Merge tag 'regmap-3.4' into regmap-stride

regmap: Last minute bug fix for 3.4

This is a last minute bug fix that was only just noticed since the code
path that's being exercised here is one that is fairly rarely used.  The
changelog for the change itself is extremely clear and the code itself
is obvious to inspection so should be pretty safe.

Conflicts:
	drivers/base/regmap/regmap.c (overlap between the fix and stride code)

1 files changed, 25 insertions, 11 deletions

diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 187d01ccb97..00103a8c5e0 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -98,7 +98,7 @@ static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
 
 	if (unlikely(ret < 0))
 		netdev_warn(dev->net,
-			"Failed to read register index 0x%08x", index);
+			"Failed to read reg index 0x%08x: %d", index, ret);
 
 	le32_to_cpus(buf);
 	*data = *buf;
@@ -128,7 +128,7 @@ static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
 
 	if (unlikely(ret < 0))
 		netdev_warn(dev->net,
-			"Failed to write register index 0x%08x", index);
+			"Failed to write reg index 0x%08x: %d", index, ret);
 
 	kfree(buf);
 
@@ -171,7 +171,7 @@ static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
 	idx &= dev->mii.reg_num_mask;
 	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
 		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
-		| MII_ACCESS_READ;
+		| MII_ACCESS_READ | MII_ACCESS_BUSY;
 	ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
 	check_warn_goto_done(ret, "Error writing MII_ACCESS");
 
@@ -210,7 +210,7 @@ static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
 	idx &= dev->mii.reg_num_mask;
 	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
 		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
-		| MII_ACCESS_WRITE;
+		| MII_ACCESS_WRITE | MII_ACCESS_BUSY;
 	ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
 	check_warn_goto_done(ret, "Error writing MII_ACCESS");
 
@@ -508,9 +508,10 @@ static int smsc75xx_link_reset(struct usbnet *dev)
 	u16 lcladv, rmtadv;
 	int ret;
 
-	/* clear interrupt status */
+	/* read and write to clear phy interrupt status */
 	ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
 	check_warn_return(ret, "Error reading PHY_INT_SRC");
+	smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC, 0xffff);
 
 	ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
 	check_warn_return(ret, "Error writing INT_STS");
@@ -643,7 +644,7 @@ static int smsc75xx_set_mac_address(struct usbnet *dev)
 
 static int smsc75xx_phy_initialize(struct usbnet *dev)
 {
-	int bmcr, timeout = 0;
+	int bmcr, ret, timeout = 0;
 
 	/* Initialize MII structure */
 	dev->mii.dev = dev->net;
@@ -651,6 +652,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev)
 	dev->mii.mdio_write = smsc75xx_mdio_write;
 	dev->mii.phy_id_mask = 0x1f;
 	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.supports_gmii = 1;
 	dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
 
 	/* reset phy and wait for reset to complete */
@@ -661,7 +663,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev)
 		bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
 		check_warn_return(bmcr, "Error reading MII_BMCR");
 		timeout++;
-	} while ((bmcr & MII_BMCR) && (timeout < 100));
+	} while ((bmcr & BMCR_RESET) && (timeout < 100));
 
 	if (timeout >= 100) {
 		netdev_warn(dev->net, "timeout on PHY Reset");
@@ -671,10 +673,13 @@ static int smsc75xx_phy_initialize(struct usbnet *dev)
 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
 		ADVERTISE_PAUSE_ASYM);
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
+		ADVERTISE_1000FULL);
 
-	/* read to clear */
-	smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
-	check_warn_return(bmcr, "Error reading PHY_INT_SRC");
+	/* read and write to clear phy interrupt status */
+	ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
+	check_warn_return(ret, "Error reading PHY_INT_SRC");
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff);
 
 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
 		PHY_INT_MASK_DEFAULT);
@@ -946,6 +951,14 @@ static int smsc75xx_reset(struct usbnet *dev)
 	ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
 	check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret);
 
+	/* allow mac to detect speed and duplex from phy */
+	ret = smsc75xx_read_reg(dev, MAC_CR, &buf);
+	check_warn_return(ret, "Failed to read MAC_CR: %d", ret);
+
+	buf |= (MAC_CR_ADD | MAC_CR_ASD);
+	ret = smsc75xx_write_reg(dev, MAC_CR, buf);
+	check_warn_return(ret, "Failed to write MAC_CR: %d", ret);
+
 	ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
 	check_warn_return(ret, "Failed to read MAC_TX: %d", ret);
 
@@ -1051,6 +1064,7 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
 	dev->net->flags |= IFF_MULTICAST;
 	dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
 	return 0;
 }
 
@@ -1211,7 +1225,7 @@ static const struct driver_info smsc75xx_info = {
 	.rx_fixup	= smsc75xx_rx_fixup,
 	.tx_fixup	= smsc75xx_tx_fixup,
 	.status		= smsc75xx_status,
-	.flags		= FLAG_ETHER | FLAG_SEND_ZLP,
+	.flags		= FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
 };
 
 static const struct usb_device_id products[] = {