summaryrefslogtreecommitdiffstats
path: root/drivers/net/meth.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/meth.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/meth.h')
-rw-r--r--drivers/net/meth.h246
1 files changed, 246 insertions, 0 deletions
diff --git a/drivers/net/meth.h b/drivers/net/meth.h
new file mode 100644
index 00000000000..84960dae2a2
--- /dev/null
+++ b/drivers/net/meth.h
@@ -0,0 +1,246 @@
+
+/*
+ * snull.h -- definitions for the network module
+ *
+ * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet
+ * Copyright (C) 2001 O'Reilly & Associates
+ *
+ * The source code in this file can be freely used, adapted,
+ * and redistributed in source or binary form, so long as an
+ * acknowledgment appears in derived source files. The citation
+ * should list that the code comes from the book "Linux Device
+ * Drivers" by Alessandro Rubini and Jonathan Corbet, published
+ * by O'Reilly & Associates. No warranty is attached;
+ * we cannot take responsibility for errors or fitness for use.
+ */
+
+/* version dependencies have been confined to a separate file */
+
+/* Tunable parameters */
+#define TX_RING_ENTRIES 64 /* 64-512?*/
+
+#define RX_RING_ENTRIES 16 /* Do not change */
+/* Internal constants */
+#define TX_RING_BUFFER_SIZE (TX_RING_ENTRIES*sizeof(tx_packet))
+#define RX_BUFFER_SIZE 1546 /* ethenet packet size */
+#define METH_RX_BUFF_SIZE 4096
+#define METH_RX_HEAD 34 /* status + 3 quad garbage-fill + 2 byte zero-pad */
+#define RX_BUFFER_OFFSET (sizeof(rx_status_vector)+2) /* staus vector + 2 bytes of padding */
+#define RX_BUCKET_SIZE 256
+
+#undef BIT
+#define BIT(x) (1UL << (x))
+
+/* For more detailed explanations of what each field menas,
+ see Nick's great comments to #defines below (or docs, if
+ you are lucky enough toget hold of them :)*/
+
+/* tx status vector is written over tx command header upon
+ dma completion. */
+
+typedef struct tx_status_vector {
+ u64 sent:1; /* always set to 1...*/
+ u64 pad0:34;/* always set to 0 */
+ u64 flags:9; /*I'm too lazy to specify each one separately at the moment*/
+ u64 col_retry_cnt:4; /*collision retry count*/
+ u64 len:16; /*Transmit length in bytes*/
+} tx_status_vector;
+
+/*
+ * Each packet is 128 bytes long.
+ * It consists of header, 0-3 concatination
+ * buffer pointers and up to 120 data bytes.
+ */
+typedef struct tx_packet_hdr {
+ u64 pad1:36; /*should be filled with 0 */
+ u64 cat_ptr3_valid:1, /*Concatination pointer valid flags*/
+ cat_ptr2_valid:1,
+ cat_ptr1_valid:1;
+ u64 tx_int_flag:1; /*Generate TX intrrupt when packet has been sent*/
+ u64 term_dma_flag:1; /*Terminate transmit DMA on transmit abort conditions*/
+ u64 data_offset:7; /*Starting byte offset in ring data block*/
+ u64 data_len:16; /*Length of valid data in bytes-1*/
+} tx_packet_hdr;
+typedef union tx_cat_ptr {
+ struct {
+ u64 pad2:16; /* should be 0 */
+ u64 len:16; /*length of buffer data - 1*/
+ u64 start_addr:29; /*Physical starting address*/
+ u64 pad1:3; /* should be zero */
+ } form;
+ u64 raw;
+} tx_cat_ptr;
+
+typedef struct tx_packet {
+ union {
+ tx_packet_hdr header;
+ tx_status_vector res;
+ u64 raw;
+ }header;
+ union {
+ tx_cat_ptr cat_buf[3];
+ char dt[120];
+ } data;
+} tx_packet;
+
+typedef union rx_status_vector {
+ volatile struct {
+ u64 pad1:1;/*fill it with ones*/
+ u64 pad2:15;/*fill with 0*/
+ u64 ip_chk_sum:16;
+ u64 seq_num:5;
+ u64 mac_addr_match:1;
+ u64 mcast_addr_match:1;
+ u64 carrier_event_seen:1;
+ u64 bad_packet:1;
+ u64 long_event_seen:1;
+ u64 invalid_preamble:1;
+ u64 broadcast:1;
+ u64 multicast:1;
+ u64 crc_error:1;
+ u64 huh:1;/*???*/
+ u64 rx_code_violation:1;
+ u64 rx_len:16;
+ } parsed;
+ volatile u64 raw;
+} rx_status_vector;
+
+typedef struct rx_packet {
+ rx_status_vector status;
+ u64 pad[3]; /* For whatever reason, there needs to be 4 double-word offset */
+ u16 pad2;
+ char buf[METH_RX_BUFF_SIZE-sizeof(rx_status_vector)-3*sizeof(u64)-sizeof(u16)];/* data */
+} rx_packet;
+
+#define TX_INFO_RPTR 0x00FF0000
+#define TX_INFO_WPTR 0x000000FF
+
+ /* Bits in METH_MAC */
+
+#define SGI_MAC_RESET BIT(0) /* 0: MAC110 active in run mode, 1: Global reset signal to MAC110 core is active */
+#define METH_PHY_FDX BIT(1) /* 0: Disable full duplex, 1: Enable full duplex */
+#define METH_PHY_LOOP BIT(2) /* 0: Normal operation, follows 10/100mbit and M10T/MII select, 1: loops internal MII bus */
+ /* selects ignored */
+#define METH_100MBIT BIT(3) /* 0: 10meg mode, 1: 100meg mode */
+#define METH_PHY_MII BIT(4) /* 0: MII selected, 1: SIA selected */
+ /* Note: when loopback is set this bit becomes collision control. Setting this bit will */
+ /* cause a collision to be reported. */
+
+ /* Bits 5 and 6 are used to determine the the Destination address filter mode */
+#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
+#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
+#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
+#define METH_PROMISC 0x60 /* 11: Promiscious mode */
+
+#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */
+
+#define METH_MAC_IPG 0x1ffff00
+
+#define METH_DEFAULT_IPG ((17<<15) | (11<<22) | (21<<8))
+ /* 0x172e5c00 */ /* 23, 23, 23 */ /*0x54A9500 *//*21,21,21*/
+ /* Bits 8 through 14 are used to determine Inter-Packet Gap between "Back to Back" packets */
+ /* The gap depends on the clock speed of the link, 80ns per increment for 100baseT, 800ns */
+ /* per increment for 10BaseT */
+
+ /* Bits 15 through 21 are used to determine IPGR1 */
+
+ /* Bits 22 through 28 are used to determine IPGR2 */
+
+#define METH_REV_SHIFT 29 /* Bits 29 through 31 are used to determine the revision */
+ /* 000: Inital revision */
+ /* 001: First revision, Improved TX concatenation */
+
+
+/* DMA control bits */
+#define METH_RX_OFFSET_SHIFT 12 /* Bits 12:14 of DMA control register indicate starting offset of packet data for RX operation */
+#define METH_RX_DEPTH_SHIFT 4 /* Bits 8:4 define RX fifo depth -- when # of RX fifo entries != depth, interrupt is generted */
+
+#define METH_DMA_TX_EN BIT(1) /* enable TX DMA */
+#define METH_DMA_TX_INT_EN BIT(0) /* enable TX Buffer Empty interrupt */
+#define METH_DMA_RX_EN BIT(15) /* Enable RX */
+#define METH_DMA_RX_INT_EN BIT(9) /* Enable interrupt on RX packet */
+
+/* RX FIFO MCL Info bits */
+#define METH_RX_FIFO_WPTR(x) (((x)>>16)&0xf)
+#define METH_RX_FIFO_RPTR(x) (((x)>>8)&0xf)
+#define METH_RX_FIFO_DEPTH(x) ((x)&0x1f)
+
+/* RX status bits */
+
+#define METH_RX_ST_VALID BIT(63)
+#define METH_RX_ST_RCV_CODE_VIOLATION BIT(16)
+#define METH_RX_ST_DRBL_NBL BIT(17)
+#define METH_RX_ST_CRC_ERR BIT(18)
+#define METH_RX_ST_MCAST_PKT BIT(19)
+#define METH_RX_ST_BCAST_PKT BIT(20)
+#define METH_RX_ST_INV_PREAMBLE_CTX BIT(21)
+#define METH_RX_ST_LONG_EVT_SEEN BIT(22)
+#define METH_RX_ST_BAD_PACKET BIT(23)
+#define METH_RX_ST_CARRIER_EVT_SEEN BIT(24)
+#define METH_RX_ST_MCAST_FILTER_MATCH BIT(25)
+#define METH_RX_ST_PHYS_ADDR_MATCH BIT(26)
+
+#define METH_RX_STATUS_ERRORS \
+ ( \
+ METH_RX_ST_RCV_CODE_VIOLATION| \
+ METH_RX_ST_CRC_ERR| \
+ METH_RX_ST_INV_PREAMBLE_CTX| \
+ METH_RX_ST_LONG_EVT_SEEN| \
+ METH_RX_ST_BAD_PACKET| \
+ METH_RX_ST_CARRIER_EVT_SEEN \
+ )
+ /* Bits in METH_INT */
+ /* Write _1_ to corresponding bit to clear */
+#define METH_INT_TX_EMPTY BIT(0) /* 0: No interrupt pending, 1: The TX ring buffer is empty */
+#define METH_INT_TX_PKT BIT(1) /* 0: No interrupt pending */
+ /* 1: A TX message had the INT request bit set, the packet has been sent. */
+#define METH_INT_TX_LINK_FAIL BIT(2) /* 0: No interrupt pending, 1: PHY has reported a link failure */
+#define METH_INT_MEM_ERROR BIT(3) /* 0: No interrupt pending */
+ /* 1: A memory error occurred durring DMA, DMA stopped, Fatal */
+#define METH_INT_TX_ABORT BIT(4) /* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */
+#define METH_INT_RX_THRESHOLD BIT(5) /* 0: No interrupt pending, 1: Selected receive threshold condition Valid */
+#define METH_INT_RX_UNDERFLOW BIT(6) /* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */
+#define METH_INT_RX_OVERFLOW BIT(7) /* 0: No interrupt pending, 1: DMA FIFO Overflow, DMA stopped, FATAL */
+
+/*#define METH_INT_RX_RPTR_MASK 0x0001F00*/ /* Bits 8 through 12 alias of RX read-pointer */
+#define METH_INT_RX_RPTR_MASK 0x0000F00 /* Bits 8 through 11 alias of RX read-pointer - so, is Rx FIFO 16 or 32 entry?*/
+
+ /* Bits 13 through 15 are always 0. */
+
+#define METH_INT_TX_RPTR_MASK 0x1FF0000 /* Bits 16 through 24 alias of TX read-pointer */
+
+#define METH_INT_RX_SEQ_MASK 0x2E000000 /* Bits 25 through 29 are the starting seq number for the message at the */
+
+ /* top of the queue */
+
+#define METH_INT_ERROR (METH_INT_TX_LINK_FAIL| \
+ METH_INT_MEM_ERROR| \
+ METH_INT_TX_ABORT| \
+ METH_INT_RX_OVERFLOW| \
+ METH_INT_RX_UNDERFLOW)
+
+#define METH_INT_MCAST_HASH BIT(30) /* If RX DMA is enabled the hash select logic output is latched here */
+
+/* TX status bits */
+#define METH_TX_ST_DONE BIT(63) /* TX complete */
+#define METH_TX_ST_SUCCESS BIT(23) /* Packet was transmitted successfully */
+#define METH_TX_ST_TOOLONG BIT(24) /* TX abort due to excessive length */
+#define METH_TX_ST_UNDERRUN BIT(25) /* TX abort due to underrun (?) */
+#define METH_TX_ST_EXCCOLL BIT(26) /* TX abort due to excess collisions */
+#define METH_TX_ST_DEFER BIT(27) /* TX abort due to excess deferals */
+#define METH_TX_ST_LATECOLL BIT(28) /* TX abort due to late collision */
+
+
+/* Tx command header bits */
+#define METH_TX_CMD_INT_EN BIT(24) /* Generate TX interrupt when packet is sent */
+
+/* Phy MDIO interface busy flag */
+#define MDIO_BUSY BIT(16)
+#define MDIO_DATA_MASK 0xFFFF
+/* PHY defines */
+#define PHY_QS6612X 0x0181441 /* Quality TX */
+#define PHY_ICS1889 0x0015F41 /* ICS FX */
+#define PHY_ICS1890 0x0015F42 /* ICS TX */
+#define PHY_DP83840 0x20005C0 /* National TX */
+
+#define ADVANCE_RX_PTR(x) x=(x+1)&(RX_RING_ENTRIES-1)