diff options
author | Emil Tantilov <emil.s.tantilov@intel.com> | 2011-02-19 08:43:34 +0000 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-03-03 03:31:01 -0800 |
commit | 79d5892521144d455114e4820eb30fec802b9c39 (patch) | |
tree | 4d90c7a51b9b632ac8b84d1c6b37d15a9cadb06c /drivers/net/ixgbe | |
parent | 80960ab040dd6b3a82bfb2db9b1aaf5d6ccffbb7 (diff) |
ixgbe: Drop unused code for setting up unicast addresses
This change removes the unused code that was setting up the uc_addr_list.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ixgbe')
-rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 1 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 1 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_common.c | 99 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_common.h | 2 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 1 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_x540.c | 1 |
6 files changed, 0 insertions, 105 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index bff7011f919..a5b83b775b6 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -1198,7 +1198,6 @@ static struct ixgbe_mac_operations mac_ops_82598 = { .set_vmdq = &ixgbe_set_vmdq_82598, .clear_vmdq = &ixgbe_clear_vmdq_82598, .init_rx_addrs = &ixgbe_init_rx_addrs_generic, - .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic, .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, .enable_mc = &ixgbe_enable_mc_generic, .disable_mc = &ixgbe_disable_mc_generic, diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 126a06fa2a1..69d345b1ecf 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -2035,7 +2035,6 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .set_vmdq = &ixgbe_set_vmdq_generic, .clear_vmdq = &ixgbe_clear_vmdq_generic, .init_rx_addrs = &ixgbe_init_rx_addrs_generic, - .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic, .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, .enable_mc = &ixgbe_enable_mc_generic, .disable_mc = &ixgbe_disable_mc_generic, diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index b94634f4168..4fa195e88f3 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -47,7 +47,6 @@ static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); static void ixgbe_release_eeprom(struct ixgbe_hw *hw); static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); -static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq); static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num); /** @@ -1367,104 +1366,6 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) } /** - * ixgbe_add_uc_addr - Adds a secondary unicast address. - * @hw: pointer to hardware structure - * @addr: new address - * - * Adds it to unused receive address register or goes into promiscuous mode. - **/ -static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) -{ - u32 rar_entries = hw->mac.num_rar_entries; - u32 rar; - - hw_dbg(hw, " UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n", - addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); - - /* - * Place this address in the RAR if there is room, - * else put the controller into promiscuous mode - */ - if (hw->addr_ctrl.rar_used_count < rar_entries) { - rar = hw->addr_ctrl.rar_used_count; - hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV); - hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar); - hw->addr_ctrl.rar_used_count++; - } else { - hw->addr_ctrl.overflow_promisc++; - } - - hw_dbg(hw, "ixgbe_add_uc_addr Complete\n"); -} - -/** - * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses - * @hw: pointer to hardware structure - * @netdev: pointer to net device structure - * - * The given list replaces any existing list. Clears the secondary addrs from - * receive address registers. Uses unused receive address registers for the - * first secondary addresses, and falls back to promiscuous mode as needed. - * - * Drivers using secondary unicast addresses must set user_set_promisc when - * manually putting the device into promiscuous mode. - **/ -s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, - struct net_device *netdev) -{ - u32 i; - u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc; - u32 uc_addr_in_use; - u32 fctrl; - struct netdev_hw_addr *ha; - - /* - * Clear accounting of old secondary address list, - * don't count RAR[0] - */ - uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1; - hw->addr_ctrl.rar_used_count -= uc_addr_in_use; - hw->addr_ctrl.overflow_promisc = 0; - - /* Zero out the other receive addresses */ - hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use + 1); - for (i = 0; i < uc_addr_in_use; i++) { - IXGBE_WRITE_REG(hw, IXGBE_RAL(1+i), 0); - IXGBE_WRITE_REG(hw, IXGBE_RAH(1+i), 0); - } - - /* Add the new addresses */ - netdev_for_each_uc_addr(ha, netdev) { - hw_dbg(hw, " Adding the secondary addresses:\n"); - ixgbe_add_uc_addr(hw, ha->addr, 0); - } - - if (hw->addr_ctrl.overflow_promisc) { - /* enable promisc if not already in overflow or set by user */ - if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { - hw_dbg(hw, " Entering address overflow promisc mode\n"); - fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); - fctrl |= IXGBE_FCTRL_UPE; - IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); - hw->addr_ctrl.uc_set_promisc = true; - } - } else { - /* only disable if set by overflow, not by user */ - if ((old_promisc_setting && hw->addr_ctrl.uc_set_promisc) && - !(hw->addr_ctrl.user_set_promisc)) { - hw_dbg(hw, " Leaving address overflow promisc mode\n"); - fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); - fctrl &= ~IXGBE_FCTRL_UPE; - IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); - hw->addr_ctrl.uc_set_promisc = false; - } - } - - hw_dbg(hw, "ixgbe_update_uc_addr_list_generic Complete\n"); - return 0; -} - -/** * ixgbe_mta_vector - Determines bit-vector in multicast table to set * @hw: pointer to hardware structure * @mc_addr: the multicast address diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index 90cceb4a631..90ac6095c1c 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -63,8 +63,6 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index); s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw); s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, struct net_device *netdev); -s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, - struct net_device *netdev); s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw); s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw); s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval); diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index f6d0d4d98dd..8e0a2130f42 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -2517,7 +2517,6 @@ struct ixgbe_mac_operations { s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32); s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32); s32 (*init_rx_addrs)(struct ixgbe_hw *); - s32 (*update_uc_addr_list)(struct ixgbe_hw *, struct net_device *); s32 (*update_mc_addr_list)(struct ixgbe_hw *, struct net_device *); s32 (*enable_mc)(struct ixgbe_hw *); s32 (*disable_mc)(struct ixgbe_hw *); diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c index 3229398630f..fbc0a8bab39 100644 --- a/drivers/net/ixgbe/ixgbe_x540.c +++ b/drivers/net/ixgbe/ixgbe_x540.c @@ -686,7 +686,6 @@ static struct ixgbe_mac_operations mac_ops_X540 = { .set_vmdq = &ixgbe_set_vmdq_generic, .clear_vmdq = &ixgbe_clear_vmdq_generic, .init_rx_addrs = &ixgbe_init_rx_addrs_generic, - .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic, .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, .enable_mc = &ixgbe_enable_mc_generic, .disable_mc = &ixgbe_disable_mc_generic, |