diff options
| author | PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> | 2009-04-09 22:28:15 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2009-04-11 02:48:01 -0700 |
| commit | 553b449784e27bb7244c41aa27397d29f213e5a3 (patch) | |
| tree | 041c34e3d1524ffd530c3a196e7846370a8b5d5a /drivers/net/ixgbe/ixgbe_82599.c | |
| parent | 04f165ef4f18444854865d44a3359618480060af (diff) | |
ixgbe: Remove unnecessary PHY reset, properly identify multispeed fiber modules
This patch does two things:
1) On 82599, the PHY is emedded in the MAC. On 82598, the SFP+ NIC has an external PHY. The reset in the SFP+ setup patch for 82598 is unnecessary on 82599, and adds extra dead time to device initialization. This removes that PHY reset for 82599 only.
2) On 82599, the SFP+ modules are multispeed fiber modules (10G/1G). We need to make sure to identify them properly for the remaining init sections to properly set them up.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_82599.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 24 |
1 files changed, 16 insertions, 8 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 9a999898500..72a0d27a19a 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -102,6 +102,9 @@ s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { ixgbe_init_mac_link_ops_82599(hw); + + hw->phy.ops.reset = NULL; + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, &data_offset); @@ -716,19 +719,24 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) /* Call adapter stop to disable tx/rx and clear interrupts */ hw->mac.ops.stop_adapter(hw); - /* Reset PHY */ - if (hw->phy.reset_disable == false) { - /* PHY ops must be identified and initialized prior to reset */ + /* PHY ops must be identified and initialized prior to reset */ - /* Init PHY and function pointers, perform SFP setup */ - status = hw->phy.ops.init(hw); + /* Init PHY and function pointers, perform SFP setup */ + status = hw->phy.ops.init(hw); - if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) - goto reset_hw_out; + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; - hw->phy.ops.reset(hw); + /* Setup SFP module if there is one present. */ + if (hw->phy.sfp_setup_needed) { + status = hw->mac.ops.setup_sfp(hw); + hw->phy.sfp_setup_needed = false; } + /* Reset PHY */ + if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL) + hw->phy.ops.reset(hw); + /* * Prevent the PCI-E bus from from hanging by disabling PCI-E master * access and verify no pending requests before reset |