Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 2222 insertions, 0 deletions

diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
new file mode 100644
index 00000000000..805714ec9a8
--- /dev/null
+++ b/drivers/net/irda/nsc-ircc.c
@@ -0,0 +1,2222 @@
+/*********************************************************************
+ *                
+ * Filename:      nsc-ircc.c
+ * Version:       1.0
+ * Description:   Driver for the NSC PC'108 and PC'338 IrDA chipsets
+ * Status:        Stable.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sat Nov  7 21:43:15 1998
+ * Modified at:   Wed Mar  1 11:29:34 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
+ *     Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
+ *     Copyright (c) 1998 Actisys Corp., www.actisys.com
+ *     All Rights Reserved
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ *     Notice that all functions that needs to access the chip in _any_
+ *     way, must save BSR register on entry, and restore it on exit. 
+ *     It is _very_ important to follow this policy!
+ *
+ *         __u8 bank;
+ *     
+ *         bank = inb(iobase+BSR);
+ *  
+ *         do_your_stuff_here();
+ *
+ *         outb(bank, iobase+BSR);
+ *
+ *    If you find bugs in this file, its very likely that the same bug
+ *    will also be in w83977af_ir.c since the implementations are quite
+ *    similar.
+ *     
+ ********************************************************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/rtnetlink.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/byteorder.h>
+
+#include <linux/pm.h>
+
+#include <net/irda/wrapper.h>
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+
+#include "nsc-ircc.h"
+
+#define CHIP_IO_EXTENT 8
+#define BROKEN_DONGLE_ID
+
+static char *driver_name = "nsc-ircc";
+
+/* Module parameters */
+static int qos_mtt_bits = 0x07;  /* 1 ms or more */
+static int dongle_id;
+
+/* Use BIOS settions by default, but user may supply module parameters */
+static unsigned int io[]  = { ~0, ~0, ~0, ~0 };
+static unsigned int irq[] = { 0, 0, 0, 0, 0 };
+static unsigned int dma[] = { 0, 0, 0, 0, 0 };
+
+static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info);
+
+/* These are the known NSC chips */
+static nsc_chip_t chips[] = {
+/*  Name, {cfg registers}, chip id index reg, chip id expected value, revision mask */
+	{ "PC87108", { 0x150, 0x398, 0xea }, 0x05, 0x10, 0xf0, 
+	  nsc_ircc_probe_108, nsc_ircc_init_108 },
+	{ "PC87338", { 0x398, 0x15c, 0x2e }, 0x08, 0xb0, 0xf8, 
+	  nsc_ircc_probe_338, nsc_ircc_init_338 },
+	/* Contributed by Steffen Pingel - IBM X40 */
+	{ "PC8738x", { 0x164e, 0x4e, 0x0 }, 0x20, 0xf4, 0xff,
+	  nsc_ircc_probe_39x, nsc_ircc_init_39x },
+	/* Contributed by Jan Frey - IBM A30/A31 */
+	{ "PC8739x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xea, 0xff, 
+	  nsc_ircc_probe_39x, nsc_ircc_init_39x },
+	{ NULL }
+};
+
+/* Max 4 instances for now */
+static struct nsc_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
+
+static char *dongle_types[] = {
+	"Differential serial interface",
+	"Differential serial interface",
+	"Reserved",
+	"Reserved",
+	"Sharp RY5HD01",
+	"Reserved",
+	"Single-ended serial interface",
+	"Consumer-IR only",
+	"HP HSDL-2300, HP HSDL-3600/HSDL-3610",
+	"IBM31T1100 or Temic TFDS6000/TFDS6500",
+	"Reserved",
+	"Reserved",
+	"HP HSDL-1100/HSDL-2100",
+	"HP HSDL-1100/HSDL-2100",
+	"Supports SIR Mode only",
+	"No dongle connected",
+};
+
+/* Some prototypes */
+static int  nsc_ircc_open(int i, chipio_t *info);
+static int  nsc_ircc_close(struct nsc_ircc_cb *self);
+static int  nsc_ircc_setup(chipio_t *info);
+static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self);
+static int  nsc_ircc_dma_receive(struct nsc_ircc_cb *self); 
+static int  nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase);
+static int  nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
+static int  nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
+static int  nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size);
+static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase);
+static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 baud);
+static int  nsc_ircc_is_receiving(struct nsc_ircc_cb *self);
+static int  nsc_ircc_read_dongle_id (int iobase);
+static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id);
+
+static int  nsc_ircc_net_open(struct net_device *dev);
+static int  nsc_ircc_net_close(struct net_device *dev);
+static int  nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev);
+static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data);
+
+/*
+ * Function nsc_ircc_init ()
+ *
+ *    Initialize chip. Just try to find out how many chips we are dealing with
+ *    and where they are
+ */
+static int __init nsc_ircc_init(void)
+{
+	chipio_t info;
+	nsc_chip_t *chip;
+	int ret = -ENODEV;
+	int cfg_base;
+	int cfg, id;
+	int reg;
+	int i = 0;
+
+	/* Probe for all the NSC chipsets we know about */
+	for (chip=chips; chip->name ; chip++) {
+		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
+			   chip->name);
+		
+		/* Try all config registers for this chip */
+		for (cfg=0; cfg<3; cfg++) {
+			cfg_base = chip->cfg[cfg];
+			if (!cfg_base)
+				continue;
+			
+			memset(&info, 0, sizeof(chipio_t));
+			info.cfg_base = cfg_base;
+			info.fir_base = io[i];
+			info.dma = dma[i];
+			info.irq = irq[i];
+
+			/* Read index register */
+			reg = inb(cfg_base);
+			if (reg == 0xff) {
+				IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base);
+				continue;
+			}
+			
+			/* Read chip identification register */
+			outb(chip->cid_index, cfg_base);
+			id = inb(cfg_base+1);
+			if ((id & chip->cid_mask) == chip->cid_value) {
+				IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
+					   __FUNCTION__, chip->name, id & ~chip->cid_mask);
+				/* 
+				 * If the user supplies the base address, then
+				 * we init the chip, if not we probe the values
+				 * set by the BIOS
+				 */				
+				if (io[i] < 0x2000) {
+					chip->init(chip, &info);
+				} else
+					chip->probe(chip, &info);
+
+				if (nsc_ircc_open(i, &info) == 0)
+					ret = 0;
+				i++;
+			} else {
+				IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id);
+			}
+		} 
+		
+	}
+
+	return ret;
+}
+
+/*
+ * Function nsc_ircc_cleanup ()
+ *
+ *    Close all configured chips
+ *
+ */
+static void __exit nsc_ircc_cleanup(void)
+{
+	int i;
+
+	pm_unregister_all(nsc_ircc_pmproc);
+
+	for (i=0; i < 4; i++) {
+		if (dev_self[i])
+			nsc_ircc_close(dev_self[i]);
+	}
+}
+
+/*
+ * Function nsc_ircc_open (iobase, irq)
+ *
+ *    Open driver instance
+ *
+ */
+static int __init nsc_ircc_open(int i, chipio_t *info)
+{
+	struct net_device *dev;
+	struct nsc_ircc_cb *self;
+        struct pm_dev *pmdev;
+	void *ret;
+	int err;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name,
+		     info->cfg_base);
+
+	if ((nsc_ircc_setup(info)) == -1)
+		return -1;
+
+	IRDA_MESSAGE("%s, driver loaded (Dag Brattli)\n", driver_name);
+
+	dev = alloc_irdadev(sizeof(struct nsc_ircc_cb));
+	if (dev == NULL) {
+		IRDA_ERROR("%s(), can't allocate memory for "
+			   "control block!\n", __FUNCTION__);
+		return -ENOMEM;
+	}
+
+	self = dev->priv;
+	self->netdev = dev;
+	spin_lock_init(&self->lock);
+   
+	/* Need to store self somewhere */
+	dev_self[i] = self;
+	self->index = i;
+
+	/* Initialize IO */
+	self->io.cfg_base  = info->cfg_base;
+	self->io.fir_base  = info->fir_base;
+        self->io.irq       = info->irq;
+        self->io.fir_ext   = CHIP_IO_EXTENT;
+        self->io.dma       = info->dma;
+        self->io.fifo_size = 32;
+	
+	/* Reserve the ioports that we need */
+	ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name);
+	if (!ret) {
+		IRDA_WARNING("%s(), can't get iobase of 0x%03x\n",
+			     __FUNCTION__, self->io.fir_base);
+		err = -ENODEV;
+		goto out1;
+	}
+
+	/* Initialize QoS for this device */
+	irda_init_max_qos_capabilies(&self->qos);
+	
+	/* The only value we must override it the baudrate */
+	self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
+		IR_115200|IR_576000|IR_1152000 |(IR_4000000 << 8);
+	
+	self->qos.min_turn_time.bits = qos_mtt_bits;
+	irda_qos_bits_to_value(&self->qos);
+	
+	/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
+	self->rx_buff.truesize = 14384; 
+	self->tx_buff.truesize = 14384;
+
+	/* Allocate memory if needed */
+	self->rx_buff.head =
+		dma_alloc_coherent(NULL, self->rx_buff.truesize,
+				   &self->rx_buff_dma, GFP_KERNEL);
+	if (self->rx_buff.head == NULL) {
+		err = -ENOMEM;
+		goto out2;
+
+	}
+	memset(self->rx_buff.head, 0, self->rx_buff.truesize);
+	
+	self->tx_buff.head =
+		dma_alloc_coherent(NULL, self->tx_buff.truesize,
+				   &self->tx_buff_dma, GFP_KERNEL);
+	if (self->tx_buff.head == NULL) {
+		err = -ENOMEM;
+		goto out3;
+	}
+	memset(self->tx_buff.head, 0, self->tx_buff.truesize);
+
+	self->rx_buff.in_frame = FALSE;
+	self->rx_buff.state = OUTSIDE_FRAME;
+	self->tx_buff.data = self->tx_buff.head;
+	self->rx_buff.data = self->rx_buff.head;
+	
+	/* Reset Tx queue info */
+	self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+	self->tx_fifo.tail = self->tx_buff.head;
+
+	/* Override the network functions we need to use */
+	SET_MODULE_OWNER(dev);
+	dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
+	dev->open            = nsc_ircc_net_open;
+	dev->stop            = nsc_ircc_net_close;
+	dev->do_ioctl        = nsc_ircc_net_ioctl;
+	dev->get_stats	     = nsc_ircc_net_get_stats;
+
+	err = register_netdev(dev);
+	if (err) {
+		IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
+		goto out4;
+	}
+	IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
+
+	/* Check if user has supplied a valid dongle id or not */
+	if ((dongle_id <= 0) ||
+	    (dongle_id >= (sizeof(dongle_types) / sizeof(dongle_types[0]))) ) {
+		dongle_id = nsc_ircc_read_dongle_id(self->io.fir_base);
+		
+		IRDA_MESSAGE("%s, Found dongle: %s\n", driver_name,
+			     dongle_types[dongle_id]);
+	} else {
+		IRDA_MESSAGE("%s, Using dongle: %s\n", driver_name,
+			     dongle_types[dongle_id]);
+	}
+	
+	self->io.dongle_id = dongle_id;
+	nsc_ircc_init_dongle_interface(self->io.fir_base, dongle_id);
+
+        pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, nsc_ircc_pmproc);
+        if (pmdev)
+                pmdev->data = self;
+
+	return 0;
+ out4:
+	dma_free_coherent(NULL, self->tx_buff.truesize,
+			  self->tx_buff.head, self->tx_buff_dma);
+ out3:
+	dma_free_coherent(NULL, self->rx_buff.truesize,
+			  self->rx_buff.head, self->rx_buff_dma);
+ out2:
+	release_region(self->io.fir_base, self->io.fir_ext);
+ out1:
+	free_netdev(dev);
+	dev_self[i] = NULL;
+	return err;
+}
+
+/*
+ * Function nsc_ircc_close (self)
+ *
+ *    Close driver instance
+ *
+ */
+static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
+{
+	int iobase;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+
+        iobase = self->io.fir_base;
+
+	/* Remove netdevice */
+	unregister_netdev(self->netdev);
+
+	/* Release the PORT that this driver is using */
+	IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", 
+		   __FUNCTION__, self->io.fir_base);
+	release_region(self->io.fir_base, self->io.fir_ext);
+
+	if (self->tx_buff.head)
+		dma_free_coherent(NULL, self->tx_buff.truesize,
+				  self->tx_buff.head, self->tx_buff_dma);
+	
+	if (self->rx_buff.head)
+		dma_free_coherent(NULL, self->rx_buff.truesize,
+				  self->rx_buff.head, self->rx_buff_dma);
+
+	dev_self[self->index] = NULL;
+	free_netdev(self->netdev);
+	
+	return 0;
+}
+
+/*
+ * Function nsc_ircc_init_108 (iobase, cfg_base, irq, dma)
+ *
+ *    Initialize the NSC '108 chip
+ *
+ */
+static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info)
+{
+	int cfg_base = info->cfg_base;
+	__u8 temp=0;
+
+	outb(2, cfg_base);      /* Mode Control Register (MCTL) */
+	outb(0x00, cfg_base+1); /* Disable device */
+	
+	/* Base Address and Interrupt Control Register (BAIC) */
+	outb(CFG_108_BAIC, cfg_base);
+	switch (info->fir_base) {
+	case 0x3e8: outb(0x14, cfg_base+1); break;
+	case 0x2e8: outb(0x15, cfg_base+1); break;
+	case 0x3f8: outb(0x16, cfg_base+1); break;
+	case 0x2f8: outb(0x17, cfg_base+1); break;
+	default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__);
+	}
+	
+	/* Control Signal Routing Register (CSRT) */
+	switch (info->irq) {
+	case 3:  temp = 0x01; break;
+	case 4:  temp = 0x02; break;
+	case 5:  temp = 0x03; break;
+	case 7:  temp = 0x04; break;
+	case 9:  temp = 0x05; break;
+	case 11: temp = 0x06; break;
+	case 15: temp = 0x07; break;
+	default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__);
+	}
+	outb(CFG_108_CSRT, cfg_base);
+	
+	switch (info->dma) {	
+	case 0: outb(0x08+temp, cfg_base+1); break;
+	case 1: outb(0x10+temp, cfg_base+1); break;
+	case 3: outb(0x18+temp, cfg_base+1); break;
+	default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__);
+	}
+	
+	outb(CFG_108_MCTL, cfg_base);      /* Mode Control Register (MCTL) */
+	outb(0x03, cfg_base+1); /* Enable device */
+
+	return 0;
+}
+
+/*
+ * Function nsc_ircc_probe_108 (chip, info)
+ *
+ *    
+ *
+ */
+static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info) 
+{
+	int cfg_base = info->cfg_base;
+	int reg;
+
+	/* Read address and interrupt control register (BAIC) */
+	outb(CFG_108_BAIC, cfg_base);
+	reg = inb(cfg_base+1);
+	
+	switch (reg & 0x03) {
+	case 0:
+		info->fir_base = 0x3e8;
+		break;
+	case 1:
+		info->fir_base = 0x2e8;
+		break;
+	case 2:
+		info->fir_base = 0x3f8;
+		break;
+	case 3:
+		info->fir_base = 0x2f8;
+		break;
+	}
+	info->sir_base = info->fir_base;
+	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__,
+		   info->fir_base);
+
+	/* Read control signals routing register (CSRT) */
+	outb(CFG_108_CSRT, cfg_base);
+	reg = inb(cfg_base+1);
+
+	switch (reg & 0x07) {
+	case 0:
+		info->irq = -1;
+		break;
+	case 1:
+		info->irq = 3;
+		break;
+	case 2:
+		info->irq = 4;
+		break;
+	case 3:
+		info->irq = 5;
+		break;
+	case 4:
+		info->irq = 7;
+		break;
+	case 5:
+		info->irq = 9;
+		break;
+	case 6:
+		info->irq = 11;
+		break;
+	case 7:
+		info->irq = 15;
+		break;
+	}
+	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
+
+	/* Currently we only read Rx DMA but it will also be used for Tx */
+	switch ((reg >> 3) & 0x03) {
+	case 0:
+		info->dma = -1;
+		break;
+	case 1:
+		info->dma = 0;
+		break;
+	case 2:
+		info->dma = 1;
+		break;
+	case 3:
+		info->dma = 3;
+		break;
+	}
+	IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
+
+	/* Read mode control register (MCTL) */
+	outb(CFG_108_MCTL, cfg_base);
+	reg = inb(cfg_base+1);
+
+	info->enabled = reg & 0x01;
+	info->suspended = !((reg >> 1) & 0x01);
+
+	return 0;
+}
+
+/*
+ * Function nsc_ircc_init_338 (chip, info)
+ *
+ *    Initialize the NSC '338 chip. Remember that the 87338 needs two 
+ *    consecutive writes to the data registers while CPU interrupts are
+ *    disabled. The 97338 does not require this, but shouldn't be any
+ *    harm if we do it anyway.
+ */
+static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info) 
+{
+	/* No init yet */
+	
+	return 0;
+}
+
+/*
+ * Function nsc_ircc_probe_338 (chip, info)
+ *
+ *    
+ *
+ */
+static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info) 
+{
+	int cfg_base = info->cfg_base;
+	int reg, com = 0;
+	int pnp;
+
+	/* Read funtion enable register (FER) */
+	outb(CFG_338_FER, cfg_base);
+	reg = inb(cfg_base+1);
+
+	info->enabled = (reg >> 2) & 0x01;
+
+	/* Check if we are in Legacy or PnP mode */
+	outb(CFG_338_PNP0, cfg_base);
+	reg = inb(cfg_base+1);
+	
+	pnp = (reg >> 3) & 0x01;
+	if (pnp) {
+		IRDA_DEBUG(2, "(), Chip is in PnP mode\n");
+		outb(0x46, cfg_base);
+		reg = (inb(cfg_base+1) & 0xfe) << 2;
+
+		outb(0x47, cfg_base);
+		reg |= ((inb(cfg_base+1) & 0xfc) << 8);
+
+		info->fir_base = reg;
+	} else {
+		/* Read function address register (FAR) */
+		outb(CFG_338_FAR, cfg_base);
+		reg = inb(cfg_base+1);
+		
+		switch ((reg >> 4) & 0x03) {
+		case 0:
+			info->fir_base = 0x3f8;
+			break;
+		case 1:
+			info->fir_base = 0x2f8;
+			break;
+		case 2:
+			com = 3;
+			break;
+		case 3:
+			com = 4;
+			break;
+		}
+		
+		if (com) {
+			switch ((reg >> 6) & 0x03) {
+			case 0:
+				if (com == 3)
+					info->fir_base = 0x3e8;
+				else
+					info->fir_base = 0x2e8;
+				break;
+			case 1:
+				if (com == 3)
+					info->fir_base = 0x338;
+				else
+					info->fir_base = 0x238;
+				break;
+			case 2:
+				if (com == 3)
+					info->fir_base = 0x2e8;
+				else
+					info->fir_base = 0x2e0;
+				break;
+			case 3:
+				if (com == 3)
+					info->fir_base = 0x220;
+				else
+					info->fir_base = 0x228;
+				break;
+			}
+		}
+	}
+	info->sir_base = info->fir_base;
+
+	/* Read PnP register 1 (PNP1) */
+	outb(CFG_338_PNP1, cfg_base);
+	reg = inb(cfg_base+1);
+	
+	info->irq = reg >> 4;
+	
+	/* Read PnP register 3 (PNP3) */
+	outb(CFG_338_PNP3, cfg_base);
+	reg = inb(cfg_base+1);
+
+	info->dma = (reg & 0x07) - 1;
+
+	/* Read power and test register (PTR) */
+	outb(CFG_338_PTR, cfg_base);
+	reg = inb(cfg_base+1);
+
+	info->suspended = reg & 0x01;
+
+	return 0;
+}
+
+
+/*
+ * Function nsc_ircc_init_39x (chip, info)
+ *
+ *    Now that we know it's a '39x (see probe below), we need to
+ *    configure it so we can use it.
+ *
+ * The NSC '338 chip is a Super I/O chip with a "bank" architecture,
+ * the configuration of the different functionality (serial, parallel,
+ * floppy...) are each in a different bank (Logical Device Number).
+ * The base address, irq and dma configuration registers are common
+ * to all functionalities (index 0x30 to 0x7F).
+ * There is only one configuration register specific to the
+ * serial port, CFG_39X_SPC.
+ * JeanII
+ *
+ * Note : this code was written by Jan Frey <janfrey@web.de>
+ */
+static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info) 
+{
+	int cfg_base = info->cfg_base;
+	int enabled;
+
+	/* User is shure about his config... accept it. */
+	IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
+		   "io=0x%04x, irq=%d, dma=%d\n", 
+		   __FUNCTION__, info->fir_base, info->irq, info->dma);
+
+	/* Access bank for SP2 */
+	outb(CFG_39X_LDN, cfg_base);
+	outb(0x02, cfg_base+1);
+
+	/* Configure SP2 */
+
+	/* We want to enable the device if not enabled */
+	outb(CFG_39X_ACT, cfg_base);
+	enabled = inb(cfg_base+1) & 0x01;
+	
+	if (!enabled) {
+		/* Enable the device */
+		outb(CFG_39X_SIOCF1, cfg_base);
+		outb(0x01, cfg_base+1);
+		/* May want to update info->enabled. Jean II */
+	}
+
+	/* Enable UART bank switching (bit 7) ; Sets the chip to normal
+	 * power mode (wake up from sleep mode) (bit 1) */
+	outb(CFG_39X_SPC, cfg_base);
+	outb(0x82, cfg_base+1);
+
+	return 0;
+}
+
+/*
+ * Function nsc_ircc_probe_39x (chip, info)
+ *
+ *    Test if we really have a '39x chip at the given address
+ *
+ * Note : this code was written by Jan Frey <janfrey@web.de>
+ */
+static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info) 
+{
+	int cfg_base = info->cfg_base;
+	int reg1, reg2, irq, irqt, dma1, dma2;
+	int enabled, susp;
+
+	IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
+		   __FUNCTION__, cfg_base);
+
+	/* This function should be executed with irq off to avoid
+	 * another driver messing with the Super I/O bank - Jean II */
+
+	/* Access bank for SP2 */
+	outb(CFG_39X_LDN, cfg_base);
+	outb(0x02, cfg_base+1);
+
+	/* Read infos about SP2 ; store in info struct */
+	outb(CFG_39X_BASEH, cfg_base);
+	reg1 = inb(cfg_base+1);
+	outb(CFG_39X_BASEL, cfg_base);
+	reg2 = inb(cfg_base+1);
+	info->fir_base = (reg1 << 8) | reg2;
+
+	outb(CFG_39X_IRQNUM, cfg_base);
+	irq = inb(cfg_base+1);
+	outb(CFG_39X_IRQSEL, cfg_base);
+	irqt = inb(cfg_base+1);
+	info->irq = irq;
+
+	outb(CFG_39X_DMA0, cfg_base);
+	dma1 = inb(cfg_base+1);
+	outb(CFG_39X_DMA1, cfg_base);
+	dma2 = inb(cfg_base+1);
+	info->dma = dma1 -1;
+
+	outb(CFG_39X_ACT, cfg_base);
+	info->enabled = enabled = inb(cfg_base+1) & 0x01;
+	
+	outb(CFG_39X_SPC, cfg_base);
+	susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
+
+	IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
+
+	/* Configure SP2 */
+
+	/* We want to enable the device if not enabled */
+	outb(CFG_39X_ACT, cfg_base);
+	enabled = inb(cfg_base+1) & 0x01;
+	
+	if (!enabled) {
+		/* Enable the device */
+		outb(CFG_39X_SIOCF1, cfg_base);
+		outb(0x01, cfg_base+1);
+		/* May want to update info->enabled. Jean II */
+	}
+
+	/* Enable UART bank switching (bit 7) ; Sets the chip to normal
+	 * power mode (wake up from sleep mode) (bit 1) */
+	outb(CFG_39X_SPC, cfg_base);
+	outb(0x82, cfg_base+1);
+
+	return 0;
+}
+
+/*
+ * Function nsc_ircc_setup (info)
+ *
+ *    Returns non-negative on success.
+ *
+ */
+static int nsc_ircc_setup(chipio_t *info)
+{
+	int version;
+	int iobase = info->fir_base;
+
+	/* Read the Module ID */
+	switch_bank(iobase, BANK3);
+	version = inb(iobase+MID);
+
+	IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
+		   __FUNCTION__, driver_name, version);
+
+	/* Should be 0x2? */
+	if (0x20 != (version & 0xf0)) {
+		IRDA_ERROR("%s, Wrong chip version %02x\n",
+			   driver_name, version);
+		return -1;
+	}
+
+	/* Switch to advanced mode */
+	switch_bank(iobase, BANK2);
+	outb(ECR1_EXT_SL, iobase+ECR1);
+	switch_bank(iobase, BANK0);
+	
+	/* Set FIFO threshold to TX17, RX16, reset and enable FIFO's */
+	switch_bank(iobase, BANK0);
+	outb(FCR_RXTH|FCR_TXTH|FCR_TXSR|FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
+
+	outb(0x03, iobase+LCR); 	/* 8 bit word length */
+	outb(MCR_SIR, iobase+MCR); 	/* Start at SIR-mode, also clears LSR*/
+
+	/* Set FIFO size to 32 */
+	switch_bank(iobase, BANK2);
+	outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
+
+	/* IRCR2: FEND_MD is not set */
+	switch_bank(iobase, BANK5);
+ 	outb(0x02, iobase+4);
+
+	/* Make sure that some defaults are OK */
+	switch_bank(iobase, BANK6);
+	outb(0x20, iobase+0); /* Set 32 bits FIR CRC */
+	outb(0x0a, iobase+1); /* Set MIR pulse width */
+	outb(0x0d, iobase+2); /* Set SIR pulse width to 1.6us */
+	outb(0x2a, iobase+4); /* Set beginning frag, and preamble length */
+
+	/* Enable receive interrupts */
+	switch_bank(iobase, BANK0);
+	outb(IER_RXHDL_IE, iobase+IER);
+
+	return 0;
+}
+
+/*
+ * Function nsc_ircc_read_dongle_id (void)
+ *
+ * Try to read dongle indentification. This procedure needs to be executed
+ * once after power-on/reset. It also needs to be used whenever you suspect
+ * that the user may have plugged/unplugged the IrDA Dongle.
+ */
+static int nsc_ircc_read_dongle_id (int iobase)
+{
+	int dongle_id;
+	__u8 bank;
+
+	bank = inb(iobase+BSR);
+
+	/* Select Bank 7 */
+	switch_bank(iobase, BANK7);
+	
+	/* IRCFG4: IRSL0_DS and IRSL21_DS are cleared */
+	outb(0x00, iobase+7);
+	
+	/* ID0, 1, and 2 are pulled up/down very slowly */
+	udelay(50);
+	
+	/* IRCFG1: read the ID bits */
+	dongle_id = inb(iobase+4) & 0x0f;
+
+#ifdef BROKEN_DONGLE_ID
+	if (dongle_id == 0x0a)
+		dongle_id = 0x09;
+#endif	
+	/* Go back to  bank 0 before returning */
+	switch_bank(iobase, BANK0);
+
+	outb(bank, iobase+BSR);
+
+	return dongle_id;
+}
+
+/*
+ * Function nsc_ircc_init_dongle_interface (iobase, dongle_id)
+ *
+ *     This function initializes the dongle for the transceiver that is
+ *     used. This procedure needs to be executed once after
+ *     power-on/reset. It also needs to be used whenever you suspect that
+ *     the dongle is changed. 
+ */
+static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id)
+{
+	int bank;
+
+	/* Save current bank */
+	bank = inb(iobase+BSR);
+
+	/* Select Bank 7 */
+	switch_bank(iobase, BANK7);
+	
+	/* IRCFG4: set according to dongle_id */
+	switch (dongle_id) {
+	case 0x00: /* same as */
+	case 0x01: /* Differential serial interface */
+		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x02: /* same as */
+	case 0x03: /* Reserved */
+		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x04: /* Sharp RY5HD01 */
+		break;
+	case 0x05: /* Reserved, but this is what the Thinkpad reports */
+		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x06: /* Single-ended serial interface */
+		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x07: /* Consumer-IR only */
+		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
+		IRDA_DEBUG(0, "%s(), %s\n",
+			   __FUNCTION__, dongle_types[dongle_id]);
+		break;
+	case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
+		outb(0x28, iobase+7); /* Set irsl[0-2] as output */
+		break;
+	case 0x0A: /* same as */
+	case 0x0B: /* Reserved */
+		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x0C: /* same as */
+	case 0x0D: /* HP HSDL-1100/HSDL-2100 */
+		/* 
+		 * Set irsl0 as input, irsl[1-2] as output, and separate 
+		 * inputs are used for SIR and MIR/FIR 
+		 */
+		outb(0x48, iobase+7); 
+		break;
+	case 0x0E: /* Supports SIR Mode only */
+		outb(0x28, iobase+7); /* Set irsl[0-2] as output */
+		break;
+	case 0x0F: /* No dongle connected */
+		IRDA_DEBUG(0, "%s(), %s\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+
+		switch_bank(iobase, BANK0);
+		outb(0x62, iobase+MCR);
+		break;
+	default: 
+		IRDA_DEBUG(0, "%s(), invalid dongle_id %#x", 
+			   __FUNCTION__, dongle_id);
+	}
+	
+	/* IRCFG1: IRSL1 and 2 are set to IrDA mode */
+	outb(0x00, iobase+4);
+
+	/* Restore bank register */
+	outb(bank, iobase+BSR);
+	
+} /* set_up_dongle_interface */
+
+/*
+ * Function nsc_ircc_change_dongle_speed (iobase, speed, dongle_id)
+ *
+ *    Change speed of the attach dongle
+ *
+ */
+static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id)
+{
+	__u8 bank;
+
+	/* Save current bank */
+	bank = inb(iobase+BSR);
+
+	/* Select Bank 7 */
+	switch_bank(iobase, BANK7);
+	
+	/* IRCFG1: set according to dongle_id */
+	switch (dongle_id) {
+	case 0x00: /* same as */
+	case 0x01: /* Differential serial interface */
+		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x02: /* same as */
+	case 0x03: /* Reserved */
+		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x04: /* Sharp RY5HD01 */
+		break;
+	case 0x05: /* Reserved */
+		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x06: /* Single-ended serial interface */
+		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x07: /* Consumer-IR only */
+		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
+		IRDA_DEBUG(0, "%s(), %s\n", 
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		outb(0x00, iobase+4);
+		if (speed > 115200)
+			outb(0x01, iobase+4);
+		break;
+	case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
+		outb(0x01, iobase+4);
+
+		if (speed == 4000000) {
+			/* There was a cli() there, but we now are already
+			 * under spin_lock_irqsave() - JeanII */
+			outb(0x81, iobase+4);
+			outb(0x80, iobase+4);
+		} else
+			outb(0x00, iobase+4);
+		break;
+	case 0x0A: /* same as */
+	case 0x0B: /* Reserved */
+		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
+			   __FUNCTION__, dongle_types[dongle_id]); 
+		break;
+	case 0x0C: /* same as */
+	case 0x0D: /* HP HSDL-1100/HSDL-2100 */
+		break;
+	case 0x0E: /* Supports SIR Mode only */
+		break;
+	case 0x0F: /* No dongle connected */
+		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
+			   __FUNCTION__, dongle_types[dongle_id]);
+
+		switch_bank(iobase, BANK0); 
+		outb(0x62, iobase+MCR);
+		break;
+	default: 
+		IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__);
+	}
+	/* Restore bank register */
+	outb(bank, iobase+BSR);
+}
+
+/*
+ * Function nsc_ircc_change_speed (self, baud)
+ *
+ *    Change the speed of the device
+ *
+ * This function *must* be called with irq off and spin-lock.
+ */
+static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed)
+{
+	struct net_device *dev = self->netdev;
+	__u8 mcr = MCR_SIR;
+	int iobase; 
+	__u8 bank;
+	__u8 ier;                  /* Interrupt enable register */
+
+	IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed);
+
+	IRDA_ASSERT(self != NULL, return 0;);
+
+	iobase = self->io.fir_base;
+
+	/* Update accounting for new speed */
+	self->io.speed = speed;
+
+	/* Save current bank */
+	bank = inb(iobase+BSR);
+
+	/* Disable interrupts */
+	switch_bank(iobase, BANK0);
+	outb(0, iobase+IER);
+
+	/* Select Bank 2 */
+	switch_bank(iobase, BANK2);
+
+	outb(0x00, iobase+BGDH);
+	switch (speed) {
+	case 9600:   outb(0x0c, iobase+BGDL); break;
+	case 19200:  outb(0x06, iobase+BGDL); break;
+	case 38400:  outb(0x03, iobase+BGDL); break;
+	case 57600:  outb(0x02, iobase+BGDL); break;
+	case 115200: outb(0x01, iobase+BGDL); break;
+	case 576000:
+		switch_bank(iobase, BANK5);
+		
+		/* IRCR2: MDRS is set */
+		outb(inb(iobase+4) | 0x04, iobase+4);
+	       
+		mcr = MCR_MIR;
+		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
+		break;
+	case 1152000:
+		mcr = MCR_MIR;
+		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__);
+		break;
+	case 4000000:
+		mcr = MCR_FIR;
+		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__);
+		break;
+	default:
+		mcr = MCR_FIR;
+		IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", 
+			   __FUNCTION__, speed);
+		break;
+	}
+
+	/* Set appropriate speed mode */
+	switch_bank(iobase, BANK0);
+	outb(mcr | MCR_TX_DFR, iobase+MCR);
+
+	/* Give some hits to the transceiver */
+	nsc_ircc_change_dongle_speed(iobase, speed, self->io.dongle_id);
+
+	/* Set FIFO threshold to TX17, RX16 */
+	switch_bank(iobase, BANK0);
+	outb(0x00, iobase+FCR);
+	outb(FCR_FIFO_EN, iobase+FCR);
+	outb(FCR_RXTH|     /* Set Rx FIFO threshold */
+	     FCR_TXTH|     /* Set Tx FIFO threshold */
+	     FCR_TXSR|     /* Reset Tx FIFO */
+	     FCR_RXSR|     /* Reset Rx FIFO */
+	     FCR_FIFO_EN,  /* Enable FIFOs */
+	     iobase+FCR);
+	
+	/* Set FIFO size to 32 */
+	switch_bank(iobase, BANK2);
+	outb(EXCR2_RFSIZ|EXCR2_TFSIZ, iobase+EXCR2);
+	
+	/* Enable some interrupts so we can receive frames */
+	switch_bank(iobase, BANK0); 
+	if (speed > 115200) {
+		/* Install FIR xmit handler */
+		dev->hard_start_xmit = nsc_ircc_hard_xmit_fir;
+		ier = IER_SFIF_IE;
+		nsc_ircc_dma_receive(self);
+	} else {
+		/* Install SIR xmit handler */
+		dev->hard_start_xmit = nsc_ircc_hard_xmit_sir;
+		ier = IER_RXHDL_IE;
+	}
+	/* Set our current interrupt mask */
+	outb(ier, iobase+IER);
+    	
+	/* Restore BSR */
+	outb(bank, iobase+BSR);
+
+	/* Make sure interrupt handlers keep the proper interrupt mask */
+	return(ier);
+}
+
+/*
+ * Function nsc_ircc_hard_xmit (skb, dev)
+ *
+ *    Transmit the frame!
+ *
+ */
+static int nsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
+{
+	struct nsc_ircc_cb *self;
+	unsigned long flags;
+	int iobase;
+	__s32 speed;
+	__u8 bank;
+	
+	self = (struct nsc_ircc_cb *) dev->priv;
+
+	IRDA_ASSERT(self != NULL, return 0;);
+
+	iobase = self->io.fir_base;
+
+	netif_stop_queue(dev);
+		
+	/* Make sure tests *& speed change are atomic */
+	spin_lock_irqsave(&self->lock, flags);
+	
+	/* Check if we need to change the speed */
+	speed = irda_get_next_speed(skb);
+	if ((speed != self->io.speed) && (speed != -1)) {
+		/* Check for empty frame. */
+		if (!skb->len) {
+			/* If we just sent a frame, we get called before
+			 * the last bytes get out (because of the SIR FIFO).
+			 * If this is the case, let interrupt handler change
+			 * the speed itself... Jean II */
+			if (self->io.direction == IO_RECV) {
+				nsc_ircc_change_speed(self, speed); 
+				/* TODO : For SIR->SIR, the next packet
+				 * may get corrupted - Jean II */
+				netif_wake_queue(dev);
+			} else {
+				self->new_speed = speed;
+				/* Queue will be restarted after speed change
+				 * to make sure packets gets through the
+				 * proper xmit handler - Jean II */
+			}
+			dev->trans_start = jiffies;
+			spin_unlock_irqrestore(&self->lock, flags);
+			dev_kfree_skb(skb);
+			return 0;
+		} else
+			self->new_speed = speed;
+	}
+
+	/* Save current bank */
+	bank = inb(iobase+BSR);
+	
+	self->tx_buff.data = self->tx_buff.head;
+	
+	self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, 
+					   self->tx_buff.truesize);
+
+	self->stats.tx_bytes += self->tx_buff.len;
+	
+	/* Add interrupt on tx low level (will fire immediately) */
+	switch_bank(iobase, BANK0);
+	outb(IER_TXLDL_IE, iobase+IER);
+	
+	/* Restore bank register */
+	outb(bank, iobase+BSR);
+
+	dev->trans_start = jiffies;
+	spin_unlock_irqrestore(&self->lock, flags);
+
+	dev_kfree_skb(skb);
+
+	return 0;
+}
+
+static int nsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
+{
+	struct nsc_ircc_cb *self;
+	unsigned long flags;
+	int iobase;
+	__s32 speed;
+	__u8 bank;
+	int mtt, diff;
+	
+	self = (struct nsc_ircc_cb *) dev->priv;
+	iobase = self->io.fir_base;
+
+	netif_stop_queue(dev);
+	
+	/* Make sure tests *& speed change are atomic */
+	spin_lock_irqsave(&self->lock, flags);
+
+	/* Check if we need to change the speed */
+	speed = irda_get_next_speed(skb);
+	if ((speed != self->io.speed) && (speed != -1)) {
+		/* Check for empty frame. */
+		if (!skb->len) {
+			/* If we are currently transmitting, defer to
+			 * interrupt handler. - Jean II */
+			if(self->tx_fifo.len == 0) {
+				nsc_ircc_change_speed(self, speed); 
+				netif_wake_queue(dev);
+			} else {
+				self->new_speed = speed;
+				/* Keep queue stopped :
+				 * the speed change operation may change the
+				 * xmit handler, and we want to make sure
+				 * the next packet get through the proper
+				 * Tx path, so block the Tx queue until
+				 * the speed change has been done.
+				 * Jean II */
+			}
+			dev->trans_start = jiffies;
+			spin_unlock_irqrestore(&self->lock, flags);
+			dev_kfree_skb(skb);
+			return 0;
+		} else {
+			/* Change speed after current frame */
+			self->new_speed = speed;
+		}
+	}
+
+	/* Save current bank */
+	bank = inb(iobase+BSR);
+
+	/* Register and copy this frame to DMA memory */
+	self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
+	self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
+	self->tx_fifo.tail += skb->len;
+
+	self->stats.tx_bytes += skb->len;
+
+	memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data, 
+	       skb->len);
+	
+	self->tx_fifo.len++;
+	self->tx_fifo.free++;
+
+	/* Start transmit only if there is currently no transmit going on */
+	if (self->tx_fifo.len == 1) {
+		/* Check if we must wait the min turn time or not */
+		mtt = irda_get_mtt(skb);
+		if (mtt) {
+			/* Check how much time we have used already */
+			do_gettimeofday(&self->now);
+			diff = self->now.tv_usec - self->stamp.tv_usec;
+			if (diff < 0) 
+				diff += 1000000;
+			
+			/* Check if the mtt is larger than the time we have
+			 * already used by all the protocol processing
+			 */
+			if (mtt > diff) {
+				mtt -= diff;
+
+				/* 
+				 * Use timer if delay larger than 125 us, and
+				 * use udelay for smaller values which should
+				 * be acceptable
+				 */
+				if (mtt > 125) {
+					/* Adjust for timer resolution */
+					mtt = mtt / 125;
+					
+					/* Setup timer */
+					switch_bank(iobase, BANK4);
+					outb(mtt & 0xff, iobase+TMRL);
+					outb((mtt >> 8) & 0x0f, iobase+TMRH);
+					
+					/* Start timer */
+					outb(IRCR1_TMR_EN, iobase+IRCR1);
+					self->io.direction = IO_XMIT;
+					
+					/* Enable timer interrupt */
+					switch_bank(iobase, BANK0);
+					outb(IER_TMR_IE, iobase+IER);
+					
+					/* Timer will take care of the rest */
+					goto out; 
+				} else
+					udelay(mtt);
+			}
+		}		
+		/* Enable DMA interrupt */
+		switch_bank(iobase, BANK0);
+		outb(IER_DMA_IE, iobase+IER);
+
+		/* Transmit frame */
+		nsc_ircc_dma_xmit(self, iobase);
+	}
+ out:
+	/* Not busy transmitting anymore if window is not full,
+	 * and if we don't need to change speed */
+	if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0))
+		netif_wake_queue(self->netdev);
+
+	/* Restore bank register */
+	outb(bank, iobase+BSR);
+
+	dev->trans_start = jiffies;
+	spin_unlock_irqrestore(&self->lock, flags);
+	dev_kfree_skb(skb);
+
+	return 0;
+}
+
+/*
+ * Function nsc_ircc_dma_xmit (self, iobase)
+ *
+ *    Transmit data using DMA
+ *
+ */
+static void nsc_ircc_dma_xmit(struct nsc_ircc_cb *self, int iobase)
+{
+	int bsr;
+
+	/* Save current bank */
+	bsr = inb(iobase+BSR);
+
+	/* Disable DMA */
+	switch_bank(iobase, BANK0);
+	outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
+	
+	self->io.direction = IO_XMIT;
+	
+	/* Choose transmit DMA channel  */ 
+	switch_bank(iobase, BANK2);
+	outb(ECR1_DMASWP|ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
+	
+	irda_setup_dma(self->io.dma, 
+		       ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
+			self->tx_buff.head) + self->tx_buff_dma,
+		       self->tx_fifo.queue[self->tx_fifo.ptr].len, 
+		       DMA_TX_MODE);
+
+	/* Enable DMA and SIR interaction pulse */
+ 	switch_bank(iobase, BANK0);	
+	outb(inb(iobase+MCR)|MCR_TX_DFR|MCR_DMA_EN|MCR_IR_PLS, iobase+MCR);
+
+	/* Restore bank register */
+	outb(bsr, iobase+BSR);
+}
+
+/*
+ * Function nsc_ircc_pio_xmit (self, iobase)
+ *
+ *    Transmit data using PIO. Returns the number of bytes that actually
+ *    got transferred
+ *
+ */
+static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
+{
+	int actual = 0;
+	__u8 bank;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	/* Save current bank */
+	bank = inb(iobase+BSR);
+
+	switch_bank(iobase, BANK0);
+	if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
+		IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
+			   __FUNCTION__);
+
+		/* FIFO may still be filled to the Tx interrupt threshold */
+		fifo_size -= 17;
+	}
+
+	/* Fill FIFO with current frame */
+	while ((fifo_size-- > 0) && (actual < len)) {
+		/* Transmit next byte */
+		outb(buf[actual++], iobase+TXD);
+	}
+        
+	IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
+		   __FUNCTION__, fifo_size, actual, len);
+	
+	/* Restore bank */
+	outb(bank, iobase+BSR);
+
+	return actual;
+}
+
+/*
+ * Function nsc_ircc_dma_xmit_complete (self)
+ *
+ *    The transfer of a frame in finished. This function will only be called 
+ *    by the interrupt handler
+ *
+ */
+static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self)
+{
+	int iobase;
+	__u8 bank;
+	int ret = TRUE;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	iobase = self->io.fir_base;
+
+	/* Save current bank */
+	bank = inb(iobase+BSR);
+
+	/* Disable DMA */
+	switch_bank(iobase, BANK0);
+        outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
+	
+	/* Check for underrrun! */
+	if (inb(iobase+ASCR) & ASCR_TXUR) {
+		self->stats.tx_errors++;
+		self->stats.tx_fifo_errors++;
+		
+		/* Clear bit, by writing 1 into it */
+		outb(ASCR_TXUR, iobase+ASCR);
+	} else {
+		self->stats.tx_packets++;
+	}
+
+	/* Finished with this frame, so prepare for next */
+	self->tx_fifo.ptr++;
+	self->tx_fifo.len--;
+
+	/* Any frames to be sent back-to-back? */
+	if (self->tx_fifo.len) {
+		nsc_ircc_dma_xmit(self, iobase);
+		
+		/* Not finished yet! */
+		ret = FALSE;
+	} else {
+		/* Reset Tx FIFO info */
+		self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+		self->tx_fifo.tail = self->tx_buff.head;
+	}
+
+	/* Make sure we have room for more frames and
+	 * that we don't need to change speed */
+	if ((self->tx_fifo.free < MAX_TX_WINDOW) && (self->new_speed == 0)) {
+		/* Not busy transmitting anymore */
+		/* Tell the network layer, that we can accept more frames */
+		netif_wake_queue(self->netdev);
+	}
+
+	/* Restore bank */
+	outb(bank, iobase+BSR);
+	
+	return ret;
+}
+
+/*
+ * Function nsc_ircc_dma_receive (self)
+ *
+ *    Get ready for receiving a frame. The device will initiate a DMA
+ *    if it starts to receive a frame.
+ *
+ */
+static int nsc_ircc_dma_receive(struct nsc_ircc_cb *self) 
+{
+	int iobase;
+	__u8 bsr;
+
+	iobase = self->io.fir_base;
+
+	/* Reset Tx FIFO info */
+	self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
+	self->tx_fifo.tail = self->tx_buff.head;
+
+	/* Save current bank */
+	bsr = inb(iobase+BSR);
+
+	/* Disable DMA */
+	switch_bank(iobase, BANK0);
+	outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
+
+	/* Choose DMA Rx, DMA Fairness, and Advanced mode */
+	switch_bank(iobase, BANK2);
+	outb(ECR1_DMANF|ECR1_EXT_SL, iobase+ECR1);
+
+	self->io.direction = IO_RECV;
+	self->rx_buff.data = self->rx_buff.head;
+	
+	/* Reset Rx FIFO. This will also flush the ST_FIFO */
+	switch_bank(iobase, BANK0);
+	outb(FCR_RXSR|FCR_FIFO_EN, iobase+FCR);
+
+	self->st_fifo.len = self->st_fifo.pending_bytes = 0;
+	self->st_fifo.tail = self->st_fifo.head = 0;
+	
+	irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
+		       DMA_RX_MODE);
+
+	/* Enable DMA */
+	switch_bank(iobase, BANK0);
+	outb(inb(iobase+MCR)|MCR_DMA_EN, iobase+MCR);
+
+	/* Restore bank register */
+	outb(bsr, iobase+BSR);
+	
+	return 0;
+}
+
+/*
+ * Function nsc_ircc_dma_receive_complete (self)
+ *
+ *    Finished with receiving frames
+ *
+ *    
+ */
+static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase)
+{
+	struct st_fifo *st_fifo;
+	struct sk_buff *skb;
+	__u8 status;
+	__u8 bank;
+	int len;
+
+	st_fifo = &self->st_fifo;
+
+	/* Save current bank */
+	bank = inb(iobase+BSR);
+	
+	/* Read all entries in status FIFO */
+	switch_bank(iobase, BANK5);
+	while ((status = inb(iobase+FRM_ST)) & FRM_ST_VLD) {
+		/* We must empty the status FIFO no matter what */
+		len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
+
+		if (st_fifo->tail >= MAX_RX_WINDOW) {
+			IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__);
+			continue;
+		}
+			
+		st_fifo->entries[st_fifo->tail].status = status;
+		st_fifo->entries[st_fifo->tail].len = len;
+		st_fifo->pending_bytes += len;
+		st_fifo->tail++;
+		st_fifo->len++;
+	}
+	/* Try to process all entries in status FIFO */
+	while (st_fifo->len > 0) {
+		/* Get first entry */
+		status = st_fifo->entries[st_fifo->head].status;
+		len    = st_fifo->entries[st_fifo->head].len;
+		st_fifo->pending_bytes -= len;
+		st_fifo->head++;
+		st_fifo->len--;
+
+		/* Check for errors */
+		if (status & FRM_ST_ERR_MSK) {
+			if (status & FRM_ST_LOST_FR) {
+				/* Add number of lost frames to stats */
+				self->stats.rx_errors += len;	
+			} else {
+				/* Skip frame */
+				self->stats.rx_errors++;
+				
+				self->rx_buff.data += len;
+			
+				if (status & FRM_ST_MAX_LEN)
+					self->stats.rx_length_errors++;
+				
+				if (status & FRM_ST_PHY_ERR) 
+					self->stats.rx_frame_errors++;
+				
+				if (status & FRM_ST_BAD_CRC) 
+					self->stats.rx_crc_errors++;
+			}
+			/* The errors below can be reported in both cases */
+			if (status & FRM_ST_OVR1)
+				self->stats.rx_fifo_errors++;		       
+			
+			if (status & FRM_ST_OVR2)
+				self->stats.rx_fifo_errors++;
+		} else {
+			/*  
+			 * First we must make sure that the frame we
+			 * want to deliver is all in main memory. If we
+			 * cannot tell, then we check if the Rx FIFO is
+			 * empty. If not then we will have to take a nap
+			 * and try again later.  
+			 */
+			if (st_fifo->pending_bytes < self->io.fifo_size) {
+				switch_bank(iobase, BANK0);
+				if (inb(iobase+LSR) & LSR_RXDA) {
+					/* Put this entry back in fifo */
+					st_fifo->head--;
+					st_fifo->len++;
+					st_fifo->pending_bytes += len;
+					st_fifo->entries[st_fifo->head].status = status;
+					st_fifo->entries[st_fifo->head].len = len;
+					/*  
+					 * DMA not finished yet, so try again 
+					 * later, set timer value, resolution 
+					 * 125 us 
+					 */
+					switch_bank(iobase, BANK4);
+					outb(0x02, iobase+TMRL); /* x 125 us */
+					outb(0x00, iobase+TMRH);
+
+					/* Start timer */
+					outb(IRCR1_TMR_EN, iobase+IRCR1);
+
+					/* Restore bank register */
+					outb(bank, iobase+BSR);
+					
+					return FALSE; /* I'll be back! */
+				}
+			}
+
+			/* 
+			 * Remember the time we received this frame, so we can
+			 * reduce the min turn time a bit since we will know
+			 * how much time we have used for protocol processing
+			 */
+			do_gettimeofday(&self->stamp);
+
+			skb = dev_alloc_skb(len+1);
+			if (skb == NULL)  {
+				IRDA_WARNING("%s(), memory squeeze, "
+					     "dropping frame.\n",
+					     __FUNCTION__);
+				self->stats.rx_dropped++;
+
+				/* Restore bank register */
+				outb(bank, iobase+BSR);
+
+				return FALSE;
+			}
+			
+			/* Make sure IP header gets aligned */
+			skb_reserve(skb, 1); 
+
+			/* Copy frame without CRC */
+			if (self->io.speed < 4000000) {
+				skb_put(skb, len-2);
+				memcpy(skb->data, self->rx_buff.data, len-2);
+			} else {
+				skb_put(skb, len-4);
+				memcpy(skb->data, self->rx_buff.data, len-4);
+			}
+
+			/* Move to next frame */
+			self->rx_buff.data += len;
+			self->stats.rx_bytes += len;
+			self->stats.rx_packets++;
+
+			skb->dev = self->netdev;
+			skb->mac.raw  = skb->data;
+			skb->protocol = htons(ETH_P_IRDA);
+			netif_rx(skb);
+			self->netdev->last_rx = jiffies;
+		}
+	}
+	/* Restore bank register */
+	outb(bank, iobase+BSR);
+
+	return TRUE;
+}
+
+/*
+ * Function nsc_ircc_pio_receive (self)
+ *
+ *    Receive all data in receiver FIFO
+ *
+ */
+static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self) 
+{
+	__u8 byte;
+	int iobase;
+
+	iobase = self->io.fir_base;
+	
+	/*  Receive all characters in Rx FIFO */
+	do {
+		byte = inb(iobase+RXD);
+		async_unwrap_char(self->netdev, &self->stats, &self->rx_buff, 
+				  byte);
+	} while (inb(iobase+LSR) & LSR_RXDA); /* Data available */	
+}
+
+/*
+ * Function nsc_ircc_sir_interrupt (self, eir)
+ *
+ *    Handle SIR interrupt
+ *
+ */
+static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir)
+{
+	int actual;
+
+	/* Check if transmit FIFO is low on data */
+	if (eir & EIR_TXLDL_EV) {
+		/* Write data left in transmit buffer */
+		actual = nsc_ircc_pio_write(self->io.fir_base, 
+					   self->tx_buff.data, 
+					   self->tx_buff.len, 
+					   self->io.fifo_size);
+		self->tx_buff.data += actual;
+		self->tx_buff.len  -= actual;
+		
+		self->io.direction = IO_XMIT;
+
+		/* Check if finished */
+		if (self->tx_buff.len > 0)
+			self->ier = IER_TXLDL_IE;
+		else { 
+
+			self->stats.tx_packets++;
+			netif_wake_queue(self->netdev);
+			self->ier = IER_TXEMP_IE;
+		}
+			
+	}
+	/* Check if transmission has completed */
+	if (eir & EIR_TXEMP_EV) {
+		/* Turn around and get ready to receive some data */
+		self->io.direction = IO_RECV;
+		self->ier = IER_RXHDL_IE;
+		/* Check if we need to change the speed?
+		 * Need to be after self->io.direction to avoid race with
+		 * nsc_ircc_hard_xmit_sir() - Jean II */
+		if (self->new_speed) {
+			IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__);
+			self->ier = nsc_ircc_change_speed(self,
+							  self->new_speed);
+			self->new_speed = 0;
+			netif_wake_queue(self->netdev);
+
+			/* Check if we are going to FIR */
+			if (self->io.speed > 115200) {
+				/* No need to do anymore SIR stuff */
+				return;
+			}
+		}
+	}
+
+	/* Rx FIFO threshold or timeout */
+	if (eir & EIR_RXHDL_EV) {
+		nsc_ircc_pio_receive(self);
+
+		/* Keep receiving */
+		self->ier = IER_RXHDL_IE;
+	}
+}
+
+/*
+ * Function nsc_ircc_fir_interrupt (self, eir)
+ *
+ *    Handle MIR/FIR interrupt
+ *
+ */
+static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase, 
+				   int eir)
+{
+	__u8 bank;
+
+	bank = inb(iobase+BSR);
+	
+	/* Status FIFO event*/
+	if (eir & EIR_SFIF_EV) {
+		/* Check if DMA has finished */
+		if (nsc_ircc_dma_receive_complete(self, iobase)) {
+			/* Wait for next status FIFO interrupt */
+			self->ier = IER_SFIF_IE;
+		} else {
+			self->ier = IER_SFIF_IE | IER_TMR_IE;
+		}
+	} else if (eir & EIR_TMR_EV) { /* Timer finished */
+		/* Disable timer */
+		switch_bank(iobase, BANK4);
+		outb(0, iobase+IRCR1);
+
+		/* Clear timer event */
+		switch_bank(iobase, BANK0);
+		outb(ASCR_CTE, iobase+ASCR);
+
+		/* Check if this is a Tx timer interrupt */
+		if (self->io.direction == IO_XMIT) {
+			nsc_ircc_dma_xmit(self, iobase);
+
+			/* Interrupt on DMA */
+			self->ier = IER_DMA_IE;
+		} else {
+			/* Check (again) if DMA has finished */
+			if (nsc_ircc_dma_receive_complete(self, iobase)) {
+				self->ier = IER_SFIF_IE;
+			} else {
+				self->ier = IER_SFIF_IE | IER_TMR_IE;
+			}
+		}
+	} else if (eir & EIR_DMA_EV) {
+		/* Finished with all transmissions? */
+		if (nsc_ircc_dma_xmit_complete(self)) {
+			if(self->new_speed != 0) {
+				/* As we stop the Tx queue, the speed change
+				 * need to be done when the Tx fifo is
+				 * empty. Ask for a Tx done interrupt */
+				self->ier = IER_TXEMP_IE;
+			} else {
+				/* Check if there are more frames to be
+				 * transmitted */
+				if (irda_device_txqueue_empty(self->netdev)) {
+					/* Prepare for receive */
+					nsc_ircc_dma_receive(self);
+					self->ier = IER_SFIF_IE;
+				} else
+					IRDA_WARNING("%s(), potential "
+						     "Tx queue lockup !\n",
+						     __FUNCTION__);
+			}
+		} else {
+			/*  Not finished yet, so interrupt on DMA again */
+			self->ier = IER_DMA_IE;
+		}
+	} else if (eir & EIR_TXEMP_EV) {
+		/* The Tx FIFO has totally drained out, so now we can change
+		 * the speed... - Jean II */
+		self->ier = nsc_ircc_change_speed(self, self->new_speed);
+		self->new_speed = 0;
+		netif_wake_queue(self->netdev);
+		/* Note : nsc_ircc_change_speed() restarted Rx fifo */
+	}
+
+	outb(bank, iobase+BSR);
+}
+
+/*
+ * Function nsc_ircc_interrupt (irq, dev_id, regs)
+ *
+ *    An interrupt from the chip has arrived. Time to do some work
+ *
+ */
+static irqreturn_t nsc_ircc_interrupt(int irq, void *dev_id,
+				struct pt_regs *regs)
+{
+	struct net_device *dev = (struct net_device *) dev_id;
+	struct nsc_ircc_cb *self;
+	__u8 bsr, eir;
+	int iobase;
+
+	if (!dev) {
+		IRDA_WARNING("%s: irq %d for unknown device.\n",
+			     driver_name, irq);
+		return IRQ_NONE;
+	}
+	self = (struct nsc_ircc_cb *) dev->priv;
+
+	spin_lock(&self->lock);	
+
+	iobase = self->io.fir_base;
+
+	bsr = inb(iobase+BSR); 	/* Save current bank */
+
+	switch_bank(iobase, BANK0);	
+	self->ier = inb(iobase+IER); 
+	eir = inb(iobase+EIR) & self->ier; /* Mask out the interesting ones */ 
+
+	outb(0, iobase+IER); /* Disable interrupts */
+	
+	if (eir) {
+		/* Dispatch interrupt handler for the current speed */
+		if (self->io.speed > 115200)
+			nsc_ircc_fir_interrupt(self, iobase, eir);
+		else
+			nsc_ircc_sir_interrupt(self, eir);
+	}
+	
+	outb(self->ier, iobase+IER); /* Restore interrupts */
+	outb(bsr, iobase+BSR);       /* Restore bank register */
+
+	spin_unlock(&self->lock);
+	return IRQ_RETVAL(eir);
+}
+
+/*
+ * Function nsc_ircc_is_receiving (self)
+ *
+ *    Return TRUE is we are currently receiving a frame
+ *
+ */
+static int nsc_ircc_is_receiving(struct nsc_ircc_cb *self)
+{
+	unsigned long flags;
+	int status = FALSE;
+	int iobase;
+	__u8 bank;
+
+	IRDA_ASSERT(self != NULL, return FALSE;);
+
+	spin_lock_irqsave(&self->lock, flags);
+
+	if (self->io.speed > 115200) {
+		iobase = self->io.fir_base;
+
+		/* Check if rx FIFO is not empty */
+		bank = inb(iobase+BSR);
+		switch_bank(iobase, BANK2);
+		if ((inb(iobase+RXFLV) & 0x3f) != 0) {
+			/* We are receiving something */
+			status =  TRUE;
+		}
+		outb(bank, iobase+BSR);
+	} else 
+		status = (self->rx_buff.state != OUTSIDE_FRAME);
+	
+	spin_unlock_irqrestore(&self->lock, flags);
+
+	return status;
+}
+
+/*
+ * Function nsc_ircc_net_open (dev)
+ *
+ *    Start the device
+ *
+ */
+static int nsc_ircc_net_open(struct net_device *dev)
+{
+	struct nsc_ircc_cb *self;
+	int iobase;
+	char hwname[32];
+	__u8 bank;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	
+	IRDA_ASSERT(dev != NULL, return -1;);
+	self = (struct nsc_ircc_cb *) dev->priv;
+	
+	IRDA_ASSERT(self != NULL, return 0;);
+	
+	iobase = self->io.fir_base;
+	
+	if (request_irq(self->io.irq, nsc_ircc_interrupt, 0, dev->name, dev)) {
+		IRDA_WARNING("%s, unable to allocate irq=%d\n",
+			     driver_name, self->io.irq);
+		return -EAGAIN;
+	}
+	/*
+	 * Always allocate the DMA channel after the IRQ, and clean up on 
+	 * failure.
+	 */
+	if (request_dma(self->io.dma, dev->name)) {
+		IRDA_WARNING("%s, unable to allocate dma=%d\n",
+			     driver_name, self->io.dma);
+		free_irq(self->io.irq, dev);
+		return -EAGAIN;
+	}
+	
+	/* Save current bank */
+	bank = inb(iobase+BSR);
+	
+	/* turn on interrupts */
+	switch_bank(iobase, BANK0);
+	outb(IER_LS_IE | IER_RXHDL_IE, iobase+IER);
+
+	/* Restore bank register */
+	outb(bank, iobase+BSR);
+
+	/* Ready to play! */
+	netif_start_queue(dev);
+	
+	/* Give self a hardware name */
+	sprintf(hwname, "NSC-FIR @ 0x%03x", self->io.fir_base);
+
+	/* 
+	 * Open new IrLAP layer instance, now that everything should be
+	 * initialized properly 
+	 */
+	self->irlap = irlap_open(dev, &self->qos, hwname);
+
+	return 0;
+}
+
+/*
+ * Function nsc_ircc_net_close (dev)
+ *
+ *    Stop the device
+ *
+ */
+static int nsc_ircc_net_close(struct net_device *dev)
+{
+	struct nsc_ircc_cb *self;
+	int iobase;
+	__u8 bank;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	
+	IRDA_ASSERT(dev != NULL, return -1;);
+
+	self = (struct nsc_ircc_cb *) dev->priv;
+	IRDA_ASSERT(self != NULL, return 0;);
+
+	/* Stop device */
+	netif_stop_queue(dev);
+	
+	/* Stop and remove instance of IrLAP */
+	if (self->irlap)
+		irlap_close(self->irlap);
+	self->irlap = NULL;
+	
+	iobase = self->io.fir_base;
+
+	disable_dma(self->io.dma);
+
+	/* Save current bank */
+	bank = inb(iobase+BSR);
+
+	/* Disable interrupts */
+	switch_bank(iobase, BANK0);
+	outb(0, iobase+IER); 
+       
+	free_irq(self->io.irq, dev);
+	free_dma(self->io.dma);
+
+	/* Restore bank register */
+	outb(bank, iobase+BSR);
+
+	return 0;
+}
+
+/*
+ * Function nsc_ircc_net_ioctl (dev, rq, cmd)
+ *
+ *    Process IOCTL commands for this device
+ *
+ */
+static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct if_irda_req *irq = (struct if_irda_req *) rq;
+	struct nsc_ircc_cb *self;
+	unsigned long flags;
+	int ret = 0;
+
+	IRDA_ASSERT(dev != NULL, return -1;);
+
+	self = dev->priv;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+	
+	switch (cmd) {
+	case SIOCSBANDWIDTH: /* Set bandwidth */
+		if (!capable(CAP_NET_ADMIN)) {
+			ret = -EPERM;
+			break;
+		}
+		spin_lock_irqsave(&self->lock, flags);
+		nsc_ircc_change_speed(self, irq->ifr_baudrate);
+		spin_unlock_irqrestore(&self->lock, flags);
+		break;
+	case SIOCSMEDIABUSY: /* Set media busy */
+		if (!capable(CAP_NET_ADMIN)) {
+			ret = -EPERM;
+			break;
+		}
+		irda_device_set_media_busy(self->netdev, TRUE);
+		break;
+	case SIOCGRECEIVING: /* Check if we are receiving right now */
+		/* This is already protected */
+		irq->ifr_receiving = nsc_ircc_is_receiving(self);
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+	}
+	return ret;
+}
+
+static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev)
+{
+	struct nsc_ircc_cb *self = (struct nsc_ircc_cb *) dev->priv;
+	
+	return &self->stats;
+}
+
+static void nsc_ircc_suspend(struct nsc_ircc_cb *self)
+{
+	IRDA_MESSAGE("%s, Suspending\n", driver_name);
+
+	if (self->io.suspended)
+		return;
+
+	nsc_ircc_net_close(self->netdev);
+
+	self->io.suspended = 1;
+}
+
+static void nsc_ircc_wakeup(struct nsc_ircc_cb *self)
+{
+	if (!self->io.suspended)
+		return;
+
+	nsc_ircc_setup(&self->io);
+	nsc_ircc_net_open(self->netdev);
+	
+	IRDA_MESSAGE("%s, Waking up\n", driver_name);
+
+	self->io.suspended = 0;
+}
+
+static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data)
+{
+        struct nsc_ircc_cb *self = (struct nsc_ircc_cb*) dev->data;
+        if (self) {
+                switch (rqst) {
+                case PM_SUSPEND:
+                        nsc_ircc_suspend(self);
+                        break;
+                case PM_RESUME:
+                        nsc_ircc_wakeup(self);
+                        break;
+                }
+        }
+	return 0;
+}
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("NSC IrDA Device Driver");
+MODULE_LICENSE("GPL");
+
+
+module_param(qos_mtt_bits, int, 0);
+MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io, "Base I/O addresses");
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(irq, "IRQ lines");
+module_param_array(dma, int, NULL, 0);
+MODULE_PARM_DESC(dma, "DMA channels");
+module_param(dongle_id, int, 0);
+MODULE_PARM_DESC(dongle_id, "Type-id of used dongle");
+
+module_init(nsc_ircc_init);
+module_exit(nsc_ircc_cleanup);
+