diff options
| author | Stephen Hemminger <shemminger@vyatta.com> | 2008-11-19 21:59:54 -0800 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2008-11-19 22:42:44 -0800 |
| commit | 1436b301ec2b184fc01dc29fa22d1fbac619b491 (patch) | |
| tree | 3f99df66c5d1e273231368e9c55ceac269a6eeac /drivers/net/sky2.c | |
| parent | 651c24669316b955c3c7797bd535cdaa4533cb16 (diff) | |
sky2: convert to net_device_ops
Convert to new network device ops interface. Slight additional complexity
here because the second port does not allow netpoll and therefore has
different virtual function table.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/sky2.c')
| -rw-r--r-- | drivers/net/sky2.c | 48 |
1 files changed, 35 insertions, 13 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 4dcd1a62fb4..251505125cb 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -3979,7 +3979,7 @@ static int sky2_device_event(struct notifier_block *unused, struct net_device *dev = ptr; struct sky2_port *sky2 = netdev_priv(dev); - if (dev->open != sky2_up || !sky2_debug) + if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug) return NOTIFY_DONE; switch(event) { @@ -4041,6 +4041,39 @@ static __exit void sky2_debug_cleanup(void) #define sky2_debug_cleanup() #endif +/* Two copies of network device operations to handle special case of + not allowing netpoll on second port */ +static const struct net_device_ops sky2_netdev_ops[2] = { + { + .ndo_open = sky2_up, + .ndo_stop = sky2_down, + .ndo_do_ioctl = sky2_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = sky2_set_mac_address, + .ndo_set_multicast_list = sky2_set_multicast, + .ndo_change_mtu = sky2_change_mtu, + .ndo_tx_timeout = sky2_tx_timeout, +#ifdef SKY2_VLAN_TAG_USED + .ndo_vlan_rx_register = sky2_vlan_rx_register, +#endif +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = sky2_netpoll, +#endif + }, + { + .ndo_open = sky2_up, + .ndo_stop = sky2_down, + .ndo_do_ioctl = sky2_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = sky2_set_mac_address, + .ndo_set_multicast_list = sky2_set_multicast, + .ndo_change_mtu = sky2_change_mtu, + .ndo_tx_timeout = sky2_tx_timeout, +#ifdef SKY2_VLAN_TAG_USED + .ndo_vlan_rx_register = sky2_vlan_rx_register, +#endif + }, +}; /* Initialize network device */ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, @@ -4057,20 +4090,10 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, SET_NETDEV_DEV(dev, &hw->pdev->dev); dev->irq = hw->pdev->irq; - dev->open = sky2_up; - dev->stop = sky2_down; - dev->do_ioctl = sky2_ioctl; dev->hard_start_xmit = sky2_xmit_frame; - dev->set_multicast_list = sky2_set_multicast; - dev->set_mac_address = sky2_set_mac_address; - dev->change_mtu = sky2_change_mtu; SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops); - dev->tx_timeout = sky2_tx_timeout; dev->watchdog_timeo = TX_WATCHDOG; -#ifdef CONFIG_NET_POLL_CONTROLLER - if (port == 0) - dev->poll_controller = sky2_netpoll; -#endif + dev->netdev_ops = &sky2_netdev_ops[port]; sky2 = netdev_priv(dev); sky2->netdev = dev; @@ -4104,7 +4127,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P && sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) { dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; - dev->vlan_rx_register = sky2_vlan_rx_register; } #endif |