summaryrefslogtreecommitdiffstats
path: root/drivers/net/ne2k-pci.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/ne2k-pci.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/ne2k-pci.c')
-rw-r--r--drivers/net/ne2k-pci.c712
1 files changed, 712 insertions, 0 deletions
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
new file mode 100644
index 00000000000..a1a6c08e7dc
--- /dev/null
+++ b/drivers/net/ne2k-pci.c
@@ -0,0 +1,712 @@
+/* ne2k-pci.c: A NE2000 clone on PCI bus driver for Linux. */
+/*
+ A Linux device driver for PCI NE2000 clones.
+
+ Authors and other copyright holders:
+ 1992-2000 by Donald Becker, NE2000 core and various modifications.
+ 1995-1998 by Paul Gortmaker, core modifications and PCI support.
+ Copyright 1993 assigned to the United States Government as represented
+ by the Director, National Security Agency.
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ Issues remaining:
+ People are making PCI ne2000 clones! Oh the horror, the horror...
+ Limited full-duplex support.
+*/
+
+#define DRV_NAME "ne2k-pci"
+#define DRV_VERSION "1.03"
+#define DRV_RELDATE "9/22/2003"
+
+
+/* The user-configurable values.
+ These may be modified when a driver module is loaded.*/
+
+static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
+
+#define MAX_UNITS 8 /* More are supported, limit only on options */
+/* Used to pass the full-duplex flag, etc. */
+static int full_duplex[MAX_UNITS];
+static int options[MAX_UNITS];
+
+/* Force a non std. amount of memory. Units are 256 byte pages. */
+/* #define PACKETBUF_MEMSIZE 0x40 */
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "8390.h"
+
+/* These identify the driver base version and may not be removed. */
+static char version[] __devinitdata =
+KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " D. Becker/P. Gortmaker\n"
+KERN_INFO " http://www.scyld.com/network/ne2k-pci.html\n";
+
+#if defined(__powerpc__)
+#define inl_le(addr) le32_to_cpu(inl(addr))
+#define inw_le(addr) le16_to_cpu(inw(addr))
+#endif
+
+#define PFX DRV_NAME ": "
+
+MODULE_AUTHOR("Donald Becker / Paul Gortmaker");
+MODULE_DESCRIPTION("PCI NE2000 clone driver");
+MODULE_LICENSE("GPL");
+
+module_param(debug, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+MODULE_PARM_DESC(debug, "debug level (1-2)");
+MODULE_PARM_DESC(options, "Bit 5: full duplex");
+MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)");
+
+/* Some defines that people can play with if so inclined. */
+
+/* Use 32 bit data-movement operations instead of 16 bit. */
+#define USE_LONGIO
+
+/* Do we implement the read before write bugfix ? */
+/* #define NE_RW_BUGFIX */
+
+/* Flags. We rename an existing ei_status field to store flags! */
+/* Thus only the low 8 bits are usable for non-init-time flags. */
+#define ne2k_flags reg0
+enum {
+ ONLY_16BIT_IO=8, ONLY_32BIT_IO=4, /* Chip can do only 16/32-bit xfers. */
+ FORCE_FDX=0x20, /* User override. */
+ REALTEK_FDX=0x40, HOLTEK_FDX=0x80,
+ STOP_PG_0x60=0x100,
+};
+
+enum ne2k_pci_chipsets {
+ CH_RealTek_RTL_8029 = 0,
+ CH_Winbond_89C940,
+ CH_Compex_RL2000,
+ CH_KTI_ET32P2,
+ CH_NetVin_NV5000SC,
+ CH_Via_86C926,
+ CH_SureCom_NE34,
+ CH_Winbond_W89C940F,
+ CH_Holtek_HT80232,
+ CH_Holtek_HT80229,
+ CH_Winbond_89C940_8c4a,
+};
+
+
+static struct {
+ char *name;
+ int flags;
+} pci_clone_list[] __devinitdata = {
+ {"RealTek RTL-8029", REALTEK_FDX},
+ {"Winbond 89C940", 0},
+ {"Compex RL2000", 0},
+ {"KTI ET32P2", 0},
+ {"NetVin NV5000SC", 0},
+ {"Via 86C926", ONLY_16BIT_IO},
+ {"SureCom NE34", 0},
+ {"Winbond W89C940F", 0},
+ {"Holtek HT80232", ONLY_16BIT_IO | HOLTEK_FDX},
+ {"Holtek HT80229", ONLY_32BIT_IO | HOLTEK_FDX | STOP_PG_0x60 },
+ {"Winbond W89C940(misprogrammed)", 0},
+ {NULL,}
+};
+
+
+static struct pci_device_id ne2k_pci_tbl[] = {
+ { 0x10ec, 0x8029, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_RealTek_RTL_8029 },
+ { 0x1050, 0x0940, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Winbond_89C940 },
+ { 0x11f6, 0x1401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Compex_RL2000 },
+ { 0x8e2e, 0x3000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_KTI_ET32P2 },
+ { 0x4a14, 0x5000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_NetVin_NV5000SC },
+ { 0x1106, 0x0926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Via_86C926 },
+ { 0x10bd, 0x0e34, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_SureCom_NE34 },
+ { 0x1050, 0x5a5a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Winbond_W89C940F },
+ { 0x12c3, 0x0058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Holtek_HT80232 },
+ { 0x12c3, 0x5598, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Holtek_HT80229 },
+ { 0x8c4a, 0x1980, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Winbond_89C940_8c4a },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, ne2k_pci_tbl);
+
+
+/* ---- No user-serviceable parts below ---- */
+
+#define NE_BASE (dev->base_addr)
+#define NE_CMD 0x00
+#define NE_DATAPORT 0x10 /* NatSemi-defined port window offset. */
+#define NE_RESET 0x1f /* Issue a read to reset, a write to clear. */
+#define NE_IO_EXTENT 0x20
+
+#define NESM_START_PG 0x40 /* First page of TX buffer */
+#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
+
+
+static int ne2k_pci_open(struct net_device *dev);
+static int ne2k_pci_close(struct net_device *dev);
+
+static void ne2k_pci_reset_8390(struct net_device *dev);
+static void ne2k_pci_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+ int ring_page);
+static void ne2k_pci_block_input(struct net_device *dev, int count,
+ struct sk_buff *skb, int ring_offset);
+static void ne2k_pci_block_output(struct net_device *dev, const int count,
+ const unsigned char *buf, const int start_page);
+static struct ethtool_ops ne2k_pci_ethtool_ops;
+
+
+
+/* There is no room in the standard 8390 structure for extra info we need,
+ so we build a meta/outer-wrapper structure.. */
+struct ne2k_pci_card {
+ struct net_device *dev;
+ struct pci_dev *pci_dev;
+};
+
+
+
+/*
+ NEx000-clone boards have a Station Address (SA) PROM (SAPROM) in the packet
+ buffer memory space. By-the-spec NE2000 clones have 0x57,0x57 in bytes
+ 0x0e,0x0f of the SAPROM, while other supposed NE2000 clones must be
+ detected by their SA prefix.
+
+ Reading the SAPROM from a word-wide card with the 8390 set in byte-wide
+ mode results in doubled values, which can be detected and compensated for.
+
+ The probe is also responsible for initializing the card and filling
+ in the 'dev' and 'ei_status' structures.
+*/
+
+
+static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev;
+ int i;
+ unsigned char SA_prom[32];
+ int start_page, stop_page;
+ int irq, reg0, chip_idx = ent->driver_data;
+ static unsigned int fnd_cnt;
+ long ioaddr;
+ int flags = pci_clone_list[chip_idx].flags;
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+ static int printed_version;
+ if (!printed_version++)
+ printk(version);
+#endif
+
+ fnd_cnt++;
+
+ i = pci_enable_device (pdev);
+ if (i)
+ return i;
+
+ ioaddr = pci_resource_start (pdev, 0);
+ irq = pdev->irq;
+
+ if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) {
+ printk (KERN_ERR PFX "no I/O resource at PCI BAR #0\n");
+ return -ENODEV;
+ }
+
+ if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) {
+ printk (KERN_ERR PFX "I/O resource 0x%x @ 0x%lx busy\n",
+ NE_IO_EXTENT, ioaddr);
+ return -EBUSY;
+ }
+
+ reg0 = inb(ioaddr);
+ if (reg0 == 0xFF)
+ goto err_out_free_res;
+
+ /* Do a preliminary verification that we have a 8390. */
+ {
+ int regd;
+ outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
+ regd = inb(ioaddr + 0x0d);
+ outb(0xff, ioaddr + 0x0d);
+ outb(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
+ inb(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
+ if (inb(ioaddr + EN0_COUNTER0) != 0) {
+ outb(reg0, ioaddr);
+ outb(regd, ioaddr + 0x0d); /* Restore the old values. */
+ goto err_out_free_res;
+ }
+ }
+
+ /* Allocate net_device, dev->priv; fill in 8390 specific dev fields. */
+ dev = alloc_ei_netdev();
+ if (!dev) {
+ printk (KERN_ERR PFX "cannot allocate ethernet device\n");
+ goto err_out_free_res;
+ }
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ /* Reset card. Who knows what dain-bramaged state it was left in. */
+ {
+ unsigned long reset_start_time = jiffies;
+
+ outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
+
+ /* This looks like a horrible timing loop, but it should never take
+ more than a few cycles.
+ */
+ while ((inb(ioaddr + EN0_ISR) & ENISR_RESET) == 0)
+ /* Limit wait: '2' avoids jiffy roll-over. */
+ if (jiffies - reset_start_time > 2) {
+ printk(KERN_ERR PFX "Card failure (no reset ack).\n");
+ goto err_out_free_netdev;
+ }
+
+ outb(0xff, ioaddr + EN0_ISR); /* Ack all intr. */
+ }
+
+ /* Read the 16 bytes of station address PROM.
+ We must first initialize registers, similar to NS8390_init(eifdev, 0).
+ We can't reliably read the SAPROM address without this.
+ (I learned the hard way!). */
+ {
+ struct {unsigned char value, offset; } program_seq[] = {
+ {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
+ {0x49, EN0_DCFG}, /* Set word-wide access. */
+ {0x00, EN0_RCNTLO}, /* Clear the count regs. */
+ {0x00, EN0_RCNTHI},
+ {0x00, EN0_IMR}, /* Mask completion irq. */
+ {0xFF, EN0_ISR},
+ {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
+ {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
+ {32, EN0_RCNTLO},
+ {0x00, EN0_RCNTHI},
+ {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
+ {0x00, EN0_RSARHI},
+ {E8390_RREAD+E8390_START, E8390_CMD},
+ };
+ for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
+ outb(program_seq[i].value, ioaddr + program_seq[i].offset);
+
+ }
+
+ /* Note: all PCI cards have at least 16 bit access, so we don't have
+ to check for 8 bit cards. Most cards permit 32 bit access. */
+ if (flags & ONLY_32BIT_IO) {
+ for (i = 0; i < 4 ; i++)
+ ((u32 *)SA_prom)[i] = le32_to_cpu(inl(ioaddr + NE_DATAPORT));
+ } else
+ for(i = 0; i < 32 /*sizeof(SA_prom)*/; i++)
+ SA_prom[i] = inb(ioaddr + NE_DATAPORT);
+
+ /* We always set the 8390 registers for word mode. */
+ outb(0x49, ioaddr + EN0_DCFG);
+ start_page = NESM_START_PG;
+
+ stop_page = flags & STOP_PG_0x60 ? 0x60 : NESM_STOP_PG;
+
+ /* Set up the rest of the parameters. */
+ dev->irq = irq;
+ dev->base_addr = ioaddr;
+ pci_set_drvdata(pdev, dev);
+
+ ei_status.name = pci_clone_list[chip_idx].name;
+ ei_status.tx_start_page = start_page;
+ ei_status.stop_page = stop_page;
+ ei_status.word16 = 1;
+ ei_status.ne2k_flags = flags;
+ if (fnd_cnt < MAX_UNITS) {
+ if (full_duplex[fnd_cnt] > 0 || (options[fnd_cnt] & FORCE_FDX))
+ ei_status.ne2k_flags |= FORCE_FDX;
+ }
+
+ ei_status.rx_start_page = start_page + TX_PAGES;
+#ifdef PACKETBUF_MEMSIZE
+ /* Allow the packet buffer size to be overridden by know-it-alls. */
+ ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;
+#endif
+
+ ei_status.reset_8390 = &ne2k_pci_reset_8390;
+ ei_status.block_input = &ne2k_pci_block_input;
+ ei_status.block_output = &ne2k_pci_block_output;
+ ei_status.get_8390_hdr = &ne2k_pci_get_8390_hdr;
+ ei_status.priv = (unsigned long) pdev;
+ dev->open = &ne2k_pci_open;
+ dev->stop = &ne2k_pci_close;
+ dev->ethtool_ops = &ne2k_pci_ethtool_ops;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = ei_poll;
+#endif
+ NS8390_init(dev, 0);
+
+ i = register_netdev(dev);
+ if (i)
+ goto err_out_free_netdev;
+
+ printk("%s: %s found at %#lx, IRQ %d, ",
+ dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq);
+ for(i = 0; i < 6; i++) {
+ printk("%2.2X%s", SA_prom[i], i == 5 ? ".\n": ":");
+ dev->dev_addr[i] = SA_prom[i];
+ }
+
+ return 0;
+
+err_out_free_netdev:
+ free_netdev (dev);
+err_out_free_res:
+ release_region (ioaddr, NE_IO_EXTENT);
+ pci_set_drvdata (pdev, NULL);
+ return -ENODEV;
+
+}
+
+/*
+ * Magic incantation sequence for full duplex on the supported cards.
+ */
+static inline int set_realtek_fdx(struct net_device *dev)
+{
+ long ioaddr = dev->base_addr;
+
+ outb(0xC0 + E8390_NODMA, ioaddr + NE_CMD); /* Page 3 */
+ outb(0xC0, ioaddr + 0x01); /* Enable writes to CONFIG3 */
+ outb(0x40, ioaddr + 0x06); /* Enable full duplex */
+ outb(0x00, ioaddr + 0x01); /* Disable writes to CONFIG3 */
+ outb(E8390_PAGE0 + E8390_NODMA, ioaddr + NE_CMD); /* Page 0 */
+ return 0;
+}
+
+static inline int set_holtek_fdx(struct net_device *dev)
+{
+ long ioaddr = dev->base_addr;
+
+ outb(inb(ioaddr + 0x20) | 0x80, ioaddr + 0x20);
+ return 0;
+}
+
+static int ne2k_pci_set_fdx(struct net_device *dev)
+{
+ if (ei_status.ne2k_flags & REALTEK_FDX)
+ return set_realtek_fdx(dev);
+ else if (ei_status.ne2k_flags & HOLTEK_FDX)
+ return set_holtek_fdx(dev);
+
+ return -EOPNOTSUPP;
+}
+
+static int ne2k_pci_open(struct net_device *dev)
+{
+ int ret = request_irq(dev->irq, ei_interrupt, SA_SHIRQ, dev->name, dev);
+ if (ret)
+ return ret;
+
+ if (ei_status.ne2k_flags & FORCE_FDX)
+ ne2k_pci_set_fdx(dev);
+
+ ei_open(dev);
+ return 0;
+}
+
+static int ne2k_pci_close(struct net_device *dev)
+{
+ ei_close(dev);
+ free_irq(dev->irq, dev);
+ return 0;
+}
+
+/* Hard reset the card. This used to pause for the same period that a
+ 8390 reset command required, but that shouldn't be necessary. */
+static void ne2k_pci_reset_8390(struct net_device *dev)
+{
+ unsigned long reset_start_time = jiffies;
+
+ if (debug > 1) printk("%s: Resetting the 8390 t=%ld...",
+ dev->name, jiffies);
+
+ outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
+
+ ei_status.txing = 0;
+ ei_status.dmaing = 0;
+
+ /* This check _should_not_ be necessary, omit eventually. */
+ while ((inb(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
+ if (jiffies - reset_start_time > 2) {
+ printk("%s: ne2k_pci_reset_8390() did not complete.\n", dev->name);
+ break;
+ }
+ outb(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */
+}
+
+/* Grab the 8390 specific header. Similar to the block_input routine, but
+ we don't need to be concerned with ring wrap as the header will be at
+ the start of a page, so we optimize accordingly. */
+
+static void ne2k_pci_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+
+ long nic_base = dev->base_addr;
+
+ /* This *shouldn't* happen. If it does, it's the last thing you'll see */
+ if (ei_status.dmaing) {
+ printk("%s: DMAing conflict in ne2k_pci_get_8390_hdr "
+ "[DMAstat:%d][irqlock:%d].\n",
+ dev->name, ei_status.dmaing, ei_status.irqlock);
+ return;
+ }
+
+ ei_status.dmaing |= 0x01;
+ outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
+ outb(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
+ outb(0, nic_base + EN0_RCNTHI);
+ outb(0, nic_base + EN0_RSARLO); /* On page boundary */
+ outb(ring_page, nic_base + EN0_RSARHI);
+ outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+
+ if (ei_status.ne2k_flags & ONLY_16BIT_IO) {
+ insw(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
+ } else {
+ *(u32*)hdr = le32_to_cpu(inl(NE_BASE + NE_DATAPORT));
+ le16_to_cpus(&hdr->count);
+ }
+
+ outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
+ ei_status.dmaing &= ~0x01;
+}
+
+/* Block input and output, similar to the Crynwr packet driver. If you
+ are porting to a new ethercard, look at the packet driver source for hints.
+ The NEx000 doesn't share the on-board packet memory -- you have to put
+ the packet out through the "remote DMA" dataport using outb. */
+
+static void ne2k_pci_block_input(struct net_device *dev, int count,
+ struct sk_buff *skb, int ring_offset)
+{
+ long nic_base = dev->base_addr;
+ char *buf = skb->data;
+
+ /* This *shouldn't* happen. If it does, it's the last thing you'll see */
+ if (ei_status.dmaing) {
+ printk("%s: DMAing conflict in ne2k_pci_block_input "
+ "[DMAstat:%d][irqlock:%d].\n",
+ dev->name, ei_status.dmaing, ei_status.irqlock);
+ return;
+ }
+ ei_status.dmaing |= 0x01;
+ if (ei_status.ne2k_flags & ONLY_32BIT_IO)
+ count = (count + 3) & 0xFFFC;
+ outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
+ outb(count & 0xff, nic_base + EN0_RCNTLO);
+ outb(count >> 8, nic_base + EN0_RCNTHI);
+ outb(ring_offset & 0xff, nic_base + EN0_RSARLO);
+ outb(ring_offset >> 8, nic_base + EN0_RSARHI);
+ outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+
+ if (ei_status.ne2k_flags & ONLY_16BIT_IO) {
+ insw(NE_BASE + NE_DATAPORT,buf,count>>1);
+ if (count & 0x01) {
+ buf[count-1] = inb(NE_BASE + NE_DATAPORT);
+ }
+ } else {
+ insl(NE_BASE + NE_DATAPORT, buf, count>>2);
+ if (count & 3) {
+ buf += count & ~3;
+ if (count & 2) {
+ u16 *b = (u16 *)buf;
+
+ *b++ = le16_to_cpu(inw(NE_BASE + NE_DATAPORT));
+ buf = (char *)b;
+ }
+ if (count & 1)
+ *buf = inb(NE_BASE + NE_DATAPORT);
+ }
+ }
+
+ outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
+ ei_status.dmaing &= ~0x01;
+}
+
+static void ne2k_pci_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, const int start_page)
+{
+ long nic_base = NE_BASE;
+ unsigned long dma_start;
+
+ /* On little-endian it's always safe to round the count up for
+ word writes. */
+ if (ei_status.ne2k_flags & ONLY_32BIT_IO)
+ count = (count + 3) & 0xFFFC;
+ else
+ if (count & 0x01)
+ count++;
+
+ /* This *shouldn't* happen. If it does, it's the last thing you'll see */
+ if (ei_status.dmaing) {
+ printk("%s: DMAing conflict in ne2k_pci_block_output."
+ "[DMAstat:%d][irqlock:%d]\n",
+ dev->name, ei_status.dmaing, ei_status.irqlock);
+ return;
+ }
+ ei_status.dmaing |= 0x01;
+ /* We should already be in page 0, but to be safe... */
+ outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
+
+#ifdef NE8390_RW_BUGFIX
+ /* Handle the read-before-write bug the same way as the
+ Crynwr packet driver -- the NatSemi method doesn't work.
+ Actually this doesn't always work either, but if you have
+ problems with your NEx000 this is better than nothing! */
+ outb(0x42, nic_base + EN0_RCNTLO);
+ outb(0x00, nic_base + EN0_RCNTHI);
+ outb(0x42, nic_base + EN0_RSARLO);
+ outb(0x00, nic_base + EN0_RSARHI);
+ outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+#endif
+ outb(ENISR_RDC, nic_base + EN0_ISR);
+
+ /* Now the normal output. */
+ outb(count & 0xff, nic_base + EN0_RCNTLO);
+ outb(count >> 8, nic_base + EN0_RCNTHI);
+ outb(0x00, nic_base + EN0_RSARLO);
+ outb(start_page, nic_base + EN0_RSARHI);
+ outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
+ if (ei_status.ne2k_flags & ONLY_16BIT_IO) {
+ outsw(NE_BASE + NE_DATAPORT, buf, count>>1);
+ } else {
+ outsl(NE_BASE + NE_DATAPORT, buf, count>>2);
+ if (count & 3) {
+ buf += count & ~3;
+ if (count & 2) {
+ u16 *b = (u16 *)buf;
+
+ outw(cpu_to_le16(*b++), NE_BASE + NE_DATAPORT);
+ buf = (char *)b;
+ }
+ }
+ }
+
+ dma_start = jiffies;
+
+ while ((inb(nic_base + EN0_ISR) & ENISR_RDC) == 0)
+ if (jiffies - dma_start > 2) { /* Avoid clock roll-over. */
+ printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
+ ne2k_pci_reset_8390(dev);
+ NS8390_init(dev,1);
+ break;
+ }
+
+ outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
+ ei_status.dmaing &= ~0x01;
+ return;
+}
+
+static void ne2k_pci_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct ei_device *ei = dev->priv;
+ struct pci_dev *pci_dev = (struct pci_dev *) ei->priv;
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(pci_dev));
+}
+
+static struct ethtool_ops ne2k_pci_ethtool_ops = {
+ .get_drvinfo = ne2k_pci_get_drvinfo,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+};
+
+static void __devexit ne2k_pci_remove_one (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (!dev)
+ BUG();
+
+ unregister_netdev(dev);
+ release_region(dev->base_addr, NE_IO_EXTENT);
+ free_netdev(dev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int ne2k_pci_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+
+ netif_device_detach(dev);
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int ne2k_pci_resume (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata (pdev);
+
+ pci_set_power_state(pdev, 0);
+ pci_restore_state(pdev);
+ NS8390_init(dev, 1);
+ netif_device_attach(dev);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver ne2k_driver = {
+ .name = DRV_NAME,
+ .probe = ne2k_pci_init_one,
+ .remove = __devexit_p(ne2k_pci_remove_one),
+ .id_table = ne2k_pci_tbl,
+#ifdef CONFIG_PM
+ .suspend = ne2k_pci_suspend,
+ .resume = ne2k_pci_resume,
+#endif /* CONFIG_PM */
+
+};
+
+
+static int __init ne2k_pci_init(void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+ printk(version);
+#endif
+ return pci_module_init (&ne2k_driver);
+}
+
+
+static void __exit ne2k_pci_cleanup(void)
+{
+ pci_unregister_driver (&ne2k_driver);
+}
+
+module_init(ne2k_pci_init);
+module_exit(ne2k_pci_cleanup);