diff options
author | Joe Perches <joe@perches.com> | 2010-01-28 20:59:20 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-01-31 23:26:53 -0800 |
commit | dde7c8ef167996689bc464eb65d2b09ef05263c2 (patch) | |
tree | 61f5afff5e04b9f8fa50b1d3e6690bba53e0a2ba /drivers/net/tulip | |
parent | f639dc7dadcbd97f1d666d5ffe00eab1ea3c0f6d (diff) |
tulip/dmfe.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove 'DRV_NAME ": ' from logging messages
Convert commented out printks to pr_debug
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/tulip')
-rw-r--r-- | drivers/net/tulip/dmfe.c | 67 |
1 files changed, 31 insertions, 36 deletions
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 2d9f09c6189..5fc61c1012e 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -61,6 +61,8 @@ Test and make sure PCI latency is now correct for all cases. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define DRV_NAME "dmfe" #define DRV_VERSION "1.36.4" #define DRV_RELDATE "2002-01-17" @@ -149,16 +151,17 @@ #define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */ #define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */ -#define DMFE_DBUG(dbug_now, msg, value) \ - do { \ - if (dmfe_debug || (dbug_now)) \ - printk(KERN_ERR DRV_NAME ": %s %lx\n",\ - (msg), (long) (value)); \ +#define DMFE_DBUG(dbug_now, msg, value) \ + do { \ + if (dmfe_debug || (dbug_now)) \ + pr_err("%s %lx\n", \ + (msg), (long) (value)); \ } while (0) -#define SHOW_MEDIA_TYPE(mode) \ - printk (KERN_INFO DRV_NAME ": Change Speed to %sMhz %s duplex\n" , \ - (mode & 1) ? "100":"10", (mode & 4) ? "full":"half"); +#define SHOW_MEDIA_TYPE(mode) \ + pr_info("Change Speed to %sMhz %s duplex\n" , \ + (mode & 1) ? "100":"10", \ + (mode & 4) ? "full":"half"); /* CR9 definition: SROM/MII */ @@ -391,8 +394,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, struct device_node *dp = pci_device_to_OF_node(pdev); if (dp && of_get_property(dp, "local-mac-address", NULL)) { - printk(KERN_INFO DRV_NAME - ": skipping on-board DM910x (use tulip)\n"); + pr_info("skipping on-board DM910x (use tulip)\n"); return -ENODEV; } } @@ -405,8 +407,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, SET_NETDEV_DEV(dev, &pdev->dev); if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { - printk(KERN_WARNING DRV_NAME - ": 32-bit PCI DMA not available.\n"); + pr_warning("32-bit PCI DMA not available\n"); err = -ENODEV; goto err_out_free; } @@ -417,13 +418,13 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, goto err_out_free; if (!pci_resource_start(pdev, 0)) { - printk(KERN_ERR DRV_NAME ": I/O base is zero\n"); + pr_err("I/O base is zero\n"); err = -ENODEV; goto err_out_disable; } if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) { - printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n"); + pr_err("Allocated I/O size too small\n"); err = -ENODEV; goto err_out_disable; } @@ -438,7 +439,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, #endif if (pci_request_regions(pdev, DRV_NAME)) { - printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n"); + pr_err("Failed to request PCI regions\n"); err = -ENODEV; goto err_out_disable; } @@ -497,12 +498,9 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, if (err) goto err_out_free_buf; - printk(KERN_INFO "%s: Davicom DM%04lx at pci%s, %pM, irq %d.\n", - dev->name, - ent->driver_data >> 16, - pci_name(pdev), - dev->dev_addr, - dev->irq); + dev_info(&dev->dev, "Davicom DM%04lx at pci%s, %pM, irq %d\n", + ent->driver_data >> 16, + pci_name(pdev), dev->dev_addr, dev->irq); pci_set_master(pdev); @@ -696,7 +694,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb, /* Too large packet check */ if (skb->len > MAX_PACKET_SIZE) { - printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len); + pr_err("big packet = %d\n", (u16)skb->len); dev_kfree_skb(skb); return NETDEV_TX_OK; } @@ -706,8 +704,7 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb, /* No Tx resource check, it never happen nromally */ if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) { spin_unlock_irqrestore(&db->lock, flags); - printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", - db->tx_queue_cnt); + pr_err("No Tx resource %ld\n", db->tx_queue_cnt); return NETDEV_TX_BUSY; } @@ -779,12 +776,11 @@ static int dmfe_stop(struct DEVICE *dev) #if 0 /* show statistic counter */ - printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx" - " LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", - db->tx_fifo_underrun, db->tx_excessive_collision, - db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, - db->tx_jabber_timeout, db->reset_count, db->reset_cr8, - db->reset_fatal, db->reset_TXtimeout); + printk("FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", + db->tx_fifo_underrun, db->tx_excessive_collision, + db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, + db->tx_jabber_timeout, db->reset_count, db->reset_cr8, + db->reset_fatal, db->reset_TXtimeout); #endif return 0; @@ -885,7 +881,7 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db) txptr = db->tx_remove_ptr; while(db->tx_packet_cnt) { tdes0 = le32_to_cpu(txptr->tdes0); - /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + pr_debug("tdes0=%x\n", tdes0); if (tdes0 & 0x80000000) break; @@ -895,7 +891,7 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db) /* Transmit statistic counter */ if ( tdes0 != 0x7fffffff ) { - /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + pr_debug("tdes0=%x\n", tdes0); dev->stats.collisions += (tdes0 >> 3) & 0xf; dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; if (tdes0 & TDES0_ERR_MASK) { @@ -992,7 +988,7 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db) /* error summary bit check */ if (rdes0 & 0x8000) { /* This is a error packet */ - //printk(DRV_NAME ": rdes0: %lx\n", rdes0); + pr_debug("rdes0: %x\n", rdes0); dev->stats.rx_errors++; if (rdes0 & 1) dev->stats.rx_fifo_errors++; @@ -1191,8 +1187,7 @@ static void dmfe_timer(unsigned long data) if ( time_after(jiffies, dev->trans_start + DMFE_TX_TIMEOUT) ) { db->reset_TXtimeout++; db->wait_reset = 1; - printk(KERN_WARNING "%s: Tx timeout - resetting\n", - dev->name); + dev_warn(&dev->dev, "Tx timeout - resetting\n"); } } @@ -1646,7 +1641,7 @@ static u8 dmfe_sense_speed(struct dmfe_board_info * db) else /* DM9102/DM9102A */ phy_mode = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0xf000; - /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */ + pr_debug("Phy_mode %x\n", phy_mode); switch (phy_mode) { case 0x1000: db->op_mode = DMFE_10MHF; break; case 0x2000: db->op_mode = DMFE_10MFD; break; |