diff options
| author | Ingo Molnar <mingo@elte.hu> | 2009-05-11 14:44:27 +0200 |
|---|---|---|
| committer | Ingo Molnar <mingo@elte.hu> | 2009-05-11 14:44:31 +0200 |
| commit | 41fb454ebe6024f5c1e3b3cbc0abc0da762e7b51 (patch) | |
| tree | 51c50bcb67a5039448ddfa1869d7948cab1217e9 /drivers/net/usb/smsc95xx.c | |
| parent | 19c1a6f5764d787113fa323ffb18be7991208f82 (diff) | |
| parent | 091bf7624d1c90cec9e578a18529f615213ff847 (diff) | |
Merge commit 'v2.6.30-rc5' into core/iommu
Merge reason: core/iommu was on an .30-rc1 base,
update it to .30-rc5 to refresh.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'drivers/net/usb/smsc95xx.c')
| -rw-r--r-- | drivers/net/usb/smsc95xx.c | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index dc166532659..5a7283372b5 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -941,6 +941,16 @@ static int smsc95xx_reset(struct usbnet *dev) if (netif_msg_ifup(dev)) devdbg(dev, "ID_REV = 0x%08x", read_buf); + /* Configure GPIO pins as LED outputs */ + write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED | + LED_GPIO_CFG_FDX_LED; + ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf); + if (ret < 0) { + devwarn(dev, "Failed to write LED_GPIO_CFG register, ret=%d", + ret); + return ret; + } + /* Init Tx */ write_buf = 0; ret = smsc95xx_write_reg(dev, FLOW, write_buf); @@ -1231,6 +1241,11 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0424, 0x9500), .driver_info = (unsigned long) &smsc95xx_info, }, + { + /* SMSC9512/9514 USB Hub & Ethernet Device */ + USB_DEVICE(0x0424, 0xec00), + .driver_info = (unsigned long) &smsc95xx_info, + }, { }, /* END */ }; MODULE_DEVICE_TABLE(usb, products); |