phylib: make local function static

The following functions are not used directly by any drivers:
    phy_attach_direct
    phy_device_create
    phy_prepare_link
    genphy_config_advert
    genphy_setup_forced
    phy_config_interrupt
    phy_clear_interrypt
    phy_sanitize_settings
    phy_enable_interrupts
    phy_disable_interrupts

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 15 insertions, 17 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 1bb16cb7943..7670aac0e93 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -65,7 +65,7 @@ EXPORT_SYMBOL(phy_print_status);
  *
  * Returns 0 on success on < 0 on error.
  */
-int phy_clear_interrupt(struct phy_device *phydev)
+static int phy_clear_interrupt(struct phy_device *phydev)
 {
 	int err = 0;
 
@@ -82,7 +82,7 @@ int phy_clear_interrupt(struct phy_device *phydev)
  *
  * Returns 0 on success on < 0 on error.
  */
-int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
+static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
 {
 	int err = 0;
 
@@ -208,7 +208,7 @@ static inline int phy_find_valid(int idx, u32 features)
  *   duplexes.  Drop down by one in this order:  1000/FULL,
  *   1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
  */
-void phy_sanitize_settings(struct phy_device *phydev)
+static void phy_sanitize_settings(struct phy_device *phydev)
 {
 	u32 features = phydev->supported;
 	int idx;
@@ -223,7 +223,6 @@ void phy_sanitize_settings(struct phy_device *phydev)
 	phydev->speed = settings[idx].speed;
 	phydev->duplex = settings[idx].duplex;
 }
-EXPORT_SYMBOL(phy_sanitize_settings);
 
 /**
  * phy_ethtool_sset - generic ethtool sset function, handles all the details
@@ -532,7 +531,7 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
  * phy_enable_interrupts - Enable the interrupts from the PHY side
  * @phydev: target phy_device struct
  */
-int phy_enable_interrupts(struct phy_device *phydev)
+static int phy_enable_interrupts(struct phy_device *phydev)
 {
 	int err;
 
@@ -545,13 +544,12 @@ int phy_enable_interrupts(struct phy_device *phydev)
 
 	return err;
 }
-EXPORT_SYMBOL(phy_enable_interrupts);
 
 /**
  * phy_disable_interrupts - Disable the PHY interrupts from the PHY side
  * @phydev: target phy_device struct
  */
-int phy_disable_interrupts(struct phy_device *phydev)
+static int phy_disable_interrupts(struct phy_device *phydev)
 {
 	int err;
 
@@ -574,7 +572,6 @@ phy_err:
 
 	return err;
 }
-EXPORT_SYMBOL(phy_disable_interrupts);
 
 /**
  * phy_start_interrupts - request and enable interrupts for a PHY device
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 16ddc77313c..993c52c82ae 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -57,6 +57,9 @@ extern void mdio_bus_exit(void);
 static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
 
+static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+			     u32 flags, phy_interface_t interface);
+
 /*
  * Creates a new phy_fixup and adds it to the list
  * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
@@ -146,7 +149,8 @@ int phy_scan_fixups(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_scan_fixups);
 
-struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+static struct phy_device* phy_device_create(struct mii_bus *bus,
+					    int addr, int phy_id)
 {
 	struct phy_device *dev;
 
@@ -193,7 +197,6 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
 
 	return dev;
 }
-EXPORT_SYMBOL(phy_device_create);
 
 /**
  * get_phy_id - reads the specified addr for its ID.
@@ -316,7 +319,7 @@ EXPORT_SYMBOL(phy_find_first);
  *   If you want to monitor your own link state, don't call
  *   this function.
  */
-void phy_prepare_link(struct phy_device *phydev,
+static void phy_prepare_link(struct phy_device *phydev,
 		void (*handler)(struct net_device *))
 {
 	phydev->adjust_link = handler;
@@ -435,8 +438,8 @@ int phy_init_hw(struct phy_device *phydev)
  *     the attaching device, and given a callback for link status
  *     change.  The phy_device is returned to the attaching driver.
  */
-int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
-		      u32 flags, phy_interface_t interface)
+static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+			     u32 flags, phy_interface_t interface)
 {
 	struct device *d = &phydev->dev;
 
@@ -473,7 +476,6 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	 * (dev_flags and interface) */
 	return phy_init_hw(phydev);
 }
-EXPORT_SYMBOL(phy_attach_direct);
 
 /**
  * phy_attach - attach a network device to a particular PHY device
@@ -540,7 +542,7 @@ EXPORT_SYMBOL(phy_detach);
  *   what is supported.  Returns < 0 on error, 0 if the PHY's advertisement
  *   hasn't changed, and > 0 if it has changed.
  */
-int genphy_config_advert(struct phy_device *phydev)
+static int genphy_config_advert(struct phy_device *phydev)
 {
 	u32 advertise;
 	int oldadv, adv;
@@ -605,7 +607,6 @@ int genphy_config_advert(struct phy_device *phydev)
 
 	return changed;
 }
-EXPORT_SYMBOL(genphy_config_advert);
 
 /**
  * genphy_setup_forced - configures/forces speed/duplex from @phydev
@@ -615,7 +616,7 @@ EXPORT_SYMBOL(genphy_config_advert);
  *   to the values in phydev. Assumes that the values are valid.
  *   Please see phy_sanitize_settings().
  */
-int genphy_setup_forced(struct phy_device *phydev)
+static int genphy_setup_forced(struct phy_device *phydev)
 {
 	int err;
 	int ctl = 0;