ixgb: enable sun hardware support for broadcom phy

Implement support for a SUN-specific PHY.

SUN provides a modified 82597-based board with their own
PHY that works with very little modification to the code. This
patch implements this new PHY which is identified by the
subvendor device ID. The device ID of the adapter remains
the same.

Signed-off-by: Matheos Worku <matheos.worku@sun.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 80 insertions, 2 deletions

diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c
index 2c6367ace3c..80a8b988822 100644
--- a/drivers/net/ixgb/ixgb_hw.c
+++ b/drivers/net/ixgb/ixgb_hw.c
@@ -45,6 +45,8 @@ static boolean_t ixgb_link_reset(struct ixgb_hw *hw);
 
 static void ixgb_optics_reset(struct ixgb_hw *hw);
 
+static void ixgb_optics_reset_bcm(struct ixgb_hw *hw);
+
 static ixgb_phy_type ixgb_identify_phy(struct ixgb_hw *hw);
 
 static void ixgb_clear_hw_cntrs(struct ixgb_hw *hw);
@@ -90,10 +92,20 @@ static uint32_t ixgb_mac_reset(struct ixgb_hw *hw)
 	ASSERT(!(ctrl_reg & IXGB_CTRL0_RST));
 #endif
 
-	if (hw->phy_type == ixgb_phy_type_txn17401) {
-		ixgb_optics_reset(hw);
+	if (hw->subsystem_vendor_id == SUN_SUBVENDOR_ID) {
+		ctrl_reg =  /* Enable interrupt from XFP and SerDes */
+			   IXGB_CTRL1_GPI0_EN |
+			   IXGB_CTRL1_SDP6_DIR |
+			   IXGB_CTRL1_SDP7_DIR |
+			   IXGB_CTRL1_SDP6 |
+			   IXGB_CTRL1_SDP7;
+		IXGB_WRITE_REG(hw, CTRL1, ctrl_reg);
+		ixgb_optics_reset_bcm(hw);
 	}
 
+	if (hw->phy_type == ixgb_phy_type_txn17401)
+		ixgb_optics_reset(hw);
+
 	return ctrl_reg;
 }
 
@@ -253,6 +265,10 @@ ixgb_identify_phy(struct ixgb_hw *hw)
 		break;
 	}
 
+	/* update phy type for sun specific board */
+	if (hw->subsystem_vendor_id == SUN_SUBVENDOR_ID)
+		phy_type = ixgb_phy_type_bcm;
+
 	return (phy_type);
 }
 
@@ -1225,3 +1241,65 @@ ixgb_optics_reset(struct ixgb_hw *hw)
 
 	return;
 }
+
+/******************************************************************************
+ * Resets the 10GbE optics module for Sun variant NIC.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+
+#define   IXGB_BCM8704_USER_PMD_TX_CTRL_REG         0xC803
+#define   IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL     0x0164
+#define   IXGB_BCM8704_USER_CTRL_REG                0xC800
+#define   IXGB_BCM8704_USER_CTRL_REG_VAL            0x7FBF
+#define   IXGB_BCM8704_USER_DEV3_ADDR               0x0003
+#define   IXGB_SUN_PHY_ADDRESS                      0x0000
+#define   IXGB_SUN_PHY_RESET_DELAY                     305
+
+static void
+ixgb_optics_reset_bcm(struct ixgb_hw *hw)
+{
+	u32 ctrl = IXGB_READ_REG(hw, CTRL0);
+	ctrl &= ~IXGB_CTRL0_SDP2;
+	ctrl |= IXGB_CTRL0_SDP3;
+	IXGB_WRITE_REG(hw, CTRL0, ctrl);
+
+	/* SerDes needs extra delay */
+	msleep(IXGB_SUN_PHY_RESET_DELAY);
+
+	/* Broadcom 7408L configuration */
+	/* Reference clock config */
+	ixgb_write_phy_reg(hw,
+			   IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
+			   IXGB_SUN_PHY_ADDRESS,
+			   IXGB_BCM8704_USER_DEV3_ADDR,
+			   IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL);
+	/*  we must read the registers twice */
+	ixgb_read_phy_reg(hw,
+			  IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
+			  IXGB_SUN_PHY_ADDRESS,
+			  IXGB_BCM8704_USER_DEV3_ADDR);
+	ixgb_read_phy_reg(hw,
+			  IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
+			  IXGB_SUN_PHY_ADDRESS,
+			  IXGB_BCM8704_USER_DEV3_ADDR);
+
+	ixgb_write_phy_reg(hw,
+			   IXGB_BCM8704_USER_CTRL_REG,
+			   IXGB_SUN_PHY_ADDRESS,
+			   IXGB_BCM8704_USER_DEV3_ADDR,
+			   IXGB_BCM8704_USER_CTRL_REG_VAL);
+	ixgb_read_phy_reg(hw,
+			  IXGB_BCM8704_USER_CTRL_REG,
+			  IXGB_SUN_PHY_ADDRESS,
+			  IXGB_BCM8704_USER_DEV3_ADDR);
+	ixgb_read_phy_reg(hw,
+			  IXGB_BCM8704_USER_CTRL_REG,
+			  IXGB_SUN_PHY_ADDRESS,
+			  IXGB_BCM8704_USER_DEV3_ADDR);
+
+	/* SerDes needs extra delay */
+	msleep(IXGB_SUN_PHY_RESET_DELAY);
+
+	return;
+}