diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-10-23 11:47:02 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-10-23 11:47:02 -0700 |
commit | 5f05647dd81c11a6a165ccc8f0c1370b16f3bcb0 (patch) | |
tree | 7851ef1c93aa1aba7ef327ca4b75fd35e6d10f29 /drivers/net/usb | |
parent | 02f36038c568111ad4fc433f6fa760ff5e38fab4 (diff) | |
parent | ec37a48d1d16c30b655ac5280209edf52a6775d4 (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits)
bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.
vlan: Calling vlan_hwaccel_do_receive() is always valid.
tproxy: use the interface primary IP address as a default value for --on-ip
tproxy: added IPv6 support to the socket match
cxgb3: function namespace cleanup
tproxy: added IPv6 support to the TPROXY target
tproxy: added IPv6 socket lookup function to nf_tproxy_core
be2net: Changes to use only priority codes allowed by f/w
tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled
tproxy: added tproxy sockopt interface in the IPV6 layer
tproxy: added udp6_lib_lookup function
tproxy: added const specifiers to udp lookup functions
tproxy: split off ipv6 defragmentation to a separate module
l2tp: small cleanup
nf_nat: restrict ICMP translation for embedded header
can: mcp251x: fix generation of error frames
can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set
can-raw: add msg_flags to distinguish local traffic
9p: client code cleanup
rds: make local functions/variables static
...
Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and
drivers/net/wireless/ath/ath9k/debug.c as per David
Diffstat (limited to 'drivers/net/usb')
-rw-r--r-- | drivers/net/usb/Kconfig | 8 | ||||
-rw-r--r-- | drivers/net/usb/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/usb/cx82310_eth.c | 346 | ||||
-rw-r--r-- | drivers/net/usb/hso.c | 9 | ||||
-rw-r--r-- | drivers/net/usb/kaweth.c | 9 | ||||
-rw-r--r-- | drivers/net/usb/sierra_net.c | 4 | ||||
-rw-r--r-- | drivers/net/usb/smsc95xx.c | 4 |
7 files changed, 359 insertions, 22 deletions
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index d7b7018a1de..52ffabe6db0 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -358,6 +358,14 @@ config USB_NET_ZAURUS really need this non-conformant variant of CDC Ethernet (or in some cases CDC MDLM) protocol, not "g_ether". +config USB_NET_CX82310_ETH + tristate "Conexant CX82310 USB ethernet port" + depends on USB_USBNET + help + Choose this option if you're using a Conexant CX82310-based ADSL + router with USB ethernet port. This driver is for routers only, + it will not work with ADSL modems (use cxacru driver instead). + config USB_HSO tristate "Option USB High Speed Mobile Devices" depends on USB && RFKILL diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index b13a279663b..a19b0259ae1 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -25,4 +25,5 @@ obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o obj-$(CONFIG_USB_IPHETH) += ipheth.o obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o +obj-$(CONFIG_USB_NET_CX82310_ETH) += cx82310_eth.o diff --git a/drivers/net/usb/cx82310_eth.c b/drivers/net/usb/cx82310_eth.c new file mode 100644 index 00000000000..8969f124c18 --- /dev/null +++ b/drivers/net/usb/cx82310_eth.c @@ -0,0 +1,346 @@ +/* + * Driver for USB ethernet port of Conexant CX82310-based ADSL routers + * Copyright (C) 2010 by Ondrej Zary + * some parts inspired by the cxacru driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/usb/usbnet.h> + +enum cx82310_cmd { + CMD_START = 0x84, /* no effect? */ + CMD_STOP = 0x85, /* no effect? */ + CMD_GET_STATUS = 0x90, /* returns nothing? */ + CMD_GET_MAC_ADDR = 0x91, /* read MAC address */ + CMD_GET_LINK_STATUS = 0x92, /* not useful, link is always up */ + CMD_ETHERNET_MODE = 0x99, /* unknown, needed during init */ +}; + +enum cx82310_status { + STATUS_UNDEFINED, + STATUS_SUCCESS, + STATUS_ERROR, + STATUS_UNSUPPORTED, + STATUS_UNIMPLEMENTED, + STATUS_PARAMETER_ERROR, + STATUS_DBG_LOOPBACK, +}; + +#define CMD_PACKET_SIZE 64 +/* first command after power on can take around 8 seconds */ +#define CMD_TIMEOUT 15000 +#define CMD_REPLY_RETRY 5 + +#define CX82310_MTU 1514 +#define CMD_EP 0x01 + +/* + * execute control command + * - optionally send some data (command parameters) + * - optionally wait for the reply + * - optionally read some data from the reply + */ +static int cx82310_cmd(struct usbnet *dev, enum cx82310_cmd cmd, bool reply, + u8 *wdata, int wlen, u8 *rdata, int rlen) +{ + int actual_len, retries, ret; + struct usb_device *udev = dev->udev; + u8 *buf = kzalloc(CMD_PACKET_SIZE, GFP_KERNEL); + + if (!buf) + return -ENOMEM; + + /* create command packet */ + buf[0] = cmd; + if (wdata) + memcpy(buf + 4, wdata, min_t(int, wlen, CMD_PACKET_SIZE - 4)); + + /* send command packet */ + ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, CMD_EP), buf, + CMD_PACKET_SIZE, &actual_len, CMD_TIMEOUT); + if (ret < 0) { + dev_err(&dev->udev->dev, "send command %#x: error %d\n", + cmd, ret); + goto end; + } + + if (reply) { + /* wait for reply, retry if it's empty */ + for (retries = 0; retries < CMD_REPLY_RETRY; retries++) { + ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, CMD_EP), + buf, CMD_PACKET_SIZE, &actual_len, + CMD_TIMEOUT); + if (ret < 0) { + dev_err(&dev->udev->dev, + "reply receive error %d\n", ret); + goto end; + } + if (actual_len > 0) + break; + } + if (actual_len == 0) { + dev_err(&dev->udev->dev, "no reply to command %#x\n", + cmd); + ret = -EIO; + goto end; + } + if (buf[0] != cmd) { + dev_err(&dev->udev->dev, + "got reply to command %#x, expected: %#x\n", + buf[0], cmd); + ret = -EIO; + goto end; + } + if (buf[1] != STATUS_SUCCESS) { + dev_err(&dev->udev->dev, "command %#x failed: %#x\n", + cmd, buf[1]); + ret = -EIO; + goto end; + } + if (rdata) + memcpy(rdata, buf + 4, + min_t(int, rlen, CMD_PACKET_SIZE - 4)); + } +end: + kfree(buf); + return ret; +} + +#define partial_len data[0] /* length of partial packet data */ +#define partial_rem data[1] /* remaining (missing) data length */ +#define partial_data data[2] /* partial packet data */ + +static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret; + char buf[15]; + struct usb_device *udev = dev->udev; + + /* avoid ADSL modems - continue only if iProduct is "USB NET CARD" */ + if (usb_string(udev, udev->descriptor.iProduct, buf, sizeof(buf)) > 0 + && strcmp(buf, "USB NET CARD")) { + dev_info(&udev->dev, "ignoring: probably an ADSL modem\n"); + return -ENODEV; + } + + ret = usbnet_get_endpoints(dev, intf); + if (ret) + return ret; + + /* + * this must not include ethernet header as the device can send partial + * packets with no header (and sometimes even empty URBs) + */ + dev->net->hard_header_len = 0; + /* we can send at most 1514 bytes of data (+ 2-byte header) per URB */ + dev->hard_mtu = CX82310_MTU + 2; + /* we can receive URBs up to 4KB from the device */ + dev->rx_urb_size = 4096; + + dev->partial_data = (unsigned long) kmalloc(dev->hard_mtu, GFP_KERNEL); + if (!dev->partial_data) + return -ENOMEM; + + /* enable ethernet mode (?) */ + ret = cx82310_cmd(dev, CMD_ETHERNET_MODE, true, "\x01", 1, NULL, 0); + if (ret) { + dev_err(&udev->dev, "unable to enable ethernet mode: %d\n", + ret); + goto err; + } + + /* get the MAC address */ + ret = cx82310_cmd(dev, CMD_GET_MAC_ADDR, true, NULL, 0, + dev->net->dev_addr, ETH_ALEN); + if (ret) { + dev_err(&udev->dev, "unable to read MAC address: %d\n", ret); + goto err; + } + + /* start (does not seem to have any effect?) */ + ret = cx82310_cmd(dev, CMD_START, false, NULL, 0, NULL, 0); + if (ret) + goto err; + + return 0; +err: + kfree((void *)dev->partial_data); + return ret; +} + +static void cx82310_unbind(struct usbnet *dev, struct usb_interface *intf) +{ + kfree((void *)dev->partial_data); +} + +/* + * RX is NOT easy - we can receive multiple packets per skb, each having 2-byte + * packet length at the beginning. + * The last packet might be incomplete (when it crosses the 4KB URB size), + * continuing in the next skb (without any headers). + * If a packet has odd length, there is one extra byte at the end (before next + * packet or at the end of the URB). + */ +static int cx82310_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + int len; + struct sk_buff *skb2; + + /* + * If the last skb ended with an incomplete packet, this skb contains + * end of that packet at the beginning. + */ + if (dev->partial_rem) { + len = dev->partial_len + dev->partial_rem; + skb2 = alloc_skb(len, GFP_ATOMIC); + if (!skb2) + return 0; + skb_put(skb2, len); + memcpy(skb2->data, (void *)dev->partial_data, + dev->partial_len); + memcpy(skb2->data + dev->partial_len, skb->data, + dev->partial_rem); + usbnet_skb_return(dev, skb2); + skb_pull(skb, (dev->partial_rem + 1) & ~1); + dev->partial_rem = 0; + if (skb->len < 2) + return 1; + } + + /* a skb can contain multiple packets */ + while (skb->len > 1) { + /* first two bytes are packet length */ + len = skb->data[0] | (skb->data[1] << 8); + skb_pull(skb, 2); + + /* if last packet in the skb, let usbnet to process it */ + if (len == skb->len || len + 1 == skb->len) { + skb_trim(skb, len); + break; + } + + if (len > CX82310_MTU) { + dev_err(&dev->udev->dev, "RX packet too long: %d B\n", + len); + return 0; + } + + /* incomplete packet, save it for the next skb */ + if (len > skb->len) { + dev->partial_len = skb->len; + dev->partial_rem = len - skb->len; + memcpy((void *)dev->partial_data, skb->data, + dev->partial_len); + skb_pull(skb, skb->len); + break; + } + + skb2 = alloc_skb(len, GFP_ATOMIC); + if (!skb2) + return 0; + skb_put(skb2, len); + memcpy(skb2->data, skb->data, len); + /* process the packet */ + usbnet_skb_return(dev, skb2); + + skb_pull(skb, (len + 1) & ~1); + } + + /* let usbnet process the last packet */ + return 1; +} + +/* TX is easy, just add 2 bytes of length at the beginning */ +static struct sk_buff *cx82310_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + int len = skb->len; + + if (skb_headroom(skb) < 2) { + struct sk_buff *skb2 = skb_copy_expand(skb, 2, 0, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return NULL; + } + skb_push(skb, 2); + + skb->data[0] = len; + skb->data[1] = len >> 8; + + return skb; +} + + +static const struct driver_info cx82310_info = { + .description = "Conexant CX82310 USB ethernet", + .flags = FLAG_ETHER, + .bind = cx82310_bind, + .unbind = cx82310_unbind, + .rx_fixup = cx82310_rx_fixup, + .tx_fixup = cx82310_tx_fixup, +}; + +#define USB_DEVICE_CLASS(vend, prod, cl, sc, pr) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_DEV_INFO, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bDeviceClass = (cl), \ + .bDeviceSubClass = (sc), \ + .bDeviceProtocol = (pr) + +static const struct usb_device_id products[] = { + { + USB_DEVICE_CLASS(0x0572, 0xcb01, 0xff, 0, 0), + .driver_info = (unsigned long) &cx82310_info + }, + { }, +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver cx82310_driver = { + .name = "cx82310_eth", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, +}; + +static int __init cx82310_init(void) +{ + return usb_register(&cx82310_driver); +} +module_init(cx82310_init); + +static void __exit cx82310_exit(void) +{ + usb_deregister(&cx82310_driver); +} +module_exit(cx82310_exit); + +MODULE_AUTHOR("Ondrej Zary"); +MODULE_DESCRIPTION("Conexant CX82310-based ADSL router USB ethernet driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index b8e95724913..b154a94de03 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -843,16 +843,7 @@ static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb, return NETDEV_TX_OK; } -static void hso_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) -{ - struct hso_net *odev = netdev_priv(net); - - strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN); - usb_make_path(odev->parent->usb, info->bus_info, sizeof info->bus_info); -} - static const struct ethtool_ops ops = { - .get_drvinfo = hso_get_drvinfo, .get_link = ethtool_op_get_link }; diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 2b7b39cad1c..5e98643a4a2 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -759,14 +759,6 @@ static int kaweth_close(struct net_device *net) return 0; } -static void kaweth_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct kaweth_device *kaweth = netdev_priv(dev); - - strlcpy(info->driver, driver_name, sizeof(info->driver)); - usb_make_path(kaweth->dev, info->bus_info, sizeof (info->bus_info)); -} - static u32 kaweth_get_link(struct net_device *dev) { struct kaweth_device *kaweth = netdev_priv(dev); @@ -775,7 +767,6 @@ static u32 kaweth_get_link(struct net_device *dev) } static const struct ethtool_ops ops = { - .get_drvinfo = kaweth_get_drvinfo, .get_link = kaweth_get_link }; diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index ee85c8b9a85..d1ac15c95fa 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -203,7 +203,7 @@ static inline void sierra_net_set_private(struct usbnet *dev, /* is packet IPv4 */ static inline int is_ip(struct sk_buff *skb) { - return (skb->protocol == cpu_to_be16(ETH_P_IP)); + return skb->protocol == cpu_to_be16(ETH_P_IP); } /* @@ -354,7 +354,7 @@ static void sierra_net_set_ctx_index(struct sierra_net_data *priv, u8 ctx_ix) static inline int sierra_net_is_valid_addrlen(u8 len) { - return (len == sizeof(struct in_addr)); + return len == sizeof(struct in_addr); } static int sierra_net_parse_lsi(struct usbnet *dev, char *data, int datalen) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 12a3c88c528..65cb1abfbe5 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -805,8 +805,6 @@ static int smsc95xx_reset(struct usbnet *dev) return ret; } - smsc95xx_init_mac_address(dev); - ret = smsc95xx_set_mac_address(dev); if (ret < 0) return ret; @@ -1047,6 +1045,8 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf) pdata->use_tx_csum = DEFAULT_TX_CSUM_ENABLE; pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE; + smsc95xx_init_mac_address(dev); + /* Init all registers */ ret = smsc95xx_reset(dev); |