qlogic: Move the QLogic drivers

Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and
the necessary Kconfig and Makefile changes.

CC: Ron Mercer <ron.mercer@qlogic.com>
CC: Amit Kumar Salecha <amit.salecha@qlogic.com>
CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>

1 files changed, 0 insertions, 287 deletions

diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
deleted file mode 100644
index e2c5b6f2df0..00000000000
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Copyright (C) 2003 - 2009 NetXen, Inc.
- * Copyright (C) 2009 - QLogic Corporation.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called "COPYING".
- *
- */
-
-#ifndef __NETXEN_NIC_HW_H_
-#define __NETXEN_NIC_HW_H_
-
-/* Hardware memory size of 128 meg */
-#define NETXEN_MEMADDR_MAX (128 * 1024 * 1024)
-
-struct netxen_adapter;
-
-#define NETXEN_PCI_MAPSIZE_BYTES  (NETXEN_PCI_MAPSIZE << 20)
-
-void netxen_nic_set_link_parameters(struct netxen_adapter *adapter);
-
-/* Nibble or Byte mode for phy interface (GbE mode only) */
-
-#define _netxen_crb_get_bit(var, bit)  ((var >> bit) & 0x1)
-
-/*
- * NIU GB MAC Config Register 0 (applies to GB0, GB1, GB2, GB3)
- *
- *	Bit 0 : enable_tx => 1:enable frame xmit, 0:disable
- *	Bit 1 : tx_synced => R/O: xmit enable synched to xmit stream
- *	Bit 2 : enable_rx => 1:enable frame recv, 0:disable
- *	Bit 3 : rx_synced => R/O: recv enable synched to recv stream
- *	Bit 4 : tx_flowctl => 1:enable pause frame generation, 0:disable
- *	Bit 5 : rx_flowctl => 1:act on recv'd pause frames, 0:ignore
- *	Bit 8 : loopback => 1:loop MAC xmits to MAC recvs, 0:normal
- *	Bit 16: tx_reset_pb => 1:reset frame xmit protocol blk, 0:no-op
- *	Bit 17: rx_reset_pb => 1:reset frame recv protocol blk, 0:no-op
- *	Bit 18: tx_reset_mac => 1:reset data/ctl multiplexer blk, 0:no-op
- *	Bit 19: rx_reset_mac => 1:reset ctl frames & timers blk, 0:no-op
- *	Bit 31: soft_reset => 1:reset the MAC and the SERDES, 0:no-op
- */
-
-#define netxen_gb_tx_flowctl(config_word)	\
-	((config_word) |= 1 << 4)
-#define netxen_gb_rx_flowctl(config_word)	\
-	((config_word) |= 1 << 5)
-#define netxen_gb_tx_reset_pb(config_word)	\
-	((config_word) |= 1 << 16)
-#define netxen_gb_rx_reset_pb(config_word)	\
-	((config_word) |= 1 << 17)
-#define netxen_gb_tx_reset_mac(config_word)	\
-	((config_word) |= 1 << 18)
-#define netxen_gb_rx_reset_mac(config_word)	\
-	((config_word) |= 1 << 19)
-
-#define netxen_gb_unset_tx_flowctl(config_word)	\
-	((config_word) &= ~(1 << 4))
-#define netxen_gb_unset_rx_flowctl(config_word)	\
-	((config_word) &= ~(1 << 5))
-
-#define netxen_gb_get_tx_synced(config_word)	\
-		_netxen_crb_get_bit((config_word), 1)
-#define netxen_gb_get_rx_synced(config_word)	\
-		_netxen_crb_get_bit((config_word), 3)
-#define netxen_gb_get_tx_flowctl(config_word)	\
-		_netxen_crb_get_bit((config_word), 4)
-#define netxen_gb_get_rx_flowctl(config_word)	\
-		_netxen_crb_get_bit((config_word), 5)
-#define netxen_gb_get_soft_reset(config_word)	\
-		_netxen_crb_get_bit((config_word), 31)
-
-#define netxen_gb_get_stationaddress_low(config_word) ((config_word) >> 16)
-
-#define netxen_gb_set_mii_mgmt_clockselect(config_word, val)	\
-		((config_word) |= ((val) & 0x07))
-#define netxen_gb_mii_mgmt_reset(config_word)	\
-		((config_word) |= 1 << 31)
-#define netxen_gb_mii_mgmt_unset(config_word)	\
-		((config_word) &= ~(1 << 31))
-
-/*
- * NIU GB MII Mgmt Command Register (applies to GB0, GB1, GB2, GB3)
- * Bit 0 : read_cycle => 1:perform single read cycle, 0:no-op
- * Bit 1 : scan_cycle => 1:perform continuous read cycles, 0:no-op
- */
-
-#define netxen_gb_mii_mgmt_set_read_cycle(config_word)	\
-		((config_word) |= 1 << 0)
-#define netxen_gb_mii_mgmt_reg_addr(config_word, val)	\
-		((config_word) |= ((val) & 0x1F))
-#define netxen_gb_mii_mgmt_phy_addr(config_word, val)	\
-		((config_word) |= (((val) & 0x1F) << 8))
-
-/*
- * NIU GB MII Mgmt Indicators Register (applies to GB0, GB1, GB2, GB3)
- * Read-only register.
- * Bit 0 : busy => 1:performing an MII mgmt cycle, 0:idle
- * Bit 1 : scanning => 1:scan operation in progress, 0:idle
- * Bit 2 : notvalid => :mgmt result data not yet valid, 0:idle
- */
-#define netxen_get_gb_mii_mgmt_busy(config_word)	\
-		_netxen_crb_get_bit(config_word, 0)
-#define netxen_get_gb_mii_mgmt_scanning(config_word)	\
-		_netxen_crb_get_bit(config_word, 1)
-#define netxen_get_gb_mii_mgmt_notvalid(config_word)	\
-		_netxen_crb_get_bit(config_word, 2)
-/*
- * NIU XG Pause Ctl Register
- *
- *      Bit 0       : xg0_mask => 1:disable tx pause frames
- *      Bit 1       : xg0_request => 1:request single pause frame
- *      Bit 2       : xg0_on_off => 1:request is pause on, 0:off
- *      Bit 3       : xg1_mask => 1:disable tx pause frames
- *      Bit 4       : xg1_request => 1:request single pause frame
- *      Bit 5       : xg1_on_off => 1:request is pause on, 0:off
- */
-
-#define netxen_xg_set_xg0_mask(config_word)    \
-	((config_word) |= 1 << 0)
-#define netxen_xg_set_xg1_mask(config_word)    \
-	((config_word) |= 1 << 3)
-
-#define netxen_xg_get_xg0_mask(config_word)    \
-	_netxen_crb_get_bit((config_word), 0)
-#define netxen_xg_get_xg1_mask(config_word)    \
-	_netxen_crb_get_bit((config_word), 3)
-
-#define netxen_xg_unset_xg0_mask(config_word)  \
-	((config_word) &= ~(1 << 0))
-#define netxen_xg_unset_xg1_mask(config_word)  \
-	((config_word) &= ~(1 << 3))
-
-/*
- * NIU XG Pause Ctl Register
- *
- *      Bit 0       : xg0_mask => 1:disable tx pause frames
- *      Bit 1       : xg0_request => 1:request single pause frame
- *      Bit 2       : xg0_on_off => 1:request is pause on, 0:off
- *      Bit 3       : xg1_mask => 1:disable tx pause frames
- *      Bit 4       : xg1_request => 1:request single pause frame
- *      Bit 5       : xg1_on_off => 1:request is pause on, 0:off
- */
-#define netxen_gb_set_gb0_mask(config_word)    \
-	((config_word) |= 1 << 0)
-#define netxen_gb_set_gb1_mask(config_word)    \
-	((config_word) |= 1 << 2)
-#define netxen_gb_set_gb2_mask(config_word)    \
-	((config_word) |= 1 << 4)
-#define netxen_gb_set_gb3_mask(config_word)    \
-	((config_word) |= 1 << 6)
-
-#define netxen_gb_get_gb0_mask(config_word)    \
-	_netxen_crb_get_bit((config_word), 0)
-#define netxen_gb_get_gb1_mask(config_word)    \
-	_netxen_crb_get_bit((config_word), 2)
-#define netxen_gb_get_gb2_mask(config_word)    \
-	_netxen_crb_get_bit((config_word), 4)
-#define netxen_gb_get_gb3_mask(config_word)    \
-	_netxen_crb_get_bit((config_word), 6)
-
-#define netxen_gb_unset_gb0_mask(config_word)  \
-	((config_word) &= ~(1 << 0))
-#define netxen_gb_unset_gb1_mask(config_word)  \
-	((config_word) &= ~(1 << 2))
-#define netxen_gb_unset_gb2_mask(config_word)  \
-	((config_word) &= ~(1 << 4))
-#define netxen_gb_unset_gb3_mask(config_word)  \
-	((config_word) &= ~(1 << 6))
-
-
-/*
- * PHY-Specific MII control/status registers.
- */
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_CONTROL		0
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_STATUS		1
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_0		2
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_ID_1		3
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG		4
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART		5
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG_MORE	6
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_NEXTPAGE_XMIT	7
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_LNKPART_NEXTPAGE	8
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_CONTROL	9
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_1000BT_STATUS	10
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_EXTENDED_STATUS	15
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL		16
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS		17
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE		18
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS		19
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE	20
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_RECV_ERROR_COUNT	21
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_LED_CONTROL		24
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_LED_OVERRIDE	25
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_CONTROL_MORE_YET	26
-#define NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS_MORE	27
-
-/*
- * PHY-Specific Status Register (reg 17).
- *
- * Bit 0      : jabber => 1:jabber detected, 0:not
- * Bit 1      : polarity => 1:polarity reversed, 0:normal
- * Bit 2      : recvpause => 1:receive pause enabled, 0:disabled
- * Bit 3      : xmitpause => 1:transmit pause enabled, 0:disabled
- * Bit 4      : energydetect => 1:sleep, 0:active
- * Bit 5      : downshift => 1:downshift, 0:no downshift
- * Bit 6      : crossover => 1:MDIX (crossover), 0:MDI (no crossover)
- * Bits 7-9   : cablelen => not valid in 10Mb/s mode
- *			0:<50m, 1:50-80m, 2:80-110m, 3:110-140m, 4:>140m
- * Bit 10     : link => 1:link up, 0:link down
- * Bit 11     : resolved => 1:speed and duplex resolved, 0:not yet
- * Bit 12     : pagercvd => 1:page received, 0:page not received
- * Bit 13     : duplex => 1:full duplex, 0:half duplex
- * Bits 14-15 : speed => 0:10Mb/s, 1:100Mb/s, 2:1000Mb/s, 3:rsvd
- */
-
-#define netxen_get_phy_speed(config_word) (((config_word) >> 14) & 0x03)
-
-#define netxen_set_phy_speed(config_word, val)	\
-		((config_word) |= ((val & 0x03) << 14))
-#define netxen_set_phy_duplex(config_word)	\
-		((config_word) |= 1 << 13)
-#define netxen_clear_phy_duplex(config_word)	\
-		((config_word) &= ~(1 << 13))
-
-#define netxen_get_phy_link(config_word)	\
-		_netxen_crb_get_bit(config_word, 10)
-#define netxen_get_phy_duplex(config_word)	\
-		_netxen_crb_get_bit(config_word, 13)
-
-/*
- * NIU Mode Register.
- * Bit 0 : enable FibreChannel
- * Bit 1 : enable 10/100/1000 Ethernet
- * Bit 2 : enable 10Gb Ethernet
- */
-
-#define netxen_get_niu_enable_ge(config_word)	\
-		_netxen_crb_get_bit(config_word, 1)
-
-#define NETXEN_NIU_NON_PROMISC_MODE	0
-#define NETXEN_NIU_PROMISC_MODE		1
-#define NETXEN_NIU_ALLMULTI_MODE	2
-
-/*
- * NIU XG MAC Config Register
- *
- * Bit 0 : tx_enable => 1:enable frame xmit, 0:disable
- * Bit 2 : rx_enable => 1:enable frame recv, 0:disable
- * Bit 4 : soft_reset => 1:reset the MAC , 0:no-op
- * Bit 27: xaui_framer_reset
- * Bit 28: xaui_rx_reset
- * Bit 29: xaui_tx_reset
- * Bit 30: xg_ingress_afifo_reset
- * Bit 31: xg_egress_afifo_reset
- */
-
-#define netxen_xg_soft_reset(config_word)	\
-		((config_word) |= 1 << 4)
-
-typedef struct {
-	unsigned valid;
-	unsigned start_128M;
-	unsigned end_128M;
-	unsigned start_2M;
-} crb_128M_2M_sub_block_map_t;
-
-typedef struct {
-	crb_128M_2M_sub_block_map_t sub_block[16];
-} crb_128M_2M_block_map_t;
-
-#endif				/* __NETXEN_NIC_HW_H_ */