Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

7 files changed, 452 insertions, 154 deletions

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index dd688d45e9c..385be601666 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -267,7 +267,8 @@ struct ixgbe_adapter {
 	enum ixgbe_fc_mode last_lfc_mode;
 
 	/* Interrupt Throttle Rate */
-	u32 itr_setting;
+	u32 rx_itr_setting;
+	u32 tx_itr_setting;
 	u16 eitr_low;
 	u16 eitr_high;
 
@@ -351,7 +352,8 @@ struct ixgbe_adapter {
 	struct ixgbe_hw_stats stats;
 
 	/* Interrupt Throttle Rate */
-	u32 eitr_param;
+	u32 rx_eitr_param;
+	u32 tx_eitr_param;
 
 	unsigned long state;
 	u64 tx_busy;
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 56b12f3192f..e2d5343f127 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -425,7 +425,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 #endif /* CONFIG_DCB */
 	default:
 		hw_dbg(hw, "Flow control param set incorrectly\n");
-		ret_val = -IXGBE_ERR_CONFIG;
+		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
 		break;
 	}
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 2ec58dcdb82..34b04924c8a 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -330,6 +330,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 
 	switch (hw->device_id) {
 	case IXGBE_DEV_ID_82599_KX4:
+	case IXGBE_DEV_ID_82599_KX4_MEZZ:
+	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
 	case IXGBE_DEV_ID_82599_XAUI_LOM:
 		/* Default device ID is mezzanine card KX/KX4 */
 		media_type = ixgbe_media_type_backplane;
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 6621e172df3..40ff120a9ad 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1355,9 +1355,7 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
 /**
  *  ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
  *  @hw: pointer to hardware structure
- *  @addr_list: the list of new addresses
- *  @addr_count: number of addresses
- *  @next: iterator function to walk the address list
+ *  @uc_list: the list of new addresses
  *
  *  The given list replaces any existing list.  Clears the secondary addrs from
  *  receive address registers.  Uses unused receive address registers for the
@@ -1663,7 +1661,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 #endif /* CONFIG_DCB */
 	default:
 		hw_dbg(hw, "Flow control param set incorrectly\n");
-		ret_val = -IXGBE_ERR_CONFIG;
+		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
 		break;
 	}
@@ -1734,75 +1732,140 @@ s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 	s32 ret_val = 0;
 	ixgbe_link_speed speed;
 	u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+	u32 links2, anlp1_reg, autoc_reg, links;
 	bool link_up;
 
 	/*
 	 * AN should have completed when the cable was plugged in.
 	 * Look for reasons to bail out.  Bail out if:
 	 * - FC autoneg is disabled, or if
-	 * - we don't have multispeed fiber, or if
-	 * - we're not running at 1G, or if
-	 * - link is not up, or if
-	 * - link is up but AN did not complete, or if
-	 * - link is up and AN completed but timed out
+	 * - link is not up.
 	 *
-	 * Since we're being called from an LSC, link is already know to be up.
+	 * Since we're being called from an LSC, link is already known to be up.
 	 * So use link_up_wait_to_complete=false.
 	 */
 	hw->mac.ops.check_link(hw, &speed, &link_up, false);
-	linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
-
-	if (hw->fc.disable_fc_autoneg ||
-	    !hw->phy.multispeed_fiber ||
-	    (speed != IXGBE_LINK_SPEED_1GB_FULL) ||
-	    !link_up ||
-	    ((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
-	    ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+
+	if (hw->fc.disable_fc_autoneg || (!link_up)) {
 		hw->fc.fc_was_autonegged = false;
 		hw->fc.current_mode = hw->fc.requested_mode;
-		hw_dbg(hw, "Autoneg FC was skipped.\n");
 		goto out;
 	}
 
 	/*
+	 * On backplane, bail out if
+	 * - backplane autoneg was not completed, or if
+	 * - link partner is not AN enabled
+	 */
+	if (hw->phy.media_type == ixgbe_media_type_backplane) {
+		links = IXGBE_READ_REG(hw, IXGBE_LINKS);
+		links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
+		if (((links & IXGBE_LINKS_KX_AN_COMP) == 0) ||
+		    ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0)) {
+			hw->fc.fc_was_autonegged = false;
+			hw->fc.current_mode = hw->fc.requested_mode;
+			goto out;
+		}
+	}
+
+	/*
+	 * On multispeed fiber at 1g, bail out if
+	 * - link is up but AN did not complete, or if
+	 * - link is up and AN completed but timed out
+	 */
+	if (hw->phy.multispeed_fiber && (speed == IXGBE_LINK_SPEED_1GB_FULL)) {
+		linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+		if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+		    ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+			hw->fc.fc_was_autonegged = false;
+			hw->fc.current_mode = hw->fc.requested_mode;
+			goto out;
+		}
+	}
+
+	/*
 	 * Read the AN advertisement and LP ability registers and resolve
 	 * local flow control settings accordingly
 	 */
-	pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
-	pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
-	if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-		(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) {
+	if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+	    (hw->phy.media_type != ixgbe_media_type_backplane)) {
+		pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+		pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+		if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+		    (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) {
+			/*
+			 * Now we need to check if the user selected Rx ONLY
+			 * of pause frames.  In this case, we had to advertise
+			 * FULL flow control because we could not advertise RX
+			 * ONLY. Hence, we must now check to see if we need to
+			 * turn OFF the TRANSMISSION of PAUSE frames.
+			 */
+			if (hw->fc.requested_mode == ixgbe_fc_full) {
+				hw->fc.current_mode = ixgbe_fc_full;
+				hw_dbg(hw, "Flow Control = FULL.\n");
+			} else {
+				hw->fc.current_mode = ixgbe_fc_rx_pause;
+				hw_dbg(hw, "Flow Control=RX PAUSE only\n");
+			}
+		} else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+			   (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
+			   (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+			   (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
+			hw->fc.current_mode = ixgbe_fc_tx_pause;
+			hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+		} else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+			   (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
+			   !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+			   (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
+			hw->fc.current_mode = ixgbe_fc_rx_pause;
+			hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+		} else {
+			hw->fc.current_mode = ixgbe_fc_none;
+			hw_dbg(hw, "Flow Control = NONE.\n");
+		}
+	}
+
+	if (hw->phy.media_type == ixgbe_media_type_backplane) {
 		/*
-		 * Now we need to check if the user selected Rx ONLY
-		 * of pause frames.  In this case, we had to advertise
-		 * FULL flow control because we could not advertise RX
-		 * ONLY. Hence, we must now check to see if we need to
-		 * turn OFF the TRANSMISSION of PAUSE frames.
+		 * Read the 10g AN autoc and LP ability registers and resolve
+		 * local flow control settings accordingly
 		 */
-		if (hw->fc.requested_mode == ixgbe_fc_full) {
-			hw->fc.current_mode = ixgbe_fc_full;
-			hw_dbg(hw, "Flow Control = FULL.\n");
-		} else {
+		autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+		anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+
+		if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+		    (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE)) {
+			/*
+			 * Now we need to check if the user selected Rx ONLY
+			 * of pause frames.  In this case, we had to advertise
+			 * FULL flow control because we could not advertise RX
+			 * ONLY. Hence, we must now check to see if we need to
+			 * turn OFF the TRANSMISSION of PAUSE frames.
+			 */
+			if (hw->fc.requested_mode == ixgbe_fc_full) {
+				hw->fc.current_mode = ixgbe_fc_full;
+				hw_dbg(hw, "Flow Control = FULL.\n");
+			} else {
+				hw->fc.current_mode = ixgbe_fc_rx_pause;
+				hw_dbg(hw, "Flow Control=RX PAUSE only\n");
+			}
+		} else if (!(autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+			   (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
+			   (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
+			   (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
+			hw->fc.current_mode = ixgbe_fc_tx_pause;
+			hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+		} else if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+			   (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
+			   !(anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
+			   (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
 			hw->fc.current_mode = ixgbe_fc_rx_pause;
 			hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+		} else {
+			hw->fc.current_mode = ixgbe_fc_none;
+			hw_dbg(hw, "Flow Control = NONE.\n");
 		}
-	} else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-		   (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
-		   (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-		   (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
-		hw->fc.current_mode = ixgbe_fc_tx_pause;
-		hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
-	} else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-		   (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
-		   !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-		   (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
-		hw->fc.current_mode = ixgbe_fc_rx_pause;
-		hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
-	} else {
-		hw->fc.current_mode = ixgbe_fc_none;
-		hw_dbg(hw, "Flow Control = NONE.\n");
 	}
-
 	/* Record that current_mode is the result of a successful autoneg */
 	hw->fc.fc_was_autonegged = true;
 
@@ -1919,7 +1982,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 #endif /* CONFIG_DCB */
 	default:
 		hw_dbg(hw, "Flow control param set incorrectly\n");
-		ret_val = -IXGBE_ERR_CONFIG;
+		ret_val = IXGBE_ERR_CONFIG;
 		goto out;
 		break;
 	}
@@ -1927,9 +1990,6 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 	IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
 	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
 
-	/* Enable and restart autoneg to inform the link partner */
-	reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART;
-
 	/* Disable AN timeout */
 	if (hw->fc.strict_ieee)
 		reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
@@ -1937,6 +1997,70 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 	IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
 	hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
 
+	/*
+	 * Set up the 10G flow control advertisement registers so the HW
+	 * can do fc autoneg once the cable is plugged in.  If we end up
+	 * using 1g instead, this is harmless.
+	 */
+	reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	/*
+	 * The possible values of fc.requested_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *    we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.requested_mode) {
+	case ixgbe_fc_none:
+		/* Flow control completely disabled by software override. */
+		reg &= ~(IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+		reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		reg |= (IXGBE_AUTOC_ASM_PAUSE);
+		reg &= ~(IXGBE_AUTOC_SYM_PAUSE);
+		break;
+	case ixgbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+		break;
+#ifdef CONFIG_DCB
+	case ixgbe_fc_pfc:
+		goto out;
+		break;
+#endif /* CONFIG_DCB */
+	default:
+		hw_dbg(hw, "Flow control param set incorrectly\n");
+		ret_val = IXGBE_ERR_CONFIG;
+		goto out;
+		break;
+	}
+	/*
+	 * AUTOC restart handles negotiation of 1G and 10G. There is
+	 * no need to set the PCS1GCTL register.
+	 */
+	reg |= IXGBE_AUTOC_AN_RESTART;
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg);
+	hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg);
+
 out:
 	return ret_val;
 }
@@ -2000,7 +2124,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 
 	while (timeout) {
 		if (ixgbe_get_eeprom_semaphore(hw))
-			return -IXGBE_ERR_SWFW_SYNC;
+			return IXGBE_ERR_SWFW_SYNC;
 
 		gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
 		if (!(gssr & (fwmask | swmask)))
@@ -2017,7 +2141,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 
 	if (!timeout) {
 		hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n");
-		return -IXGBE_ERR_SWFW_SYNC;
+		return IXGBE_ERR_SWFW_SYNC;
 	}
 
 	gssr |= swmask;
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 026e94a9984..856c18c207f 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -53,6 +53,10 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
 	{"tx_packets", IXGBE_STAT(net_stats.tx_packets)},
 	{"rx_bytes", IXGBE_STAT(net_stats.rx_bytes)},
 	{"tx_bytes", IXGBE_STAT(net_stats.tx_bytes)},
+	{"rx_pkts_nic", IXGBE_STAT(stats.gprc)},
+	{"tx_pkts_nic", IXGBE_STAT(stats.gptc)},
+	{"rx_bytes_nic", IXGBE_STAT(stats.gorc)},
+	{"tx_bytes_nic", IXGBE_STAT(stats.gotc)},
 	{"lsc_int", IXGBE_STAT(lsc_int)},
 	{"tx_busy", IXGBE_STAT(tx_busy)},
 	{"non_eop_descs", IXGBE_STAT(non_eop_descs)},
@@ -794,7 +798,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_ring *temp_tx_ring, *temp_rx_ring;
-	int i, err;
+	int i, err = 0;
 	u32 new_rx_count, new_tx_count;
 	bool need_update = false;
 
@@ -818,6 +822,16 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 	while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
 		msleep(1);
 
+	if (!netif_running(adapter->netdev)) {
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			adapter->tx_ring[i].count = new_tx_count;
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			adapter->rx_ring[i].count = new_rx_count;
+		adapter->tx_ring_count = new_tx_count;
+		adapter->rx_ring_count = new_rx_count;
+		goto err_setup;
+	}
+
 	temp_tx_ring = kcalloc(adapter->num_tx_queues,
 	                       sizeof(struct ixgbe_ring), GFP_KERNEL);
 	if (!temp_tx_ring) {
@@ -875,8 +889,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 
 	/* if rings need to be updated, here's the place to do it in one shot */
 	if (need_update) {
-		if (netif_running(netdev))
-			ixgbe_down(adapter);
+		ixgbe_down(adapter);
 
 		/* tx */
 		if (new_tx_count != adapter->tx_ring_count) {
@@ -893,13 +906,8 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 			temp_rx_ring = NULL;
 			adapter->rx_ring_count = new_rx_count;
 		}
-	}
-
-	/* success! */
-	err = 0;
-	if (netif_running(netdev))
 		ixgbe_up(adapter);
-
+	}
 err_setup:
 	clear_bit(__IXGBE_RESETTING, &adapter->state);
 	return err;
@@ -1929,7 +1937,7 @@ static int ixgbe_get_coalesce(struct net_device *netdev,
 	ec->tx_max_coalesced_frames_irq = adapter->tx_ring[0].work_limit;
 
 	/* only valid if in constant ITR mode */
-	switch (adapter->itr_setting) {
+	switch (adapter->rx_itr_setting) {
 	case 0:
 		/* throttling disabled */
 		ec->rx_coalesce_usecs = 0;
@@ -1940,9 +1948,25 @@ static int ixgbe_get_coalesce(struct net_device *netdev,
 		break;
 	default:
 		/* fixed interrupt rate mode */
-		ec->rx_coalesce_usecs = 1000000/adapter->eitr_param;
+		ec->rx_coalesce_usecs = 1000000/adapter->rx_eitr_param;
+		break;
+	}
+
+	/* only valid if in constant ITR mode */
+	switch (adapter->tx_itr_setting) {
+	case 0:
+		/* throttling disabled */
+		ec->tx_coalesce_usecs = 0;
+		break;
+	case 1:
+		/* dynamic ITR mode */
+		ec->tx_coalesce_usecs = 1;
+		break;
+	default:
+		ec->tx_coalesce_usecs = 1000000/adapter->tx_eitr_param;
 		break;
 	}
+
 	return 0;
 }
 
@@ -1953,6 +1977,14 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 	struct ixgbe_q_vector *q_vector;
 	int i;
 
+	/*
+	 * don't accept tx specific changes if we've got mixed RxTx vectors
+	 * test and jump out here if needed before changing the rx numbers
+	 */
+	if ((1000000/ec->tx_coalesce_usecs) != adapter->tx_eitr_param &&
+	    adapter->q_vector[0]->txr_count && adapter->q_vector[0]->rxr_count)
+		return -EINVAL;
+
 	if (ec->tx_max_coalesced_frames_irq)
 		adapter->tx_ring[0].work_limit = ec->tx_max_coalesced_frames_irq;
 
@@ -1963,26 +1995,49 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 			return -EINVAL;
 
 		/* store the value in ints/second */
-		adapter->eitr_param = 1000000/ec->rx_coalesce_usecs;
+		adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs;
 
 		/* static value of interrupt rate */
-		adapter->itr_setting = adapter->eitr_param;
+		adapter->rx_itr_setting = adapter->rx_eitr_param;
 		/* clear the lower bit as its used for dynamic state */
-		adapter->itr_setting &= ~1;
+		adapter->rx_itr_setting &= ~1;
 	} else if (ec->rx_coalesce_usecs == 1) {
 		/* 1 means dynamic mode */
-		adapter->eitr_param = 20000;
-		adapter->itr_setting = 1;
+		adapter->rx_eitr_param = 20000;
+		adapter->rx_itr_setting = 1;
 	} else {
 		/*
 		 * any other value means disable eitr, which is best
 		 * served by setting the interrupt rate very high
 		 */
 		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
-			adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE;
+			adapter->rx_eitr_param = IXGBE_MAX_RSC_INT_RATE;
 		else
-			adapter->eitr_param = IXGBE_MAX_INT_RATE;
-		adapter->itr_setting = 0;
+			adapter->rx_eitr_param = IXGBE_MAX_INT_RATE;
+		adapter->rx_itr_setting = 0;
+	}
+
+	if (ec->tx_coalesce_usecs > 1) {
+		/* check the limits */
+		if ((1000000/ec->tx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
+		    (1000000/ec->tx_coalesce_usecs < IXGBE_MIN_INT_RATE))
+			return -EINVAL;
+
+		/* store the value in ints/second */
+		adapter->tx_eitr_param = 1000000/ec->tx_coalesce_usecs;
+
+		/* static value of interrupt rate */
+		adapter->tx_itr_setting = adapter->tx_eitr_param;
+
+		/* clear the lower bit as its used for dynamic state */
+		adapter->tx_itr_setting &= ~1;
+	} else if (ec->tx_coalesce_usecs == 1) {
+		/* 1 means dynamic mode */
+		adapter->tx_eitr_param = 10000;
+		adapter->tx_itr_setting = 1;
+	} else {
+		adapter->tx_eitr_param = IXGBE_MAX_INT_RATE;
+		adapter->tx_itr_setting = 0;
 	}
 
 	/* MSI/MSIx Interrupt Mode */
@@ -1992,17 +2047,17 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 		for (i = 0; i < num_vectors; i++) {
 			q_vector = adapter->q_vector[i];
 			if (q_vector->txr_count && !q_vector->rxr_count)
-				/* tx vector gets half the rate */
-				q_vector->eitr = (adapter->eitr_param >> 1);
+				/* tx only */
+				q_vector->eitr = adapter->tx_eitr_param;
 			else
 				/* rx only or mixed */
-				q_vector->eitr = adapter->eitr_param;
+				q_vector->eitr = adapter->rx_eitr_param;
 			ixgbe_write_eitr(q_vector);
 		}
 	/* Legacy Interrupt Mode */
 	} else {
 		q_vector = adapter->q_vector[0];
-		q_vector->eitr = adapter->eitr_param;
+		q_vector->eitr = adapter->rx_eitr_param;
 		ixgbe_write_eitr(q_vector);
 	}
 
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 59ad9590e70..a456578b857 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -44,12 +44,13 @@
 
 #include "ixgbe.h"
 #include "ixgbe_common.h"
+#include "ixgbe_dcb_82599.h"
 
 char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
                               "Intel(R) 10 Gigabit PCI Express Network Driver";
 
-#define DRV_VERSION "2.0.37-k2"
+#define DRV_VERSION "2.0.44-k2"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
 
@@ -97,8 +98,12 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ),
+	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE),
+	 board_82599 },
 
 	/* required last entry */
 	{0, }
@@ -222,6 +227,56 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter,
 	/* tx_buffer_info must be completely set up in the transmit path */
 }
 
+/**
+ * ixgbe_tx_is_paused - check if the tx ring is paused
+ * @adapter: the ixgbe adapter
+ * @tx_ring: the corresponding tx_ring
+ *
+ * If not in DCB mode, checks TFCS.TXOFF, otherwise, find out the
+ * corresponding TC of this tx_ring when checking TFCS.
+ *
+ * Returns : true if paused
+ */
+static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter,
+                                      struct ixgbe_ring *tx_ring)
+{
+	u32 txoff = IXGBE_TFCS_TXOFF;
+
+#ifdef CONFIG_IXGBE_DCB
+	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+		int tc;
+		int reg_idx = tx_ring->reg_idx;
+		int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
+
+		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+			tc = reg_idx >> 2;
+			txoff = IXGBE_TFCS_TXOFF0;
+		} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+			tc = 0;
+			txoff = IXGBE_TFCS_TXOFF;
+			if (dcb_i == 8) {
+				/* TC0, TC1 */
+				tc = reg_idx >> 5;
+				if (tc == 2) /* TC2, TC3 */
+					tc += (reg_idx - 64) >> 4;
+				else if (tc == 3) /* TC4, TC5, TC6, TC7 */
+					tc += 1 + ((reg_idx - 96) >> 3);
+			} else if (dcb_i == 4) {
+				/* TC0, TC1 */
+				tc = reg_idx >> 6;
+				if (tc == 1) {
+					tc += (reg_idx - 64) >> 5;
+					if (tc == 2) /* TC2, TC3 */
+						tc += (reg_idx - 96) >> 4;
+				}
+			}
+		}
+		txoff <<= tc;
+	}
+#endif
+	return IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & txoff;
+}
+
 static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
                                        struct ixgbe_ring *tx_ring,
                                        unsigned int eop)
@@ -233,7 +288,7 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
 	adapter->detect_tx_hung = false;
 	if (tx_ring->tx_buffer_info[eop].time_stamp &&
 	    time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) &&
-	    !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) {
+	    !ixgbe_tx_is_paused(adapter, tx_ring)) {
 		/* detected Tx unit hang */
 		union ixgbe_adv_tx_desc *tx_desc;
 		tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
@@ -408,19 +463,23 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
 	u32 txctrl;
 	int cpu = get_cpu();
 	int q = tx_ring - adapter->tx_ring;
+	struct ixgbe_hw *hw = &adapter->hw;
 
 	if (tx_ring->cpu != cpu) {
-		txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q));
 		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+			txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(q));
 			txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
 			txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+			txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(q), txctrl);
 		} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+			txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(q));
 			txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599;
 			txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
-			           IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+			          IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+			txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(q), txctrl);
 		}
-		txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl);
 		tx_ring->cpu = cpu;
 	}
 	put_cpu();
@@ -926,12 +985,12 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 			                      r_idx + 1);
 		}
 
-		/* if this is a tx only vector halve the interrupt rate */
 		if (q_vector->txr_count && !q_vector->rxr_count)
-			q_vector->eitr = (adapter->eitr_param >> 1);
+			/* tx only */
+			q_vector->eitr = adapter->tx_eitr_param;
 		else if (q_vector->rxr_count)
-			/* rx only */
-			q_vector->eitr = adapter->eitr_param;
+			/* rx or mixed */
+			q_vector->eitr = adapter->rx_eitr_param;
 
 		ixgbe_write_eitr(q_vector);
 	}
@@ -1359,7 +1418,7 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
 	/* If all Rx work done, exit the polling mode */
 	if (work_done < budget) {
 		napi_complete(napi);
-		if (adapter->itr_setting & 1)
+		if (adapter->rx_itr_setting & 1)
 			ixgbe_set_itr_msix(q_vector);
 		if (!test_bit(__IXGBE_DOWN, &adapter->state))
 			ixgbe_irq_enable_queues(adapter,
@@ -1420,7 +1479,7 @@ static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
 	/* If all Rx work done, exit the polling mode */
 	if (work_done < budget) {
 		napi_complete(napi);
-		if (adapter->itr_setting & 1)
+		if (adapter->rx_itr_setting & 1)
 			ixgbe_set_itr_msix(q_vector);
 		if (!test_bit(__IXGBE_DOWN, &adapter->state))
 			ixgbe_irq_enable_queues(adapter,
@@ -1458,10 +1517,10 @@ static int ixgbe_clean_txonly(struct napi_struct *napi, int budget)
 	if (!ixgbe_clean_tx_irq(q_vector, tx_ring))
 		work_done = budget;
 
-	/* If all Rx work done, exit the polling mode */
+	/* If all Tx work done, exit the polling mode */
 	if (work_done < budget) {
 		napi_complete(napi);
-		if (adapter->itr_setting & 1)
+		if (adapter->tx_itr_setting & 1)
 			ixgbe_set_itr_msix(q_vector);
 		if (!test_bit(__IXGBE_DOWN, &adapter->state))
 			ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));
@@ -1848,7 +1907,7 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 
 	IXGBE_WRITE_REG(hw, IXGBE_EITR(0),
-	                EITR_INTS_PER_SEC_TO_REG(adapter->eitr_param));
+	                EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr_param));
 
 	ixgbe_set_ivar(adapter, 0, 0, 0);
 	ixgbe_set_ivar(adapter, 1, 0, 0);
@@ -1885,18 +1944,49 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0);
 		adapter->tx_ring[i].head = IXGBE_TDH(j);
 		adapter->tx_ring[i].tail = IXGBE_TDT(j);
-		/* Disable Tx Head Writeback RO bit, since this hoses
+		/*
+		 * Disable Tx Head Writeback RO bit, since this hoses
 		 * bookkeeping if things aren't delivered in order.
 		 */
-		txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j));
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
+			txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j));
+			break;
+		case ixgbe_mac_82599EB:
+		default:
+			txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(j));
+			break;
+		}
 		txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl);
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl);
+			break;
+		case ixgbe_mac_82599EB:
+		default:
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(j), txctrl);
+			break;
+		}
 	}
+
 	if (hw->mac.type == ixgbe_mac_82599EB) {
+		u32 rttdcs;
+
+		/* disable the arbiter while setting MTQC */
+		rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+		rttdcs |= IXGBE_RTTDCS_ARBDIS;
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
+
 		/* We enable 8 traffic classes, DCB only */
 		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
 			IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA |
 			                IXGBE_MTQC_8TC_8TQ));
+		else
+			IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB);
+
+		/* re-eable the arbiter */
+		rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
+		IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
 	}
 }
 
@@ -1970,6 +2060,50 @@ static u32 ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
 }
 
 /**
+ * ixgbe_configure_rscctl - enable RSC for the indicated ring
+ * @adapter:    address of board private structure
+ * @index:      index of ring to set
+ * @rx_buf_len: rx buffer length
+ **/
+static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, int index,
+                                   int rx_buf_len)
+{
+	struct ixgbe_ring *rx_ring;
+	struct ixgbe_hw *hw = &adapter->hw;
+	int j;
+	u32 rscctrl;
+
+	rx_ring = &adapter->rx_ring[index];
+	j = rx_ring->reg_idx;
+	rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
+	rscctrl |= IXGBE_RSCCTL_RSCEN;
+	/*
+	 * we must limit the number of descriptors so that the
+	 * total size of max desc * buf_len is not greater
+	 * than 65535
+	 */
+	if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
+#if (MAX_SKB_FRAGS > 16)
+		rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+#elif (MAX_SKB_FRAGS > 8)
+		rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+#elif (MAX_SKB_FRAGS > 4)
+		rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+#else
+		rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
+#endif
+	} else {
+		if (rx_buf_len < IXGBE_RXBUFFER_4096)
+			rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+		else if (rx_buf_len < IXGBE_RXBUFFER_8192)
+			rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+		else
+			rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
+}
+
+/**
  * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
  * @adapter: board private structure
  *
@@ -1990,7 +2124,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 	u32 fctrl, hlreg0;
 	u32 reta = 0, mrqc = 0;
 	u32 rdrxctl;
-	u32 rscctrl;
 	int rx_buf_len;
 
 	/* Decide whether to use packet split mode or not */
@@ -2148,36 +2281,9 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 
 	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
 		/* Enable 82599 HW-RSC */
-		for (i = 0; i < adapter->num_rx_queues; i++) {
-			rx_ring = &adapter->rx_ring[i];
-			j = rx_ring->reg_idx;
-			rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
-			rscctrl |= IXGBE_RSCCTL_RSCEN;
-			/*
-			 * we must limit the number of descriptors so that the
-			 * total size of max desc * buf_len is not greater
-			 * than 65535
-			 */
-			if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
-#if (MAX_SKB_FRAGS > 16)
-				rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
-#elif (MAX_SKB_FRAGS > 8)
-				rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
-#elif (MAX_SKB_FRAGS > 4)
-				rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
-#else
-				rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
-#endif
-			} else {
-				if (rx_buf_len < IXGBE_RXBUFFER_4096)
-					rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
-				else if (rx_buf_len < IXGBE_RXBUFFER_8192)
-					rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
-				else
-					rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
-			}
-			IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
-		}
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			ixgbe_configure_rscctl(adapter, i, rx_buf_len);
+
 		/* Disable RSC for ACK packets */
 		IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
 		   (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU)));
@@ -2434,7 +2540,10 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter)
 	ixgbe_restore_vlan(adapter);
 #ifdef CONFIG_IXGBE_DCB
 	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-		netif_set_gso_max_size(netdev, 32768);
+		if (hw->mac.type == ixgbe_mac_82598EB)
+			netif_set_gso_max_size(netdev, 32768);
+		else
+			netif_set_gso_max_size(netdev, 65536);
 		ixgbe_configure_dcb(adapter);
 	} else {
 		netif_set_gso_max_size(netdev, 65536);
@@ -2926,6 +3035,8 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 
 	ixgbe_napi_disable_all(adapter);
 
+	clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
+	del_timer_sync(&adapter->sfp_timer);
 	del_timer_sync(&adapter->watchdog_timer);
 	cancel_work_sync(&adapter->watchdog_task);
 
@@ -2989,7 +3100,7 @@ static int ixgbe_poll(struct napi_struct *napi, int budget)
 	/* If budget not fully consumed, exit the polling mode */
 	if (work_done < budget) {
 		napi_complete(napi);
-		if (adapter->itr_setting & 1)
+		if (adapter->rx_itr_setting & 1)
 			ixgbe_set_itr(adapter);
 		if (!test_bit(__IXGBE_DOWN, &adapter->state))
 			ixgbe_irq_enable_queues(adapter, IXGBE_EIMS_RTX_QUEUE);
@@ -3599,7 +3710,10 @@ static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
 		if (!q_vector)
 			goto err_out;
 		q_vector->adapter = adapter;
-		q_vector->eitr = adapter->eitr_param;
+		if (q_vector->txr_count && !q_vector->rxr_count)
+			q_vector->eitr = adapter->tx_eitr_param;
+		else
+			q_vector->eitr = adapter->rx_eitr_param;
 		q_vector->v_idx = q_idx;
 		netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64);
 		adapter->q_vector[q_idx] = q_vector;
@@ -3868,8 +3982,10 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	hw->fc.disable_fc_autoneg = false;
 
 	/* enable itr by default in dynamic mode */
-	adapter->itr_setting = 1;
-	adapter->eitr_param = 20000;
+	adapter->rx_itr_setting = 1;
+	adapter->rx_eitr_param = 20000;
+	adapter->tx_itr_setting = 1;
+	adapter->tx_eitr_param = 10000;
 
 	/* set defaults for eitr in MegaBytes */
 	adapter->eitr_low = 10;
@@ -4409,10 +4525,13 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 
 	/* 82598 hardware only has a 32 bit counter in the high register */
 	if (hw->mac.type == ixgbe_mac_82599EB) {
+		u64 tmp;
 		adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
-		IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */
+		tmp = IXGBE_READ_REG(hw, IXGBE_GORCH) & 0xF; /* 4 high bits of GORC */
+		adapter->stats.gorc += (tmp << 32);
 		adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
-		IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */
+		tmp = IXGBE_READ_REG(hw, IXGBE_GOTCH) & 0xF; /* 4 high bits of GOTC */
+		adapter->stats.gotc += (tmp << 32);
 		adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORL);
 		IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */
 		adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
@@ -5048,7 +5167,6 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
 	/* Right now, we support IPv4 only */
 	struct ixgbe_atr_input atr_input;
 	struct tcphdr *th;
-	struct udphdr *uh;
 	struct iphdr *iph = ip_hdr(skb);
 	struct ethhdr *eth = (struct ethhdr *)skb->data;
 	u16 vlan_id, src_port, dst_port, flex_bytes;
@@ -5062,12 +5180,6 @@ static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
 		dst_port = th->dest;
 		l4type |= IXGBE_ATR_L4TYPE_TCP;
 		/* l4type IPv4 type is 0, no need to assign */
-	} else if(iph->protocol == IPPROTO_UDP) {
-		uh = udp_hdr(skb);
-		src_port = uh->source;
-		dst_port = uh->dest;
-		l4type |= IXGBE_ATR_L4TYPE_UDP;
-		/* l4type IPv4 type is 0, no need to assign */
 	} else {
 		/* Unsupported L4 header, just bail here */
 		return;
@@ -5471,12 +5583,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		goto err_pci_reg;
 	}
 
-	err = pci_enable_pcie_error_reporting(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
-		                    "0x%x\n", err);
-		/* non-fatal, continue */
-	}
+	pci_enable_pcie_error_reporting(pdev);
 
 	pci_set_master(pdev);
 	pci_save_state(pdev);
@@ -5785,7 +5892,6 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	int err;
 
 	set_bit(__IXGBE_DOWN, &adapter->state);
 	/* clear the module not found bit to make sure the worker won't
@@ -5836,10 +5942,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 
 	free_netdev(netdev);
 
-	err = pci_disable_pcie_error_reporting(pdev);
-	if (err)
-		dev_err(&pdev->dev,
-		        "pci_disable_pcie_error_reporting failed 0x%x\n", err);
+	pci_disable_pcie_error_reporting(pdev);
 
 	pci_disable_device(pdev);
 }
@@ -5891,6 +5994,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 	} else {
 		pci_set_master(pdev);
 		pci_restore_state(pdev);
+		pci_save_state(pdev);
 
 		pci_wake_from_d3(pdev, false);
 
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 8761d7899f7..ef4bdd58e01 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -49,9 +49,11 @@
 #define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM      0x10E1
 #define IXGBE_DEV_ID_82598EB_XF_LR       0x10F4
 #define IXGBE_DEV_ID_82599_KX4           0x10F7
+#define IXGBE_DEV_ID_82599_KX4_MEZZ      0x1514
 #define IXGBE_DEV_ID_82599_CX4           0x10F9
 #define IXGBE_DEV_ID_82599_SFP           0x10FB
 #define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
+#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
 
 /* General Registers */
 #define IXGBE_CTRL      0x00000
@@ -1336,6 +1338,8 @@
 #define IXGBE_AUTOC_KX4_SUPP    0x80000000
 #define IXGBE_AUTOC_KX_SUPP     0x40000000
 #define IXGBE_AUTOC_PAUSE       0x30000000
+#define IXGBE_AUTOC_ASM_PAUSE   0x20000000
+#define IXGBE_AUTOC_SYM_PAUSE   0x10000000
 #define IXGBE_AUTOC_RF          0x08000000
 #define IXGBE_AUTOC_PD_TMR      0x06000000
 #define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000
@@ -1404,6 +1408,8 @@
 #define IXGBE_LINK_UP_TIME      90 /* 9.0 Seconds */
 #define IXGBE_AUTO_NEG_TIME     45 /* 4.5 Seconds */
 
+#define IXGBE_LINKS2_AN_SUPPORTED   0x00000040
+
 /* PCS1GLSTA Bit Masks */
 #define IXGBE_PCS1GLSTA_LINK_OK         1
 #define IXGBE_PCS1GLSTA_SYNK_OK         0x10
@@ -1424,6 +1430,11 @@
 #define IXGBE_PCS1GLCTL_AN_ENABLE       0x10000
 #define IXGBE_PCS1GLCTL_AN_RESTART      0x20000
 
+/* ANLP1 Bit Masks */
+#define IXGBE_ANLP1_PAUSE               0x0C00
+#define IXGBE_ANLP1_SYM_PAUSE           0x0400
+#define IXGBE_ANLP1_ASM_PAUSE           0x0800
+
 /* SW Semaphore Register bitmasks */
 #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
 #define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */