Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (235 commits)
  [NETFILTER]: Add H.323 conntrack/NAT helper
  [TG3]: Don't mark tg3_test_registers() as returning const.
  [IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2
  [IPV6]: Nearly complete kzalloc cleanup for net/ipv6
  [IPV6]: Cleanup of net/ipv6/reassambly.c
  [BRIDGE]: Remove duplicate const from is_link_local() argument type.
  [DECNET]: net/decnet/dn_route.c: fix inconsequent NULL checking
  [TG3]: make drivers/net/tg3.c:tg3_request_irq() static
  [BRIDGE]: use LLC to send STP
  [LLC]: llc_mac_hdr_init const arguments
  [BRIDGE]: allow show/store of group multicast address
  [BRIDGE]: use llc for receiving STP packets
  [BRIDGE]: stp timer to jiffies cleanup
  [BRIDGE]: forwarding remove unneeded preempt and bh diasables
  [BRIDGE]: netfilter inline cleanup
  [BRIDGE]: netfilter VLAN macro cleanup
  [BRIDGE]: netfilter dont use __constant_htons
  [BRIDGE]: netfilter whitespace
  [BRIDGE]: optimize frame pass up
  [BRIDGE]: use kzalloc
  ...

10 files changed, 665 insertions, 94 deletions

diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index c81fe1c382d..5e6d0075299 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -64,6 +64,14 @@ config TEKRAM_DONGLE
 	  dongles you will have to start irattach like this:
 	  "irattach -d tekram".
 
+config TOIM3232_DONGLE
+	tristate "TOIM3232 IrDa dongle"
+	depends on DONGLE && IRDA
+	help
+	  Say Y here if you want to build support for the Vishay/Temic
+	  TOIM3232 and TOIM4232 based dongles.
+	  To compile it as a module, choose M here.
+
 config LITELINK_DONGLE
 	tristate "Parallax LiteLink dongle"
 	depends on DONGLE && IRDA
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 72cbfdc9cfc..27ab75f2079 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_OLD_BELKIN_DONGLE)	+= old_belkin-sir.o
 obj-$(CONFIG_MCP2120_DONGLE)	+= mcp2120-sir.o
 obj-$(CONFIG_ACT200L_DONGLE)	+= act200l-sir.o
 obj-$(CONFIG_MA600_DONGLE)	+= ma600-sir.o
+obj-$(CONFIG_TOIM3232_DONGLE)	+= toim3232-sir.o
 
 # The SIR helper module
 sir-dev-objs := sir_dev.o sir_dongle.o sir_kthread.o
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 3137592d60c..910c0cab35b 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -1778,7 +1778,7 @@ static struct pci_driver donauboe_pci_driver = {
 static int __init
 donauboe_init (void)
 {
-  return pci_module_init(&donauboe_pci_driver);
+  return pci_register_driver(&donauboe_pci_driver);
 }
 
 static void __exit
diff --git a/drivers/net/irda/ep7211_ir.c b/drivers/net/irda/ep7211_ir.c
index 31896262d21..4cba38f7e4a 100644
--- a/drivers/net/irda/ep7211_ir.c
+++ b/drivers/net/irda/ep7211_ir.c
@@ -8,6 +8,7 @@
 #include <linux/delay.h>
 #include <linux/tty.h>
 #include <linux/init.h>
+#include <linux/spinlock.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/irda_device.h>
@@ -23,6 +24,8 @@ static void ep7211_ir_close(dongle_t *self);
 static int  ep7211_ir_change_speed(struct irda_task *task);
 static int  ep7211_ir_reset(struct irda_task *task);
 
+static DEFINE_SPINLOCK(ep7211_lock);
+
 static struct dongle_reg dongle = {
 	.type = IRDA_EP7211_IR,
 	.open = ep7211_ir_open,
@@ -36,7 +39,7 @@ static void ep7211_ir_open(dongle_t *self, struct qos_info *qos)
 {
 	unsigned int syscon1, flags;
 
-	save_flags(flags); cli();
+	spin_lock_irqsave(&ep7211_lock, flags);
 
 	/* Turn on the SIR encoder. */
 	syscon1 = clps_readl(SYSCON1);
@@ -46,14 +49,14 @@ static void ep7211_ir_open(dongle_t *self, struct qos_info *qos)
 	/* XXX: We should disable modem status interrupts on the first
 		UART (interrupt #14). */
 
-	restore_flags(flags);
+	spin_unlock_irqrestore(&ep7211_lock, flags);
 }
 
 static void ep7211_ir_close(dongle_t *self)
 {
 	unsigned int syscon1, flags;
 
-	save_flags(flags); cli();
+	spin_lock_irqsave(&ep7211_lock, flags);
 
 	/* Turn off the SIR encoder. */
 	syscon1 = clps_readl(SYSCON1);
@@ -63,7 +66,7 @@ static void ep7211_ir_close(dongle_t *self)
 	/* XXX: If we've disabled the modem status interrupts, we should
 		reset them back to their original state. */
 
-	restore_flags(flags);
+	spin_unlock_irqrestore(&ep7211_lock, flags);
 }
 
 /*
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index 101750bf210..6a98b7ae497 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -33,6 +33,7 @@
 #include <asm/uaccess.h>
 #include <linux/smp_lock.h>
 #include <linux/delay.h>
+#include <linux/mutex.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/irda_device.h>
@@ -338,7 +339,7 @@ static inline void irtty_stop_receiver(struct tty_struct *tty, int stop)
 /*****************************************************************/
 
 /* serialize ldisc open/close with sir_dev */
-static DECLARE_MUTEX(irtty_sem);
+static DEFINE_MUTEX(irtty_mutex);
 
 /* notifier from sir_dev when irda% device gets opened (ifup) */
 
@@ -348,11 +349,11 @@ static int irtty_start_dev(struct sir_dev *dev)
 	struct tty_struct *tty;
 
 	/* serialize with ldisc open/close */
-	down(&irtty_sem);
+	mutex_lock(&irtty_mutex);
 
 	priv = dev->priv;
 	if (unlikely(!priv || priv->magic!=IRTTY_MAGIC)) {
-		up(&irtty_sem);
+		mutex_unlock(&irtty_mutex);
 		return -ESTALE;
 	}
 
@@ -363,7 +364,7 @@ static int irtty_start_dev(struct sir_dev *dev)
 	/* Make sure we can receive more data */
 	irtty_stop_receiver(tty, FALSE);
 
-	up(&irtty_sem);
+	mutex_unlock(&irtty_mutex);
 	return 0;
 }
 
@@ -375,11 +376,11 @@ static int irtty_stop_dev(struct sir_dev *dev)
 	struct tty_struct *tty;
 
 	/* serialize with ldisc open/close */
-	down(&irtty_sem);
+	mutex_lock(&irtty_mutex);
 
 	priv = dev->priv;
 	if (unlikely(!priv || priv->magic!=IRTTY_MAGIC)) {
-		up(&irtty_sem);
+		mutex_unlock(&irtty_mutex);
 		return -ESTALE;
 	}
 
@@ -390,7 +391,7 @@ static int irtty_stop_dev(struct sir_dev *dev)
 	if (tty->driver->stop)
 		tty->driver->stop(tty);
 
-	up(&irtty_sem);
+	mutex_unlock(&irtty_mutex);
 
 	return 0;
 }
@@ -514,13 +515,13 @@ static int irtty_open(struct tty_struct *tty)
 	priv->dev = dev;
 
 	/* serialize with start_dev - in case we were racing with ifup */
-	down(&irtty_sem);
+	mutex_lock(&irtty_mutex);
 
 	dev->priv = priv;
 	tty->disc_data = priv;
 	tty->receive_room = 65536;
 
-	up(&irtty_sem);
+	mutex_unlock(&irtty_mutex);
 
 	IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __FUNCTION__, tty->name);
 
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index ee717d0e939..83141a3ff54 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -12,6 +12,7 @@
  *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
  *     Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
  *     Copyright (c) 1998 Actisys Corp., www.actisys.com
+ *     Copyright (c) 2000-2004 Jean Tourrilhes <jt@hpl.hp.com>
  *     All Rights Reserved
  *      
  *     This program is free software; you can redistribute it and/or 
@@ -53,14 +54,13 @@
 #include <linux/init.h>
 #include <linux/rtnetlink.h>
 #include <linux/dma-mapping.h>
+#include <linux/pnp.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
 
-#include <linux/pm.h>
-#include <linux/pm_legacy.h>
-
 #include <net/irda/wrapper.h>
 #include <net/irda/irda.h>
 #include <net/irda/irda_device.h>
@@ -72,14 +72,27 @@
 
 static char *driver_name = "nsc-ircc";
 
+/* Power Management */
+#define NSC_IRCC_DRIVER_NAME                  "nsc-ircc"
+static int nsc_ircc_suspend(struct platform_device *dev, pm_message_t state);
+static int nsc_ircc_resume(struct platform_device *dev);
+
+static struct platform_driver nsc_ircc_driver = {
+	.suspend	= nsc_ircc_suspend,
+	.resume		= nsc_ircc_resume,
+	.driver		= {
+		.name	= NSC_IRCC_DRIVER_NAME,
+	},
+};
+
 /* Module parameters */
 static int qos_mtt_bits = 0x07;  /* 1 ms or more */
 static int dongle_id;
 
 /* Use BIOS settions by default, but user may supply module parameters */
-static unsigned int io[]  = { ~0, ~0, ~0, ~0 };
-static unsigned int irq[] = { 0, 0, 0, 0, 0 };
-static unsigned int dma[] = { 0, 0, 0, 0, 0 };
+static unsigned int io[]  = { ~0, ~0, ~0, ~0, ~0 };
+static unsigned int irq[] = {  0,  0,  0,  0,  0 };
+static unsigned int dma[] = {  0,  0,  0,  0,  0 };
 
 static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info);
 static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info);
@@ -87,6 +100,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info);
 static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info);
 static int nsc_ircc_init_338(nsc_chip_t *chip, chipio_t *info);
 static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info);
+static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id);
 
 /* These are the known NSC chips */
 static nsc_chip_t chips[] = {
@@ -101,11 +115,12 @@ static nsc_chip_t chips[] = {
 	/* Contributed by Jan Frey - IBM A30/A31 */
 	{ "PC8739x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xea, 0xff, 
 	  nsc_ircc_probe_39x, nsc_ircc_init_39x },
+	{ "IBM", { 0x2e, 0x4e, 0x0 }, 0x20, 0xf4, 0xff,
+ 	  nsc_ircc_probe_39x, nsc_ircc_init_39x },
 	{ NULL }
 };
 
-/* Max 4 instances for now */
-static struct nsc_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
+static struct nsc_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL, NULL };
 
 static char *dongle_types[] = {
 	"Differential serial interface",
@@ -126,8 +141,24 @@ static char *dongle_types[] = {
 	"No dongle connected",
 };
 
+/* PNP probing */
+static chipio_t pnp_info;
+static const struct pnp_device_id nsc_ircc_pnp_table[] = {
+	{ .id = "NSC6001", .driver_data = 0 },
+	{ .id = "IBM0071", .driver_data = 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pnp, nsc_ircc_pnp_table);
+
+static struct pnp_driver nsc_ircc_pnp_driver = {
+	.name = "nsc-ircc",
+	.id_table = nsc_ircc_pnp_table,
+	.probe = nsc_ircc_pnp_probe,
+};
+
 /* Some prototypes */
-static int  nsc_ircc_open(int i, chipio_t *info);
+static int  nsc_ircc_open(chipio_t *info);
 static int  nsc_ircc_close(struct nsc_ircc_cb *self);
 static int  nsc_ircc_setup(chipio_t *info);
 static void nsc_ircc_pio_receive(struct nsc_ircc_cb *self);
@@ -146,7 +177,10 @@ static int  nsc_ircc_net_open(struct net_device *dev);
 static int  nsc_ircc_net_close(struct net_device *dev);
 static int  nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev);
-static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data);
+
+/* Globals */
+static int pnp_registered;
+static int pnp_succeeded;
 
 /*
  * Function nsc_ircc_init ()
@@ -158,28 +192,36 @@ static int __init nsc_ircc_init(void)
 {
 	chipio_t info;
 	nsc_chip_t *chip;
-	int ret = -ENODEV;
+	int ret;
 	int cfg_base;
 	int cfg, id;
 	int reg;
 	int i = 0;
 
+	ret = platform_driver_register(&nsc_ircc_driver);
+        if (ret) {
+                IRDA_ERROR("%s, Can't register driver!\n", driver_name);
+                return ret;
+        }
+
+ 	/* Register with PnP subsystem to detect disable ports */
+	ret = pnp_register_driver(&nsc_ircc_pnp_driver);
+
+ 	if (ret >= 0)
+ 		pnp_registered = 1;
+
+	ret = -ENODEV;
+
 	/* Probe for all the NSC chipsets we know about */
-	for (chip=chips; chip->name ; chip++) {
+	for (chip = chips; chip->name ; chip++) {
 		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__,
 			   chip->name);
 		
 		/* Try all config registers for this chip */
-		for (cfg=0; cfg<3; cfg++) {
+		for (cfg = 0; cfg < ARRAY_SIZE(chip->cfg); cfg++) {
 			cfg_base = chip->cfg[cfg];
 			if (!cfg_base)
 				continue;
-			
-			memset(&info, 0, sizeof(chipio_t));
-			info.cfg_base = cfg_base;
-			info.fir_base = io[i];
-			info.dma = dma[i];
-			info.irq = irq[i];
 
 			/* Read index register */
 			reg = inb(cfg_base);
@@ -194,24 +236,65 @@ static int __init nsc_ircc_init(void)
 			if ((id & chip->cid_mask) == chip->cid_value) {
 				IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
 					   __FUNCTION__, chip->name, id & ~chip->cid_mask);
-				/* 
-				 * If the user supplies the base address, then
-				 * we init the chip, if not we probe the values
-				 * set by the BIOS
-				 */				
-				if (io[i] < 0x2000) {
-					chip->init(chip, &info);
-				} else
-					chip->probe(chip, &info);
 
-				if (nsc_ircc_open(i, &info) == 0)
-					ret = 0;
+				/*
+				 * If we found a correct PnP setting,
+				 * we first try it.
+				 */
+				if (pnp_succeeded) {
+					memset(&info, 0, sizeof(chipio_t));
+					info.cfg_base = cfg_base;
+					info.fir_base = pnp_info.fir_base;
+					info.dma = pnp_info.dma;
+					info.irq = pnp_info.irq;
+
+					if (info.fir_base < 0x2000) {
+						IRDA_MESSAGE("%s, chip->init\n", driver_name);
+						chip->init(chip, &info);
+					} else
+						chip->probe(chip, &info);
+
+					if (nsc_ircc_open(&info) >= 0)
+						ret = 0;
+				}
+
+				/*
+				 * Opening based on PnP values failed.
+				 * Let's fallback to user values, or probe
+				 * the chip.
+				 */
+				if (ret) {
+					IRDA_DEBUG(2, "%s, PnP init failed\n", driver_name);
+					memset(&info, 0, sizeof(chipio_t));
+					info.cfg_base = cfg_base;
+					info.fir_base = io[i];
+					info.dma = dma[i];
+					info.irq = irq[i];
+
+					/*
+					 * If the user supplies the base address, then
+					 * we init the chip, if not we probe the values
+					 * set by the BIOS
+					 */
+					if (io[i] < 0x2000) {
+						chip->init(chip, &info);
+					} else
+						chip->probe(chip, &info);
+
+					if (nsc_ircc_open(&info) >= 0)
+						ret = 0;
+				}
 				i++;
 			} else {
 				IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id);
 			}
 		} 
-		
+	}
+
+	if (ret) {
+		platform_driver_unregister(&nsc_ircc_driver);
+		pnp_unregister_driver(&nsc_ircc_pnp_driver);
+		pnp_registered = 0;
 	}
 
 	return ret;
@@ -227,12 +310,17 @@ static void __exit nsc_ircc_cleanup(void)
 {
 	int i;
 
-	pm_unregister_all(nsc_ircc_pmproc);
-
-	for (i=0; i < 4; i++) {
+	for (i = 0; i < ARRAY_SIZE(dev_self); i++) {
 		if (dev_self[i])
 			nsc_ircc_close(dev_self[i]);
 	}
+
+	platform_driver_unregister(&nsc_ircc_driver);
+
+	if (pnp_registered)
+ 		pnp_unregister_driver(&nsc_ircc_pnp_driver);
+
+	pnp_registered = 0;
 }
 
 /*
@@ -241,16 +329,26 @@ static void __exit nsc_ircc_cleanup(void)
  *    Open driver instance
  *
  */
-static int __init nsc_ircc_open(int i, chipio_t *info)
+static int __init nsc_ircc_open(chipio_t *info)
 {
 	struct net_device *dev;
 	struct nsc_ircc_cb *self;
-        struct pm_dev *pmdev;
 	void *ret;
-	int err;
+	int err, chip_index;
 
 	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
 
+
+ 	for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
+		if (!dev_self[chip_index])
+			break;
+	}
+
+	if (chip_index == ARRAY_SIZE(dev_self)) {
+		IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __FUNCTION__);
+		return -ENOMEM;
+	}
+
 	IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name,
 		     info->cfg_base);
 
@@ -271,8 +369,8 @@ static int __init nsc_ircc_open(int i, chipio_t *info)
 	spin_lock_init(&self->lock);
    
 	/* Need to store self somewhere */
-	dev_self[i] = self;
-	self->index = i;
+	dev_self[chip_index] = self;
+	self->index = chip_index;
 
 	/* Initialize IO */
 	self->io.cfg_base  = info->cfg_base;
@@ -351,7 +449,7 @@ static int __init nsc_ircc_open(int i, chipio_t *info)
 
 	/* Check if user has supplied a valid dongle id or not */
 	if ((dongle_id <= 0) ||
-	    (dongle_id >= (sizeof(dongle_types) / sizeof(dongle_types[0]))) ) {
+	    (dongle_id >= ARRAY_SIZE(dongle_types))) {
 		dongle_id = nsc_ircc_read_dongle_id(self->io.fir_base);
 		
 		IRDA_MESSAGE("%s, Found dongle: %s\n", driver_name,
@@ -364,11 +462,18 @@ static int __init nsc_ircc_open(int i, chipio_t *info)
 	self->io.dongle_id = dongle_id;
 	nsc_ircc_init_dongle_interface(self->io.fir_base, dongle_id);
 
-        pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, nsc_ircc_pmproc);
-        if (pmdev)
-                pmdev->data = self;
+ 	self->pldev = platform_device_register_simple(NSC_IRCC_DRIVER_NAME,
+ 						      self->index, NULL, 0);
+ 	if (IS_ERR(self->pldev)) {
+ 		err = PTR_ERR(self->pldev);
+ 		goto out5;
+ 	}
+ 	platform_set_drvdata(self->pldev, self);
 
-	return 0;
+	return chip_index;
+
+ out5:
+ 	unregister_netdev(dev);
  out4:
 	dma_free_coherent(NULL, self->tx_buff.truesize,
 			  self->tx_buff.head, self->tx_buff_dma);
@@ -379,7 +484,7 @@ static int __init nsc_ircc_open(int i, chipio_t *info)
 	release_region(self->io.fir_base, self->io.fir_ext);
  out1:
 	free_netdev(dev);
-	dev_self[i] = NULL;
+	dev_self[chip_index] = NULL;
 	return err;
 }
 
@@ -399,6 +504,8 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self)
 
         iobase = self->io.fir_base;
 
+	platform_device_unregister(self->pldev);
+
 	/* Remove netdevice */
 	unregister_netdev(self->netdev);
 
@@ -806,6 +913,43 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info)
 	return 0;
 }
 
+/* PNP probing */
+static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
+{
+	memset(&pnp_info, 0, sizeof(chipio_t));
+	pnp_info.irq = -1;
+	pnp_info.dma = -1;
+	pnp_succeeded = 1;
+
+	/* There don't seem to be any way to get the cfg_base.
+	 * On my box, cfg_base is in the PnP descriptor of the
+	 * motherboard. Oh well... Jean II */
+
+	if (pnp_port_valid(dev, 0) &&
+		!(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED))
+		pnp_info.fir_base = pnp_port_start(dev, 0);
+
+	if (pnp_irq_valid(dev, 0) &&
+		!(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED))
+		pnp_info.irq = pnp_irq(dev, 0);
+
+	if (pnp_dma_valid(dev, 0) &&
+		!(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED))
+		pnp_info.dma = pnp_dma(dev, 0);
+
+	IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
+		   __FUNCTION__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
+
+	if((pnp_info.fir_base == 0) ||
+	   (pnp_info.irq == -1) || (pnp_info.dma == -1)) {
+		/* Returning an error will disable the device. Yuck ! */
+		//return -EINVAL;
+		pnp_succeeded = 0;
+	}
+
+	return 0;
+}
+
 /*
  * Function nsc_ircc_setup (info)
  *
@@ -2161,45 +2305,83 @@ static struct net_device_stats *nsc_ircc_net_get_stats(struct net_device *dev)
 	return &self->stats;
 }
 
-static void nsc_ircc_suspend(struct nsc_ircc_cb *self)
+static int nsc_ircc_suspend(struct platform_device *dev, pm_message_t state)
 {
-	IRDA_MESSAGE("%s, Suspending\n", driver_name);
+     	struct nsc_ircc_cb *self = platform_get_drvdata(dev);
+ 	int bank;
+	unsigned long flags;
+ 	int iobase = self->io.fir_base;
 
 	if (self->io.suspended)
-		return;
+		return 0;
 
-	nsc_ircc_net_close(self->netdev);
+	IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
 
+	rtnl_lock();
+	if (netif_running(self->netdev)) {
+		netif_device_detach(self->netdev);
+		spin_lock_irqsave(&self->lock, flags);
+		/* Save current bank */
+		bank = inb(iobase+BSR);
+
+		/* Disable interrupts */
+		switch_bank(iobase, BANK0);
+		outb(0, iobase+IER);
+
+		/* Restore bank register */
+		outb(bank, iobase+BSR);
+
+		spin_unlock_irqrestore(&self->lock, flags);
+		free_irq(self->io.irq, self->netdev);
+		disable_dma(self->io.dma);
+	}
 	self->io.suspended = 1;
+	rtnl_unlock();
+
+	return 0;
 }
 
-static void nsc_ircc_wakeup(struct nsc_ircc_cb *self)
+static int nsc_ircc_resume(struct platform_device *dev)
 {
+ 	struct nsc_ircc_cb *self = platform_get_drvdata(dev);
+ 	unsigned long flags;
+
 	if (!self->io.suspended)
-		return;
+		return 0;
 
+	IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
+
+	rtnl_lock();
 	nsc_ircc_setup(&self->io);
-	nsc_ircc_net_open(self->netdev);
-	
-	IRDA_MESSAGE("%s, Waking up\n", driver_name);
+	nsc_ircc_init_dongle_interface(self->io.fir_base, self->io.dongle_id);
 
+	if (netif_running(self->netdev)) {
+		if (request_irq(self->io.irq, nsc_ircc_interrupt, 0,
+				self->netdev->name, self->netdev)) {
+ 		    	IRDA_WARNING("%s, unable to allocate irq=%d\n",
+				     driver_name, self->io.irq);
+
+			/*
+			 * Don't fail resume process, just kill this
+			 * network interface
+			 */
+			unregister_netdevice(self->netdev);
+		} else {
+			spin_lock_irqsave(&self->lock, flags);
+			nsc_ircc_change_speed(self, self->io.speed);
+			spin_unlock_irqrestore(&self->lock, flags);
+			netif_device_attach(self->netdev);
+		}
+
+	} else {
+		spin_lock_irqsave(&self->lock, flags);
+		nsc_ircc_change_speed(self, 9600);
+		spin_unlock_irqrestore(&self->lock, flags);
+	}
 	self->io.suspended = 0;
-}
+	rtnl_unlock();
 
-static int nsc_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data)
-{
-        struct nsc_ircc_cb *self = (struct nsc_ircc_cb*) dev->data;
-        if (self) {
-                switch (rqst) {
-                case PM_SUSPEND:
-                        nsc_ircc_suspend(self);
-                        break;
-                case PM_RESUME:
-                        nsc_ircc_wakeup(self);
-                        break;
-                }
-        }
-	return 0;
+ 	return 0;
 }
 
 MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index 6edf7e51462..dacf671abcd 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -269,7 +269,7 @@ struct nsc_ircc_cb {
 	__u32 new_speed;
 	int index;                 /* Instance index */
 
-        struct pm_dev *dev;
+	struct platform_device *pldev;
 };
 
 static inline void switch_bank(int iobase, int bank)
diff --git a/drivers/net/irda/sir_dongle.c b/drivers/net/irda/sir_dongle.c
index 8d225921ae7..d7e32d9554f 100644
--- a/drivers/net/irda/sir_dongle.c
+++ b/drivers/net/irda/sir_dongle.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/smp_lock.h>
 #include <linux/kmod.h>
+#include <linux/mutex.h>
 
 #include <net/irda/irda.h>
 
@@ -28,7 +29,7 @@
  */
 
 static LIST_HEAD(dongle_list);			/* list of registered dongle drivers */
-static DECLARE_MUTEX(dongle_list_lock);		/* protects the list */
+static DEFINE_MUTEX(dongle_list_lock);		/* protects the list */
 
 int irda_register_dongle(struct dongle_driver *new)
 {
@@ -38,25 +39,25 @@ int irda_register_dongle(struct dongle_driver *new)
 	IRDA_DEBUG(0, "%s : registering dongle \"%s\" (%d).\n",
 		   __FUNCTION__, new->driver_name, new->type);
 
-	down(&dongle_list_lock);
+	mutex_lock(&dongle_list_lock);
 	list_for_each(entry, &dongle_list) {
 		drv = list_entry(entry, struct dongle_driver, dongle_list);
 		if (new->type == drv->type) {
-			up(&dongle_list_lock);
+			mutex_unlock(&dongle_list_lock);
 			return -EEXIST;
 		}
 	}
 	list_add(&new->dongle_list, &dongle_list);
-	up(&dongle_list_lock);
+	mutex_unlock(&dongle_list_lock);
 	return 0;
 }
 EXPORT_SYMBOL(irda_register_dongle);
 
 int irda_unregister_dongle(struct dongle_driver *drv)
 {
-	down(&dongle_list_lock);
+	mutex_lock(&dongle_list_lock);
 	list_del(&drv->dongle_list);
-	up(&dongle_list_lock);
+	mutex_unlock(&dongle_list_lock);
 	return 0;
 }
 EXPORT_SYMBOL(irda_unregister_dongle);
@@ -75,7 +76,7 @@ int sirdev_get_dongle(struct sir_dev *dev, IRDA_DONGLE type)
 		return -EBUSY;
 	
 	/* serialize access to the list of registered dongles */
-	down(&dongle_list_lock);
+	mutex_lock(&dongle_list_lock);
 
 	list_for_each(entry, &dongle_list) {
 		drv = list_entry(entry, struct dongle_driver, dongle_list);
@@ -109,14 +110,14 @@ int sirdev_get_dongle(struct sir_dev *dev, IRDA_DONGLE type)
 	if (!drv->open  ||  (err=drv->open(dev))!=0)
 		goto out_reject;		/* failed to open driver */
 
-	up(&dongle_list_lock);
+	mutex_unlock(&dongle_list_lock);
 	return 0;
 
 out_reject:
 	dev->dongle_drv = NULL;
 	module_put(drv->owner);
 out_unlock:
-	up(&dongle_list_lock);
+	mutex_unlock(&dongle_list_lock);
 	return err;
 }
 
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
new file mode 100644
index 00000000000..aa1a9b0ed83
--- /dev/null
+++ b/drivers/net/irda/toim3232-sir.c
@@ -0,0 +1,375 @@
+/*********************************************************************
+ *
+ * Filename:      toim3232-sir.c
+ * Version:       1.0
+ * Description:   Implementation of dongles based on the Vishay/Temic
+ * 		  TOIM3232 SIR Endec chipset. Currently only the
+ * 		  IRWave IR320ST-2 is tested, although it should work
+ * 		  with any TOIM3232 or TOIM4232 chipset based RS232
+ * 		  dongle with minimal modification.
+ * 		  Based heavily on the Tekram driver (tekram.c),
+ * 		  with thanks to Dag Brattli and Martin Diehl.
+ * Status:        Experimental.
+ * Author:        David Basden <davidb-irda@rcpt.to>
+ * Created at:    Thu Feb 09 23:47:32 2006
+ *
+ *     Copyright (c) 2006 David Basden.
+ *     Copyright (c) 1998-1999 Dag Brattli,
+ *     Copyright (c) 2002 Martin Diehl,
+ *     All Rights Reserved.
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+/*
+ * This driver has currently only been tested on the IRWave IR320ST-2
+ *
+ * PROTOCOL:
+ *
+ * The protocol for talking to the TOIM3232 is quite easy, and is
+ * designed to interface with RS232 with only level convertors. The
+ * BR/~D line on the chip is brought high to signal 'command mode',
+ * where a command byte is sent to select the baudrate of the RS232
+ * interface and the pulse length of the IRDA output. When BR/~D
+ * is brought low, the dongle then changes to the selected baudrate,
+ * and the RS232 interface is used for data until BR/~D is brought
+ * high again. The initial speed for the TOIMx323 after RESET is
+ * 9600 baud.  The baudrate for command-mode is the last selected
+ * baud-rate, or 9600 after a RESET.
+ *
+ * The  dongle I have (below) adds some extra hardware on the front end,
+ * but this is mostly directed towards pariasitic power from the RS232
+ * line rather than changing very much about how to communicate with
+ * the TOIM3232.
+ *
+ * The protocol to talk to the TOIM4232 chipset seems to be almost
+ * identical to the TOIM3232 (and the 4232 datasheet is more detailed)
+ * so this code will probably work on that as well, although I haven't
+ * tested it on that hardware.
+ *
+ * Target dongle variations that might be common:
+ *
+ * DTR and RTS function:
+ *   The data sheet for the 4232 has a sample implementation that hooks the
+ *   DTR and RTS lines to the RESET and BaudRate/~Data lines of the
+ *   chip (through line-converters). Given both DTR and RTS would have to
+ *   be held low in normal operation, and the TOIMx232 requires +5V to
+ *   signal ground, most dongle designers would almost certainly choose
+ *   an implementation that kept at least one of DTR or RTS high in
+ *   normal operation to provide power to the dongle, but will likely
+ *   vary between designs.
+ *
+ * User specified command bits:
+ *  There are two user-controllable output lines from the TOIMx232 that
+ *  can be set low or high by setting the appropriate bits in the
+ *  high-nibble of the command byte (when setting speed and pulse length).
+ *  These might be used to switch on and off added hardware or extra
+ *  dongle features.
+ *
+ *
+ * Target hardware: IRWave IR320ST-2
+ *
+ * 	The IRWave IR320ST-2 is a simple dongle based on the Vishay/Temic
+ * 	TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transciever.
+ * 	It uses a hex inverter and some discrete components to buffer and
+ * 	line convert the RS232 down to 5V.
+ *
+ * 	The dongle is powered through a voltage regulator, fed by a large
+ * 	capacitor. To switch the dongle on, DTR is brought high to charge
+ * 	the capacitor and drive the voltage regulator. DTR isn't associated
+ * 	with any control lines on the TOIM3232. Parisitic power is also taken
+ * 	from the RTS, TD and RD lines when brought high, but through resistors.
+ * 	When DTR is low, the circuit might lose power even with RTS high.
+ *
+ * 	RTS is inverted and attached to the BR/~D input pin. When RTS
+ * 	is high, BR/~D is low, and the TOIM3232 is in the normal 'data' mode.
+ * 	RTS is brought low, BR/~D is high, and the TOIM3232 is in 'command
+ * 	mode'.
+ *
+ * 	For some unknown reason, the RESET line isn't actually connected
+ * 	to anything. This means to reset the dongle to get it to a known
+ * 	state (9600 baud) you must drop DTR and RTS low, wait for the power
+ * 	capacitor to discharge, and then bring DTR (and RTS for data mode)
+ * 	high again, and wait for the capacitor to charge, the power supply
+ * 	to stabilise, and the oscillator clock to stabilise.
+ *
+ * 	Fortunately, if the current baudrate is known, the chipset can
+ * 	easily change speed by entering command mode without having to
+ * 	reset the dongle first.
+ *
+ * 	Major Components:
+ *
+ * 	- Vishay/Temic TOIM3232 SIR Endec to change RS232 pulse timings
+ * 	  to IRDA pulse timings
+ * 	- 3.6864MHz crystal to drive TOIM3232 clock oscillator
+ * 	- DM74lS04M Inverting Hex line buffer for RS232 input buffering
+ * 	  and level conversion
+ * 	- PJ2951AC 150mA voltage regulator
+ * 	- Vishay/Temic TFDS4500	SIR IRDA front-end transceiver
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+
+#include "sir-dev.h"
+
+static int toim3232delay = 150;	/* default is 150 ms */
+module_param(toim3232delay, int, 0);
+MODULE_PARM_DESC(toim3232delay, "toim3232 dongle write complete delay");
+
+#if 0
+static int toim3232flipdtr = 0;	/* default is DTR high to reset */
+module_param(toim3232flipdtr, int, 0);
+MODULE_PARM_DESC(toim3232flipdtr, "toim3232 dongle invert DTR (Reset)");
+
+static int toim3232fliprts = 0;	/* default is RTS high for baud change */
+module_param(toim3232fliptrs, int, 0);
+MODULE_PARM_DESC(toim3232fliprts, "toim3232 dongle invert RTS (BR/D)");
+#endif
+
+static int toim3232_open(struct sir_dev *);
+static int toim3232_close(struct sir_dev *);
+static int toim3232_change_speed(struct sir_dev *, unsigned);
+static int toim3232_reset(struct sir_dev *);
+
+#define TOIM3232_115200 0x00
+#define TOIM3232_57600  0x01
+#define TOIM3232_38400  0x02
+#define TOIM3232_19200  0x03
+#define TOIM3232_9600   0x06
+#define TOIM3232_2400   0x0A
+
+#define TOIM3232_PW     0x10 /* Pulse select bit */
+
+static struct dongle_driver toim3232 = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "Vishay TOIM3232",
+	.type		= IRDA_TOIM3232_DONGLE,
+	.open		= toim3232_open,
+	.close		= toim3232_close,
+	.reset		= toim3232_reset,
+	.set_speed	= toim3232_change_speed,
+};
+
+static int __init toim3232_sir_init(void)
+{
+	if (toim3232delay < 1  ||  toim3232delay > 500)
+		toim3232delay = 200;
+	IRDA_DEBUG(1, "%s - using %d ms delay\n",
+		toim3232.driver_name, toim3232delay);
+	return irda_register_dongle(&toim3232);
+}
+
+static void __exit toim3232_sir_cleanup(void)
+{
+	irda_unregister_dongle(&toim3232);
+}
+
+static int toim3232_open(struct sir_dev *dev)
+{
+	struct qos_info *qos = &dev->qos;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	/* Pull the lines high to start with.
+	 *
+	 * For the IR320ST-2, we need to charge the main supply capacitor to
+	 * switch the device on. We keep DTR high throughout to do this.
+	 * When RTS, TD and RD are high, they will also trickle-charge the
+	 * cap. RTS is high for data transmission, and low for baud rate select.
+	 * 	-- DGB
+	 */
+	sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+	/* The TOI3232 supports many speeds between 1200bps and 115000bps.
+	 * We really only care about those supported by the IRDA spec, but
+	 * 38400 seems to be implemented in many places */
+	qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+
+	/* From the tekram driver. Not sure what a reasonable value is -- DGB */
+	qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
+	irda_qos_bits_to_value(qos);
+
+	/* irda thread waits 50 msec for power settling */
+
+	return 0;
+}
+
+static int toim3232_close(struct sir_dev *dev)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	/* Power off dongle */
+	sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+	return 0;
+}
+
+/*
+ * Function toim3232change_speed (dev, state, speed)
+ *
+ *    Set the speed for the TOIM3232 based dongle. Warning, this
+ *    function must be called with a process context!
+ *
+ *    Algorithm
+ *    1. keep DTR high but clear RTS to bring into baud programming mode
+ *    2. wait at least 7us to enter programming mode
+ *    3. send control word to set baud rate and timing
+ *    4. wait at least 1us
+ *    5. bring RTS high to enter DATA mode (RS232 is passed through to transceiver)
+ *    6. should take effect immediately (although probably worth waiting)
+ */
+
+#define TOIM3232_STATE_WAIT_SPEED	(SIRDEV_STATE_DONGLE_SPEED + 1)
+
+static int toim3232_change_speed(struct sir_dev *dev, unsigned speed)
+{
+	unsigned state = dev->fsm.substate;
+	unsigned delay = 0;
+	u8 byte;
+	static int ret = 0;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	switch(state) {
+	case SIRDEV_STATE_DONGLE_SPEED:
+
+		/* Figure out what we are going to send as a control byte */
+		switch (speed) {
+		case 2400:
+			byte = TOIM3232_PW|TOIM3232_2400;
+			break;
+		default:
+			speed = 9600;
+			ret = -EINVAL;
+			/* fall thru */
+		case 9600:
+			byte = TOIM3232_PW|TOIM3232_9600;
+			break;
+		case 19200:
+			byte = TOIM3232_PW|TOIM3232_19200;
+			break;
+		case 38400:
+			byte = TOIM3232_PW|TOIM3232_38400;
+			break;
+		case 57600:
+			byte = TOIM3232_PW|TOIM3232_57600;
+			break;
+		case 115200:
+			byte = TOIM3232_115200;
+			break;
+		}
+
+		/* Set DTR, Clear RTS: Go into baud programming mode */
+		sirdev_set_dtr_rts(dev, TRUE, FALSE);
+
+		/* Wait at least 7us */
+		udelay(14);
+
+		/* Write control byte */
+		sirdev_raw_write(dev, &byte, 1);
+
+		dev->speed = speed;
+
+		state = TOIM3232_STATE_WAIT_SPEED;
+		delay = toim3232delay;
+		break;
+
+	case TOIM3232_STATE_WAIT_SPEED:
+		/* Have transmitted control byte * Wait for 'at least 1us' */
+		udelay(14);
+
+		/* Set DTR, Set RTS: Go into normal data mode */
+		sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+		/* Wait (TODO: check this is needed) */
+		udelay(50);
+		break;
+
+	default:
+		printk(KERN_ERR "%s - undefined state %d\n", __FUNCTION__, state);
+		ret = -EINVAL;
+		break;
+	}
+
+	dev->fsm.substate = state;
+	return (delay > 0) ? delay : ret;
+}
+
+/*
+ * Function toim3232reset (driver)
+ *
+ *      This function resets the toim3232 dongle. Warning, this function
+ *      must be called with a process context!!
+ *
+ * What we should do is:
+ * 	0. Pull RESET high
+ * 	1. Wait for at least 7us
+ * 	2. Pull RESET low
+ * 	3. Wait for at least 7us
+ * 	4. Pull BR/~D high
+ * 	5. Wait for at least 7us
+ * 	6. Send control byte to set baud rate
+ * 	7. Wait at least 1us after stop bit
+ * 	8. Pull BR/~D low
+ * 	9. Should then be in data mode
+ *
+ * Because the IR320ST-2 doesn't have the RESET line connected for some reason,
+ * we'll have to do something else.
+ *
+ * The default speed after a RESET is 9600, so lets try just bringing it up in
+ * data mode after switching it off, waiting for the supply capacitor to
+ * discharge, and then switch it back on. This isn't actually pulling RESET
+ * high, but it seems to have the same effect.
+ *
+ * This behaviour will probably work on dongles that have the RESET line connected,
+ * but if not, add a flag for the IR320ST-2, and implment the above-listed proper
+ * behaviour.
+ *
+ * RTS is inverted and then fed to BR/~D, so to put it in programming mode, we
+ * need to have pull RTS low
+ */
+
+static int toim3232_reset(struct sir_dev *dev)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	/* Switch off both DTR and RTS to switch off dongle */
+	sirdev_set_dtr_rts(dev, FALSE, FALSE);
+
+	/* Should sleep a while. This might be evil doing it this way.*/
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(msecs_to_jiffies(50));
+
+	/* Set DTR, Set RTS (data mode) */
+	sirdev_set_dtr_rts(dev, TRUE, TRUE);
+
+	/* Wait at least 10 ms for power to stabilize again */
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(msecs_to_jiffies(10));
+
+	/* Speed should now be 9600 */
+	dev->speed = 9600;
+
+	return 0;
+}
+
+MODULE_AUTHOR("David Basden <davidb-linux@rcpt.to>");
+MODULE_DESCRIPTION("Vishay/Temic TOIM3232 based dongle driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("irda-dongle-12"); /* IRDA_TOIM3232_DONGLE */
+
+module_init(toim3232_sir_init);
+module_exit(toim3232_sir_cleanup);
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index a9f49f058cf..97a49e0be76 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -1887,7 +1887,7 @@ static int __init vlsi_mod_init(void)
 		vlsi_proc_root->owner = THIS_MODULE;
 	}
 
-	ret = pci_module_init(&vlsi_irda_driver);
+	ret = pci_register_driver(&vlsi_irda_driver);
 
 	if (ret && vlsi_proc_root)
 		remove_proc_entry(PROC_DIR, NULL);