "control block!\n", __FUNCTION__);
+			   "control block!\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -393,7 +393,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 	ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
 	if (!ret) {
 		IRDA_WARNING("%s(), can't get iobase of 0x%03x\n",
-			     __FUNCTION__, self->io.fir_base);
+			     __func__, self->io.fir_base);
 		err = -ENODEV;
 		goto out1;
 	}
@@ -450,7 +450,7 @@ static int __init nsc_ircc_open(chipio_t *info)
 
 	err = register_netdev(dev);
 	if (err) {
-		IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+		IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
 		goto out4;
 	}
 	IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
@@ -506,7 +506,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
 {
 	int iobase;
 
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
@@ -519,7 +519,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
 
 	/* Release the PORT that this driver is using */
 	IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", 
-		   __FUNCTION__, self->io.fir_base);
+		   __func__, self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 
 	if (self->tx_buff.head)
@@ -557,7 +557,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
 	case 0x2e8: outb(0x15, cfg_base+1); break;
 	case 0x3f8: outb(0x16, cfg_base+1); break;
 	case 0x2f8: outb(0x17, cfg_base+1); break;
-	default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__);
+	default: IRDA_ERROR("%s(), invalid base_address", __func__);
 	}
 	
 	/* Control Signal Routing Register (CSRT) */
@@ -569,7 +569,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
 	case 9:  temp = 0x05; break;
 	case 11: temp = 0x06; break;
 	case 15: temp = 0x07; break;
-	default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__);
+	default: IRDA_ERROR("%s(), invalid irq", __func__);
 	}
 	outb(CFG_108_CSRT, cfg_base);
 	
@@ -577,7 +577,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
 	case 0: outb(0x08+temp, cfg_base+1); break;
 	case 1: outb(0x10+temp, cfg_base+1); break;
 	case 3: outb(0x18+temp, cfg_base+1); break;
-	default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__);
+	default: IRDA_ERROR("%s(), invalid dma", __func__);
 	}
 	
 	outb(CFG_108_MCTL, cfg_base);      /* Mode Control Register (MCTL) */
@@ -616,7 +616,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
 		break;
 	}
 	info->sir_base = info->fir_base;
-	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__,
+	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__,
 		   info->fir_base);
 
 	/* Read control signals routing register (CSRT) */
@@ -649,7 +649,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
 		info->irq = 15;
 		break;
 	}
-	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
+	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
 
 	/* Currently we only read Rx DMA but it will also be used for Tx */
 	switch ((reg >> 3) & 0x03) {
@@ -666,7 +666,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info)
 		info->dma = 3;
 		break;
 	}
-	IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
+	IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
 
 	/* Read mode control register (MCTL) */
 	outb(CFG_108_MCTL, cfg_base);
@@ -823,7 +823,7 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
 	/* User is sure about his config... accept it. */
 	IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
 		   "io=0x%04x, irq=%d, dma=%d\n", 
-		   __FUNCTION__, info->fir_base, info->irq, info->dma);
+		   __func__, info->fir_base, info->irq, info->dma);
 
 	/* Access bank for SP2 */
 	outb(CFG_39X_LDN, cfg_base);
@@ -864,7 +864,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
 	int enabled, susp;
 
 	IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
-		   __FUNCTION__, cfg_base);
+		   __func__, cfg_base);
 
 	/* This function should be executed with irq off to avoid
 	 * another driver messing with the Super I/O bank - Jean II */
@@ -898,7 +898,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
 	outb(CFG_39X_SPC, cfg_base);
 	susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
 
-	IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
+	IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __func__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
 
 	/* Configure SP2 */
 
@@ -950,7 +950,7 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i
 		pnp_info.dma = pnp_dma(dev, 0);
 
 	IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
-		   __FUNCTION__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
+		   __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
 
 	if((pnp_info.fir_base == 0) ||
 	   (pnp_info.irq == -1) || (pnp_info.dma == -1)) {
@@ -979,7 +979,7 @@ static int nsc_ircc_setup(chipio_t *info)
 	version = inb(iobase+MID);
 
 	IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
-		   __FUNCTION__, driver_name, version);
+		   __func__, driver_name, version);
 
 	/* Should be 0x2? */
 	if (0x20 != (version & 0xf0)) {
@@ -1083,30 +1083,30 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
 	case 0x00: /* same as */
 	case 0x01: /* Differential serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x02: /* same as */
 	case 0x03: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x04: /* Sharp RY5HD01 */
 		break;
 	case 0x05: /* Reserved, but this is what the Thinkpad reports */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x06: /* Single-ended serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x07: /* Consumer-IR only */
 		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
 		IRDA_DEBUG(0, "%s(), %s\n",
-			   __FUNCTION__, dongle_types[dongle_id]);
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
 		outb(0x28, iobase+7); /* Set irsl[0-2] as output */
@@ -1114,7 +1114,7 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
 	case 0x0A: /* same as */
 	case 0x0B: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x0C: /* same as */
 	case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1129,14 +1129,14 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
 		break;
 	case 0x0F: /* No dongle connected */
 		IRDA_DEBUG(0, "%s(), %s\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 
 		switch_bank(iobase, BANK0);
 		outb(0x62, iobase+MCR);
 		break;
 	default: 
 		IRDA_DEBUG(0, "%s(), invalid dongle_id %#x", 
-			   __FUNCTION__, dongle_id);
+			   __func__, dongle_id);
 	}
 	
 	/* IRCFG1: IRSL1 and 2 are set to IrDA mode */
@@ -1168,30 +1168,30 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
 	case 0x00: /* same as */
 	case 0x01: /* Differential serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x02: /* same as */
 	case 0x03: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x04: /* Sharp RY5HD01 */
 		break;
 	case 0x05: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x06: /* Single-ended serial interface */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x07: /* Consumer-IR only */
 		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
 		IRDA_DEBUG(0, "%s(), %s\n", 
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		outb(0x00, iobase+4);
 		if (speed > 115200)
 			outb(0x01, iobase+4);
@@ -1210,7 +1210,7 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
 	case 0x0A: /* same as */
 	case 0x0B: /* Reserved */
 		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __FUNCTION__, dongle_types[dongle_id]); 
+			   __func__, dongle_types[dongle_id]);
 		break;
 	case 0x0C: /* same as */
 	case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1219,13 +1219,13 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
 		break;
 	case 0x0F: /* No dongle connected */
 		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __FUNCTION__, dongle_types[dongle_id]);
+			   __func__, dongle_types[dongle_id]);
 
 		switch_bank(iobase, BANK0); 
 		outb(0x62, iobase+MCR);
 		break;
 	default: 
-		IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), invalid data_rate\n", __func__);
 	}
 	/* Restore bank register */
 	outb(bank, iobase+BSR);
@@ -1246,7 +1246,7 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
 	__u8 bank;
 	__u8 ier;                  /* Interrupt enable register */
 
-	IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed);
+	IRDA_DEBUG(2, "%s(), speed=%d\n", __func__, speed);
 
 	IRDA_ASSERT(self != NULL, return 0;);
 
@@ -1279,20 +1279,20 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
 		outb(inb(iobase+4) | 0x04, iobase+4);
 	       
 		mcr = MCR_MIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
 		break;
 	case 1152000:
 		mcr = MCR_MIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__);
 		break;
 	case 4000000:
 		mcr = MCR_FIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__);
+		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__);
 		break;
 	default:
 		mcr = MCR_FIR;
 		IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", 
-			   __FUNCTION__, speed);
+			   __func__, speed);
 		break;
 	}
 
@@ -1597,7 +1597,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	int actual = 0;
 	__u8 bank;
 	
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 
 	/* Save current bank */
 	bank = inb(iobase+BSR);
@@ -1605,7 +1605,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	switch_bank(iobase, BANK0);
 	if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
 		IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
-			   __FUNCTION__);
+			   __func__);
 
 		/* FIFO may still be filled to the Tx interrupt threshold */
 		fifo_size -= 17;
@@ -1618,7 +1618,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
 	}
         
 	IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
-		   __FUNCTION__, fifo_size, actual, len);
+		   __func__, fifo_size, actual, len);
 	
 	/* Restore bank */
 	outb(bank, iobase+BSR);
@@ -1639,7 +1639,7 @@ static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)
 	__u8 bank;
 	int ret = TRUE;
 
-	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(2, "%s()\n", __func__);
 
 	iobase = self->io.fir_base;
 
@@ -1770,7 +1770,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
 		len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
 
 		if (st_fifo->tail >= MAX_RX_WINDOW) {
-			IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__);
+			IRDA_DEBUG(0, "%s(), window is full!\n", __func__);
 			continue;
 		}
 			
@@ -1862,7 +1862,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
 			if (skb == NULL)  {
 				IRDA_WARNING("%s(), memory squeeze, "
 					     "dropping frame.\n",
-					     __FUNCTION__);
+					     __func__);
 				self->stats.rx_dropped++;
 
 				/* Restore bank register */
@@ -1968,7 +1968,7 @@ static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir)
 		 * Need to be after self->io.direction to avoid race with
 		 * nsc_ircc_hard_xmit_sir() - Jean II */
 		if (self->new_speed) {
-			IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__);
+			IRDA_DEBUG(2, "%s(), Changing speed!\n", __func__);
 			self->ier = nsc_ircc_change_speed(self,
 							  self->new_speed);
 			self->new_speed = 0;
@@ -2054,7 +2054,7 @@ static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase,
 				} else
 					IRDA_WARNING("%s(), potential "
 						     "Tx queue lockup !\n",
-						     __FUNCTION__);
+						     __func__);
 			}
 		} else {
 			/*  Not finished yet, so interrupt on DMA again */
@@ -2163,7 +2163,7 @@ static int nsc_ircc_net_open(struct net_device *dev)
 	char hwname[32];
 	__u8 bank;
 	
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = (struct nsc_ircc_cb *) dev->priv;
@@ -2225,7 +2225,7 @@ static int nsc_ircc_net_close(struct net_device *dev)
 	int iobase;
 	__u8 bank;
 
-	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_DEBUG(4, "%s()\n", __func__);
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -2279,7 +2279,7 @@ static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 	
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */