summaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgbe/ixgbe_82599.c
diff options
context:
space:
mode:
authorPJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>2009-04-09 22:28:15 +0000
committerDavid S. Miller <davem@davemloft.net>2009-04-11 02:48:01 -0700
commit553b449784e27bb7244c41aa27397d29f213e5a3 (patch)
tree041c34e3d1524ffd530c3a196e7846370a8b5d5a /drivers/net/ixgbe/ixgbe_82599.c
parent04f165ef4f18444854865d44a3359618480060af (diff)
ixgbe: Remove unnecessary PHY reset, properly identify multispeed fiber modules
This patch does two things: 1) On 82599, the PHY is emedded in the MAC. On 82598, the SFP+ NIC has an external PHY. The reset in the SFP+ setup patch for 82598 is unnecessary on 82599, and adds extra dead time to device initialization. This removes that PHY reset for 82599 only. 2) On 82599, the SFP+ modules are multispeed fiber modules (10G/1G). We need to make sure to identify them properly for the remaining init sections to properly set them up. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_82599.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_82599.c24
1 files changed, 16 insertions, 8 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 9a999898500..72a0d27a19a 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -102,6 +102,9 @@ s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
ixgbe_init_mac_link_ops_82599(hw);
+
+ hw->phy.ops.reset = NULL;
+
ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
&data_offset);
@@ -716,19 +719,24 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
/* Call adapter stop to disable tx/rx and clear interrupts */
hw->mac.ops.stop_adapter(hw);
- /* Reset PHY */
- if (hw->phy.reset_disable == false) {
- /* PHY ops must be identified and initialized prior to reset */
+ /* PHY ops must be identified and initialized prior to reset */
- /* Init PHY and function pointers, perform SFP setup */
- status = hw->phy.ops.init(hw);
+ /* Init PHY and function pointers, perform SFP setup */
+ status = hw->phy.ops.init(hw);
- if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
- goto reset_hw_out;
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto reset_hw_out;
- hw->phy.ops.reset(hw);
+ /* Setup SFP module if there is one present. */
+ if (hw->phy.sfp_setup_needed) {
+ status = hw->mac.ops.setup_sfp(hw);
+ hw->phy.sfp_setup_needed = false;
}
+ /* Reset PHY */
+ if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
+ hw->phy.ops.reset(hw);
+
/*
* Prevent the PCI-E bus from from hanging by disabling PCI-E master
* access and verify no pending requests before reset