New driver "sfc" for Solarstorm SFC4000 controller.

The driver supports the 10Xpress PHY and XFP modules on our reference
designs SFE4001 and SFE4002 and the SMC models SMC10GPCIe-XFP and
SMC10GPCIe-10BT.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 232 insertions, 0 deletions

diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
new file mode 100644
index 00000000000..2214b6d820a
--- /dev/null
+++ b/drivers/net/sfc/mdio_10g.h
@@ -0,0 +1,232 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_MDIO_10G_H
+#define EFX_MDIO_10G_H
+
+/*
+ * Definitions needed for doing 10G MDIO as specified in clause 45
+ * MDIO, which do not appear in Linux yet. Also some helper functions.
+ */
+
+#include "efx.h"
+#include "boards.h"
+
+/* Numbering of the MDIO Manageable Devices (MMDs) */
+/* Physical Medium Attachment/ Physical Medium Dependent sublayer */
+#define MDIO_MMD_PMAPMD	(1)
+/* WAN Interface Sublayer */
+#define MDIO_MMD_WIS	(2)
+/* Physical Coding Sublayer */
+#define MDIO_MMD_PCS	(3)
+/* PHY Extender Sublayer */
+#define MDIO_MMD_PHYXS	(4)
+/* Extender Sublayer */
+#define MDIO_MMD_DTEXS	(5)
+/* Transmission convergence */
+#define MDIO_MMD_TC	(6)
+/* Auto negotiation */
+#define MDIO_MMD_AN	(7)
+
+/* Generic register locations */
+#define MDIO_MMDREG_CTRL1	(0)
+#define MDIO_MMDREG_STAT1	(1)
+#define MDIO_MMDREG_IDHI	(2)
+#define MDIO_MMDREG_IDLOW	(3)
+#define MDIO_MMDREG_SPEED	(4)
+#define MDIO_MMDREG_DEVS0	(5)
+#define MDIO_MMDREG_DEVS1	(6)
+#define MDIO_MMDREG_CTRL2	(7)
+#define MDIO_MMDREG_STAT2	(8)
+
+/* Bits in MMDREG_CTRL1 */
+/* Reset */
+#define MDIO_MMDREG_CTRL1_RESET_LBN	(15)
+#define MDIO_MMDREG_CTRL1_RESET_WIDTH	(1)
+
+/* Bits in MMDREG_STAT1 */
+#define MDIO_MMDREG_STAT1_FAULT_LBN	(7)
+#define MDIO_MMDREG_STAT1_FAULT_WIDTH	(1)
+/* Link state */
+#define MDIO_MMDREG_STAT1_LINK_LBN	(2)
+#define MDIO_MMDREG_STAT1_LINK_WIDTH	(1)
+
+/* Bits in ID reg */
+#define MDIO_ID_REV(_id32)	(_id32 & 0xf)
+#define MDIO_ID_MODEL(_id32)	((_id32 >> 4) & 0x3f)
+#define MDIO_ID_OUI(_id32)	(_id32 >> 10)
+
+/* Bits in MMDREG_DEVS0. Someone thoughtfully layed things out
+ * so the 'bit present' bit number of an MMD is the number of
+ * that MMD */
+#define DEV_PRESENT_BIT(_b) (1 << _b)
+
+#define MDIO_MMDREG_DEVS0_PHYXS	 DEV_PRESENT_BIT(MDIO_MMD_PHYXS)
+#define MDIO_MMDREG_DEVS0_PCS	 DEV_PRESENT_BIT(MDIO_MMD_PCS)
+#define MDIO_MMDREG_DEVS0_PMAPMD DEV_PRESENT_BIT(MDIO_MMD_PMAPMD)
+
+/* Bits in MMDREG_STAT2 */
+#define MDIO_MMDREG_STAT2_PRESENT_VAL	(2)
+#define MDIO_MMDREG_STAT2_PRESENT_LBN	(14)
+#define MDIO_MMDREG_STAT2_PRESENT_WIDTH (2)
+
+/* PMA type (4 bits) */
+#define MDIO_PMAPMD_CTRL2_10G_CX4	(0x0)
+#define MDIO_PMAPMD_CTRL2_10G_EW	(0x1)
+#define MDIO_PMAPMD_CTRL2_10G_LW	(0x2)
+#define MDIO_PMAPMD_CTRL2_10G_SW	(0x3)
+#define MDIO_PMAPMD_CTRL2_10G_LX4	(0x4)
+#define MDIO_PMAPMD_CTRL2_10G_ER	(0x5)
+#define MDIO_PMAPMD_CTRL2_10G_LR	(0x6)
+#define MDIO_PMAPMD_CTRL2_10G_SR	(0x7)
+/* Reserved */
+#define MDIO_PMAPMD_CTRL2_10G_BT	(0x9)
+/* Reserved */
+/* Reserved */
+#define MDIO_PMAPMD_CTRL2_1G_BT		(0xc)
+/* Reserved */
+#define MDIO_PMAPMD_CTRL2_100_BT	(0xe)
+#define MDIO_PMAPMD_CTRL2_10_BT		(0xf)
+#define MDIO_PMAPMD_CTRL2_TYPE_MASK	(0xf)
+
+/* /\* PHY XGXS lane state *\/ */
+#define MDIO_PHYXS_LANE_STATE		(0x18)
+#define MDIO_PHYXS_LANE_ALIGNED_LBN	(12)
+
+/* AN registers */
+#define MDIO_AN_STATUS			(1)
+#define MDIO_AN_STATUS_XNP_LBN		(7)
+#define MDIO_AN_STATUS_PAGE_LBN		(6)
+#define MDIO_AN_STATUS_AN_DONE_LBN	(5)
+#define MDIO_AN_STATUS_LP_AN_CAP_LBN	(0)
+
+#define MDIO_AN_10GBT_STATUS		(33)
+#define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */
+#define MDIO_AN_10GBT_STATUS_MS_LBN     (14) /* MASTER/SLAVE config */
+#define MDIO_AN_10GBT_STATUS_LOC_OK_LBN (13) /* Local OK */
+#define MDIO_AN_10GBT_STATUS_REM_OK_LBN (12) /* Remote OK */
+#define MDIO_AN_10GBT_STATUS_LP_10G_LBN (11) /* Link partner is 10GBT capable */
+#define MDIO_AN_10GBT_STATUS_LP_LTA_LBN (10) /* LP loop timing ability */
+#define MDIO_AN_10GBT_STATUS_LP_TRR_LBN (9)  /* LP Training Reset Request */
+
+
+/* Packing of the prt and dev arguments of clause 45 style MDIO into a
+ * single int so they can be passed into the mdio_read/write functions
+ * that currently exist. Note that as Falcon is the only current user,
+ * the packed form is chosen to match what Falcon needs to write into
+ * a register. This is checked at compile-time so do not change it. If
+ * your target chip needs things layed out differently you will need
+ * to unpack the arguments in your chip-specific mdio functions.
+ */
+ /* These are defined by the standard. */
+#define MDIO45_PRT_ID_WIDTH  (5)
+#define MDIO45_DEV_ID_WIDTH  (5)
+
+/* The prt ID is just packed in immediately to the left of the dev ID */
+#define MDIO45_PRT_DEV_WIDTH (MDIO45_PRT_ID_WIDTH + MDIO45_DEV_ID_WIDTH)
+
+#define MDIO45_PRT_ID_MASK   ((1 << MDIO45_PRT_DEV_WIDTH) - 1)
+/* This is the prt + dev extended by 1 bit to hold the 'is clause 45' flag. */
+#define MDIO45_XPRT_ID_WIDTH   (MDIO45_PRT_DEV_WIDTH + 1)
+#define MDIO45_XPRT_ID_MASK   ((1 << MDIO45_XPRT_ID_WIDTH) - 1)
+#define MDIO45_XPRT_ID_IS10G   (1 << (MDIO45_XPRT_ID_WIDTH - 1))
+
+
+#define MDIO45_PRT_ID_COMP_LBN   MDIO45_DEV_ID_WIDTH
+#define MDIO45_PRT_ID_COMP_WIDTH  MDIO45_PRT_ID_WIDTH
+#define MDIO45_DEV_ID_COMP_LBN    0
+#define MDIO45_DEV_ID_COMP_WIDTH  MDIO45_DEV_ID_WIDTH
+
+/* Compose port and device into a phy_id */
+static inline int mdio_clause45_pack(u8 prt, u8 dev)
+{
+	efx_dword_t phy_id;
+	EFX_POPULATE_DWORD_2(phy_id, MDIO45_PRT_ID_COMP, prt,
+			     MDIO45_DEV_ID_COMP, dev);
+	return MDIO45_XPRT_ID_IS10G | EFX_DWORD_VAL(phy_id);
+}
+
+static inline void mdio_clause45_unpack(u32 val, u8 *prt, u8 *dev)
+{
+	efx_dword_t phy_id;
+	EFX_POPULATE_DWORD_1(phy_id, EFX_DWORD_0, val);
+	*prt = EFX_DWORD_FIELD(phy_id, MDIO45_PRT_ID_COMP);
+	*dev = EFX_DWORD_FIELD(phy_id, MDIO45_DEV_ID_COMP);
+}
+
+static inline int mdio_clause45_read(struct efx_nic *efx,
+				     u8 prt, u8 dev, u16 addr)
+{
+	return efx->mii.mdio_read(efx->net_dev,
+				  mdio_clause45_pack(prt, dev), addr);
+}
+
+static inline void mdio_clause45_write(struct efx_nic *efx,
+				       u8 prt, u8 dev, u16 addr, int value)
+{
+	efx->mii.mdio_write(efx->net_dev,
+			    mdio_clause45_pack(prt, dev), addr, value);
+}
+
+
+static inline u32 mdio_clause45_read_id(struct efx_nic *efx, int mmd)
+{
+	int phy_id = efx->mii.phy_id;
+	u16 id_low = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDLOW);
+	u16 id_hi = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDHI);
+	return (id_hi << 16) | (id_low);
+}
+
+static inline int mdio_clause45_phyxgxs_lane_sync(struct efx_nic *efx)
+{
+	int i, sync, lane_status;
+
+	for (i = 0; i < 2; ++i)
+		lane_status = mdio_clause45_read(efx, efx->mii.phy_id,
+						 MDIO_MMD_PHYXS,
+						 MDIO_PHYXS_LANE_STATE);
+
+	sync = (lane_status & (1 << MDIO_PHYXS_LANE_ALIGNED_LBN)) != 0;
+	if (!sync)
+		EFX_INFO(efx, "XGXS lane status: %x\n", lane_status);
+	return sync;
+}
+
+extern const char *mdio_clause45_mmd_name(int mmd);
+
+/*
+ * Reset a specific MMD and wait for reset to clear.
+ * Return number of spins left (>0) on success, -%ETIMEDOUT on failure.
+ *
+ * This function will sleep
+ */
+extern int mdio_clause45_reset_mmd(struct efx_nic *efx, int mmd,
+				   int spins, int spintime);
+
+/* As mdio_clause45_check_mmd but for multiple MMDs */
+int mdio_clause45_check_mmds(struct efx_nic *efx,
+			     unsigned int mmd_mask, unsigned int fatal_mask);
+
+/* Check the link status of specified mmds in bit mask */
+extern int mdio_clause45_links_ok(struct efx_nic *efx,
+				  unsigned int mmd_mask);
+
+/* Read (some of) the PHY settings over MDIO */
+extern void mdio_clause45_get_settings(struct efx_nic *efx,
+				       struct ethtool_cmd *ecmd);
+
+/* Set (some of) the PHY settings over MDIO */
+extern int mdio_clause45_set_settings(struct efx_nic *efx,
+				      struct ethtool_cmd *ecmd);
+
+/* Wait for specified MMDs to exit reset within a timeout */
+extern int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
+					 unsigned int mmd_mask);
+
+#endif /* EFX_MDIO_10G_H */