xscale: Move the Intel XScale IXP drivers

Move the Intel XScale IXP drivers into drivers/net/ethernet/xscale/
and make the necessary Kconfig and Makefile changes.

CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 212 deletions

diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ixp2000/ixp2400-msf.c
deleted file mode 100644
index f5ffd7e05d2..00000000000
--- a/drivers/net/ixp2000/ixp2400-msf.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Generic library functions for the MSF (Media and Switch Fabric) unit
- * found on the Intel IXP2400 network processor.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/ixp2000-regs.h>
-#include <asm/delay.h>
-#include <asm/io.h>
-#include "ixp2400-msf.h"
-
-/*
- * This is the Intel recommended PLL init procedure as described on
- * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual.
- */
-static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp)
-{
-	int rx_dual_clock;
-	int tx_dual_clock;
-	u32 value;
-
-	/*
-	 * If the RX mode is not 1x32, we have to enable both RX PLLs
-	 * (#0 and #1.)  The same thing for the TX direction.
-	 */
-	rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK);
-	tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK);
-
-	/*
-	 * Read initial value.
-	 */
-	value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL);
-
-	/*
-	 * Put PLLs in powerdown and bypass mode.
-	 */
-	value |= 0x0000f0f0;
-	ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
-	/*
-	 * Set single or dual clock mode bits.
-	 */
-	value &= ~0x03000000;
-	value |= (rx_dual_clock << 24) | (tx_dual_clock << 25);
-
-	/*
-	 * Set multipliers.
-	 */
-	value &= ~0x00ff0000;
-	value |= mp->rxclk01_multiplier << 16;
-	value |= mp->rxclk23_multiplier << 18;
-	value |= mp->txclk01_multiplier << 20;
-	value |= mp->txclk23_multiplier << 22;
-
-	/*
-	 * And write value.
-	 */
-	ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
-	/*
-	 * Disable PLL bypass mode.
-	 */
-	value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15);
-	ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
-	/*
-	 * Turn on PLLs.
-	 */
-	value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7);
-	ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
-
-	/*
-	 * Wait for PLLs to lock.  There are lock status bits, but IXP2400
-	 * erratum #65 says that these lock bits should not be relied upon
-	 * as they might not accurately reflect the true state of the PLLs.
-	 */
-	udelay(100);
-}
-
-/*
- * Needed according to p480 of Programmer's Reference Manual.
- */
-static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp)
-{
-	int size_bits;
-	int i;
-
-	/*
-	 * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer
-	 * corruption) in the Intel-recommended way: do not add the RBUF
-	 * elements susceptible to corruption to the freelist.
-	 */
-	size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK;
-	if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) {
-		for (i = 1; i < 128; i++) {
-			if (i == 9 || i == 18 || i == 27)
-				continue;
-			ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
-		}
-	} else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) {
-		for (i = 1; i < 64; i++) {
-			if (i == 4 || i == 9 || i == 13)
-				continue;
-			ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
-		}
-	} else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) {
-		for (i = 1; i < 32; i++) {
-			if (i == 2 || i == 4 || i == 6)
-				continue;
-			ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
-		}
-	}
-}
-
-static u32 ixp2400_msf_valid_channels(u32 reg)
-{
-	u32 channels;
-
-	channels = 0;
-	switch (reg & IXP2400_RX_MODE_WIDTH_MASK) {
-	case IXP2400_RX_MODE_1x32:
-		channels = 0x1;
-		if (reg & IXP2400_RX_MODE_MPHY &&
-		    !(reg & IXP2400_RX_MODE_MPHY_32))
-			channels = 0xf;
-		break;
-
-	case IXP2400_RX_MODE_2x16:
-		channels = 0x5;
-		break;
-
-	case IXP2400_RX_MODE_4x8:
-		channels = 0xf;
-		break;
-
-	case IXP2400_RX_MODE_1x16_2x8:
-		channels = 0xd;
-		break;
-	}
-
-	return channels;
-}
-
-static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp)
-{
-	u32 value;
-
-	value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff;
-	value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28;
-	ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value);
-}
-
-static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp)
-{
-	u32 value;
-
-	value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff;
-	value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28;
-	ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value);
-}
-
-
-void ixp2400_msf_init(struct ixp2400_msf_parameters *mp)
-{
-	u32 value;
-	int i;
-
-	/*
-	 * Init the RX/TX PLLs based on the passed parameter block.
-	 */
-	ixp2400_pll_init(mp);
-
-	/*
-	 * Reset MSF.  Bit 7 in IXP_RESET_0 resets the MSF.
-	 */
-	value = ixp2000_reg_read(IXP2000_RESET0);
-	ixp2000_reg_write(IXP2000_RESET0, value | 0x80);
-	ixp2000_reg_write(IXP2000_RESET0, value & ~0x80);
-
-	/*
-	 * Initialise the RX section.
-	 */
-	ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1);
-	ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode);
-	for (i = 0; i < 4; i++) {
-		ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i,
-						mp->rx_channel_mode[i]);
-	}
-	ixp2400_msf_free_rbuf_entries(mp);
-	ixp2400_msf_enable_rx(mp);
-
-	/*
-	 * Initialise the TX section.
-	 */
-	ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1);
-	ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode);
-	for (i = 0; i < 4; i++) {
-		ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i,
-						mp->tx_channel_mode[i]);
-	}
-	ixp2400_msf_enable_tx(mp);
-}