ixbmtr_cs: Move the IBM PCMCIA Token Ring driver

Move the IBM PCMCIA Token Ring driver into drivers/net/tokenring/ with
the other Token Ring drivers.  Made the necessary Kconfig and Makefile
changes as well.

CC: Mike Phillips <phillim@amtrak.com>
CC: Burt Silverman <burts@us.ibm.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

3 files changed, 394 insertions, 11 deletions

diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index c4137b0f808..0f701588c7e 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -6,7 +6,7 @@
 menuconfig TR
 	tristate "Token Ring driver support"
 	depends on NETDEVICES && !UML
-	depends on (PCI || ISA || MCA || CCW)
+	depends on (PCI || ISA || MCA || CCW || PCMCIA)
 	select LLC
 	help
 	  Token Ring is IBM's way of communication on a local network; the
@@ -20,6 +20,17 @@ menuconfig TR
 
 if TR
 
+config PCMCIA_IBMTR
+	tristate "IBM PCMCIA tokenring adapter support"
+	depends on IBMTR!=y && PCMCIA
+	---help---
+	  Say Y here if you intend to attach this type of Token Ring PCMCIA
+	  card to your computer. You then also need to say Y to "Token Ring
+	  driver support".
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ibmtr_cs.
+
 config IBMTR
 	tristate "IBM Tropic chipset based adapter support"
 	depends on ISA || MCA
diff --git a/drivers/net/tokenring/Makefile b/drivers/net/tokenring/Makefile
index c88b0a5e538..f1be8d97b7a 100644
--- a/drivers/net/tokenring/Makefile
+++ b/drivers/net/tokenring/Makefile
@@ -2,14 +2,15 @@
 # Makefile for drivers/net/tokenring
 #
 
-obj-$(CONFIG_IBMTR) 	+= ibmtr.o
-obj-$(CONFIG_IBMOL) 	+= olympic.o
-obj-$(CONFIG_IBMLS) 	+= lanstreamer.o
-obj-$(CONFIG_TMS380TR) 	+= tms380tr.o
-obj-$(CONFIG_ABYSS) 	+= abyss.o
-obj-$(CONFIG_MADGEMC) 	+= madgemc.o
-obj-$(CONFIG_PROTEON) 	+= proteon.o
-obj-$(CONFIG_TMSPCI) 	+= tmspci.o
-obj-$(CONFIG_SKISA) 	+= skisa.o
-obj-$(CONFIG_SMCTR) 	+= smctr.o
+obj-$(CONFIG_PCMCIA_IBMTR)	+= ibmtr_cs.o
+obj-$(CONFIG_IBMTR)	+= ibmtr.o
+obj-$(CONFIG_IBMOL)	+= olympic.o
+obj-$(CONFIG_IBMLS)	+= lanstreamer.o
+obj-$(CONFIG_TMS380TR)	+= tms380tr.o
+obj-$(CONFIG_ABYSS)	+= abyss.o
+obj-$(CONFIG_MADGEMC)	+= madgemc.o
+obj-$(CONFIG_PROTEON)	+= proteon.o
+obj-$(CONFIG_TMSPCI)	+= tmspci.o
+obj-$(CONFIG_SKISA)	+= skisa.o
+obj-$(CONFIG_SMCTR)	+= smctr.o
 obj-$(CONFIG_3C359)	+= 3c359.o
diff --git a/drivers/net/tokenring/ibmtr_cs.c b/drivers/net/tokenring/ibmtr_cs.c
new file mode 100644
index 00000000000..91b684630fc
--- /dev/null
+++ b/drivers/net/tokenring/ibmtr_cs.c
@@ -0,0 +1,371 @@
+/*======================================================================
+
+    A PCMCIA token-ring driver for IBM-based cards
+
+    This driver supports the IBM PCMCIA Token-Ring Card.
+    Written by Steve Kipisz, kipisz@vnet.ibm.com or
+                             bungy@ibm.net
+
+    Written 1995,1996.
+
+    This code is based on pcnet_cs.c from David Hinds.
+    
+    V2.2.0 February 1999 - Mike Phillips phillim@amtrak.com
+
+    Linux V2.2.x presented significant changes to the underlying
+    ibmtr.c code.  Mainly the code became a lot more organized and
+    modular.
+
+    This caused the old PCMCIA Token Ring driver to give up and go 
+    home early. Instead of just patching the old code to make it 
+    work, the PCMCIA code has been streamlined, updated and possibly
+    improved.
+
+    This code now only contains code required for the Card Services.
+    All we do here is set the card up enough so that the real ibmtr.c
+    driver can find it and work with it properly.
+
+    i.e. We set up the io port, irq, mmio memory and shared ram
+    memory.  This enables ibmtr_probe in ibmtr.c to find the card and
+    configure it as though it was a normal ISA and/or PnP card.
+
+    CHANGES
+
+    v2.2.5 April 1999 Mike Phillips (phillim@amtrak.com)
+    Obscure bug fix, required changed to ibmtr.c not ibmtr_cs.c
+    
+    v2.2.7 May 1999 Mike Phillips (phillim@amtrak.com)
+    Updated to version 2.2.7 to match the first version of the kernel
+    that the modification to ibmtr.c were incorporated into.
+    
+    v2.2.17 July 2000 Burt Silverman (burts@us.ibm.com)
+    Address translation feature of PCMCIA controller is usable so
+    memory windows can be placed in High memory (meaning above
+    0xFFFFF.)
+
+======================================================================*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/trdevice.h>
+#include <linux/ibmtr.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#define PCMCIA
+#include "ibmtr.c"
+
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+/* MMIO base address */
+static u_long mmiobase = 0xce000;
+
+/* SRAM base address */
+static u_long srambase = 0xd0000;
+
+/* SRAM size 8,16,32,64 */
+static u_long sramsize = 64;
+
+/* Ringspeed 4,16 */
+static int ringspeed = 16;
+
+module_param(mmiobase, ulong, 0);
+module_param(srambase, ulong, 0);
+module_param(sramsize, ulong, 0);
+module_param(ringspeed, int, 0);
+MODULE_LICENSE("GPL");
+
+/*====================================================================*/
+
+static int ibmtr_config(struct pcmcia_device *link);
+static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase);
+static void ibmtr_release(struct pcmcia_device *link);
+static void ibmtr_detach(struct pcmcia_device *p_dev);
+
+/*====================================================================*/
+
+typedef struct ibmtr_dev_t {
+	struct pcmcia_device	*p_dev;
+	struct net_device	*dev;
+	struct tok_info		*ti;
+} ibmtr_dev_t;
+
+static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) {
+	ibmtr_dev_t *info = dev_id;
+	struct net_device *dev = info->dev;
+	return tok_interrupt(irq, dev);
+};
+
+static int __devinit ibmtr_attach(struct pcmcia_device *link)
+{
+    ibmtr_dev_t *info;
+    struct net_device *dev;
+
+    dev_dbg(&link->dev, "ibmtr_attach()\n");
+
+    /* Create new token-ring device */
+    info = kzalloc(sizeof(*info), GFP_KERNEL);
+    if (!info) return -ENOMEM;
+    dev = alloc_trdev(sizeof(struct tok_info));
+    if (!dev) {
+	kfree(info);
+	return -ENOMEM;
+    }
+
+    info->p_dev = link;
+    link->priv = info;
+    info->ti = netdev_priv(dev);
+
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+    link->resource[0]->end = 4;
+    link->config_flags |= CONF_ENABLE_IRQ;
+    link->config_regs = PRESENT_OPTION;
+
+    info->dev = dev;
+
+    return ibmtr_config(link);
+} /* ibmtr_attach */
+
+static void ibmtr_detach(struct pcmcia_device *link)
+{
+    struct ibmtr_dev_t *info = link->priv;
+    struct net_device *dev = info->dev;
+     struct tok_info *ti = netdev_priv(dev);
+
+    dev_dbg(&link->dev, "ibmtr_detach\n");
+    
+    /* 
+     * When the card removal interrupt hits tok_interrupt(), 
+     * bail out early, so we don't crash the machine 
+     */
+    ti->sram_phys |= 1;
+
+    unregister_netdev(dev);
+    
+    del_timer_sync(&(ti->tr_timer));
+
+    ibmtr_release(link);
+
+    free_netdev(dev);
+    kfree(info);
+} /* ibmtr_detach */
+
+static int __devinit ibmtr_config(struct pcmcia_device *link)
+{
+    ibmtr_dev_t *info = link->priv;
+    struct net_device *dev = info->dev;
+    struct tok_info *ti = netdev_priv(dev);
+    int i, ret;
+
+    dev_dbg(&link->dev, "ibmtr_config\n");
+
+    link->io_lines = 16;
+    link->config_index = 0x61;
+
+    /* Determine if this is PRIMARY or ALTERNATE. */
+
+    /* Try PRIMARY card at 0xA20-0xA23 */
+    link->resource[0]->start = 0xA20;
+    i = pcmcia_request_io(link);
+    if (i != 0) {
+	/* Couldn't get 0xA20-0xA23.  Try ALTERNATE at 0xA24-0xA27. */
+	link->resource[0]->start = 0xA24;
+	ret = pcmcia_request_io(link);
+	if (ret)
+		goto failed;
+    }
+    dev->base_addr = link->resource[0]->start;
+
+    ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt);
+    if (ret)
+	    goto failed;
+    dev->irq = link->irq;
+    ti->irq = link->irq;
+    ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq);
+
+    /* Allocate the MMIO memory window */
+    link->resource[2]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
+    link->resource[2]->flags |= WIN_USE_WAIT;
+    link->resource[2]->start = 0;
+    link->resource[2]->end = 0x2000;
+    ret = pcmcia_request_window(link, link->resource[2], 250);
+    if (ret)
+	    goto failed;
+
+    ret = pcmcia_map_mem_page(link, link->resource[2], mmiobase);
+    if (ret)
+	    goto failed;
+    ti->mmio = ioremap(link->resource[2]->start,
+		    resource_size(link->resource[2]));
+
+    /* Allocate the SRAM memory window */
+    link->resource[3]->flags = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
+    link->resource[3]->flags |= WIN_USE_WAIT;
+    link->resource[3]->start = 0;
+    link->resource[3]->end = sramsize * 1024;
+    ret = pcmcia_request_window(link, link->resource[3], 250);
+    if (ret)
+	    goto failed;
+
+    ret = pcmcia_map_mem_page(link, link->resource[3], srambase);
+    if (ret)
+	    goto failed;
+
+    ti->sram_base = srambase >> 12;
+    ti->sram_virt = ioremap(link->resource[3]->start,
+		    resource_size(link->resource[3]));
+    ti->sram_phys = link->resource[3]->start;
+
+    ret = pcmcia_enable_device(link);
+    if (ret)
+	    goto failed;
+
+    /*  Set up the Token-Ring Controller Configuration Register and
+        turn on the card.  Check the "Local Area Network Credit Card
+        Adapters Technical Reference"  SC30-3585 for this info.  */
+    ibmtr_hw_setup(dev, mmiobase);
+
+    SET_NETDEV_DEV(dev, &link->dev);
+
+    i = ibmtr_probe_card(dev);
+    if (i != 0) {
+	pr_notice("register_netdev() failed\n");
+	goto failed;
+    }
+
+    netdev_info(dev, "port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n",
+		dev->base_addr, dev->irq,
+		(u_long)ti->mmio, (u_long)(ti->sram_base << 12),
+		dev->dev_addr);
+    return 0;
+
+failed:
+    ibmtr_release(link);
+    return -ENODEV;
+} /* ibmtr_config */
+
+static void ibmtr_release(struct pcmcia_device *link)
+{
+	ibmtr_dev_t *info = link->priv;
+	struct net_device *dev = info->dev;
+
+	dev_dbg(&link->dev, "ibmtr_release\n");
+
+	if (link->resource[2]->end) {
+		struct tok_info *ti = netdev_priv(dev);
+		iounmap(ti->mmio);
+	}
+	pcmcia_disable_device(link);
+}
+
+static int ibmtr_suspend(struct pcmcia_device *link)
+{
+	ibmtr_dev_t *info = link->priv;
+	struct net_device *dev = info->dev;
+
+	if (link->open)
+		netif_device_detach(dev);
+
+	return 0;
+}
+
+static int __devinit ibmtr_resume(struct pcmcia_device *link)
+{
+	ibmtr_dev_t *info = link->priv;
+	struct net_device *dev = info->dev;
+
+	if (link->open) {
+		ibmtr_probe(dev);	/* really? */
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+
+
+/*====================================================================*/
+
+static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase)
+{
+    int i;
+
+    /* Bizarre IBM behavior, there are 16 bits of information we
+       need to set, but the card only allows us to send 4 bits at a 
+       time.  For each byte sent to base_addr, bits 7-4 tell the
+       card which part of the 16 bits we are setting, bits 3-0 contain 
+       the actual information */
+
+    /* First nibble provides 4 bits of mmio */
+    i = (mmiobase >> 16) & 0x0F;
+    outb(i, dev->base_addr);
+
+    /* Second nibble provides 3 bits of mmio */
+    i = 0x10 | ((mmiobase >> 12) & 0x0E);
+    outb(i, dev->base_addr);
+
+    /* Third nibble, hard-coded values */
+    i = 0x26;
+    outb(i, dev->base_addr);
+
+    /* Fourth nibble sets shared ram page size */
+
+    /* 8 = 00, 16 = 01, 32 = 10, 64 = 11 */          
+    i = (sramsize >> 4) & 0x07;
+    i = ((i == 4) ? 3 : i) << 2;
+    i |= 0x30;
+
+    if (ringspeed == 16)
+	i |= 2;
+    if (dev->base_addr == 0xA24)
+	i |= 1;
+    outb(i, dev->base_addr);
+
+    /* 0x40 will release the card for use */
+    outb(0x40, dev->base_addr);
+}
+
+static const struct pcmcia_device_id ibmtr_ids[] = {
+	PCMCIA_DEVICE_PROD_ID12("3Com", "TokenLink Velocity PC Card", 0x41240e5b, 0x82c3734e),
+	PCMCIA_DEVICE_PROD_ID12("IBM", "TOKEN RING", 0xb569a6e5, 0xbf8eed47),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids);
+
+static struct pcmcia_driver ibmtr_cs_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "ibmtr_cs",
+	.probe		= ibmtr_attach,
+	.remove		= ibmtr_detach,
+	.id_table       = ibmtr_ids,
+	.suspend	= ibmtr_suspend,
+	.resume		= ibmtr_resume,
+};
+
+static int __init init_ibmtr_cs(void)
+{
+	return pcmcia_register_driver(&ibmtr_cs_driver);
+}
+
+static void __exit exit_ibmtr_cs(void)
+{
+	pcmcia_unregister_driver(&ibmtr_cs_driver);
+}
+
+module_init(init_ibmtr_cs);
+module_exit(exit_ibmtr_cs);