PS3: gelic: Add endianness macros

Mark the members of the structure for DMA descriptors with proper endian
annotations and use the appropriate accessor macros.
As the gelic driver works only on PS3, all these macros will be
expanded to null.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 39 insertions, 31 deletions

diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index f6fb556a0f5..81e77d3d780 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -98,7 +98,7 @@ gelic_net_get_descr_status(struct gelic_net_descr *descr)
 {
 	u32 cmd_status;
 
-	cmd_status = descr->dmac_cmd_status;
+	cmd_status = be32_to_cpu(descr->dmac_cmd_status);
 	cmd_status >>= GELIC_NET_DESCR_IND_PROC_SHIFT;
 	return cmd_status;
 }
@@ -117,13 +117,13 @@ static void gelic_net_set_descr_status(struct gelic_net_descr *descr,
 	u32 cmd_status;
 
 	/* read the status */
-	cmd_status = descr->dmac_cmd_status;
+	cmd_status = be32_to_cpu(descr->dmac_cmd_status);
 	/* clean the upper 4 bits */
 	cmd_status &= GELIC_NET_DESCR_IND_PROC_MASKO;
 	/* add the status to it */
 	cmd_status |= ((u32)status) << GELIC_NET_DESCR_IND_PROC_SHIFT;
 	/* and write it back */
-	descr->dmac_cmd_status = cmd_status;
+	descr->dmac_cmd_status = cpu_to_be32(cmd_status);
 	/*
 	 * dma_cmd_status field is used to indicate whether the descriptor
 	 * is valid or not.
@@ -193,7 +193,7 @@ static int gelic_net_init_chain(struct gelic_net_card *card,
 	/* chain bus addr of hw descriptor */
 	descr = start_descr;
 	for (i = 0; i < no; i++, descr++) {
-		descr->next_descr_addr = descr->next->bus_addr;
+		descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
 	}
 
 	chain->head = start_descr;
@@ -245,7 +245,7 @@ static int gelic_net_prepare_rx_descr(struct gelic_net_card *card,
 			 "%s:allocate skb failed !!\n", __func__);
 		return -ENOMEM;
 	}
-	descr->buf_size = bufsize;
+	descr->buf_size = cpu_to_be32(bufsize);
 	descr->dmac_cmd_status = 0;
 	descr->result_size = 0;
 	descr->valid_size = 0;
@@ -256,9 +256,10 @@ static int gelic_net_prepare_rx_descr(struct gelic_net_card *card,
 	if (offset)
 		skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
 	/* io-mmu-map the skb */
-	descr->buf_addr = dma_map_single(ctodev(card), descr->skb->data,
-					 GELIC_NET_MAX_MTU,
-					 DMA_FROM_DEVICE);
+	descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
+						     descr->skb->data,
+						     GELIC_NET_MAX_MTU,
+						     DMA_FROM_DEVICE));
 	if (!descr->buf_addr) {
 		dev_kfree_skb_any(descr->skb);
 		descr->skb = NULL;
@@ -284,7 +285,7 @@ static void gelic_net_release_rx_chain(struct gelic_net_card *card)
 	do {
 		if (descr->skb) {
 			dma_unmap_single(ctodev(card),
-					 descr->buf_addr,
+					 be32_to_cpu(descr->buf_addr),
 					 descr->skb->len,
 					 DMA_FROM_DEVICE);
 			descr->buf_addr = 0;
@@ -353,10 +354,11 @@ static void gelic_net_release_tx_descr(struct gelic_net_card *card,
 {
 	struct sk_buff *skb = descr->skb;
 
-	BUG_ON(!(descr->data_status & (1 << GELIC_NET_TXDESC_TAIL)));
+	BUG_ON(!(be32_to_cpu(descr->data_status) &
+		 (1 << GELIC_NET_TXDESC_TAIL)));
 
-	dma_unmap_single(ctodev(card), descr->buf_addr, skb->len,
-			 DMA_TO_DEVICE);
+	dma_unmap_single(ctodev(card),
+			 be32_to_cpu(descr->buf_addr), skb->len, DMA_TO_DEVICE);
 	dev_kfree_skb_any(skb);
 
 	descr->buf_addr = 0;
@@ -610,28 +612,29 @@ static void gelic_net_set_txdescr_cmdstat(struct gelic_net_descr *descr,
 					  struct sk_buff *skb)
 {
 	if (skb->ip_summed != CHECKSUM_PARTIAL)
-		descr->dmac_cmd_status = GELIC_NET_DMAC_CMDSTAT_NOCS |
-			GELIC_NET_DMAC_CMDSTAT_END_FRAME;
+		descr->dmac_cmd_status =
+			cpu_to_be32(GELIC_NET_DMAC_CMDSTAT_NOCS |
+				    GELIC_NET_DMAC_CMDSTAT_END_FRAME);
 	else {
 		/* is packet ip?
 		 * if yes: tcp? udp? */
 		if (skb->protocol == htons(ETH_P_IP)) {
 			if (ip_hdr(skb)->protocol == IPPROTO_TCP)
 				descr->dmac_cmd_status =
-					GELIC_NET_DMAC_CMDSTAT_TCPCS |
-					GELIC_NET_DMAC_CMDSTAT_END_FRAME;
+				cpu_to_be32(GELIC_NET_DMAC_CMDSTAT_TCPCS |
+					    GELIC_NET_DMAC_CMDSTAT_END_FRAME);
 
 			else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
 				descr->dmac_cmd_status =
-					GELIC_NET_DMAC_CMDSTAT_UDPCS |
-					GELIC_NET_DMAC_CMDSTAT_END_FRAME;
+				cpu_to_be32(GELIC_NET_DMAC_CMDSTAT_UDPCS |
+					    GELIC_NET_DMAC_CMDSTAT_END_FRAME);
 			else	/*
 				 * the stack should checksum non-tcp and non-udp
 				 * packets on his own: NETIF_F_IP_CSUM
 				 */
 				descr->dmac_cmd_status =
-					GELIC_NET_DMAC_CMDSTAT_NOCS |
-					GELIC_NET_DMAC_CMDSTAT_END_FRAME;
+				cpu_to_be32(GELIC_NET_DMAC_CMDSTAT_NOCS |
+					    GELIC_NET_DMAC_CMDSTAT_END_FRAME);
 		}
 	}
 }
@@ -694,8 +697,8 @@ static int gelic_net_prepare_tx_descr_v(struct gelic_net_card *card,
 		return -ENOMEM;
 	}
 
-	descr->buf_addr = buf;
-	descr->buf_size = skb->len;
+	descr->buf_addr = cpu_to_be32(buf);
+	descr->buf_size = cpu_to_be32(skb->len);
 	descr->skb = skb;
 	descr->data_status = 0;
 	descr->next_descr_addr = 0; /* terminate hw descr */
@@ -774,7 +777,7 @@ static int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 	 * link this prepared descriptor to previous one
 	 * to achieve high performance
 	 */
-	descr->prev->next_descr_addr = descr->bus_addr;
+	descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
 	/*
 	 * as hardware descriptor is modified in the above lines,
 	 * ensure that the hardware sees it
@@ -814,19 +817,23 @@ static void gelic_net_pass_skb_up(struct gelic_net_descr *descr,
 	struct net_device *netdev;
 	u32 data_status, data_error;
 
-	data_status = descr->data_status;
-	data_error = descr->data_error;
+	data_status = be32_to_cpu(descr->data_status);
+	data_error = be32_to_cpu(descr->data_error);
 	netdev = card->netdev;
 	/* unmap skb buffer */
 	skb = descr->skb;
-	dma_unmap_single(ctodev(card), descr->buf_addr, GELIC_NET_MAX_MTU,
+	dma_unmap_single(ctodev(card),
+			 be32_to_cpu(descr->buf_addr), GELIC_NET_MAX_MTU,
 			 DMA_FROM_DEVICE);
 
-	skb_put(skb, descr->valid_size? descr->valid_size : descr->result_size);
+	skb_put(skb, descr->valid_size ?
+		be32_to_cpu(descr->valid_size) :
+		be32_to_cpu(descr->result_size));
 	if (!descr->valid_size)
 		dev_info(ctodev(card), "buffer full %x %x %x\n",
-			 descr->result_size, descr->buf_size,
-			 descr->dmac_cmd_status);
+			 be32_to_cpu(descr->result_size),
+			 be32_to_cpu(descr->buf_size),
+			 be32_to_cpu(descr->dmac_cmd_status));
 
 	descr->skb = NULL;
 	/*
@@ -873,7 +880,8 @@ static int gelic_net_decode_one_descr(struct gelic_net_card *card)
 	status = gelic_net_get_descr_status(descr);
 	/* is this descriptor terminated with next_descr == NULL? */
 	dmac_chain_ended =
-		descr->dmac_cmd_status & GELIC_NET_DMAC_CMDSTAT_RXDCEIS;
+		be32_to_cpu(descr->dmac_cmd_status) &
+		GELIC_NET_DMAC_CMDSTAT_RXDCEIS;
 
 	if (status == GELIC_NET_DESCR_CARDOWNED)
 		return 0;
@@ -940,7 +948,7 @@ refill:
 	/*
 	 * Set this descriptor the end of the chain.
 	 */
-	descr->prev->next_descr_addr = descr->bus_addr;
+	descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
 
 	/*
 	 * If dmac chain was met, DMAC stopped.