Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1786 insertions, 0 deletions

diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
new file mode 100644
index 00000000000..9e7923192a4
--- /dev/null
+++ b/drivers/net/tokenring/olympic.c
@@ -0,0 +1,1786 @@
+/*
+ *   olympic.c (c) 1999 Peter De Schrijver All Rights Reserved
+ *		   1999/2000 Mike Phillips (mikep@linuxtr.net)
+ *
+ *  Linux driver for IBM PCI tokenring cards based on the Pit/Pit-Phy/Olympic
+ *  chipset. 
+ *
+ *  Base Driver Skeleton:
+ *      Written 1993-94 by Donald Becker.
+ *
+ *      Copyright 1993 United States Government as represented by the
+ *      Director, National Security Agency.
+ *
+ *  Thanks to Erik De Cock, Adrian Bridgett and Frank Fiene for their 
+ *  assistance and perserverance with the testing of this driver.
+ *
+ *  This software may be used and distributed according to the terms
+ *  of the GNU General Public License, incorporated herein by reference.
+ * 
+ *  4/27/99 - Alpha Release 0.1.0
+ *            First release to the public
+ *
+ *  6/8/99  - Official Release 0.2.0   
+ *            Merged into the kernel code 
+ *  8/18/99 - Updated driver for 2.3.13 kernel to use new pci
+ *	      resource. Driver also reports the card name returned by
+ *            the pci resource.
+ *  1/11/00 - Added spinlocks for smp
+ *  2/23/00 - Updated to dev_kfree_irq 
+ *  3/10/00 - Fixed FDX enable which triggered other bugs also 
+ *            squashed.
+ *  5/20/00 - Changes to handle Olympic on LinuxPPC. Endian changes.
+ *            The odd thing about the changes is that the fix for
+ *            endian issues with the big-endian data in the arb, asb...
+ *            was to always swab() the bytes, no matter what CPU.
+ *            That's because the read[wl]() functions always swap the
+ *            bytes on the way in on PPC.
+ *            Fixing the hardware descriptors was another matter,
+ *            because they weren't going through read[wl](), there all
+ *            the results had to be in memory in le32 values. kdaaker
+ *
+ * 12/23/00 - Added minimal Cardbus support (Thanks Donald).
+ *
+ * 03/09/01 - Add new pci api, dev_base_lock, general clean up. 
+ *
+ * 03/27/01 - Add new dma pci (Thanks to Kyle Lucke) and alloc_trdev
+ *	      Change proc_fs behaviour, now one entry per adapter.
+ *
+ * 04/09/01 - Couple of bug fixes to the dma unmaps and ejecting the
+ *	      adapter when live does not take the system down with it.
+ * 
+ * 06/02/01 - Clean up, copy skb for small packets
+ * 
+ * 06/22/01 - Add EISR error handling routines 
+ *
+ * 07/19/01 - Improve bad LAA reporting, strip out freemem
+ *	      into a separate function, its called from 3 
+ *	      different places now. 
+ * 02/09/02 - Replaced sleep_on. 
+ * 03/01/02 - Replace access to several registers from 32 bit to 
+ * 	      16 bit. Fixes alignment errors on PPC 64 bit machines.
+ * 	      Thanks to Al Trautman for this one.
+ * 03/10/02 - Fix BUG in arb_cmd. Bug was there all along but was
+ * 	      silently ignored until the error checking code 
+ * 	      went into version 1.0.0 
+ * 06/04/02 - Add correct start up sequence for the cardbus adapters.
+ * 	      Required for strict compliance with pci power mgmt specs.
+ *  To Do:
+ *
+ *	     Wake on lan	
+ * 
+ *  If Problems do Occur
+ *  Most problems can be rectified by either closing and opening the interface
+ *  (ifconfig down and up) or rmmod and insmod'ing the driver (a bit difficult
+ *  if compiled into the kernel).
+ */
+
+/* Change OLYMPIC_DEBUG to 1 to get verbose, and I mean really verbose, messages */
+
+#define OLYMPIC_DEBUG 0
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/proc_fs.h>
+#include <linux/ptrace.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/trdevice.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+
+#include <net/checksum.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include "olympic.h"
+
+/* I've got to put some intelligence into the version number so that Peter and I know
+ * which version of the code somebody has got. 
+ * Version Number = a.b.c.d  where a.b.c is the level of code and d is the latest author.
+ * So 0.0.1.pds = Peter, 0.0.1.mlp = Mike
+ * 
+ * Official releases will only have an a.b.c version number format. 
+ */
+
+static char version[] __devinitdata = 
+"Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips" ; 
+
+static char *open_maj_error[]  = {"No error", "Lobe Media Test", "Physical Insertion",
+				   "Address Verification", "Neighbor Notification (Ring Poll)",
+				   "Request Parameters","FDX Registration Request",
+				   "FDX Duplicate Address Check", "Station registration Query Wait",
+				   "Unknown stage"};
+
+static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost", "Wire Fault",
+				   "Ring Speed Mismatch", "Timeout","Ring Failure","Ring Beaconing",
+				   "Duplicate Node Address","Request Parameters","Remove Received",
+				   "Reserved", "Reserved", "No Monitor Detected for RPL", 
+				   "Monitor Contention failer for RPL", "FDX Protocol Error"};
+
+/* Module paramters */
+
+MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; 
+MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ; 
+
+/* Ring Speed 0,4,16,100 
+ * 0 = Autosense         
+ * 4,16 = Selected speed only, no autosense
+ * This allows the card to be the first on the ring
+ * and become the active monitor.
+ * 100 = Nothing at present, 100mbps is autodetected
+ * if FDX is turned on. May be implemented in the future to 
+ * fail if 100mpbs is not detected.
+ *
+ * WARNING: Some hubs will allow you to insert
+ * at the wrong speed
+ */
+
+static int ringspeed[OLYMPIC_MAX_ADAPTERS] = {0,} ;
+module_param_array(ringspeed, int, NULL, 0);
+
+/* Packet buffer size */
+
+static int pkt_buf_sz[OLYMPIC_MAX_ADAPTERS] = {0,} ;
+module_param_array(pkt_buf_sz, int, NULL, 0) ;
+
+/* Message Level */
+
+static int message_level[OLYMPIC_MAX_ADAPTERS] = {0,} ; 
+module_param_array(message_level, int, NULL, 0) ;
+
+/* Change network_monitor to receive mac frames through the arb channel.
+ * Will also create a /proc/net/olympic_tr%d entry, where %d is the tr
+ * device, i.e. tr0, tr1 etc. 
+ * Intended to be used to create a ring-error reporting network module 
+ * i.e. it will give you the source address of beaconers on the ring 
+ */
+static int network_monitor[OLYMPIC_MAX_ADAPTERS] = {0,};
+module_param_array(network_monitor, int, NULL, 0);
+
+static struct pci_device_id olympic_pci_tbl[] = {
+	{PCI_VENDOR_ID_IBM,PCI_DEVICE_ID_IBM_TR_WAKE,PCI_ANY_ID,PCI_ANY_ID,},
+	{ } 	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(pci,olympic_pci_tbl) ; 
+
+
+static int olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent); 
+static int olympic_init(struct net_device *dev);
+static int olympic_open(struct net_device *dev);
+static int olympic_xmit(struct sk_buff *skb, struct net_device *dev);
+static int olympic_close(struct net_device *dev);
+static void olympic_set_rx_mode(struct net_device *dev);
+static void olympic_freemem(struct net_device *dev) ;  
+static irqreturn_t olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static struct net_device_stats * olympic_get_stats(struct net_device *dev);
+static int olympic_set_mac_address(struct net_device *dev, void *addr) ; 
+static void olympic_arb_cmd(struct net_device *dev);
+static int olympic_change_mtu(struct net_device *dev, int mtu);
+static void olympic_srb_bh(struct net_device *dev) ; 
+static void olympic_asb_bh(struct net_device *dev) ; 
+static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data) ; 
+
+static int __devinit olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct net_device *dev ; 
+	struct olympic_private *olympic_priv;
+	static int card_no = -1 ;
+	int i ; 
+
+	card_no++ ; 
+
+	if ((i = pci_enable_device(pdev))) {
+		return i ; 
+	}
+
+	pci_set_master(pdev);
+
+	if ((i = pci_request_regions(pdev,"olympic"))) { 
+		goto op_disable_dev;
+	}
+ 
+	dev = alloc_trdev(sizeof(struct olympic_private)) ; 
+	if (!dev) {
+		i = -ENOMEM; 
+		goto op_free_dev;
+	}
+
+	olympic_priv = dev->priv ;
+	
+	spin_lock_init(&olympic_priv->olympic_lock) ; 
+
+	init_waitqueue_head(&olympic_priv->srb_wait);
+	init_waitqueue_head(&olympic_priv->trb_wait);
+#if OLYMPIC_DEBUG  
+	printk(KERN_INFO "pci_device: %p, dev:%p, dev->priv: %p\n", pdev, dev, dev->priv);
+#endif
+	dev->irq=pdev->irq;
+	dev->base_addr=pci_resource_start(pdev, 0);
+	olympic_priv->olympic_card_name = pci_name(pdev);
+	olympic_priv->pdev = pdev; 
+	olympic_priv->olympic_mmio = ioremap(pci_resource_start(pdev,1),256);
+	olympic_priv->olympic_lap = ioremap(pci_resource_start(pdev,2),2048);
+	if (!olympic_priv->olympic_mmio || !olympic_priv->olympic_lap) {
+		goto op_free_iomap;
+	}
+				
+	if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) )
+		olympic_priv->pkt_buf_sz = PKT_BUF_SZ ; 
+	else
+		olympic_priv->pkt_buf_sz = pkt_buf_sz[card_no] ; 
+
+	dev->mtu = olympic_priv->pkt_buf_sz - TR_HLEN ; 
+	olympic_priv->olympic_ring_speed = ringspeed[card_no] ; 
+	olympic_priv->olympic_message_level = message_level[card_no] ; 
+	olympic_priv->olympic_network_monitor = network_monitor[card_no];
+	
+	if ((i = olympic_init(dev))) {
+		goto op_free_iomap;
+	}				
+
+	dev->open=&olympic_open;
+	dev->hard_start_xmit=&olympic_xmit;
+	dev->change_mtu=&olympic_change_mtu;
+	dev->stop=&olympic_close;
+	dev->do_ioctl=NULL;
+	dev->set_multicast_list=&olympic_set_rx_mode;
+	dev->get_stats=&olympic_get_stats ;
+	dev->set_mac_address=&olympic_set_mac_address ;  
+	SET_MODULE_OWNER(dev) ; 
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	pci_set_drvdata(pdev,dev) ; 
+	register_netdev(dev) ; 
+	printk("Olympic: %s registered as: %s\n",olympic_priv->olympic_card_name,dev->name);
+	if (olympic_priv->olympic_network_monitor) { /* Must go after register_netdev as we need the device name */ 
+		char proc_name[20] ; 
+		strcpy(proc_name,"net/olympic_") ; 
+		strcat(proc_name,dev->name) ; 
+		create_proc_read_entry(proc_name,0,NULL,olympic_proc_info,(void *)dev) ; 
+		printk("Olympic: Network Monitor information: /proc/%s\n",proc_name); 
+	}
+	return  0 ;
+
+op_free_iomap:
+	if (olympic_priv->olympic_mmio)
+		iounmap(olympic_priv->olympic_mmio); 
+	if (olympic_priv->olympic_lap)
+		iounmap(olympic_priv->olympic_lap);
+
+op_free_dev:
+	free_netdev(dev);
+	pci_release_regions(pdev); 
+
+op_disable_dev:
+	pci_disable_device(pdev);
+	return i;
+}
+
+static int __devinit olympic_init(struct net_device *dev)
+{
+    	struct olympic_private *olympic_priv;
+	u8 __iomem *olympic_mmio, *init_srb,*adapter_addr;
+	unsigned long t; 
+	unsigned int uaa_addr;
+
+    	olympic_priv=(struct olympic_private *)dev->priv;
+	olympic_mmio=olympic_priv->olympic_mmio;
+
+	printk("%s \n", version);
+	printk("%s. I/O at %hx, MMIO at %p, LAP at %p, using irq %d\n", olympic_priv->olympic_card_name, (unsigned int) dev->base_addr,olympic_priv->olympic_mmio, olympic_priv->olympic_lap, dev->irq);
+
+	writel(readl(olympic_mmio+BCTL) | BCTL_SOFTRESET,olympic_mmio+BCTL);
+	t=jiffies;
+	while((readl(olympic_mmio+BCTL)) & BCTL_SOFTRESET) {
+		schedule();		
+		if(jiffies-t > 40*HZ) {
+			printk(KERN_ERR "IBM PCI tokenring card not responding.\n");
+			return -ENODEV;
+		}
+	}
+
+
+	/* Needed for cardbus */
+	if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) {
+		writel(readl(olympic_priv->olympic_mmio+FERMASK)|FERMASK_INT_BIT, olympic_mmio+FERMASK);
+	}
+	
+#if OLYMPIC_DEBUG
+	printk("BCTL: %x\n",readl(olympic_mmio+BCTL));
+	printk("GPR: %x\n",readw(olympic_mmio+GPR));
+	printk("SISRMASK: %x\n",readl(olympic_mmio+SISR_MASK));
+#endif
+	/* Aaaahhh, You have got to be real careful setting GPR, the card
+	   holds the previous values from flash memory, including autosense 
+           and ring speed */
+
+	writel(readl(olympic_mmio+BCTL)|BCTL_MIMREB,olympic_mmio+BCTL);
+	
+	if (olympic_priv->olympic_ring_speed  == 0) { /* Autosense */
+		writew(readw(olympic_mmio+GPR)|GPR_AUTOSENSE,olympic_mmio+GPR);
+		if (olympic_priv->olympic_message_level) 
+			printk(KERN_INFO "%s: Ringspeed autosense mode on\n",olympic_priv->olympic_card_name);
+	} else if (olympic_priv->olympic_ring_speed == 16) {
+		if (olympic_priv->olympic_message_level) 
+			printk(KERN_INFO "%s: Trying to open at 16 Mbps as requested\n", olympic_priv->olympic_card_name);
+		writew(GPR_16MBPS, olympic_mmio+GPR);
+	} else if (olympic_priv->olympic_ring_speed == 4) {
+		if (olympic_priv->olympic_message_level) 
+			printk(KERN_INFO "%s: Trying to open at 4 Mbps as requested\n", olympic_priv->olympic_card_name) ; 
+		writew(0, olympic_mmio+GPR);
+	} 
+	
+	writew(readw(olympic_mmio+GPR)|GPR_NEPTUNE_BF,olympic_mmio+GPR);
+
+#if OLYMPIC_DEBUG
+	printk("GPR = %x\n",readw(olympic_mmio + GPR) ) ; 
+#endif
+	/* Solo has been paused to meet the Cardbus power
+	 * specs if the adapter is cardbus. Check to 
+	 * see its been paused and then restart solo. The
+	 * adapter should set the pause bit within 1 second.
+	 */
+
+	if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) { 
+		t=jiffies;
+		while (!readl(olympic_mmio+CLKCTL) & CLKCTL_PAUSE) { 
+			schedule() ; 
+			if(jiffies-t > 2*HZ) { 
+				printk(KERN_ERR "IBM Cardbus tokenring adapter not responsing.\n") ; 
+				return -ENODEV;
+			}
+		}
+		writel(readl(olympic_mmio+CLKCTL) & ~CLKCTL_PAUSE, olympic_mmio+CLKCTL) ; 
+	}
+	
+	/* start solo init */
+	writel((1<<15),olympic_mmio+SISR_MASK_SUM);
+
+	t=jiffies;
+	while(!((readl(olympic_mmio+SISR_RR)) & SISR_SRB_REPLY)) {
+		schedule();		
+		if(jiffies-t > 15*HZ) {
+			printk(KERN_ERR "IBM PCI tokenring card not responding.\n");
+			return -ENODEV;
+		}
+	}
+	
+	writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA);
+
+#if OLYMPIC_DEBUG
+	printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA));
+#endif
+
+	init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800));
+
+#if OLYMPIC_DEBUG		
+{
+	int i;
+	printk("init_srb(%p): ",init_srb);
+	for(i=0;i<20;i++)
+		printk("%x ",readb(init_srb+i));
+	printk("\n");
+}
+#endif	
+	if(readw(init_srb+6)) {
+		printk(KERN_INFO "tokenring card initialization failed. errorcode : %x\n",readw(init_srb+6));
+		return -ENODEV;
+	}
+
+	if (olympic_priv->olympic_message_level) {
+		if ( readb(init_srb +2) & 0x40) { 
+			printk(KERN_INFO "Olympic: Adapter is FDX capable.\n") ;
+		} else { 
+			printk(KERN_INFO "Olympic: Adapter cannot do FDX.\n");
+		}
+	}
+  
+	uaa_addr=swab16(readw(init_srb+8));
+
+#if OLYMPIC_DEBUG
+	printk("UAA resides at %x\n",uaa_addr);
+#endif
+
+	writel(uaa_addr,olympic_mmio+LAPA);
+	adapter_addr=olympic_priv->olympic_lap + (uaa_addr & (~0xf800));
+
+#if OLYMPIC_DEBUG
+	printk("adapter address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+			readb(adapter_addr), readb(adapter_addr+1),readb(adapter_addr+2),
+			readb(adapter_addr+3),readb(adapter_addr+4),readb(adapter_addr+5));
+#endif
+
+	memcpy_fromio(&dev->dev_addr[0], adapter_addr,6);
+
+	olympic_priv->olympic_addr_table_addr = swab16(readw(init_srb + 12)); 
+	olympic_priv->olympic_parms_addr = swab16(readw(init_srb + 14)); 
+
+	return 0;
+
+}
+
+static int olympic_open(struct net_device *dev) 
+{
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*init_srb;
+	unsigned long flags, t;
+	int i, open_finished = 1 ;
+	u8 resp, err;
+
+	DECLARE_WAITQUEUE(wait,current) ; 
+
+	olympic_init(dev);
+
+	if(request_irq(dev->irq, &olympic_interrupt, SA_SHIRQ , "olympic", dev)) {
+		return -EAGAIN;
+	}
+
+#if OLYMPIC_DEBUG
+	printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM));
+	printk("pending ints: %x\n",readl(olympic_mmio+SISR_RR));
+#endif
+
+	writel(SISR_MI,olympic_mmio+SISR_MASK_SUM);
+
+	writel(SISR_MI | SISR_SRB_REPLY, olympic_mmio+SISR_MASK); /* more ints later, doesn't stop arb cmd interrupt */
+
+	writel(LISR_LIE,olympic_mmio+LISR); /* more ints later */
+
+	/* adapter is closed, so SRB is pointed to by LAPWWO */
+
+	writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA);
+	init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800));
+	
+#if OLYMPIC_DEBUG
+	printk("LAPWWO: %x, LAPA: %x\n",readw(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA));
+	printk("SISR Mask = %04x\n", readl(olympic_mmio+SISR_MASK));
+	printk("Before the open command \n");
+#endif	
+	do {
+		memset_io(init_srb,0,SRB_COMMAND_SIZE);
+
+		writeb(SRB_OPEN_ADAPTER,init_srb) ; 	/* open */
+		writeb(OLYMPIC_CLEAR_RET_CODE,init_srb+2);
+
+		/* If Network Monitor, instruct card to copy MAC frames through the ARB */
+		if (olympic_priv->olympic_network_monitor) 
+			writew(swab16(OPEN_ADAPTER_ENABLE_FDX | OPEN_ADAPTER_PASS_ADC_MAC | OPEN_ADAPTER_PASS_ATT_MAC | OPEN_ADAPTER_PASS_BEACON), init_srb+8);
+		else
+			writew(swab16(OPEN_ADAPTER_ENABLE_FDX), init_srb+8);
+	
+		/* Test OR of first 3 bytes as its totally possible for 
+		 * someone to set the first 2 bytes to be zero, although this 
+		 * is an error, the first byte must have bit 6 set to 1  */
+
+		if (olympic_priv->olympic_laa[0] | olympic_priv->olympic_laa[1] | olympic_priv->olympic_laa[2]) {
+			writeb(olympic_priv->olympic_laa[0],init_srb+12);
+			writeb(olympic_priv->olympic_laa[1],init_srb+13);
+			writeb(olympic_priv->olympic_laa[2],init_srb+14);
+			writeb(olympic_priv->olympic_laa[3],init_srb+15);
+			writeb(olympic_priv->olympic_laa[4],init_srb+16);
+			writeb(olympic_priv->olympic_laa[5],init_srb+17);
+			memcpy(dev->dev_addr,olympic_priv->olympic_laa,dev->addr_len) ;  
+		} 	
+		writeb(1,init_srb+30);
+
+		spin_lock_irqsave(&olympic_priv->olympic_lock,flags);	
+		olympic_priv->srb_queued=1;
+
+		writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+		spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
+
+		t = jiffies ; 
+	
+		add_wait_queue(&olympic_priv->srb_wait,&wait) ;
+		set_current_state(TASK_INTERRUPTIBLE) ; 
+ 
+ 		while(olympic_priv->srb_queued) {        
+			schedule() ; 
+        		if(signal_pending(current))	{            
+				printk(KERN_WARNING "%s: Signal received in open.\n",
+                			dev->name);
+            			printk(KERN_WARNING "SISR=%x LISR=%x\n",
+                			readl(olympic_mmio+SISR),
+                			readl(olympic_mmio+LISR));
+            			olympic_priv->srb_queued=0;
+            			break;
+        		}
+			if ((jiffies-t) > 10*HZ) { 
+				printk(KERN_WARNING "%s: SRB timed out. \n",dev->name) ; 
+				olympic_priv->srb_queued=0;
+				break ; 
+			} 
+			set_current_state(TASK_INTERRUPTIBLE) ; 
+    		}
+		remove_wait_queue(&olympic_priv->srb_wait,&wait) ; 
+		set_current_state(TASK_RUNNING) ; 
+		olympic_priv->srb_queued = 0 ; 
+#if OLYMPIC_DEBUG
+		printk("init_srb(%p): ",init_srb);
+		for(i=0;i<20;i++)
+			printk("%02x ",readb(init_srb+i));
+		printk("\n");
+#endif
+		
+		/* If we get the same return response as we set, the interrupt wasn't raised and the open
+                 * timed out.
+		 */
+
+		switch (resp = readb(init_srb+2)) {
+		case OLYMPIC_CLEAR_RET_CODE:
+			printk(KERN_WARNING "%s: Adapter Open time out or error.\n", dev->name) ; 
+			goto out;
+		case 0:
+			open_finished = 1;
+			break;
+		case 0x07:
+			if (!olympic_priv->olympic_ring_speed && open_finished) { /* Autosense , first time around */
+				printk(KERN_WARNING "%s: Retrying at different ring speed \n", dev->name); 
+				open_finished = 0 ;  
+				continue;
+			}
+
+			err = readb(init_srb+7);
+
+			if (!olympic_priv->olympic_ring_speed && ((err & 0x0f) == 0x0d)) { 
+				printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n",dev->name);
+				printk(KERN_WARNING "%s: Please try again with a specified ring speed \n",dev->name);
+			} else {
+				printk(KERN_WARNING "%s: %s - %s\n", dev->name,
+					open_maj_error[(err & 0xf0) >> 4],
+					open_min_error[(err & 0x0f)]);
+			}
+			goto out;
+
+		case 0x32:
+			printk(KERN_WARNING "%s: Invalid LAA: %02x:%02x:%02x:%02x:%02x:%02x\n",
+				dev->name, 
+				olympic_priv->olympic_laa[0],
+				olympic_priv->olympic_laa[1],
+				olympic_priv->olympic_laa[2],
+				olympic_priv->olympic_laa[3],
+				olympic_priv->olympic_laa[4],
+				olympic_priv->olympic_laa[5]) ; 
+			goto out;
+
+		default:
+			printk(KERN_WARNING "%s: Bad OPEN response: %x\n", dev->name, resp);
+			goto out;
+
+		}
+	} while (!(open_finished)) ; /* Will only loop if ring speed mismatch re-open attempted && autosense is on */	
+
+	if (readb(init_srb+18) & (1<<3)) 
+		if (olympic_priv->olympic_message_level) 
+			printk(KERN_INFO "%s: Opened in FDX Mode\n",dev->name);
+
+	if (readb(init_srb+18) & (1<<1))
+		olympic_priv->olympic_ring_speed = 100 ; 
+	else if (readb(init_srb+18) & 1)
+		olympic_priv->olympic_ring_speed = 16 ; 
+	else
+		olympic_priv->olympic_ring_speed = 4 ; 
+
+	if (olympic_priv->olympic_message_level) 
+		printk(KERN_INFO "%s: Opened in %d Mbps mode\n",dev->name, olympic_priv->olympic_ring_speed);
+
+	olympic_priv->asb = swab16(readw(init_srb+8));
+	olympic_priv->srb = swab16(readw(init_srb+10));
+	olympic_priv->arb = swab16(readw(init_srb+12));
+	olympic_priv->trb = swab16(readw(init_srb+16));
+
+	olympic_priv->olympic_receive_options = 0x01 ; 
+	olympic_priv->olympic_copy_all_options = 0 ; 
+	
+	/* setup rx ring */
+	
+	writel((3<<16),olympic_mmio+BMCTL_RWM); /* Ensure end of frame generated interrupts */ 
+
+	writel(BMCTL_RX_DIS|3,olympic_mmio+BMCTL_RWM); /* Yes, this the enables RX channel */
+
+	for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) {
+
+		struct sk_buff *skb;
+		
+		skb=dev_alloc_skb(olympic_priv->pkt_buf_sz);
+		if(skb == NULL)
+			break;
+
+		skb->dev = dev;
+
+		olympic_priv->olympic_rx_ring[i].buffer = cpu_to_le32(pci_map_single(olympic_priv->pdev, 
+							  skb->data,olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)) ; 
+		olympic_priv->olympic_rx_ring[i].res_length = cpu_to_le32(olympic_priv->pkt_buf_sz); 
+		olympic_priv->rx_ring_skb[i]=skb;
+	}
+
+	if (i==0) {
+		printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name);
+		goto out;
+	}
+
+	olympic_priv->rx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_rx_ring, 
+					 sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE);
+	writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXDESCQ);
+	writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXCDA);
+	writew(i, olympic_mmio+RXDESCQCNT);
+		
+	olympic_priv->rx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_rx_status_ring, 
+						sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE);
+	writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXSTATQ);
+	writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXCSA);
+	
+ 	olympic_priv->rx_ring_last_received = OLYMPIC_RX_RING_SIZE - 1;	/* last processed rx status */
+	olympic_priv->rx_status_last_received = OLYMPIC_RX_RING_SIZE - 1;  
+
+	writew(i, olympic_mmio+RXSTATQCNT);
+
+#if OLYMPIC_DEBUG 
+	printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ));
+	printk("RXCSA: %x, rx_status_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]);
+	printk(" stat_ring[1]: %p, stat_ring[2]: %p, stat_ring[3]: %p\n", &(olympic_priv->olympic_rx_status_ring[1]), &(olympic_priv->olympic_rx_status_ring[2]), &(olympic_priv->olympic_rx_status_ring[3]) );
+	printk(" stat_ring[4]: %p, stat_ring[5]: %p, stat_ring[6]: %p\n", &(olympic_priv->olympic_rx_status_ring[4]), &(olympic_priv->olympic_rx_status_ring[5]), &(olympic_priv->olympic_rx_status_ring[6]) );
+	printk(" stat_ring[7]: %p\n", &(olympic_priv->olympic_rx_status_ring[7])  );
+
+	printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]);
+	printk("Rx_ring_dma_addr = %08x, rx_status_dma_addr = %08x\n",
+		olympic_priv->rx_ring_dma_addr,olympic_priv->rx_status_ring_dma_addr) ; 
+#endif
+
+	writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | i,olympic_mmio+RXENQ);
+
+#if OLYMPIC_DEBUG 
+	printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ));
+	printk("RXCSA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]);
+	printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]);
+#endif 
+
+	writel(SISR_RX_STATUS | SISR_RX_NOBUF,olympic_mmio+SISR_MASK_SUM);
+
+	/* setup tx ring */
+
+	writel(BMCTL_TX1_DIS,olympic_mmio+BMCTL_RWM); /* Yes, this enables TX channel 1 */
+	for(i=0;i<OLYMPIC_TX_RING_SIZE;i++) 
+		olympic_priv->olympic_tx_ring[i].buffer=0xdeadbeef;
+
+	olympic_priv->free_tx_ring_entries=OLYMPIC_TX_RING_SIZE;
+	olympic_priv->tx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_tx_ring,
+					 sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE,PCI_DMA_TODEVICE) ; 
+	writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXDESCQ_1);
+	writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXCDA_1);
+	writew(OLYMPIC_TX_RING_SIZE, olympic_mmio+TXDESCQCNT_1);
+	
+	olympic_priv->tx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_tx_status_ring,
+						sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE);
+	writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXSTATQ_1);
+	writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXCSA_1);
+	writew(OLYMPIC_TX_RING_SIZE,olympic_mmio+TXSTATQCNT_1);
+		
+	olympic_priv->tx_ring_free=0; /* next entry in tx ring to use */
+	olympic_priv->tx_ring_last_status=OLYMPIC_TX_RING_SIZE-1; /* last processed tx status */
+
+	writel(0xffffffff, olympic_mmio+EISR_RWM) ; /* clean the eisr */
+	writel(0,olympic_mmio+EISR) ; 
+	writel(EISR_MASK_OPTIONS,olympic_mmio+EISR_MASK) ; /* enables most of the TX error interrupts */
+	writel(SISR_TX1_EOF | SISR_ADAPTER_CHECK | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_ASB_FREE | SISR_ERR,olympic_mmio+SISR_MASK_SUM);
+
+#if OLYMPIC_DEBUG 
+	printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM));
+	printk("SISR MASK: %x\n",readl(olympic_mmio+SISR_MASK));
+#endif
+
+	if (olympic_priv->olympic_network_monitor) { 
+		u8 __iomem *oat ; 
+		u8 __iomem *opt ; 
+		oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ; 
+		opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ; 
+
+		printk("%s: Node Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, 
+			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)), 
+			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1),
+			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2),
+			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3),
+			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4),
+			readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5));
+		printk("%s: Functional Address: %02x:%02x:%02x:%02x\n",dev->name, 
+			readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), 
+			readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1),
+			readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2),
+			readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3));
+		printk("%s: NAUN Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, 
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)),
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1),
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2),
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3),
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4),
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5));
+	}
+	
+	netif_start_queue(dev);
+	return 0;
+
+out:
+	free_irq(dev->irq, dev);
+	return -EIO;
+}	
+
+/*
+ *	When we enter the rx routine we do not know how many frames have been 
+ *	queued on the rx channel.  Therefore we start at the next rx status
+ *	position and travel around the receive ring until we have completed
+ *	all the frames.
+ *
+ *	This means that we may process the frame before we receive the end
+ *	of frame interrupt. This is why we always test the status instead
+ *	of blindly processing the next frame.
+ *
+ *	We also remove the last 4 bytes from the packet as well, these are
+ *	just token ring trailer info and upset protocols that don't check 
+ *	their own length, i.e. SNA. 
+ *	
+ */
+static void olympic_rx(struct net_device *dev)
+{
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio;
+	struct olympic_rx_status *rx_status;
+	struct olympic_rx_desc *rx_desc ; 
+	int rx_ring_last_received,length, buffer_cnt, cpy_length, frag_len;
+	struct sk_buff *skb, *skb2;
+	int i;
+
+	rx_status=&(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received + 1) & (OLYMPIC_RX_RING_SIZE - 1)]) ; 
+ 
+	while (rx_status->status_buffercnt) { 
+                u32 l_status_buffercnt;
+
+		olympic_priv->rx_status_last_received++ ;
+		olympic_priv->rx_status_last_received &= (OLYMPIC_RX_RING_SIZE -1);
+#if OLYMPIC_DEBUG
+		printk("rx status: %x rx len: %x \n", le32_to_cpu(rx_status->status_buffercnt), le32_to_cpu(rx_status->fragmentcnt_framelen));
+#endif
+		length = le32_to_cpu(rx_status->fragmentcnt_framelen) & 0xffff;
+		buffer_cnt = le32_to_cpu(rx_status->status_buffercnt) & 0xffff; 
+		i = buffer_cnt ; /* Need buffer_cnt later for rxenq update */ 
+		frag_len = le32_to_cpu(rx_status->fragmentcnt_framelen) >> 16; 
+
+#if OLYMPIC_DEBUG 
+		printk("length: %x, frag_len: %x, buffer_cnt: %x\n", length, frag_len, buffer_cnt);
+#endif
+                l_status_buffercnt = le32_to_cpu(rx_status->status_buffercnt);
+		if(l_status_buffercnt & 0xC0000000) {
+			if (l_status_buffercnt & 0x3B000000) {
+				if (olympic_priv->olympic_message_level) {
+					if (l_status_buffercnt & (1<<29))  /* Rx Frame Truncated */
+						printk(KERN_WARNING "%s: Rx Frame Truncated \n",dev->name);
+					if (l_status_buffercnt & (1<<28)) /*Rx receive overrun */
+						printk(KERN_WARNING "%s: Rx Frame Receive overrun \n",dev->name);
+					if (l_status_buffercnt & (1<<27)) /* No receive buffers */
+						printk(KERN_WARNING "%s: No receive buffers \n",dev->name);
+					if (l_status_buffercnt & (1<<25)) /* Receive frame error detect */
+						printk(KERN_WARNING "%s: Receive frame error detect \n",dev->name);
+					if (l_status_buffercnt & (1<<24)) /* Received Error Detect */
+						printk(KERN_WARNING "%s: Received Error Detect \n",dev->name);
+				} 
+				olympic_priv->rx_ring_last_received += i ; 
+				olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ; 
+				olympic_priv->olympic_stats.rx_errors++;	 
+			} else {	
+			
+				if (buffer_cnt == 1) {
+					skb = dev_alloc_skb(max_t(int, olympic_priv->pkt_buf_sz,length)) ; 
+				} else {
+					skb = dev_alloc_skb(length) ; 
+				}
+
+				if (skb == NULL) {
+					printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers. \n",dev->name) ;
+					olympic_priv->olympic_stats.rx_dropped++ ; 
+					/* Update counters even though we don't transfer the frame */
+					olympic_priv->rx_ring_last_received += i ; 
+					olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ;  
+				} else  {
+					skb->dev = dev ; 
+
+					/* Optimise based upon number of buffers used. 
+			   	   	   If only one buffer is used we can simply swap the buffers around.
+			   	   	   If more than one then we must use the new buffer and copy the information
+			   	   	   first. Ideally all frames would be in a single buffer, this can be tuned by
+                               	   	   altering the buffer size. If the length of the packet is less than
+					   1500 bytes we're going to copy it over anyway to stop packets getting
+					   dropped from sockets with buffers smaller than our pkt_buf_sz. */
+				
+ 					if (buffer_cnt==1) {
+						olympic_priv->rx_ring_last_received++ ; 
+						olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1);
+						rx_ring_last_received = olympic_priv->rx_ring_last_received ;
+						if (length > 1500) { 
+							skb2=olympic_priv->rx_ring_skb[rx_ring_last_received] ; 
+							/* unmap buffer */
+							pci_unmap_single(olympic_priv->pdev,
+								le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), 
+								olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; 
+							skb_put(skb2,length-4);
+							skb2->protocol = tr_type_trans(skb2,dev);
+							olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer = 
+								cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, 
+								olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE));
+							olympic_priv->olympic_rx_ring[rx_ring_last_received].res_length = 
+								cpu_to_le32(olympic_priv->pkt_buf_sz); 
+							olympic_priv->rx_ring_skb[rx_ring_last_received] = skb ; 
+							netif_rx(skb2) ; 
+						} else { 
+							pci_dma_sync_single_for_cpu(olympic_priv->pdev,
+								le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer),
+								olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; 
+							memcpy(skb_put(skb,length-4),olympic_priv->rx_ring_skb[rx_ring_last_received]->data,length-4) ; 
+							pci_dma_sync_single_for_device(olympic_priv->pdev,
+								le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer),
+								olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+							skb->protocol = tr_type_trans(skb,dev) ; 
+							netif_rx(skb) ; 
+						} 
+					} else {
+						do { /* Walk the buffers */ 
+							olympic_priv->rx_ring_last_received++ ; 
+							olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1);
+							rx_ring_last_received = olympic_priv->rx_ring_last_received ; 
+							pci_dma_sync_single_for_cpu(olympic_priv->pdev,
+								le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer),
+								olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; 
+							rx_desc = &(olympic_priv->olympic_rx_ring[rx_ring_last_received]);
+							cpy_length = (i == 1 ? frag_len : le32_to_cpu(rx_desc->res_length)); 
+							memcpy(skb_put(skb, cpy_length), olympic_priv->rx_ring_skb[rx_ring_last_received]->data, cpy_length) ;
+							pci_dma_sync_single_for_device(olympic_priv->pdev,
+								le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer),
+								olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ;
+						} while (--i) ; 
+						skb_trim(skb,skb->len-4) ; 
+						skb->protocol = tr_type_trans(skb,dev);
+						netif_rx(skb) ; 
+					} 
+					dev->last_rx = jiffies ; 
+					olympic_priv->olympic_stats.rx_packets++ ; 
+					olympic_priv->olympic_stats.rx_bytes += length ; 
+				} /* if skb == null */
+			} /* If status & 0x3b */
+
+		} else { /*if buffercnt & 0xC */
+			olympic_priv->rx_ring_last_received += i ; 
+			olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE - 1) ; 
+		} 
+
+		rx_status->fragmentcnt_framelen = 0 ; 
+		rx_status->status_buffercnt = 0 ; 
+		rx_status = &(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received+1) & (OLYMPIC_RX_RING_SIZE -1) ]);
+
+		writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) |  buffer_cnt , olympic_mmio+RXENQ); 
+	} /* while */
+
+}
+
+static void olympic_freemem(struct net_device *dev) 
+{ 
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+	int i;
+			
+	for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) {
+		if (olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] != NULL) {
+			dev_kfree_skb_irq(olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received]);
+			olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] = NULL;
+		}
+		if (olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer != 0xdeadbeef) {
+			pci_unmap_single(olympic_priv->pdev, 
+			le32_to_cpu(olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer),
+			olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE);
+		}
+		olympic_priv->rx_status_last_received++;
+		olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1;
+	}
+	/* unmap rings */
+	pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_status_ring_dma_addr, 
+		sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE);
+	pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_ring_dma_addr,
+		sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE);
+
+	pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_status_ring_dma_addr, 
+		sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE);
+	pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_ring_dma_addr, 
+		sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE, PCI_DMA_TODEVICE);
+
+	return ; 
+}
+ 
+static irqreturn_t olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs) 
+{
+	struct net_device *dev= (struct net_device *)dev_id;
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio;
+	u32 sisr;
+	u8 __iomem *adapter_check_area ; 
+	
+	/* 
+	 *  Read sisr but don't reset it yet. 
+	 *  The indication bit may have been set but the interrupt latch
+	 *  bit may not be set, so we'd lose the interrupt later. 
+	 */ 
+	sisr=readl(olympic_mmio+SISR) ; 
+	if (!(sisr & SISR_MI)) /* Interrupt isn't for us */ 
+		return IRQ_NONE;
+	sisr=readl(olympic_mmio+SISR_RR) ;  /* Read & Reset sisr */ 
+
+	spin_lock(&olympic_priv->olympic_lock);
+
+	/* Hotswap gives us this on removal */
+	if (sisr == 0xffffffff) { 
+		printk(KERN_WARNING "%s: Hotswap adapter removal.\n",dev->name) ; 
+		spin_unlock(&olympic_priv->olympic_lock) ; 
+		return IRQ_NONE;
+	} 
+		
+	if (sisr & (SISR_SRB_REPLY | SISR_TX1_EOF | SISR_RX_STATUS | SISR_ADAPTER_CHECK |  
+			SISR_ASB_FREE | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_RX_NOBUF | SISR_ERR)) {  
+	
+		/* If we ever get this the adapter is seriously dead. Only a reset is going to 
+		 * bring it back to life. We're talking pci bus errors and such like :( */ 
+		if((sisr & SISR_ERR) && (readl(olympic_mmio+EISR) & EISR_MASK_OPTIONS)) {
+			printk(KERN_ERR "Olympic: EISR Error, EISR=%08x\n",readl(olympic_mmio+EISR)) ; 
+			printk(KERN_ERR "The adapter must be reset to clear this condition.\n") ; 
+			printk(KERN_ERR "Please report this error to the driver maintainer and/\n") ; 
+			printk(KERN_ERR "or the linux-tr mailing list.\n") ; 
+			wake_up_interruptible(&olympic_priv->srb_wait);
+			spin_unlock(&olympic_priv->olympic_lock) ; 
+			return IRQ_HANDLED;
+		} /* SISR_ERR */
+
+		if(sisr & SISR_SRB_REPLY) {
+			if(olympic_priv->srb_queued==1) {
+				wake_up_interruptible(&olympic_priv->srb_wait);
+			} else if (olympic_priv->srb_queued==2) { 
+				olympic_srb_bh(dev) ; 
+			}
+			olympic_priv->srb_queued=0;
+		} /* SISR_SRB_REPLY */
+
+		/* We shouldn't ever miss the Tx interrupt, but the you never know, hence the loop to ensure
+		   we get all tx completions. */
+		if (sisr & SISR_TX1_EOF) {
+			while(olympic_priv->olympic_tx_status_ring[(olympic_priv->tx_ring_last_status + 1) & (OLYMPIC_TX_RING_SIZE-1)].status) { 
+				olympic_priv->tx_ring_last_status++;
+				olympic_priv->tx_ring_last_status &= (OLYMPIC_TX_RING_SIZE-1);
+				olympic_priv->free_tx_ring_entries++;
+				olympic_priv->olympic_stats.tx_bytes += olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len;
+				olympic_priv->olympic_stats.tx_packets++ ; 
+				pci_unmap_single(olympic_priv->pdev, 
+					le32_to_cpu(olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer), 
+					olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len,PCI_DMA_TODEVICE);
+				dev_kfree_skb_irq(olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]);
+				olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer=0xdeadbeef;
+				olympic_priv->olympic_tx_status_ring[olympic_priv->tx_ring_last_status].status=0;
+			}
+			netif_wake_queue(dev);
+		} /* SISR_TX1_EOF */
+	
+		if (sisr & SISR_RX_STATUS) {
+			olympic_rx(dev);
+		} /* SISR_RX_STATUS */
+	
+		if (sisr & SISR_ADAPTER_CHECK) {
+			netif_stop_queue(dev);
+			printk(KERN_WARNING "%s: Adapter Check Interrupt Raised, 8 bytes of information follow:\n", dev->name);
+			writel(readl(olympic_mmio+LAPWWC),olympic_mmio+LAPA);
+			adapter_check_area = olympic_priv->olympic_lap + ((readl(olympic_mmio+LAPWWC)) & (~0xf800)) ;
+			printk(KERN_WARNING "%s: Bytes %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, readb(adapter_check_area+0), readb(adapter_check_area+1), readb(adapter_check_area+2), readb(adapter_check_area+3), readb(adapter_check_area+4), readb(adapter_check_area+5), readb(adapter_check_area+6), readb(adapter_check_area+7)) ; 
+			spin_unlock(&olympic_priv->olympic_lock) ; 
+			return IRQ_HANDLED; 
+		} /* SISR_ADAPTER_CHECK */
+	
+		if (sisr & SISR_ASB_FREE) {
+			/* Wake up anything that is waiting for the asb response */  
+			if (olympic_priv->asb_queued) {
+				olympic_asb_bh(dev) ; 
+			}
+		} /* SISR_ASB_FREE */
+	
+		if (sisr & SISR_ARB_CMD) {
+			olympic_arb_cmd(dev) ; 
+		} /* SISR_ARB_CMD */
+	
+		if (sisr & SISR_TRB_REPLY) {
+			/* Wake up anything that is waiting for the trb response */
+			if (olympic_priv->trb_queued) {
+				wake_up_interruptible(&olympic_priv->trb_wait);
+			}
+			olympic_priv->trb_queued = 0 ; 
+		} /* SISR_TRB_REPLY */	
+	
+		if (sisr & SISR_RX_NOBUF) {
+			/* According to the documentation, we don't have to do anything, but trapping it keeps it out of
+                  	   	   /var/log/messages.  */
+		} /* SISR_RX_NOBUF */
+	} else { 
+		printk(KERN_WARNING "%s: Unexpected interrupt: %x\n",dev->name, sisr);
+		printk(KERN_WARNING "%s: SISR_MASK: %x\n",dev->name, readl(olympic_mmio+SISR_MASK)) ;
+	} /* One if the interrupts we want */
+	writel(SISR_MI,olympic_mmio+SISR_MASK_SUM);
+	
+	spin_unlock(&olympic_priv->olympic_lock) ; 
+	return IRQ_HANDLED;
+}	
+
+static int olympic_xmit(struct sk_buff *skb, struct net_device *dev) 
+{
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio;
+	unsigned long flags ; 
+
+	spin_lock_irqsave(&olympic_priv->olympic_lock, flags);
+
+	netif_stop_queue(dev);
+	
+	if(olympic_priv->free_tx_ring_entries) {
+		olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].buffer = 
+			cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, skb->len,PCI_DMA_TODEVICE));
+		olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].status_length = cpu_to_le32(skb->len | (0x80000000));
+		olympic_priv->tx_ring_skb[olympic_priv->tx_ring_free]=skb;
+		olympic_priv->free_tx_ring_entries--;
+
+        	olympic_priv->tx_ring_free++;
+        	olympic_priv->tx_ring_free &= (OLYMPIC_TX_RING_SIZE-1);
+		writew((((readw(olympic_mmio+TXENQ_1)) & 0x8000) ^ 0x8000) | 1,olympic_mmio+TXENQ_1);
+		netif_wake_queue(dev);
+		spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
+		return 0;
+	} else {
+		spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
+		return 1;
+	} 
+
+}
+	
+
+static int olympic_close(struct net_device *dev) 
+{
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*srb;
+	unsigned long t,flags;
+
+	DECLARE_WAITQUEUE(wait,current) ; 
+
+	netif_stop_queue(dev);
+	
+	writel(olympic_priv->srb,olympic_mmio+LAPA);
+	srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
+	
+    	writeb(SRB_CLOSE_ADAPTER,srb+0);
+	writeb(0,srb+1);
+	writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+
+	add_wait_queue(&olympic_priv->srb_wait,&wait) ;
+	set_current_state(TASK_INTERRUPTIBLE) ; 
+
+	spin_lock_irqsave(&olympic_priv->olympic_lock,flags);
+	olympic_priv->srb_queued=1;
+
+	writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+	spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags);
+
+	while(olympic_priv->srb_queued) {
+
+		t = schedule_timeout(60*HZ); 
+
+        	if(signal_pending(current))	{            
+			printk(KERN_WARNING "%s: SRB timed out.\n",dev->name);
+            		printk(KERN_WARNING "SISR=%x MISR=%x\n",readl(olympic_mmio+SISR),readl(olympic_mmio+LISR));
+            		olympic_priv->srb_queued=0;
+            		break;
+        	}
+
+		if (t == 0) { 
+			printk(KERN_WARNING "%s: SRB timed out. May not be fatal. \n",dev->name) ; 
+		} 
+		olympic_priv->srb_queued=0;
+    	}
+	remove_wait_queue(&olympic_priv->srb_wait,&wait) ; 
+
+	olympic_priv->rx_status_last_received++;
+	olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1;
+
+	olympic_freemem(dev) ; 	
+
+	/* reset tx/rx fifo's and busmaster logic */
+
+	writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL);
+	udelay(1);
+	writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL);
+
+#if OLYMPIC_DEBUG
+	{
+	int i ; 
+	printk("srb(%p): ",srb);
+	for(i=0;i<4;i++)
+		printk("%x ",readb(srb+i));
+	printk("\n");
+	}
+#endif
+	free_irq(dev->irq,dev);
+
+	return 0;
+	
+}
+
+static void olympic_set_rx_mode(struct net_device *dev) 
+{
+	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; 
+   	u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ; 
+	u8 options = 0; 
+	u8 __iomem *srb;
+	struct dev_mc_list *dmi ; 
+	unsigned char dev_mc_address[4] ; 
+	int i ; 
+
+	writel(olympic_priv->srb,olympic_mmio+LAPA);
+	srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
+	options = olympic_priv->olympic_copy_all_options; 
+
+	if (dev->flags&IFF_PROMISC)  
+		options |= 0x61 ;
+	else
+		options &= ~0x61 ; 
+
+	/* Only issue the srb if there is a change in options */
+
+	if ((options ^ olympic_priv->olympic_copy_all_options)) { 
+	
+		/* Now to issue the srb command to alter the copy.all.options */
+	
+		writeb(SRB_MODIFY_RECEIVE_OPTIONS,srb);
+		writeb(0,srb+1);
+		writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+		writeb(0,srb+3);
+		writeb(olympic_priv->olympic_receive_options,srb+4);
+		writeb(options,srb+5);
+
+		olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
+
+		writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+		olympic_priv->olympic_copy_all_options = options ;
+		
+		return ;  
+	} 
+
+	/* Set the functional addresses we need for multicast */
+
+	dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; 
+
+	for (i=0,dmi=dev->mc_list;i < dev->mc_count; i++,dmi = dmi->next) { 
+		dev_mc_address[0] |= dmi->dmi_addr[2] ; 
+		dev_mc_address[1] |= dmi->dmi_addr[3] ; 
+		dev_mc_address[2] |= dmi->dmi_addr[4] ; 
+		dev_mc_address[3] |= dmi->dmi_addr[5] ; 
+	}
+
+	writeb(SRB_SET_FUNC_ADDRESS,srb+0);
+	writeb(0,srb+1);
+	writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+	writeb(0,srb+3);
+	writeb(0,srb+4);
+	writeb(0,srb+5);
+	writeb(dev_mc_address[0],srb+6);
+	writeb(dev_mc_address[1],srb+7);
+	writeb(dev_mc_address[2],srb+8);
+	writeb(dev_mc_address[3],srb+9);
+
+	olympic_priv->srb_queued = 2 ;
+	writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+}
+
+static void olympic_srb_bh(struct net_device *dev) 
+{ 
+	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; 
+   	u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ; 
+	u8 __iomem *srb;
+
+	writel(olympic_priv->srb,olympic_mmio+LAPA);
+	srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
+
+	switch (readb(srb)) { 
+
+		/* SRB_MODIFY_RECEIVE_OPTIONS i.e. set_multicast_list options (promiscuous) 
+                 * At some point we should do something if we get an error, such as
+                 * resetting the IFF_PROMISC flag in dev
+		 */
+
+		case SRB_MODIFY_RECEIVE_OPTIONS:
+			switch (readb(srb+2)) { 
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name) ; 
+					break ; 
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name);
+					break ; 
+				default:
+					if (olympic_priv->olympic_message_level) 
+						printk(KERN_WARNING "%s: Receive Options Modified to %x,%x\n",dev->name,olympic_priv->olympic_copy_all_options, olympic_priv->olympic_receive_options) ; 
+					break ; 	
+			} /* switch srb[2] */ 
+			break ;
+		
+		/* SRB_SET_GROUP_ADDRESS - Multicast group setting 
+                 */
+
+		case SRB_SET_GROUP_ADDRESS:
+			switch (readb(srb+2)) { 
+				case 0x00:
+					break ; 
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; 
+					break ;
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name); 
+					break ;
+				case 0x3c:
+					printk(KERN_WARNING "%s: Group/Functional address indicator bits not set correctly\n",dev->name) ; 
+					break ;
+				case 0x3e: /* If we ever implement individual multicast addresses, will need to deal with this */
+					printk(KERN_WARNING "%s: Group address registers full\n",dev->name) ; 
+					break ;  
+				case 0x55:
+					printk(KERN_INFO "%s: Group Address already set.\n",dev->name) ; 
+					break ;
+				default:
+					break ; 
+			} /* switch srb[2] */ 
+			break ; 
+
+		/* SRB_RESET_GROUP_ADDRESS - Remove a multicast address from group list
+ 		 */
+
+		case SRB_RESET_GROUP_ADDRESS:
+			switch (readb(srb+2)) { 
+				case 0x00:
+					break ; 
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; 
+					break ; 
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; 
+					break ; 
+				case 0x39: /* Must deal with this if individual multicast addresses used */
+					printk(KERN_INFO "%s: Group address not found \n",dev->name); 
+					break ;
+				default:
+					break ; 
+			} /* switch srb[2] */
+			break ; 
+
+		
+		/* SRB_SET_FUNC_ADDRESS - Called by the set_rx_mode 
+		 */
+
+		case SRB_SET_FUNC_ADDRESS:
+			switch (readb(srb+2)) { 
+				case 0x00:
+					if (olympic_priv->olympic_message_level)
+						printk(KERN_INFO "%s: Functional Address Mask Set \n",dev->name) ; 
+					break ;
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; 
+					break ; 
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; 
+					break ; 
+				default:
+					break ; 
+			} /* switch srb[2] */
+			break ; 
+	
+		/* SRB_READ_LOG - Read and reset the adapter error counters
+ 		 */
+
+		case SRB_READ_LOG:
+			switch (readb(srb+2)) { 
+				case 0x00: 
+					if (olympic_priv->olympic_message_level) 
+						printk(KERN_INFO "%s: Read Log issued\n",dev->name) ; 
+					break ; 
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; 
+					break ; 
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; 
+					break ; 
+			
+			} /* switch srb[2] */
+			break ; 
+		
+		/* SRB_READ_SR_COUNTERS - Read and reset the source routing bridge related counters */
+
+		case SRB_READ_SR_COUNTERS:
+			switch (readb(srb+2)) { 
+				case 0x00: 
+					if (olympic_priv->olympic_message_level) 
+						printk(KERN_INFO "%s: Read Source Routing Counters issued\n",dev->name) ; 
+					break ; 
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; 
+					break ; 
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; 
+					break ; 
+				default:
+					break ; 
+			} /* switch srb[2] */
+			break ;
+ 
+		default:
+			printk(KERN_WARNING "%s: Unrecognized srb bh return value.\n",dev->name);
+			break ; 
+	} /* switch srb[0] */
+
+} 
+
+static struct net_device_stats * olympic_get_stats(struct net_device *dev)
+{
+	struct olympic_private *olympic_priv ;
+	olympic_priv=(struct olympic_private *) dev->priv;
+	return (struct net_device_stats *) &olympic_priv->olympic_stats; 
+}
+
+static int olympic_set_mac_address (struct net_device *dev, void *addr) 
+{
+	struct sockaddr *saddr = addr ; 
+	struct olympic_private *olympic_priv = (struct olympic_private *)dev->priv ; 
+
+	if (netif_running(dev)) { 
+		printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ; 
+		return -EIO ; 
+	}
+
+	memcpy(olympic_priv->olympic_laa, saddr->sa_data,dev->addr_len) ; 
+	
+	if (olympic_priv->olympic_message_level) { 
+ 		printk(KERN_INFO "%s: MAC/LAA Set to  = %x.%x.%x.%x.%x.%x\n",dev->name, olympic_priv->olympic_laa[0],
+		olympic_priv->olympic_laa[1], olympic_priv->olympic_laa[2],
+		olympic_priv->olympic_laa[3], olympic_priv->olympic_laa[4],
+		olympic_priv->olympic_laa[5]);
+	} 
+
+	return 0 ; 
+}
+
+static void olympic_arb_cmd(struct net_device *dev)
+{
+	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv;
+	u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio;
+	u8 __iomem *arb_block, *asb_block, *srb  ; 
+	u8 header_len ; 
+	u16 frame_len, buffer_len ;
+	struct sk_buff *mac_frame ;  
+	u8 __iomem *buf_ptr ;
+	u8 __iomem *frame_data ;  
+	u16 buff_off ; 
+	u16 lan_status = 0, lan_status_diff  ; /* Initialize to stop compiler warning */
+	u8 fdx_prot_error ; 
+	u16 next_ptr;
+
+	arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ; 
+	asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ; 
+	srb = (olympic_priv->olympic_lap + olympic_priv->srb) ; 
+	
+	if (readb(arb_block+0) == ARB_RECEIVE_DATA) { /* Receive.data, MAC frames */
+
+		header_len = readb(arb_block+8) ; /* 802.5 Token-Ring Header Length */	
+		frame_len = swab16(readw(arb_block + 10)) ; 
+
+		buff_off = swab16(readw(arb_block + 6)) ;
+		
+		buf_ptr = olympic_priv->olympic_lap + buff_off ; 
+
+#if OLYMPIC_DEBUG
+{
+		int i;
+		frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; 
+
+		for (i=0 ;  i < 14 ; i++) { 
+			printk("Loc %d = %02x\n",i,readb(frame_data + i)); 
+		}
+
+		printk("next %04x, fs %02x, len %04x \n",readw(buf_ptr+offsetof(struct mac_receive_buffer,next)), readb(buf_ptr+offsetof(struct mac_receive_buffer,frame_status)), readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); 
+}
+#endif 
+		mac_frame = dev_alloc_skb(frame_len) ; 
+		if (!mac_frame) {
+			printk(KERN_WARNING "%s: Memory squeeze, dropping frame.\n", dev->name);
+			goto drop_frame;
+		}
+
+		/* Walk the buffer chain, creating the frame */
+
+		do {
+			frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; 
+			buffer_len = swab16(readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); 
+			memcpy_fromio(skb_put(mac_frame, buffer_len), frame_data , buffer_len ) ;
+			next_ptr=readw(buf_ptr+offsetof(struct mac_receive_buffer,next)); 
+		} while (next_ptr && (buf_ptr=olympic_priv->olympic_lap + ntohs(next_ptr)));
+
+		if (olympic_priv->olympic_network_monitor) { 
+			struct trh_hdr *mac_hdr ; 
+			printk(KERN_WARNING "%s: Received MAC Frame, details: \n",dev->name) ;
+			mac_hdr = (struct trh_hdr *)mac_frame->data ; 
+			printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->daddr[0], mac_hdr->daddr[1], mac_hdr->daddr[2], mac_hdr->daddr[3], mac_hdr->daddr[4], mac_hdr->daddr[5]) ; 
+			printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->saddr[0], mac_hdr->saddr[1], mac_hdr->saddr[2], mac_hdr->saddr[3], mac_hdr->saddr[4], mac_hdr->saddr[5]) ; 
+		}
+		mac_frame->dev = dev ; 
+		mac_frame->protocol = tr_type_trans(mac_frame,dev);
+		netif_rx(mac_frame) ; 	
+		dev->last_rx = jiffies;
+
+drop_frame:
+		/* Now tell the card we have dealt with the received frame */
+
+		/* Set LISR Bit 1 */
+		writel(LISR_ARB_FREE,olympic_priv->olympic_mmio + LISR_SUM);
+
+		/* Is the ASB free ? */ 	
+		
+		if (readb(asb_block + 2) != 0xff) { 
+			olympic_priv->asb_queued = 1 ; 
+			writel(LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); 
+			return ; 	
+			/* Drop out and wait for the bottom half to be run */
+		}
+		
+		writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */
+		writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */
+		writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */
+		writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */		
+
+		writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM);
+		
+		olympic_priv->asb_queued = 2 ; 
+	
+		return ; 	
+		
+	} else if (readb(arb_block) == ARB_LAN_CHANGE_STATUS) { /* Lan.change.status */
+		lan_status = swab16(readw(arb_block+6));
+		fdx_prot_error = readb(arb_block+8) ; 
+		
+		/* Issue ARB Free */
+		writel(LISR_ARB_FREE,olympic_priv->olympic_mmio+LISR_SUM);
+
+		lan_status_diff = olympic_priv->olympic_lan_status ^ lan_status ; 
+
+		if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) { 
+			if (lan_status_diff & LSC_LWF) 
+					printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name);
+			if (lan_status_diff & LSC_ARW) 
+					printk(KERN_WARNING "%s: Auto removal error\n",dev->name);
+			if (lan_status_diff & LSC_FPE)
+					printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name);
+			if (lan_status_diff & LSC_RR) 
+					printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name);
+		
+			/* Adapter has been closed by the hardware */
+		
+			/* reset tx/rx fifo's and busmaster logic */
+
+			writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL);
+			udelay(1);
+			writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL);
+			netif_stop_queue(dev);
+			olympic_priv->srb = readw(olympic_priv->olympic_lap + LAPWWO) ; 
+			printk(KERN_WARNING "%s: Adapter has been closed \n", dev->name) ; 
+		} /* If serious error */
+		
+		if (olympic_priv->olympic_message_level) { 
+			if (lan_status_diff & LSC_SIG_LOSS) 
+					printk(KERN_WARNING "%s: No receive signal detected \n", dev->name) ; 
+			if (lan_status_diff & LSC_HARD_ERR)
+					printk(KERN_INFO "%s: Beaconing \n",dev->name);
+			if (lan_status_diff & LSC_SOFT_ERR)
+					printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame \n",dev->name);
+			if (lan_status_diff & LSC_TRAN_BCN) 
+					printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name);
+			if (lan_status_diff & LSC_SS) 
+					printk(KERN_INFO "%s: Single Station on the ring \n", dev->name);
+			if (lan_status_diff & LSC_RING_REC)
+					printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name);
+			if (lan_status_diff & LSC_FDX_MODE)
+					printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name);
+		} 	
+		
+		if (lan_status_diff & LSC_CO) { 
+					
+				if (olympic_priv->olympic_message_level) 
+					printk(KERN_INFO "%s: Counter Overflow \n", dev->name);
+					
+				/* Issue READ.LOG command */
+
+				writeb(SRB_READ_LOG, srb);
+				writeb(0,srb+1);
+				writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+				writeb(0,srb+3);
+				writeb(0,srb+4);
+				writeb(0,srb+5);
+					
+				olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
+
+				writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+					
+		}
+
+		if (lan_status_diff & LSC_SR_CO) { 
+
+				if (olympic_priv->olympic_message_level)
+					printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name);
+
+				/* Issue a READ.SR.COUNTERS */
+				
+				writeb(SRB_READ_SR_COUNTERS,srb);
+				writeb(0,srb+1);
+				writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+				writeb(0,srb+3);
+				
+				olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
+
+				writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+		}
+
+		olympic_priv->olympic_lan_status = lan_status ; 
+	
+	}  /* Lan.change.status */
+	else
+		printk(KERN_WARNING "%s: Unknown arb command \n", dev->name);
+}
+
+static void olympic_asb_bh(struct net_device *dev) 
+{
+	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; 
+	u8 __iomem *arb_block, *asb_block ; 
+
+	arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ; 
+	asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ; 
+
+	if (olympic_priv->asb_queued == 1) {   /* Dropped through the first time */
+
+		writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */
+		writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */
+		writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */
+		writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */		
+
+		writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM);
+		olympic_priv->asb_queued = 2 ; 
+
+		return ; 
+	}
+
+	if (olympic_priv->asb_queued == 2) { 
+		switch (readb(asb_block+2)) {
+			case 0x01:
+				printk(KERN_WARNING "%s: Unrecognized command code \n", dev->name);
+				break ;
+			case 0x26:
+				printk(KERN_WARNING "%s: Unrecognized buffer address \n", dev->name);
+				break ;
+			case 0xFF:
+				/* Valid response, everything should be ok again */
+				break ;
+			default:
+				printk(KERN_WARNING "%s: Invalid return code in asb\n",dev->name);
+				break ;
+		}
+	}
+	olympic_priv->asb_queued = 0 ; 
+}
+ 
+static int olympic_change_mtu(struct net_device *dev, int mtu) 
+{
+	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv;
+	u16 max_mtu ; 
+
+	if (olympic_priv->olympic_ring_speed == 4)
+		max_mtu = 4500 ; 
+	else
+		max_mtu = 18000 ; 
+	
+	if (mtu > max_mtu)
+		return -EINVAL ; 
+	if (mtu < 100) 
+		return -EINVAL ; 
+
+	dev->mtu = mtu ; 
+	olympic_priv->pkt_buf_sz = mtu + TR_HLEN ; 
+
+	return 0 ; 
+}
+
+static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data)
+{
+	struct net_device *dev = (struct net_device *)data ; 
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+	u8 __iomem *oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ; 
+	u8 __iomem *opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ; 
+	int size = 0 ; 
+	int len=0;
+	off_t begin=0;
+	off_t pos=0;
+	
+	size = sprintf(buffer, 
+		"IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapter %s\n",dev->name);
+	size += sprintf(buffer+size, "\n%6s: Adapter Address   : Node Address      : Functional Addr\n",
+ 	   dev->name); 
+
+	size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x\n",
+	   dev->name,
+           dev->dev_addr[0],
+	   dev->dev_addr[1],
+	   dev->dev_addr[2],
+ 	   dev->dev_addr[3],
+	   dev->dev_addr[4],
+	   dev->dev_addr[5],
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)), 
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), 
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3));
+	 
+	size += sprintf(buffer+size, "\n%6s: Token Ring Parameters Table:\n", dev->name);
+
+	size += sprintf(buffer+size, "%6s: Physical Addr : Up Node Address   : Poll Address      : AccPri : Auth Src : Att Code :\n",
+	  dev->name) ; 
+	   
+	size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x   : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %04x   : %04x     :  %04x    :\n",
+	  dev->name,
+	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)),
+	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+3),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+3),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+4),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+5),
+	  swab16(readw(opt+offsetof(struct olympic_parameters_table, acc_priority))),
+	  swab16(readw(opt+offsetof(struct olympic_parameters_table, auth_source_class))),
+	  swab16(readw(opt+offsetof(struct olympic_parameters_table, att_code))));
+
+	size += sprintf(buffer+size, "%6s: Source Address    : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n",
+	  dev->name) ; 
+	
+	size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %04x  : %04x   : %04x   : %04x   : %04x    :     %04x     : \n",
+	  dev->name,
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)),
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+3),
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+4),
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+5),
+	  swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_type))),
+	  swab16(readw(opt+offsetof(struct olympic_parameters_table, major_vector))),
+	  swab16(readw(opt+offsetof(struct olympic_parameters_table, lan_status))),
+	  swab16(readw(opt+offsetof(struct olympic_parameters_table, local_ring))),
+	  swab16(readw(opt+offsetof(struct olympic_parameters_table, mon_error))),
+	  swab16(readw(opt+offsetof(struct olympic_parameters_table, frame_correl))));
+
+	size += sprintf(buffer+size, "%6s: Beacon Details :  Tx  :  Rx  : NAUN Node Address : NAUN Node Phys : \n",
+	  dev->name) ; 
+
+	size += sprintf(buffer+size, "%6s:                :  %02x  :  %02x  : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x    : \n",
+	  dev->name,
+	  swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_transmit))),
+	  swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_receive))),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+3),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+4),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+5),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+3));
+
+	len=size;
+	pos=begin+size;
+	if (pos<offset) {
+		len=0;
+		begin=pos;
+	}
+	*start=buffer+(offset-begin);	/* Start of wanted data */
+	len-=(offset-begin);		/* Start slop */
+	if(len>length)
+		len=length;		/* Ending slop */
+	return len;
+}
+
+static void __devexit olympic_remove_one(struct pci_dev *pdev) 
+{
+	struct net_device *dev = pci_get_drvdata(pdev) ; 
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+
+	if (olympic_priv->olympic_network_monitor) { 
+		char proc_name[20] ; 
+		strcpy(proc_name,"net/olympic_") ; 
+		strcat(proc_name,dev->name) ;
+		remove_proc_entry(proc_name,NULL); 
+	}
+	unregister_netdev(dev) ; 
+	iounmap(olympic_priv->olympic_mmio) ; 
+	iounmap(olympic_priv->olympic_lap) ; 
+	pci_release_regions(pdev) ;
+	pci_set_drvdata(pdev,NULL) ;  	
+	free_netdev(dev) ; 
+}
+
+static struct pci_driver olympic_driver = { 
+	.name		= "olympic",
+	.id_table	= olympic_pci_tbl,
+	.probe		= olympic_probe,
+	.remove		= __devexit_p(olympic_remove_one),
+};
+
+static int __init olympic_pci_init(void) 
+{
+	return pci_module_init (&olympic_driver) ; 
+}
+
+static void __exit olympic_pci_cleanup(void)
+{
+	pci_unregister_driver(&olympic_driver) ; 
+}	
+
+
+module_init(olympic_pci_init) ; 
+module_exit(olympic_pci_cleanup) ; 
+
+MODULE_LICENSE("GPL");