Merge branch 'next' into for-linus

5 files changed, 33 insertions, 21 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 35fda5ac812..392a6c4b72e 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -77,7 +77,6 @@ config NATIONAL_PHY
 	  Currently supports the DP83865 PHY.
 
 config STE10XP
-	depends on PHYLIB
 	tristate "Driver for STMicroelectronics STe10Xp PHYs"
 	---help---
 	  This is the driver for the STe100p and STe101p PHYs.
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index f62c7b717bc..47c8339a035 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -188,8 +188,7 @@ static int __devexit mdio_gpio_remove(struct platform_device *pdev)
 
 #ifdef CONFIG_OF_GPIO
 
-static int __devinit mdio_ofgpio_probe(struct platform_device *ofdev,
-                                        const struct of_device_id *match)
+static int __devinit mdio_ofgpio_probe(struct platform_device *ofdev)
 {
 	struct mdio_gpio_platform_data *pdata;
 	struct mii_bus *new_bus;
@@ -240,7 +239,7 @@ static struct of_device_id mdio_ofgpio_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mdio_ofgpio_match);
 
-static struct of_platform_driver mdio_ofgpio_driver = {
+static struct platform_driver mdio_ofgpio_driver = {
 	.driver = {
 		.name = "mdio-gpio",
 		.owner = THIS_MODULE,
@@ -252,12 +251,12 @@ static struct of_platform_driver mdio_ofgpio_driver = {
 
 static inline int __init mdio_ofgpio_init(void)
 {
-	return of_register_platform_driver(&mdio_ofgpio_driver);
+	return platform_driver_register(&mdio_ofgpio_driver);
 }
 
 static inline void __exit mdio_ofgpio_exit(void)
 {
-	of_unregister_platform_driver(&mdio_ofgpio_driver);
+	platform_driver_unregister(&mdio_ofgpio_driver);
 }
 #else
 static inline int __init mdio_ofgpio_init(void) { return 0; }
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 0fd1678bc5a..590f902deb6 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -19,13 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/phy.h>
-
-#define	PHY_ID_KSZ9021			0x00221611
-#define	PHY_ID_KS8737			0x00221720
-#define	PHY_ID_KS8041			0x00221510
-#define	PHY_ID_KS8051			0x00221550
-/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */
-#define	PHY_ID_KS8001			0x0022161A
+#include <linux/micrel_phy.h>
 
 /* general Interrupt control/status reg in vendor specific block. */
 #define MII_KSZPHY_INTCS			0x1B
@@ -46,6 +40,7 @@
 #define KSZPHY_CTRL_INT_ACTIVE_HIGH		(1 << 9)
 #define KSZ9021_CTRL_INT_ACTIVE_HIGH		(1 << 14)
 #define KS8737_CTRL_INT_ACTIVE_HIGH		(1 << 14)
+#define KSZ8051_RMII_50MHZ_CLK			(1 << 7)
 
 static int kszphy_ack_interrupt(struct phy_device *phydev)
 {
@@ -106,6 +101,19 @@ static int kszphy_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int ks8051_config_init(struct phy_device *phydev)
+{
+	int regval;
+
+	if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
+		regval = phy_read(phydev, MII_KSZPHY_CTRL);
+		regval |= KSZ8051_RMII_50MHZ_CLK;
+		phy_write(phydev, MII_KSZPHY_CTRL, regval);
+	}
+
+	return 0;
+}
+
 static struct phy_driver ks8737_driver = {
 	.phy_id		= PHY_ID_KS8737,
 	.phy_id_mask	= 0x00fffff0,
@@ -142,7 +150,7 @@ static struct phy_driver ks8051_driver = {
 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-	.config_init	= kszphy_config_init,
+	.config_init	= ks8051_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index a8445c72fc1..f7670330f98 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -319,7 +319,8 @@ int phy_mii_ioctl(struct phy_device *phydev,
 		/* fall through */
 
 	case SIOCGMIIREG:
-		mii_data->val_out = phy_read(phydev, mii_data->reg_num);
+		mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id,
+						 mii_data->reg_num);
 		break;
 
 	case SIOCSMIIREG:
@@ -350,8 +351,9 @@ int phy_mii_ioctl(struct phy_device *phydev,
 			}
 		}
 
-		phy_write(phydev, mii_data->reg_num, val);
-		
+		mdiobus_write(phydev->bus, mii_data->phy_id,
+			      mii_data->reg_num, val);
+
 		if (mii_data->reg_num == MII_BMCR &&
 		    val & BMCR_RESET &&
 		    phydev->drv->config_init) {
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 993c52c82ae..ff109fe5af6 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -442,11 +442,11 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 			     u32 flags, phy_interface_t interface)
 {
 	struct device *d = &phydev->dev;
+	int err;
 
 	/* Assume that if there is no driver, that it doesn't
 	 * exist, and we should use the genphy driver. */
 	if (NULL == d->driver) {
-		int err;
 		d->driver = &genphy_driver.driver;
 
 		err = d->driver->probe(d);
@@ -474,7 +474,11 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	/* Do initial configuration here, now that
 	 * we have certain key parameters
 	 * (dev_flags and interface) */
-	return phy_init_hw(phydev);
+	err = phy_init_hw(phydev);
+	if (err)
+		phy_detach(phydev);
+
+	return err;
 }
 
 /**
@@ -534,7 +538,7 @@ EXPORT_SYMBOL(phy_detach);
 /* Generic PHY support and helper functions */
 
 /**
- * genphy_config_advert - sanitize and advertise auto-negotation parameters
+ * genphy_config_advert - sanitize and advertise auto-negotiation parameters
  * @phydev: target phy_device struct
  *
  * Description: Writes MII_ADVERTISE with the appropriate values,
@@ -683,7 +687,7 @@ int genphy_config_aneg(struct phy_device *phydev)
 		return result;
 
 	if (result == 0) {
-		/* Advertisment hasn't changed, but maybe aneg was never on to
+		/* Advertisement hasn't changed, but maybe aneg was never on to
 		 * begin with?  Or maybe phy was isolated? */
 		int ctl = phy_read(phydev, MII_BMCR);