[PATCH] s2io: performance improvements

hi,
	This patch contains all the changes that were done to improve
	performance of s2io driver. one line  description of the changes
	are

	1. For Non NAPI case the rx interrupt handler is being called
	   unconditionally
	2. code optimization and adding prefetch skb->data
	3. Remove modulo operations in fast path
	4. Enable Group Reads and set backoff interval to 0x1000
	5. correct PIC_CNTL_SHARED_SPLITS  macro definition, and reduce
	   pause parameter
	6. Corrected logic of identifying rx buffer level in rx_buffer_level()
	7. fix DMA map and unmap done with different sizes in 1-buf mode
	8. Removed forcible disabling of ERO
	9. Send up the packets with transfer code = 0x5

Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 74 insertions, 66 deletions

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 79208f434ac..84687315966 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -106,18 +106,14 @@ static inline int RXD_IS_UP2DT(RxD_t *rxdp)
 #define LOW	2
 static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring)
 {
-	int level = 0;
 	mac_info_t *mac_control;
 
 	mac_control = &sp->mac_control;
-	if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) {
-		level = LOW;
-		if (rxb_size <= rxd_count[sp->rxd_mode]) {
-			level = PANIC;
-		}
-	}
-
-	return level;
+	if (rxb_size <= rxd_count[sp->rxd_mode])
+		return PANIC;
+	else if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16)
+		return  LOW;
+	return 0;
 }
 
 /* Ethtool related variables and Macros. */
@@ -311,7 +307,7 @@ static unsigned int rts_frm_len[MAX_RX_RINGS] =
     {[0 ...(MAX_RX_RINGS - 1)] = 0 };
 static unsigned int rx_ring_mode = 1;
 static unsigned int use_continuous_tx_intrs = 1;
-static unsigned int rmac_pause_time = 65535;
+static unsigned int rmac_pause_time = 0x100;
 static unsigned int mc_pause_threshold_q0q3 = 187;
 static unsigned int mc_pause_threshold_q4q7 = 187;
 static unsigned int shared_splits;
@@ -1545,13 +1541,22 @@ static int init_nic(struct s2io_nic *nic)
 	val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
 	writeq(val64, &bar0->pic_control);
 
+	if (nic->config.bus_speed == 266) {
+		writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN, &bar0->txreqtimeout);
+		writeq(0x0, &bar0->read_retry_delay);
+		writeq(0x0, &bar0->write_retry_delay);
+	}
+
 	/*
 	 * Programming the Herc to split every write transaction
 	 * that does not start on an ADB to reduce disconnects.
 	 */
 	if (nic->device_type == XFRAME_II_DEVICE) {
-		val64 = WREQ_SPLIT_MASK_SET_MASK(255);
-		writeq(val64, &bar0->wreq_split_mask);
+		val64 = EXT_REQ_EN | MISC_LINK_STABILITY_PRD(3);
+		writeq(val64, &bar0->misc_control);
+		val64 = readq(&bar0->pic_control2);
+		val64 &= ~(BIT(13)|BIT(14)|BIT(15));
+		writeq(val64, &bar0->pic_control2);
 	}
 
 	/* Setting Link stability period to 64 ms */ 
@@ -1948,6 +1953,10 @@ static int start_nic(struct s2io_nic *nic)
 			val64 |= PRC_CTRL_RC_ENABLED;
 		else
 			val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
+		if (nic->device_type == XFRAME_II_DEVICE)
+			val64 |= PRC_CTRL_GROUP_READS;
+		val64 &= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF);
+		val64 |= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000);
 		writeq(val64, &bar0->prc_ctrl_n[i]);
 	}
 
@@ -2231,13 +2240,12 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 	alloc_cnt = mac_control->rings[ring_no].pkt_cnt -
 	    atomic_read(&nic->rx_bufs_left[ring_no]);
 
+	block_no1 = mac_control->rings[ring_no].rx_curr_get_info.block_index;
+	off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
 	while (alloc_tab < alloc_cnt) {
 		block_no = mac_control->rings[ring_no].rx_curr_put_info.
 		    block_index;
-		block_no1 = mac_control->rings[ring_no].rx_curr_get_info.
-		    block_index;
 		off = mac_control->rings[ring_no].rx_curr_put_info.offset;
-		off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
 
 		rxdp = mac_control->rings[ring_no].
 				rx_blocks[block_no].rxds[off].virt_addr;
@@ -2307,9 +2315,9 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 			memset(rxdp, 0, sizeof(RxD1_t));
 			skb_reserve(skb, NET_IP_ALIGN);
 			((RxD1_t*)rxdp)->Buffer0_ptr = pci_map_single
-			    (nic->pdev, skb->data, size, PCI_DMA_FROMDEVICE);
-			rxdp->Control_2 &= (~MASK_BUFFER0_SIZE_1);
-			rxdp->Control_2 |= SET_BUFFER0_SIZE_1(size);
+			    (nic->pdev, skb->data, size - NET_IP_ALIGN,
+				PCI_DMA_FROMDEVICE);
+			rxdp->Control_2 = SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
 
 		} else if (nic->rxd_mode >= RXD_MODE_3A) {
 			/*
@@ -2516,7 +2524,7 @@ static int s2io_poll(struct net_device *dev, int *budget)
 	mac_info_t *mac_control;
 	struct config_param *config;
 	XENA_dev_config_t __iomem *bar0 = nic->bar0;
-	u64 val64;
+	u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
 	int i;
 
 	atomic_inc(&nic->isr_cnt);
@@ -2528,8 +2536,8 @@ static int s2io_poll(struct net_device *dev, int *budget)
 		nic->pkts_to_process = dev->quota;
 	org_pkts_to_process = nic->pkts_to_process;
 
-	val64 = readq(&bar0->rx_traffic_int);
 	writeq(val64, &bar0->rx_traffic_int);
+	val64 = readl(&bar0->rx_traffic_int);
 
 	for (i = 0; i < config->rx_ring_num; i++) {
 		rx_intr_handler(&mac_control->rings[i]);
@@ -2666,6 +2674,7 @@ static void rx_intr_handler(ring_info_t *ring_data)
 					 ((RxD3_t*)rxdp)->Buffer2_ptr,
 					 dev->mtu, PCI_DMA_FROMDEVICE);
 		}
+		prefetch(skb->data);
 		rx_osm_handler(ring_data, rxdp);
 		get_info.offset++;
 		ring_data->rx_curr_get_info.offset = get_info.offset;
@@ -2760,7 +2769,8 @@ to loss of link\n");
 		dev_kfree_skb_irq(skb);
 
 		get_info.offset++;
-		get_info.offset %= get_info.fifo_len + 1;
+		if (get_info.offset == get_info.fifo_len + 1)
+			get_info.offset = 0;
 		txdlp = (TxD_t *) fifo_data->list_info
 		    [get_info.offset].list_virt_addr;
 		fifo_data->tx_curr_get_info.offset =
@@ -3545,7 +3555,8 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
 	/* Avoid "put" pointer going beyond "get" pointer */
-	if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) {
+	if (txdp->Host_Control ||
+		   ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
 		DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
 		netif_stop_queue(dev);
 		dev_kfree_skb(skb);
@@ -3655,11 +3666,12 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 	mmiowb();
 
 	put_off++;
-	put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
+	if (put_off == mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1)
+		put_off = 0;
 	mac_control->fifos[queue].tx_curr_put_info.offset = put_off;
 
 	/* Avoid "put" pointer going beyond "get" pointer */
-	if (((put_off + 1) % queue_len) == get_off) {
+	if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
 		DBG_PRINT(TX_DBG,
 			  "No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
 			  put_off, get_off);
@@ -3887,43 +3899,37 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
 		return IRQ_NONE;
 	}
 
+	val64 = 0xFFFFFFFFFFFFFFFFULL;
 #ifdef CONFIG_S2IO_NAPI
 	if (reason & GEN_INTR_RXTRAFFIC) {
 		if (netif_rx_schedule_prep(dev)) {
-			en_dis_able_nic_intrs(sp, RX_TRAFFIC_INTR,
-					      DISABLE_INTRS);
+			writeq(val64, &bar0->rx_traffic_mask);
 			__netif_rx_schedule(dev);
 		}
 	}
 #else
-	/* If Intr is because of Rx Traffic */
-	if (reason & GEN_INTR_RXTRAFFIC) {
-		/*
-		 * rx_traffic_int reg is an R1 register, writing all 1's
-		 * will ensure that the actual interrupt causing bit get's
-		 * cleared and hence a read can be avoided.
-		 */
-		val64 = 0xFFFFFFFFFFFFFFFFULL;
-		writeq(val64, &bar0->rx_traffic_int);
-		for (i = 0; i < config->rx_ring_num; i++) {
-			rx_intr_handler(&mac_control->rings[i]);
-		}
+	/*
+	 * Rx handler is called by default, without checking for the
+	 * cause of interrupt.
+	 * rx_traffic_int reg is an R1 register, writing all 1's
+	 * will ensure that the actual interrupt causing bit get's
+	 * cleared and hence a read can be avoided.
+	 */
+	writeq(val64, &bar0->rx_traffic_int);
+	for (i = 0; i < config->rx_ring_num; i++) {
+		rx_intr_handler(&mac_control->rings[i]);
 	}
 #endif
 
-	/* If Intr is because of Tx Traffic */
-	if (reason & GEN_INTR_TXTRAFFIC) {
-		/*
-		 * tx_traffic_int reg is an R1 register, writing all 1's
-		 * will ensure that the actual interrupt causing bit get's
-		 * cleared and hence a read can be avoided.
-		 */
-		val64 = 0xFFFFFFFFFFFFFFFFULL;
-		writeq(val64, &bar0->tx_traffic_int);
+	/*
+	 * tx_traffic_int reg is an R1 register, writing all 1's
+	 * will ensure that the actual interrupt causing bit get's
+	 * cleared and hence a read can be avoided.
+	 */
+	writeq(val64, &bar0->tx_traffic_int);
 
-		for (i = 0; i < config->tx_fifo_num; i++)
-			tx_intr_handler(&mac_control->fifos[i]);
-	}
+	for (i = 0; i < config->tx_fifo_num; i++)
+		tx_intr_handler(&mac_control->fifos[i]);
 
 	if (reason & GEN_INTR_TXPIC)
 		s2io_txpic_intr_handle(sp);
@@ -5695,18 +5701,27 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
 		((unsigned long) rxdp->Host_Control);
 	int ring_no = ring_data->ring_no;
 	u16 l3_csum, l4_csum;
+	unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
 	lro_t *lro;
 
 	skb->dev = dev;
-	if (rxdp->Control_1 & RXD_T_CODE) {
-		unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
-		DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
-			  dev->name, err);
-		dev_kfree_skb(skb);
-		sp->stats.rx_crc_errors++;
-		atomic_dec(&sp->rx_bufs_left[ring_no]);
-		rxdp->Host_Control = 0;
-		return 0;
+	if (err) {
+		/*
+		* Drop the packet if bad transfer code. Exception being
+		* 0x5, which could be due to unsupported IPv6 extension header.
+		* In this case, we let stack handle the packet.
+		* Note that in this case, since checksum will be incorrect,
+		* stack will validate the same.
+		*/
+		if (err && ((err >> 48) != 0x5)) {
+			DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
+				dev->name, err);
+			sp->stats.rx_crc_errors++;
+			dev_kfree_skb(skb);
+			atomic_dec(&sp->rx_bufs_left[ring_no]);
+			rxdp->Host_Control = 0;
+			return 0;
+		}
 	}
 
 	/* Updating statistics */
@@ -5918,13 +5933,6 @@ static void s2io_init_pci(nic_t * sp)
 	pci_write_config_word(sp->pdev, PCI_COMMAND,
 			      (pci_cmd | PCI_COMMAND_PARITY));
 	pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
-
-	/* Forcibly disabling relaxed ordering capability of the card. */
-	pcix_cmd &= 0xfffd;
-	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			      pcix_cmd);
-	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			     &(pcix_cmd));
 }
 
 MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>");