ixgbe: add support for new format of PBA numbers

The new PBA format is stored as a string.  This patch allows the
driver to support both the old and new format.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 87 insertions, 7 deletions

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 56052570cac..cc11e422ce9 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -196,30 +196,110 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_read_pba_num_generic - Reads part number from EEPROM
+ *  ixgbe_read_pba_string_generic - Reads part number string from EEPROM
  *  @hw: pointer to hardware structure
- *  @pba_num: stores the part number from the EEPROM
+ *  @pba_num: stores the part number string from the EEPROM
+ *  @pba_num_size: part number string buffer length
  *
- *  Reads the part number from the EEPROM.
+ *  Reads the part number string from the EEPROM.
  **/
-s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num)
+s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
+                                  u32 pba_num_size)
 {
 	s32 ret_val;
 	u16 data;
+	u16 pba_ptr;
+	u16 offset;
+	u16 length;
+
+	if (pba_num == NULL) {
+		hw_dbg(hw, "PBA string buffer was null\n");
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
 
 	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
 	if (ret_val) {
 		hw_dbg(hw, "NVM Read Error\n");
 		return ret_val;
 	}
-	*pba_num = (u32)(data << 16);
 
-	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &data);
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr);
 	if (ret_val) {
 		hw_dbg(hw, "NVM Read Error\n");
 		return ret_val;
 	}
-	*pba_num |= data;
+
+	/*
+	 * if data is not ptr guard the PBA must be in legacy format which
+	 * means pba_ptr is actually our second data word for the PBA number
+	 * and we can decode it into an ascii string
+	 */
+	if (data != IXGBE_PBANUM_PTR_GUARD) {
+		hw_dbg(hw, "NVM PBA number is not stored as string\n");
+
+		/* we will need 11 characters to store the PBA */
+		if (pba_num_size < 11) {
+			hw_dbg(hw, "PBA string buffer too small\n");
+			return IXGBE_ERR_NO_SPACE;
+		}
+
+		/* extract hex string from data and pba_ptr */
+		pba_num[0] = (data >> 12) & 0xF;
+		pba_num[1] = (data >> 8) & 0xF;
+		pba_num[2] = (data >> 4) & 0xF;
+		pba_num[3] = data & 0xF;
+		pba_num[4] = (pba_ptr >> 12) & 0xF;
+		pba_num[5] = (pba_ptr >> 8) & 0xF;
+		pba_num[6] = '-';
+		pba_num[7] = 0;
+		pba_num[8] = (pba_ptr >> 4) & 0xF;
+		pba_num[9] = pba_ptr & 0xF;
+
+		/* put a null character on the end of our string */
+		pba_num[10] = '\0';
+
+		/* switch all the data but the '-' to hex char */
+		for (offset = 0; offset < 10; offset++) {
+			if (pba_num[offset] < 0xA)
+				pba_num[offset] += '0';
+			else if (pba_num[offset] < 0x10)
+				pba_num[offset] += 'A' - 0xA;
+		}
+
+		return 0;
+	}
+
+	ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length);
+	if (ret_val) {
+		hw_dbg(hw, "NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		hw_dbg(hw, "NVM PBA number section invalid length\n");
+		return IXGBE_ERR_PBA_SECTION;
+	}
+
+	/* check if pba_num buffer is big enough */
+	if (pba_num_size  < (((u32)length * 2) - 1)) {
+		hw_dbg(hw, "PBA string buffer too small\n");
+		return IXGBE_ERR_NO_SPACE;
+	}
+
+	/* trim pba length from start of string */
+	pba_ptr++;
+	length--;
+
+	for (offset = 0; offset < length; offset++) {
+		ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data);
+		if (ret_val) {
+			hw_dbg(hw, "NVM Read Error\n");
+			return ret_val;
+		}
+		pba_num[offset * 2] = (u8)(data >> 8);
+		pba_num[(offset * 2) + 1] = (u8)(data & 0xFF);
+	}
+	pba_num[offset * 2] = '\0';
 
 	return 0;
 }