Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits)
  myri10ge: update driver version number to 1.4.3-1.369
  r8169: add shutdown handler
  r8169: preliminary 8168d support
  r8169: support additional 8168cp chipset
  r8169: change default behavior for mildly identified 8168c chipsets
  r8169: add a new 8168cp flavor
  r8169: add a new 8168c flavor (bis)
  r8169: add a new 8168c flavor
  r8169: sync existing 8168 device hardware start sequences with vendor driver
  r8169: 8168b Tx performance tweak
  r8169: make room for more specific 8168 hardware start procedure
  r8169: shuffle some registers handling around (8168 operation only)
  r8169: new phy init parameters for the 8168b
  r8169: update phy init parameters
  r8169: wake up the PHY of the 8168
  af_key: fix SADB_X_SPDDELETE response
  ath9k: Fix return code when ath9k_hw_setpower() fails on reset
  ath9k: remove nasty FAIL macro from ath9k_hw_reset()
  gre: minor cleanups in netlink interface
  gre: fix copy and paste error
  ...

1 files changed, 521 insertions, 107 deletions

diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index f96358b641a..7cddcfba809 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2007 Intel Corporation.
+  Copyright(c) 1999 - 2008 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -20,7 +20,6 @@
   the file called "COPYING".
 
   Contact Information:
-  Linux NICS <linux.nics@intel.com>
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 
@@ -36,67 +35,62 @@
 #define IXGBE_82598_MAX_TX_QUEUES 32
 #define IXGBE_82598_MAX_RX_QUEUES 64
 #define IXGBE_82598_RAR_ENTRIES   16
+#define IXGBE_82598_MC_TBL_SIZE  128
+#define IXGBE_82598_VFT_TBL_SIZE 128
 
-static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
-					 bool *autoneg);
-static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
-						u32 *speed, bool *autoneg);
-static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
-				      bool *link_up);
-static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
-					    bool autoneg,
-					    bool autoneg_wait_to_complete);
+static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
+                                             ixgbe_link_speed *speed,
+                                             bool *autoneg);
 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
-					       bool autoneg,
-					       bool autoneg_wait_to_complete);
-static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw);
-
+static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+                                               ixgbe_link_speed speed,
+                                               bool autoneg,
+                                               bool autoneg_wait_to_complete);
 
+/**
+ */
 static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
 {
-	hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
-	hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
-	hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES;
-
-	/* PHY ops are filled in by default properly for Fiber only */
-	if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) {
-		hw->mac.ops.setup_link = &ixgbe_setup_copper_link_82598;
-		hw->mac.ops.setup_link_speed = &ixgbe_setup_copper_link_speed_82598;
-		hw->mac.ops.get_link_settings =
-				&ixgbe_get_copper_link_settings_82598;
-
-		/* Call PHY identify routine to get the phy type */
-		ixgbe_identify_phy(hw);
-
-		switch (hw->phy.type) {
-		case ixgbe_phy_tn:
-			hw->phy.ops.setup_link = &ixgbe_setup_tnx_phy_link;
-			hw->phy.ops.check_link = &ixgbe_check_tnx_phy_link;
-			hw->phy.ops.setup_link_speed =
-					&ixgbe_setup_tnx_phy_link_speed;
-			break;
-		default:
-			break;
-		}
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+
+	/* Call PHY identify routine to get the phy type */
+	ixgbe_identify_phy_generic(hw);
+
+	/* PHY Init */
+	switch (phy->type) {
+	default:
+		break;
 	}
 
+	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+		mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
+		mac->ops.setup_link_speed =
+		                     &ixgbe_setup_copper_link_speed_82598;
+		mac->ops.get_link_capabilities =
+		                     &ixgbe_get_copper_link_capabilities_82598;
+	}
+
+	mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
+	mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
+
 	return 0;
 }
 
 /**
- *  ixgbe_get_link_settings_82598 - Determines default link settings
+ *  ixgbe_get_link_capabilities_82598 - Determines link capabilities
  *  @hw: pointer to hardware structure
  *  @speed: pointer to link speed
  *  @autoneg: boolean auto-negotiation value
  *
- *  Determines the default link settings by reading the AUTOC register.
+ *  Determines the link capabilities by reading the AUTOC register.
  **/
-static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
-					 bool *autoneg)
+static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
+                                             ixgbe_link_speed *speed,
+                                             bool *autoneg)
 {
 	s32 status = 0;
 	s32 autoc_reg;
@@ -145,15 +139,16 @@ static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
 }
 
 /**
- *  ixgbe_get_copper_link_settings_82598 - Determines default link settings
+ *  ixgbe_get_copper_link_capabilities_82598 - Determines link capabilities
  *  @hw: pointer to hardware structure
  *  @speed: pointer to link speed
  *  @autoneg: boolean auto-negotiation value
  *
- *  Determines the default link settings by reading the AUTOC register.
+ *  Determines the link capabilities by reading the AUTOC register.
  **/
-static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
-						u32 *speed, bool *autoneg)
+s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
+                                             ixgbe_link_speed *speed,
+                                             bool *autoneg)
 {
 	s32 status = IXGBE_ERR_LINK_SETUP;
 	u16 speed_ability;
@@ -161,9 +156,9 @@ static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
 	*speed = 0;
 	*autoneg = true;
 
-	status = ixgbe_read_phy_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
-				    IXGBE_MDIO_PMA_PMD_DEV_TYPE,
-				    &speed_ability);
+	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
+	                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+	                              &speed_ability);
 
 	if (status == 0) {
 		if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
@@ -191,11 +186,9 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
 	case IXGBE_DEV_ID_82598EB_CX4:
 	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+	case IXGBE_DEV_ID_82598EB_XF_LR:
 		media_type = ixgbe_media_type_fiber;
 		break;
-	case IXGBE_DEV_ID_82598AT_DUAL_PORT:
-		media_type = ixgbe_media_type_copper;
-		break;
 	default:
 		media_type = ixgbe_media_type_unknown;
 		break;
@@ -205,6 +198,122 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
 }
 
 /**
+ *  ixgbe_setup_fc_82598 - Configure flow control settings
+ *  @hw: pointer to hardware structure
+ *  @packetbuf_num: packet buffer number (0-7)
+ *
+ *  Configures the flow control settings based on SW configuration.  This
+ *  function is used for 802.3x flow control configuration only.
+ **/
+s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
+{
+	u32 frctl_reg;
+	u32 rmcs_reg;
+
+	if (packetbuf_num < 0 || packetbuf_num > 7) {
+		hw_dbg(hw, "Invalid packet buffer number [%d], expected range is"
+		          " 0-7\n", packetbuf_num);
+	}
+
+	frctl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	frctl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
+
+	rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+	rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
+
+	/*
+	 * 10 gig parts do not have a word in the EEPROM to determine the
+	 * default flow control setting, so we explicitly set it to full.
+	 */
+	if (hw->fc.type == ixgbe_fc_default)
+		hw->fc.type = ixgbe_fc_full;
+
+	/*
+	 * We want to save off the original Flow Control configuration just in
+	 * case we get disconnected and then reconnected into a different hub
+	 * or switch with different Flow Control capabilities.
+	 */
+	hw->fc.original_type = hw->fc.type;
+
+	/*
+	 * The possible values of the "flow_control" parameter are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames but not
+	 *    send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but we do not
+	 *    support receiving pause frames)
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.type) {
+	case ixgbe_fc_none:
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled,
+		 * and Tx Flow control is disabled.
+		 */
+		frctl_reg |= IXGBE_FCTRL_RFCE;
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is disabled,
+		 * by a software over-ride.
+		 */
+		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+		break;
+	case ixgbe_fc_full:
+		/*
+		 * Flow control (both Rx and Tx) is enabled by a software
+		 * over-ride.
+		 */
+		frctl_reg |= IXGBE_FCTRL_RFCE;
+		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+		break;
+	default:
+		/* We should never get here.  The value should be 0-3. */
+		hw_dbg(hw, "Flow control param set incorrectly\n");
+		break;
+	}
+
+	/* Enable 802.3x based flow control settings. */
+	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg);
+	IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
+
+	/*
+	 * Check for invalid software configuration, zeros are completely
+	 * invalid for all parameters used past this point, and if we enable
+	 * flow control with zero water marks, we blast flow control packets.
+	 */
+	if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
+		hw_dbg(hw, "Flow control structure initialized incorrectly\n");
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
+	}
+
+	/*
+	 * We need to set up the Receive Threshold high and low water
+	 * marks as well as (optionally) enabling the transmission of
+	 * XON frames.
+	 */
+	if (hw->fc.type & ixgbe_fc_tx_pause) {
+		if (hw->fc.send_xon) {
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
+			                (hw->fc.low_water | IXGBE_FCRTL_XONE));
+		} else {
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
+			                hw->fc.low_water);
+		}
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num),
+		                (hw->fc.high_water)|IXGBE_FCRTH_FCEN);
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_FCTTV(0), hw->fc.pause_time);
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+
+	return 0;
+}
+
+/**
  *  ixgbe_setup_mac_link_82598 - Configures MAC link settings
  *  @hw: pointer to hardware structure
  *
@@ -248,8 +357,7 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
 			}
 			if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
 				status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
-				hw_dbg(hw,
-				       "Autonegotiation did not complete.\n");
+				hw_dbg(hw, "Autonegotiation did not complete.\n");
 			}
 		}
 	}
@@ -259,8 +367,8 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
 	 * case we get disconnected and then reconnected into a different hub
 	 * or switch with different Flow Control capabilities.
 	 */
-	hw->fc.type = hw->fc.original_type;
-	ixgbe_setup_fc(hw, 0);
+	hw->fc.original_type = hw->fc.type;
+	ixgbe_setup_fc_82598(hw, 0);
 
 	/* Add delay to filter out noises during initial link setup */
 	msleep(50);
@@ -273,20 +381,35 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
  *  @hw: pointer to hardware structure
  *  @speed: pointer to link speed
  *  @link_up: true is link is up, false otherwise
+ *  @link_up_wait_to_complete: bool used to wait for link up or not
  *
  *  Reads the links register to determine if link is up and the current speed
  **/
-static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
-				      bool *link_up)
+static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+                                      ixgbe_link_speed *speed, bool *link_up,
+                                      bool link_up_wait_to_complete)
 {
 	u32 links_reg;
+	u32 i;
 
 	links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
-
-	if (links_reg & IXGBE_LINKS_UP)
-		*link_up = true;
-	else
-		*link_up = false;
+	if (link_up_wait_to_complete) {
+		for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+			if (links_reg & IXGBE_LINKS_UP) {
+				*link_up = true;
+				break;
+			} else {
+				*link_up = false;
+			}
+			msleep(100);
+			links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+		}
+	} else {
+		if (links_reg & IXGBE_LINKS_UP)
+			*link_up = true;
+		else
+			*link_up = false;
+	}
 
 	if (links_reg & IXGBE_LINKS_SPEED)
 		*speed = IXGBE_LINK_SPEED_10GB_FULL;
@@ -296,6 +419,7 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
 	return 0;
 }
 
+
 /**
  *  ixgbe_setup_mac_link_speed_82598 - Set MAC link speed
  *  @hw: pointer to hardware structure
@@ -306,18 +430,18 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
  *  Set the link speed in the AUTOC register and restarts link.
  **/
 static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
-					    u32 speed, bool autoneg,
-					    bool autoneg_wait_to_complete)
+                                            ixgbe_link_speed speed, bool autoneg,
+                                            bool autoneg_wait_to_complete)
 {
 	s32 status = 0;
 
 	/* If speed is 10G, then check for CX4 or XAUI. */
 	if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
-	    (!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4)))
+	    (!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4))) {
 		hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN;
-	else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg))
+	} else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg)) {
 		hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
-	else if (autoneg) {
+	} else if (autoneg) {
 		/* BX mode - Autonegotiate 1G */
 		if (!(hw->mac.link_attach_type & IXGBE_AUTOC_1G_PMA_PMD))
 			hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_AN;
@@ -336,7 +460,7 @@ static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
 		 * ixgbe_hw This will write the AUTOC register based on the new
 		 * stored values
 		 */
-		hw->mac.ops.setup_link(hw);
+		ixgbe_setup_mac_link_82598(hw);
 	}
 
 	return status;
@@ -354,18 +478,17 @@ static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
  **/
 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
 {
-	s32 status = 0;
+	s32 status;
 
 	/* Restart autonegotiation on PHY */
-	if (hw->phy.ops.setup_link)
-		status = hw->phy.ops.setup_link(hw);
+	status = hw->phy.ops.setup_link(hw);
 
-	/* Set MAC to KX/KX4 autoneg, which defaultis to Parallel detection */
+	/* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */
 	hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
 	hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
 
 	/* Set up MAC */
-	hw->mac.ops.setup_link(hw);
+	ixgbe_setup_mac_link_82598(hw);
 
 	return status;
 }
@@ -379,23 +502,23 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
  *
  *  Sets the link speed in the AUTOC register in the MAC and restarts link.
  **/
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
-					       bool autoneg,
-					       bool autoneg_wait_to_complete)
+static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+                                               ixgbe_link_speed speed,
+                                               bool autoneg,
+                                               bool autoneg_wait_to_complete)
 {
-	s32 status = 0;
+	s32 status;
 
 	/* Setup the PHY according to input speed */
-	if (hw->phy.ops.setup_link_speed)
-		status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
-						autoneg_wait_to_complete);
+	status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+	                                      autoneg_wait_to_complete);
 
 	/* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */
 	hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
 	hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
 
 	/* Set up MAC */
-	hw->mac.ops.setup_link(hw);
+	ixgbe_setup_mac_link_82598(hw);
 
 	return status;
 }
@@ -404,7 +527,7 @@ static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
  *  ixgbe_reset_hw_82598 - Performs hardware reset
  *  @hw: pointer to hardware structure
  *
- *  Resets the hardware by reseting the transmit and receive units, masks and
+ *  Resets the hardware by resetting the transmit and receive units, masks and
  *  clears all interrupts, performing a PHY reset, and performing a link (MAC)
  *  reset.
  **/
@@ -418,35 +541,44 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
 	u8  analog_val;
 
 	/* Call adapter stop to disable tx/rx and clear interrupts */
-	ixgbe_stop_adapter(hw);
+	hw->mac.ops.stop_adapter(hw);
 
 	/*
-	 * Power up the Atlas TX lanes if they are currently powered down.
-	 * Atlas TX lanes are powered down for MAC loopback tests, but
+	 * Power up the Atlas Tx lanes if they are currently powered down.
+	 * Atlas Tx lanes are powered down for MAC loopback tests, but
 	 * they are not automatically restored on reset.
 	 */
-	ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
+	hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
 	if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
-		/* Enable TX Atlas so packets can be transmitted again */
-		ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
+		/* Enable Tx Atlas so packets can be transmitted again */
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+		                             &analog_val);
 		analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
-		ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, analog_val);
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+		                              analog_val);
 
-		ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &analog_val);
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+		                             &analog_val);
 		analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
-		ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, analog_val);
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+		                              analog_val);
 
-		ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &analog_val);
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+		                             &analog_val);
 		analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
-		ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, analog_val);
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+		                              analog_val);
 
-		ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &analog_val);
+		hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+		                             &analog_val);
 		analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
-		ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, analog_val);
+		hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+		                              analog_val);
 	}
 
 	/* Reset PHY */
-	ixgbe_reset_phy(hw);
+	if (hw->phy.reset_disable == false)
+		hw->phy.ops.reset(hw);
 
 	/*
 	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
@@ -499,29 +631,311 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
 		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
 	} else {
 		hw->mac.link_attach_type =
-					 (autoc & IXGBE_AUTOC_LMS_ATTACH_TYPE);
+		                         (autoc & IXGBE_AUTOC_LMS_ATTACH_TYPE);
 		hw->mac.link_mode_select = (autoc & IXGBE_AUTOC_LMS_MASK);
 		hw->mac.link_settings_loaded = true;
 	}
 
 	/* Store the permanent mac address */
-	ixgbe_get_mac_addr(hw, hw->mac.perm_addr);
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
 
 	return status;
 }
 
+/**
+ *  ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to associate with a VMDq index
+ *  @vmdq: VMDq set index
+ **/
+s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 rar_high;
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+	rar_high &= ~IXGBE_RAH_VIND_MASK;
+	rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+	return 0;
+}
+
+/**
+ *  ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to associate with a VMDq index
+ *  @vmdq: VMDq clear index (not used in 82598, but elsewhere)
+ **/
+static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	if (rar < rar_entries) {
+		rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+		if (rar_high & IXGBE_RAH_VIND_MASK) {
+			rar_high &= ~IXGBE_RAH_VIND_MASK;
+			IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+		}
+	} else {
+		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_set_vfta_82598 - Set VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFTA
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ *  Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+                         bool vlan_on)
+{
+	u32 regindex;
+	u32 bitindex;
+	u32 bits;
+	u32 vftabyte;
+
+	if (vlan > 4095)
+		return IXGBE_ERR_PARAM;
+
+	/* Determine 32-bit word position in array */
+	regindex = (vlan >> 5) & 0x7F;   /* upper seven bits */
+
+	/* Determine the location of the (VMD) queue index */
+	vftabyte =  ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
+	bitindex = (vlan & 0x7) << 2;    /* lower 3 bits indicate nibble */
+
+	/* Set the nibble for VMD queue index */
+	bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex));
+	bits &= (~(0x0F << bitindex));
+	bits |= (vind << bitindex);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits);
+
+	/* Determine the location of the bit for this VLAN id */
+	bitindex = vlan & 0x1F;   /* lower five bits */
+
+	bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+	if (vlan_on)
+		/* Turn on this VLAN id */
+		bits |= (1 << bitindex);
+	else
+		/* Turn off this VLAN id */
+		bits &= ~(1 << bitindex);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_clear_vfta_82598 - Clear VLAN filter table
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
+{
+	u32 offset;
+	u32 vlanbyte;
+
+	for (offset = 0; offset < hw->mac.vft_size; offset++)
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+	for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
+		for (offset = 0; offset < hw->mac.vft_size; offset++)
+			IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
+			                0);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_blink_led_start_82598 - Blink LED based on index.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to blink
+ **/
+static s32 ixgbe_blink_led_start_82598(struct ixgbe_hw *hw, u32 index)
+{
+	ixgbe_link_speed speed = 0;
+	bool link_up = 0;
+	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	/*
+	 * Link must be up to auto-blink the LEDs on the 82598EB MAC;
+	 * force it if link is down.
+	 */
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+
+	if (!link_up) {
+		autoc_reg |= IXGBE_AUTOC_FLU;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+		msleep(10);
+	}
+
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg |= IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_blink_led_stop_82598 - Stop blinking LED based on index.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to stop blinking
+ **/
+static s32 ixgbe_blink_led_stop_82598(struct ixgbe_hw *hw, u32 index)
+{
+	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	autoc_reg &= ~IXGBE_AUTOC_FLU;
+	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg &= ~IXGBE_LED_BLINK(index);
+	led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: analog register to read
+ *  @val: read value
+ *
+ *  Performs read operation to Atlas analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+	u32  atlas_ctl;
+
+	IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
+	                IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(10);
+	atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
+	*val = (u8)atlas_ctl;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: atlas register to write
+ *  @val: value to write
+ *
+ *  Performs write operation to Atlas analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+	u32  atlas_ctl;
+
+	atlas_ctl = (reg << 8) | val;
+	IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(10);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current configuration.
+ **/
+s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
+{
+	s32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82598EB_CX4:
+	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+		break;
+	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+		break;
+	case IXGBE_DEV_ID_82598EB_XF_LR:
+		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+		break;
+
+	default:
+		physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+		break;
+	}
+
+	return physical_layer;
+}
+
 static struct ixgbe_mac_operations mac_ops_82598 = {
-	.reset			= &ixgbe_reset_hw_82598,
+	.init_hw		= &ixgbe_init_hw_generic,
+	.reset_hw		= &ixgbe_reset_hw_82598,
+	.start_hw		= &ixgbe_start_hw_generic,
+	.clear_hw_cntrs		= &ixgbe_clear_hw_cntrs_generic,
 	.get_media_type		= &ixgbe_get_media_type_82598,
+	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
+	.get_mac_addr		= &ixgbe_get_mac_addr_generic,
+	.stop_adapter		= &ixgbe_stop_adapter_generic,
+	.read_analog_reg8	= &ixgbe_read_analog_reg8_82598,
+	.write_analog_reg8	= &ixgbe_write_analog_reg8_82598,
 	.setup_link		= &ixgbe_setup_mac_link_82598,
-	.check_link		= &ixgbe_check_mac_link_82598,
 	.setup_link_speed	= &ixgbe_setup_mac_link_speed_82598,
-	.get_link_settings	= &ixgbe_get_link_settings_82598,
+	.check_link		= &ixgbe_check_mac_link_82598,
+	.get_link_capabilities	= &ixgbe_get_link_capabilities_82598,
+	.led_on			= &ixgbe_led_on_generic,
+	.led_off		= &ixgbe_led_off_generic,
+	.blink_led_start	= &ixgbe_blink_led_start_82598,
+	.blink_led_stop		= &ixgbe_blink_led_stop_82598,
+	.set_rar		= &ixgbe_set_rar_generic,
+	.clear_rar		= &ixgbe_clear_rar_generic,
+	.set_vmdq		= &ixgbe_set_vmdq_82598,
+	.clear_vmdq		= &ixgbe_clear_vmdq_82598,
+	.init_rx_addrs		= &ixgbe_init_rx_addrs_generic,
+	.update_uc_addr_list	= &ixgbe_update_uc_addr_list_generic,
+	.update_mc_addr_list	= &ixgbe_update_mc_addr_list_generic,
+	.enable_mc		= &ixgbe_enable_mc_generic,
+	.disable_mc		= &ixgbe_disable_mc_generic,
+	.clear_vfta		= &ixgbe_clear_vfta_82598,
+	.set_vfta		= &ixgbe_set_vfta_82598,
+	.setup_fc		= &ixgbe_setup_fc_82598,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
+	.init_params		= &ixgbe_init_eeprom_params_generic,
+	.read			= &ixgbe_read_eeprom_generic,
+	.validate_checksum	= &ixgbe_validate_eeprom_checksum_generic,
+	.update_checksum	= &ixgbe_update_eeprom_checksum_generic,
+};
+
+static struct ixgbe_phy_operations phy_ops_82598 = {
+	.identify		= &ixgbe_identify_phy_generic,
+	/* .identify_sfp	= &ixgbe_identify_sfp_module_generic, */
+	.reset			= &ixgbe_reset_phy_generic,
+	.read_reg		= &ixgbe_read_phy_reg_generic,
+	.write_reg		= &ixgbe_write_phy_reg_generic,
+	.setup_link		= &ixgbe_setup_phy_link_generic,
+	.setup_link_speed	= &ixgbe_setup_phy_link_speed_generic,
 };
 
 struct ixgbe_info ixgbe_82598_info = {
 	.mac			= ixgbe_mac_82598EB,
 	.get_invariants		= &ixgbe_get_invariants_82598,
 	.mac_ops		= &mac_ops_82598,
+	.eeprom_ops		= &eeprom_ops_82598,
+	.phy_ops		= &phy_ops_82598,
 };