summaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgb
diff options
context:
space:
mode:
authorLinas Vepstas <linas@austin.ibm.com>2006-08-31 14:27:52 -0700
committerAuke Kok <juke-jan.h.kok@intel.com>2006-08-31 14:27:52 -0700
commit01748fbb413d6f3b36c330544969d1d7254ee509 (patch)
tree1148455cf4d76d0b4bc17186790710282339449c /drivers/net/ixgb
parentadc5413965e6ca2cd18f0ec89933f762b5605574 (diff)
ixgb: Add PCI Error recovery callbacks
Adds PCI Error recovery callbacks to the Intel 10-gigabit ethernet ixgb device driver. Lightly tested, works. "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> wrote: Both pci_disable_device and ixgb_down would access the device. It doesn't follow Documentation/pci-error-recovery.txt that error_detected shouldn't do any access to the device. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Diffstat (limited to 'drivers/net/ixgb')
-rw-r--r--drivers/net/ixgb/ixgb_main.c112
1 files changed, 111 insertions, 1 deletions
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index a5da48a1fca..abca75fd289 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -118,15 +118,26 @@ static void ixgb_restore_vlan(struct ixgb_adapter *adapter);
static void ixgb_netpoll(struct net_device *dev);
#endif
-/* Exported from other modules */
+static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev,
+ enum pci_channel_state state);
+static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev);
+static void ixgb_io_resume (struct pci_dev *pdev);
+/* Exported from other modules */
extern void ixgb_check_options(struct ixgb_adapter *adapter);
+static struct pci_error_handlers ixgb_err_handler = {
+ .error_detected = ixgb_io_error_detected,
+ .slot_reset = ixgb_io_slot_reset,
+ .resume = ixgb_io_resume,
+};
+
static struct pci_driver ixgb_driver = {
.name = ixgb_driver_name,
.id_table = ixgb_pci_tbl,
.probe = ixgb_probe,
.remove = __devexit_p(ixgb_remove),
+ .err_handler = &ixgb_err_handler
};
MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
@@ -1550,6 +1561,11 @@ void
ixgb_update_stats(struct ixgb_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* Prevent stats update while adapter is being reset */
+ if (pdev->error_state && pdev->error_state != pci_channel_io_normal)
+ return;
if((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) ||
(netdev->mc_count > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) {
@@ -2205,4 +2221,98 @@ static void ixgb_netpoll(struct net_device *dev)
}
#endif
+/**
+ * ixgb_io_error_detected() - called when PCI error is detected
+ * @pdev pointer to pci device with error
+ * @state pci channel state after error
+ *
+ * This callback is called by the PCI subsystem whenever
+ * a PCI bus error is detected.
+ */
+static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev,
+ enum pci_channel_state state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgb_adapter *adapter = netdev->priv;
+
+ if(netif_running(netdev))
+ ixgb_down(adapter, TRUE);
+
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * ixgb_io_slot_reset - called after the pci bus has been reset.
+ * @pdev pointer to pci device with error
+ *
+ * This callback is called after the PCI buss has been reset.
+ * Basically, this tries to restart the card from scratch.
+ * This is a shortened version of the device probe/discovery code,
+ * it resembles the first-half of the ixgb_probe() routine.
+ */
+static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgb_adapter *adapter = netdev->priv;
+
+ if(pci_enable_device(pdev)) {
+ DPRINTK(PROBE, ERR, "Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ /* Perform card reset only on one instance of the card */
+ if (0 != PCI_FUNC (pdev->devfn))
+ return PCI_ERS_RESULT_RECOVERED;
+
+ pci_set_master(pdev);
+
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+ ixgb_reset(adapter);
+
+ /* Make sure the EEPROM is good */
+ if(!ixgb_validate_eeprom_checksum(&adapter->hw)) {
+ DPRINTK(PROBE, ERR, "After reset, the EEPROM checksum is not valid.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr);
+ memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+
+ if(!is_valid_ether_addr(netdev->perm_addr)) {
+ DPRINTK(PROBE, ERR, "After reset, invalid MAC address.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * ixgb_io_resume - called when its OK to resume normal operations
+ * @pdev pointer to pci device with error
+ *
+ * The error recovery driver tells us that its OK to resume
+ * normal operation. Implementation resembles the second-half
+ * of the ixgb_probe() routine.
+ */
+static void ixgb_io_resume (struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgb_adapter *adapter = netdev->priv;
+
+ pci_set_master(pdev);
+
+ if(netif_running(netdev)) {
+ if(ixgb_up(adapter)) {
+ printk ("ixgb: can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+ mod_timer(&adapter->watchdog_timer, jiffies);
+}
+
/* ixgb_main.c */