Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:
 "Noteworthy changes this time around:

   1) Multicast rejoin support for team driver, from Jiri Pirko.

   2) Centralize and simplify TCP RTT measurement handling in order to
      reduce the impact of bad RTO seeding from SYN/ACKs.  Also, when
      both timestamps and local RTT measurements are available prefer
      the later because there are broken middleware devices which
      scramble the timestamp.

      From Yuchung Cheng.

   3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel
      memory consumed to queue up unsend user data.  From Eric Dumazet.

   4) Add a "physical port ID" abstraction for network devices, from
      Jiri Pirko.

   5) Add a "suppress" operation to influence fib_rules lookups, from
      Stefan Tomanek.

   6) Add a networking development FAQ, from Paul Gortmaker.

   7) Extend the information provided by tcp_probe and add ipv6 support,
      from Daniel Borkmann.

   8) Use RCU locking more extensively in openvswitch data paths, from
      Pravin B Shelar.

   9) Add SCTP support to openvswitch, from Joe Stringer.

  10) Add EF10 chip support to SFC driver, from Ben Hutchings.

  11) Add new SYNPROXY netfilter target, from Patrick McHardy.

  12) Compute a rate approximation for sending in TCP sockets, and use
      this to more intelligently coalesce TSO frames.  Furthermore, add
      a new packet scheduler which takes advantage of this estimate when
      available.  From Eric Dumazet.

  13) Allow AF_PACKET fanouts with random selection, from Daniel
      Borkmann.

  14) Add ipv6 support to vxlan driver, from Cong Wang"

Resolved conflicts as per discussion.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits)
  openvswitch: Fix alignment of struct sw_flow_key.
  netfilter: Fix build errors with xt_socket.c
  tcp: Add missing braces to do_tcp_setsockopt
  caif: Add missing braces to multiline if in cfctrl_linkup_request
  bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize
  vxlan: Fix kernel panic on device delete.
  net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
  net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
  icplus: Use netif_running to determine device state
  ethernet/arc/arc_emac: Fix huge delays in large file copies
  tuntap: orphan frags before trying to set tx timestamp
  tuntap: purge socket error queue on detach
  qlcnic: use standard NAPI weights
  ipv6:introduce function to find route for redirect
  bnx2x: VF RSS support - VF side
  bnx2x: VF RSS support - PF side
  vxlan: Notify drivers for listening UDP port changes
  net: usbnet: update addr_assign_type if appropriate
  driver/net: enic: update enic maintainers and driver
  driver/net: enic: Exposing symbols for Cisco's low latency driver
  ...

11 files changed, 1469 insertions, 217 deletions

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index d84bfd4109a..40db3123331 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -268,6 +268,14 @@ config USB_NET_DM9601
 	  This option adds support for Davicom DM9601 based USB 1.1
 	  10/100 Ethernet adapters.
 
+config USB_NET_SR9700
+	tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
+	depends on USB_USBNET
+	select CRC32
+	help
+	  This option adds support for CoreChip-sz SR9700 based USB 1.1
+	  10/100 Ethernet adapters.
+
 config USB_NET_SMSC75XX
 	tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
 	depends on USB_USBNET
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index e8171784529..8b342cf992f 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_NET_AX88179_178A)      += ax88179_178a.o
 obj-$(CONFIG_USB_NET_CDCETHER)	+= cdc_ether.o r815x.o
 obj-$(CONFIG_USB_NET_CDC_EEM)	+= cdc_eem.o
 obj-$(CONFIG_USB_NET_DM9601)	+= dm9601.o
+obj-$(CONFIG_USB_NET_SR9700)	+= sr9700.o
 obj-$(CONFIG_USB_NET_SMSC75XX)	+= smsc75xx.o
 obj-$(CONFIG_USB_NET_SMSC95XX)	+= smsc95xx.o
 obj-$(CONFIG_USB_NET_GL620A)	+= gl620a.o
diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
index 346c032aa79..bdaa12d07a1 100644
--- a/drivers/net/usb/asix.h
+++ b/drivers/net/usb/asix.h
@@ -178,6 +178,8 @@ struct asix_common_private {
 	struct asix_rx_fixup_info rx_fixup_info;
 };
 
+extern const struct driver_info ax88172a_info;
+
 /* ASIX specific flags */
 #define FLAG_EEPROM_MAC		(1UL << 0)  /* init device MAC from eeprom */
 
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index ad5d1e4384d..386a3df5367 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -778,6 +778,9 @@ static int ax88178_change_mtu(struct net_device *net, int new_mtu)
 	dev->hard_mtu = net->mtu + net->hard_header_len;
 	ax88178_set_mfb(dev);
 
+	/* max qlen depend on hard_mtu and rx_urb_size */
+	usbnet_update_max_qlen(dev);
+
 	return 0;
 }
 
@@ -943,8 +946,6 @@ static const struct driver_info hg20f9_info = {
 	.data = FLAG_EEPROM_MAC,
 };
 
-extern const struct driver_info ax88172a_info;
-
 static const struct usb_device_id	products [] = {
 {
 	// Linksys USB200M
diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
index d012203b0f2..723b3879ecc 100644
--- a/drivers/net/usb/ax88172a.c
+++ b/drivers/net/usb/ax88172a.c
@@ -161,7 +161,8 @@ static const struct net_device_ops ax88172a_netdev_ops = {
 	.ndo_set_rx_mode        = asix_set_multicast,
 };
 
-int ax88172a_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+static int ax88172a_get_settings(struct net_device *net,
+				 struct ethtool_cmd *cmd)
 {
 	if (!net->phydev)
 		return -ENODEV;
@@ -169,7 +170,8 @@ int ax88172a_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
 	return phy_ethtool_gset(net->phydev, cmd);
 }
 
-int ax88172a_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+static int ax88172a_set_settings(struct net_device *net,
+				 struct ethtool_cmd *cmd)
 {
 	if (!net->phydev)
 		return -ENODEV;
@@ -177,7 +179,7 @@ int ax88172a_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
 	return phy_ethtool_sset(net->phydev, cmd);
 }
 
-int ax88172a_nway_reset(struct net_device *net)
+static int ax88172a_nway_reset(struct net_device *net)
 {
 	if (!net->phydev)
 		return -ENODEV;
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 4233c05a3e3..3569293df87 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -688,6 +688,9 @@ static int ax88179_change_mtu(struct net_device *net, int new_mtu)
 				  2, 2, &tmp16);
 	}
 
+	/* max qlen depend on hard_mtu and rx_urb_size */
+	usbnet_update_max_qlen(dev);
+
 	return 0;
 }
 
@@ -1174,31 +1177,18 @@ ax88179_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
 	int frame_size = dev->maxpacket;
 	int mss = skb_shinfo(skb)->gso_size;
 	int headroom;
-	int tailroom;
 
 	tx_hdr1 = skb->len;
 	tx_hdr2 = mss;
 	if (((skb->len + 8) % frame_size) == 0)
 		tx_hdr2 |= 0x80008000;	/* Enable padding */
 
-	headroom = skb_headroom(skb);
-	tailroom = skb_tailroom(skb);
-
-	if (!skb_header_cloned(skb) &&
-	    !skb_cloned(skb) &&
-	    (headroom + tailroom) >= 8) {
-		if (headroom < 8) {
-			skb->data = memmove(skb->head + 8, skb->data, skb->len);
-			skb_set_tail_pointer(skb, skb->len);
-		}
-	} else {
-		struct sk_buff *skb2;
+	headroom = skb_headroom(skb) - 8;
 
-		skb2 = skb_copy_expand(skb, 8, 0, flags);
+	if ((skb_header_cloned(skb) || headroom < 0) &&
+	    pskb_expand_head(skb, headroom < 0 ? 8 : 0, 0, GFP_ATOMIC)) {
 		dev_kfree_skb_any(skb);
-		skb = skb2;
-		if (!skb)
-			return NULL;
+		return NULL;
 	}
 
 	skb_push(skb, 4);
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 606eba2872b..3a8131582e7 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -323,7 +323,7 @@ next_desc:
 	/* Never use the same address on both ends of the link, even
 	 * if the buggy firmware told us to.
 	 */
-	if (!compare_ether_addr(dev->net->dev_addr, default_modem_addr))
+	if (ether_addr_equal(dev->net->dev_addr, default_modem_addr))
 		eth_hw_addr_random(dev->net);
 
 	/* make MAC addr easily distinguishable from an IP header */
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 11c51f27536..f3fce412c0c 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -19,9 +19,12 @@
 #include <linux/crc32.h>
 #include <linux/if_vlan.h>
 #include <linux/uaccess.h>
+#include <linux/list.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
 
 /* Version Information */
-#define DRIVER_VERSION "v1.0.0 (2013/05/03)"
+#define DRIVER_VERSION "v1.01.0 (2013/08/12)"
 #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
 #define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
 #define MODULENAME "r8152"
@@ -267,6 +270,12 @@ enum rtl_register_content {
 	FULL_DUP	= 0x01,
 };
 
+#define RTL8152_MAX_TX		10
+#define RTL8152_MAX_RX		10
+#define INTBUFSIZE		2
+
+#define INTR_LINK		0x0004
+
 #define RTL8152_REQT_READ	0xc0
 #define RTL8152_REQT_WRITE	0x40
 #define RTL8152_REQ_GET_REGS	0x05
@@ -285,9 +294,9 @@ enum rtl_register_content {
 /* rtl8152 flags */
 enum rtl8152_flags {
 	RTL8152_UNPLUG = 0,
-	RX_URB_FAIL,
 	RTL8152_SET_RX_MODE,
-	WORK_ENABLE
+	WORK_ENABLE,
+	RTL8152_LINK_CHG,
 };
 
 /* Define these values to match your device */
@@ -311,21 +320,53 @@ struct tx_desc {
 	u32 opts1;
 #define TX_FS			(1 << 31) /* First segment of a packet */
 #define TX_LS			(1 << 30) /* Final segment of a packet */
-#define TX_LEN_MASK		0xffff
+#define TX_LEN_MASK		0x3ffff
+
 	u32 opts2;
+#define UDP_CS			(1 << 31) /* Calculate UDP/IP checksum */
+#define TCP_CS			(1 << 30) /* Calculate TCP/IP checksum */
+#define IPV4_CS			(1 << 29) /* Calculate IPv4 checksum */
+#define IPV6_CS			(1 << 28) /* Calculate IPv6 checksum */
+};
+
+struct r8152;
+
+struct rx_agg {
+	struct list_head list;
+	struct urb *urb;
+	struct r8152 *context;
+	void *buffer;
+	void *head;
+};
+
+struct tx_agg {
+	struct list_head list;
+	struct urb *urb;
+	struct r8152 *context;
+	void *buffer;
+	void *head;
+	u32 skb_num;
+	u32 skb_len;
 };
 
 struct r8152 {
 	unsigned long flags;
 	struct usb_device *udev;
 	struct tasklet_struct tl;
+	struct usb_interface *intf;
 	struct net_device *netdev;
-	struct urb *rx_urb, *tx_urb;
-	struct sk_buff *tx_skb, *rx_skb;
+	struct urb *intr_urb;
+	struct tx_agg tx_info[RTL8152_MAX_TX];
+	struct rx_agg rx_info[RTL8152_MAX_RX];
+	struct list_head rx_done, tx_free;
+	struct sk_buff_head tx_queue;
+	spinlock_t rx_lock, tx_lock;
 	struct delayed_work schedule;
 	struct mii_if_info mii;
+	int intr_interval;
 	u32 msg_enable;
 	u16 ocp_base;
+	u8 *intr_buff;
 	u8 version;
 	u8 speed;
 };
@@ -340,6 +381,7 @@ enum rtl_version {
  * The RTL chips use a 64 element hash table based on the Ethernet CRC.
  */
 static const int multicast_filter_limit = 32;
+static unsigned int rx_buf_sz = 16384;
 
 static
 int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
@@ -686,6 +728,9 @@ static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
 	ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data);
 }
 
+static
+int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
+
 static inline void set_ethernet_addr(struct r8152 *tp)
 {
 	struct net_device *dev = tp->netdev;
@@ -716,26 +761,6 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
 	return 0;
 }
 
-static int alloc_all_urbs(struct r8152 *tp)
-{
-	tp->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!tp->rx_urb)
-		return 0;
-	tp->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!tp->tx_urb) {
-		usb_free_urb(tp->rx_urb);
-		return 0;
-	}
-
-	return 1;
-}
-
-static void free_all_urbs(struct r8152 *tp)
-{
-	usb_free_urb(tp->rx_urb);
-	usb_free_urb(tp->tx_urb);
-}
-
 static struct net_device_stats *rtl8152_get_stats(struct net_device *dev)
 {
 	return &dev->stats;
@@ -743,137 +768,574 @@ static struct net_device_stats *rtl8152_get_stats(struct net_device *dev)
 
 static void read_bulk_callback(struct urb *urb)
 {
-	struct r8152 *tp;
-	unsigned pkt_len;
-	struct sk_buff *skb;
 	struct net_device *netdev;
-	struct net_device_stats *stats;
+	unsigned long flags;
 	int status = urb->status;
+	struct rx_agg *agg;
+	struct r8152 *tp;
 	int result;
-	struct rx_desc *rx_desc;
 
-	tp = urb->context;
+	agg = urb->context;
+	if (!agg)
+		return;
+
+	tp = agg->context;
 	if (!tp)
 		return;
+
 	if (test_bit(RTL8152_UNPLUG, &tp->flags))
 		return;
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
 	netdev = tp->netdev;
-	if (!netif_device_present(netdev))
+
+	/* When link down, the driver would cancel all bulks. */
+	/* This avoid the re-submitting bulk */
+	if (!netif_carrier_ok(netdev))
 		return;
 
-	stats = rtl8152_get_stats(netdev);
 	switch (status) {
 	case 0:
-		break;
+		if (urb->actual_length < ETH_ZLEN)
+			break;
+
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		list_add_tail(&agg->list, &tp->rx_done);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+		tasklet_schedule(&tp->tl);
+		return;
 	case -ESHUTDOWN:
 		set_bit(RTL8152_UNPLUG, &tp->flags);
 		netif_device_detach(tp->netdev);
+		return;
 	case -ENOENT:
 		return;	/* the urb is in unlink state */
 	case -ETIME:
 		pr_warn_ratelimited("may be reset is needed?..\n");
-		goto goon;
+		break;
 	default:
 		pr_warn_ratelimited("Rx status %d\n", status);
-		goto goon;
+		break;
 	}
 
-	/* protect against short packets (tell me why we got some?!?) */
-	if (urb->actual_length < sizeof(*rx_desc))
-		goto goon;
-
-
-	rx_desc = (struct rx_desc *)urb->transfer_buffer;
-	pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
-	if (urb->actual_length < sizeof(struct rx_desc) + pkt_len)
-		goto goon;
-
-	skb = netdev_alloc_skb_ip_align(netdev, pkt_len);
-	if (!skb)
-		goto goon;
-
-	memcpy(skb->data, tp->rx_skb->data + sizeof(struct rx_desc), pkt_len);
-	skb_put(skb, pkt_len);
-	skb->protocol = eth_type_trans(skb, netdev);
-	netif_rx(skb);
-	stats->rx_packets++;
-	stats->rx_bytes += pkt_len;
-goon:
-	usb_fill_bulk_urb(tp->rx_urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1),
-		      tp->rx_skb->data, RTL8152_RMS + sizeof(struct rx_desc),
-		      (usb_complete_t)read_bulk_callback, tp);
-	result = usb_submit_urb(tp->rx_urb, GFP_ATOMIC);
+	result = r8152_submit_rx(tp, agg, GFP_ATOMIC);
 	if (result == -ENODEV) {
 		netif_device_detach(tp->netdev);
 	} else if (result) {
-		set_bit(RX_URB_FAIL, &tp->flags);
-		goto resched;
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		list_add_tail(&agg->list, &tp->rx_done);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+		tasklet_schedule(&tp->tl);
+	}
+}
+
+static void write_bulk_callback(struct urb *urb)
+{
+	struct net_device_stats *stats;
+	unsigned long flags;
+	struct tx_agg *agg;
+	struct r8152 *tp;
+	int status = urb->status;
+
+	agg = urb->context;
+	if (!agg)
+		return;
+
+	tp = agg->context;
+	if (!tp)
+		return;
+
+	stats = rtl8152_get_stats(tp->netdev);
+	if (status) {
+		pr_warn_ratelimited("Tx status %d\n", status);
+		stats->tx_errors += agg->skb_num;
 	} else {
-		clear_bit(RX_URB_FAIL, &tp->flags);
+		stats->tx_packets += agg->skb_num;
+		stats->tx_bytes += agg->skb_len;
 	}
 
-	return;
-resched:
-	tasklet_schedule(&tp->tl);
+	spin_lock_irqsave(&tp->tx_lock, flags);
+	list_add_tail(&agg->list, &tp->tx_free);
+	spin_unlock_irqrestore(&tp->tx_lock, flags);
+
+	if (!netif_carrier_ok(tp->netdev))
+		return;
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return;
+
+	if (!skb_queue_empty(&tp->tx_queue))
+		tasklet_schedule(&tp->tl);
 }
 
-static void rx_fixup(unsigned long data)
+static void intr_callback(struct urb *urb)
 {
 	struct r8152 *tp;
-	int status;
+	__u16 *d;
+	int status = urb->status;
+	int res;
+
+	tp = urb->context;
+	if (!tp)
+		return;
 
-	tp = (struct r8152 *)data;
 	if (!test_bit(WORK_ENABLE, &tp->flags))
 		return;
 
-	status = usb_submit_urb(tp->rx_urb, GFP_ATOMIC);
-	if (status == -ENODEV) {
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
+		return;
+
+	switch (status) {
+	case 0:			/* success */
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ESHUTDOWN:
 		netif_device_detach(tp->netdev);
-	} else if (status) {
-		set_bit(RX_URB_FAIL, &tp->flags);
-		goto tlsched;
+	case -ENOENT:
+		return;
+	case -EOVERFLOW:
+		netif_info(tp, intr, tp->netdev, "intr status -EOVERFLOW\n");
+		goto resubmit;
+	/* -EPIPE:  should clear the halt */
+	default:
+		netif_info(tp, intr, tp->netdev, "intr status %d\n", status);
+		goto resubmit;
+	}
+
+	d = urb->transfer_buffer;
+	if (INTR_LINK & __le16_to_cpu(d[0])) {
+		if (!(tp->speed & LINK_STATUS)) {
+			set_bit(RTL8152_LINK_CHG, &tp->flags);
+			schedule_delayed_work(&tp->schedule, 0);
+		}
 	} else {
-		clear_bit(RX_URB_FAIL, &tp->flags);
+		if (tp->speed & LINK_STATUS) {
+			set_bit(RTL8152_LINK_CHG, &tp->flags);
+			schedule_delayed_work(&tp->schedule, 0);
+		}
 	}
 
-	return;
-tlsched:
-	tasklet_schedule(&tp->tl);
+resubmit:
+	res = usb_submit_urb(urb, GFP_ATOMIC);
+	if (res == -ENODEV)
+		netif_device_detach(tp->netdev);
+	else if (res)
+		netif_err(tp, intr, tp->netdev,
+			"can't resubmit intr, status %d\n", res);
 }
 
-static void write_bulk_callback(struct urb *urb)
+static inline void *rx_agg_align(void *data)
+{
+	return (void *)ALIGN((uintptr_t)data, 8);
+}
+
+static inline void *tx_agg_align(void *data)
+{
+	return (void *)ALIGN((uintptr_t)data, 4);
+}
+
+static void free_all_mem(struct r8152 *tp)
+{
+	int i;
+
+	for (i = 0; i < RTL8152_MAX_RX; i++) {
+		if (tp->rx_info[i].urb) {
+			usb_free_urb(tp->rx_info[i].urb);
+			tp->rx_info[i].urb = NULL;
+		}
+
+		if (tp->rx_info[i].buffer) {
+			kfree(tp->rx_info[i].buffer);
+			tp->rx_info[i].buffer = NULL;
+			tp->rx_info[i].head = NULL;
+		}
+	}
+
+	for (i = 0; i < RTL8152_MAX_TX; i++) {
+		if (tp->tx_info[i].urb) {
+			usb_free_urb(tp->tx_info[i].urb);
+			tp->tx_info[i].urb = NULL;
+		}
+
+		if (tp->tx_info[i].buffer) {
+			kfree(tp->tx_info[i].buffer);
+			tp->tx_info[i].buffer = NULL;
+			tp->tx_info[i].head = NULL;
+		}
+	}
+
+	if (tp->intr_urb) {
+		usb_free_urb(tp->intr_urb);
+		tp->intr_urb = NULL;
+	}
+
+	if (tp->intr_buff) {
+		kfree(tp->intr_buff);
+		tp->intr_buff = NULL;
+	}
+}
+
+static int alloc_all_mem(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+	struct usb_interface *intf = tp->intf;
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	struct usb_host_endpoint *ep_intr = alt->endpoint + 2;
+	struct urb *urb;
+	int node, i;
+	u8 *buf;
+
+	node = netdev->dev.parent ? dev_to_node(netdev->dev.parent) : -1;
+
+	spin_lock_init(&tp->rx_lock);
+	spin_lock_init(&tp->tx_lock);
+	INIT_LIST_HEAD(&tp->rx_done);
+	INIT_LIST_HEAD(&tp->tx_free);
+	skb_queue_head_init(&tp->tx_queue);
+
+	for (i = 0; i < RTL8152_MAX_RX; i++) {
+		buf = kmalloc_node(rx_buf_sz, GFP_KERNEL, node);
+		if (!buf)
+			goto err1;
+
+		if (buf != rx_agg_align(buf)) {
+			kfree(buf);
+			buf = kmalloc_node(rx_buf_sz + 8, GFP_KERNEL, node);
+			if (!buf)
+				goto err1;
+		}
+
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			kfree(buf);
+			goto err1;
+		}
+
+		INIT_LIST_HEAD(&tp->rx_info[i].list);
+		tp->rx_info[i].context = tp;
+		tp->rx_info[i].urb = urb;
+		tp->rx_info[i].buffer = buf;
+		tp->rx_info[i].head = rx_agg_align(buf);
+	}
+
+	for (i = 0; i < RTL8152_MAX_TX; i++) {
+		buf = kmalloc_node(rx_buf_sz, GFP_KERNEL, node);
+		if (!buf)
+			goto err1;
+
+		if (buf != tx_agg_align(buf)) {
+			kfree(buf);
+			buf = kmalloc_node(rx_buf_sz + 4, GFP_KERNEL, node);
+			if (!buf)
+				goto err1;
+		}
+
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			kfree(buf);
+			goto err1;
+		}
+
+		INIT_LIST_HEAD(&tp->tx_info[i].list);
+		tp->tx_info[i].context = tp;
+		tp->tx_info[i].urb = urb;
+		tp->tx_info[i].buffer = buf;
+		tp->tx_info[i].head = tx_agg_align(buf);
+
+		list_add_tail(&tp->tx_info[i].list, &tp->tx_free);
+	}
+
+	tp->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!tp->intr_urb)
+		goto err1;
+
+	tp->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
+	if (!tp->intr_buff)
+		goto err1;
+
+	tp->intr_interval = (int)ep_intr->desc.bInterval;
+	usb_fill_int_urb(tp->intr_urb, tp->udev, usb_rcvintpipe(tp->udev, 3),
+		     tp->intr_buff, INTBUFSIZE, intr_callback,
+		     tp, tp->intr_interval);
+
+	return 0;
+
+err1:
+	free_all_mem(tp);
+	return -ENOMEM;
+}
+
+static struct tx_agg *r8152_get_tx_agg(struct r8152 *tp)
+{
+	struct tx_agg *agg = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tp->tx_lock, flags);
+	if (!list_empty(&tp->tx_free)) {
+		struct list_head *cursor;
+
+		cursor = tp->tx_free.next;
+		list_del_init(cursor);
+		agg = list_entry(cursor, struct tx_agg, list);
+	}
+	spin_unlock_irqrestore(&tp->tx_lock, flags);
+
+	return agg;
+}
+
+static void
+r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc, struct sk_buff *skb)
+{
+	memset(desc, 0, sizeof(*desc));
+
+	desc->opts1 = cpu_to_le32((skb->len & TX_LEN_MASK) | TX_FS | TX_LS);
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		__be16 protocol;
+		u8 ip_protocol;
+		u32 opts2 = 0;
+
+		if (skb->protocol == htons(ETH_P_8021Q))
+			protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
+		else
+			protocol = skb->protocol;
+
+		switch (protocol) {
+		case htons(ETH_P_IP):
+			opts2 |= IPV4_CS;
+			ip_protocol = ip_hdr(skb)->protocol;
+			break;
+
+		case htons(ETH_P_IPV6):
+			opts2 |= IPV6_CS;
+			ip_protocol = ipv6_hdr(skb)->nexthdr;
+			break;
+
+		default:
+			ip_protocol = IPPROTO_RAW;
+			break;
+		}
+
+		if (ip_protocol == IPPROTO_TCP) {
+			opts2 |= TCP_CS;
+			opts2 |= (skb_transport_offset(skb) & 0x7fff) << 17;
+		} else if (ip_protocol == IPPROTO_UDP) {
+			opts2 |= UDP_CS;
+		} else {
+			WARN_ON_ONCE(1);
+		}
+
+		desc->opts2 = cpu_to_le32(opts2);
+	}
+}
+
+static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
+{
+	u32 remain;
+	u8 *tx_data;
+
+	tx_data = agg->head;
+	agg->skb_num = agg->skb_len = 0;
+	remain = rx_buf_sz - sizeof(struct tx_desc);
+
+	while (remain >= ETH_ZLEN) {
+		struct tx_desc *tx_desc;
+		struct sk_buff *skb;
+		unsigned int len;
+
+		skb = skb_dequeue(&tp->tx_queue);
+		if (!skb)
+			break;
+
+		len = skb->len;
+		if (remain < len) {
+			skb_queue_head(&tp->tx_queue, skb);
+			break;
+		}
+
+		tx_desc = (struct tx_desc *)tx_data;
+		tx_data += sizeof(*tx_desc);
+
+		r8152_tx_csum(tp, tx_desc, skb);
+		memcpy(tx_data, skb->data, len);
+		agg->skb_num++;
+		agg->skb_len += len;
+		dev_kfree_skb_any(skb);
+
+		tx_data = tx_agg_align(tx_data + len);
+		remain = rx_buf_sz - sizeof(*tx_desc) -
+			 (u32)((void *)tx_data - agg->head);
+	}
+
+	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
+			  agg->head, (int)(tx_data - (u8 *)agg->head),
+			  (usb_complete_t)write_bulk_callback, agg);
+
+	return usb_submit_urb(agg->urb, GFP_ATOMIC);
+}
+
+static void rx_bottom(struct r8152 *tp)
+{
+	unsigned long flags;
+	struct list_head *cursor, *next;
+
+	spin_lock_irqsave(&tp->rx_lock, flags);
+	list_for_each_safe(cursor, next, &tp->rx_done) {
+		struct rx_desc *rx_desc;
+		struct rx_agg *agg;
+		unsigned pkt_len;
+		int len_used = 0;
+		struct urb *urb;
+		u8 *rx_data;
+		int ret;
+
+		list_del_init(cursor);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+		agg = list_entry(cursor, struct rx_agg, list);
+		urb = agg->urb;
+		if (urb->actual_length < ETH_ZLEN)
+			goto submit;
+
+		rx_desc = agg->head;
+		rx_data = agg->head;
+		pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
+		len_used += sizeof(struct rx_desc) + pkt_len;
+
+		while (urb->actual_length >= len_used) {
+			struct net_device *netdev = tp->netdev;
+			struct net_device_stats *stats;
+			struct sk_buff *skb;
+
+			if (pkt_len < ETH_ZLEN)
+				break;
+
+			stats = rtl8152_get_stats(netdev);
+
+			pkt_len -= 4; /* CRC */
+			rx_data += sizeof(struct rx_desc);
+
+			skb = netdev_alloc_skb_ip_align(netdev, pkt_len);
+			if (!skb) {
+				stats->rx_dropped++;
+				break;
+			}
+			memcpy(skb->data, rx_data, pkt_len);
+			skb_put(skb, pkt_len);
+			skb->protocol = eth_type_trans(skb, netdev);
+			netif_rx(skb);
+			stats->rx_packets++;
+			stats->rx_bytes += pkt_len;
+
+			rx_data = rx_agg_align(rx_data + pkt_len + 4);
+			rx_desc = (struct rx_desc *)rx_data;
+			pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
+			len_used = (int)(rx_data - (u8 *)agg->head);
+			len_used += sizeof(struct rx_desc) + pkt_len;
+		}
+
+submit:
+		ret = r8152_submit_rx(tp, agg, GFP_ATOMIC);
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		if (ret && ret != -ENODEV) {
+			list_add_tail(&agg->list, next);
+			tasklet_schedule(&tp->tl);
+		}
+	}
+	spin_unlock_irqrestore(&tp->rx_lock, flags);
+}
+
+static void tx_bottom(struct r8152 *tp)
+{
+	int res;
+
+	do {
+		struct tx_agg *agg;
+
+		if (skb_queue_empty(&tp->tx_queue))
+			break;
+
+		agg = r8152_get_tx_agg(tp);
+		if (!agg)
+			break;
+
+		res = r8152_tx_agg_fill(tp, agg);
+		if (res) {
+			struct net_device_stats *stats;
+			struct net_device *netdev;
+			unsigned long flags;
+
+			netdev = tp->netdev;
+			stats = rtl8152_get_stats(netdev);
+
+			if (res == -ENODEV) {
+				netif_device_detach(netdev);
+			} else {
+				netif_warn(tp, tx_err, netdev,
+					   "failed tx_urb %d\n", res);
+				stats->tx_dropped += agg->skb_num;
+				spin_lock_irqsave(&tp->tx_lock, flags);
+				list_add_tail(&agg->list, &tp->tx_free);
+				spin_unlock_irqrestore(&tp->tx_lock, flags);
+			}
+		}
+	} while (res == 0);
+}
+
+static void bottom_half(unsigned long data)
 {
 	struct r8152 *tp;
-	int status = urb->status;
 
-	tp = urb->context;
-	if (!tp)
+	tp = (struct r8152 *)data;
+
+	if (test_bit(RTL8152_UNPLUG, &tp->flags))
 		return;
-	dev_kfree_skb_irq(tp->tx_skb);
-	if (!netif_device_present(tp->netdev))
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
 		return;
-	if (status)
-		dev_info(&urb->dev->dev, "%s: Tx status %d\n",
-			 tp->netdev->name, status);
-	tp->netdev->trans_start = jiffies;
-	netif_wake_queue(tp->netdev);
+
+	/* When link down, the driver would cancel all bulks. */
+	/* This avoid the re-submitting bulk */
+	if (!netif_carrier_ok(tp->netdev))
+		return;
+
+	rx_bottom(tp);
+	tx_bottom(tp);
+}
+
+static
+int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags)
+{
+	usb_fill_bulk_urb(agg->urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1),
+		      agg->head, rx_buf_sz,
+		      (usb_complete_t)read_bulk_callback, agg);
+
+	return usb_submit_urb(agg->urb, mem_flags);
 }
 
 static void rtl8152_tx_timeout(struct net_device *netdev)
 {
 	struct r8152 *tp = netdev_priv(netdev);
-	struct net_device_stats *stats = rtl8152_get_stats(netdev);
+	int i;
+
 	netif_warn(tp, tx_err, netdev, "Tx timeout.\n");
-	usb_unlink_urb(tp->tx_urb);
-	stats->tx_errors++;
+	for (i = 0; i < RTL8152_MAX_TX; i++)
+		usb_unlink_urb(tp->tx_info[i].urb);
 }
 
 static void rtl8152_set_rx_mode(struct net_device *netdev)
 {
 	struct r8152 *tp = netdev_priv(netdev);
 
-	if (tp->speed & LINK_STATUS)
+	if (tp->speed & LINK_STATUS) {
 		set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+		schedule_delayed_work(&tp->schedule, 0);
+	}
 }
 
 static void _rtl8152_set_rx_mode(struct net_device *netdev)
@@ -923,33 +1385,39 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
 {
 	struct r8152 *tp = netdev_priv(netdev);
 	struct net_device_stats *stats = rtl8152_get_stats(netdev);
+	unsigned long flags;
+	struct tx_agg *agg = NULL;
 	struct tx_desc *tx_desc;
 	unsigned int len;
+	u8 *tx_data;
 	int res;
 
-	netif_stop_queue(netdev);
-	len = skb->len;
-	if (skb_header_cloned(skb) || skb_headroom(skb) < sizeof(*tx_desc)) {
-		struct sk_buff *tx_skb;
+	skb_tx_timestamp(skb);
 
-		tx_skb = skb_copy_expand(skb, sizeof(*tx_desc), 0, GFP_ATOMIC);
-		dev_kfree_skb_any(skb);
-		if (!tx_skb) {
-			stats->tx_dropped++;
-			netif_wake_queue(netdev);
-			return NETDEV_TX_OK;
-		}
-		skb = tx_skb;
+	/* If tx_queue is not empty, it means at least one previous packt */
+	/* is waiting for sending. Don't send current one before it.      */
+	if (skb_queue_empty(&tp->tx_queue))
+		agg = r8152_get_tx_agg(tp);
+
+	if (!agg) {
+		skb_queue_tail(&tp->tx_queue, skb);
+		return NETDEV_TX_OK;
 	}
-	tx_desc = (struct tx_desc *)skb_push(skb, sizeof(*tx_desc));
-	memset(tx_desc, 0, sizeof(*tx_desc));
-	tx_desc->opts1 = cpu_to_le32((len & TX_LEN_MASK) | TX_FS | TX_LS);
-	tp->tx_skb = skb;
-	skb_tx_timestamp(skb);
-	usb_fill_bulk_urb(tp->tx_urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
-			  skb->data, skb->len,
-			  (usb_complete_t)write_bulk_callback, tp);
-	res = usb_submit_urb(tp->tx_urb, GFP_ATOMIC);
+
+	tx_desc = (struct tx_desc *)agg->head;
+	tx_data = agg->head + sizeof(*tx_desc);
+	agg->skb_num = agg->skb_len = 0;
+
+	len = skb->len;
+	r8152_tx_csum(tp, tx_desc, skb);
+	memcpy(tx_data, skb->data, len);
+	dev_kfree_skb_any(skb);
+	agg->skb_num++;
+	agg->skb_len += len;
+	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
+			  agg->head, len + sizeof(*tx_desc),
+			  (usb_complete_t)write_bulk_callback, agg);
+	res = usb_submit_urb(agg->urb, GFP_ATOMIC);
 	if (res) {
 		/* Can we get/handle EPIPE here? */
 		if (res == -ENODEV) {
@@ -957,12 +1425,11 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
 		} else {
 			netif_warn(tp, tx_err, netdev,
 				   "failed tx_urb %d\n", res);
-			stats->tx_errors++;
-			netif_start_queue(netdev);
+			stats->tx_dropped++;
+			spin_lock_irqsave(&tp->tx_lock, flags);
+			list_add_tail(&agg->list, &tp->tx_free);
+			spin_unlock_irqrestore(&tp->tx_lock, flags);
 		}
-	} else {
-		stats->tx_packets++;
-		stats->tx_bytes += skb->len;
 	}
 
 	return NETDEV_TX_OK;
@@ -999,17 +1466,18 @@ static inline u8 rtl8152_get_speed(struct r8152 *tp)
 
 static int rtl8152_enable(struct r8152 *tp)
 {
-	u32	ocp_data;
+	u32 ocp_data;
+	int i, ret;
 	u8 speed;
 
 	speed = rtl8152_get_speed(tp);
-	if (speed & _100bps) {
+	if (speed & _10bps) {
 		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
-		ocp_data &= ~EEEP_CR_EEEP_TX;
+		ocp_data |= EEEP_CR_EEEP_TX;
 		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
 	} else {
 		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
-		ocp_data |= EEEP_CR_EEEP_TX;
+		ocp_data &= ~EEEP_CR_EEEP_TX;
 		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
 	}
 
@@ -1023,23 +1491,34 @@ static int rtl8152_enable(struct r8152 *tp)
 	ocp_data &= ~RXDY_GATED_EN;
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
 
-	usb_fill_bulk_urb(tp->rx_urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1),
-		      tp->rx_skb->data, RTL8152_RMS + sizeof(struct rx_desc),
-		      (usb_complete_t)read_bulk_callback, tp);
+	INIT_LIST_HEAD(&tp->rx_done);
+	ret = 0;
+	for (i = 0; i < RTL8152_MAX_RX; i++) {
+		INIT_LIST_HEAD(&tp->rx_info[i].list);
+		ret |= r8152_submit_rx(tp, &tp->rx_info[i], GFP_KERNEL);
+	}
 
-	return usb_submit_urb(tp->rx_urb, GFP_KERNEL);
+	return ret;
 }
 
 static void rtl8152_disable(struct r8152 *tp)
 {
-	u32	ocp_data;
-	int	i;
+	struct net_device_stats *stats = rtl8152_get_stats(tp->netdev);
+	struct sk_buff *skb;
+	u32 ocp_data;
+	int i;
 
 	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
 	ocp_data &= ~RCR_ACPT_ALL;
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 
-	usb_kill_urb(tp->tx_urb);
+	while ((skb = skb_dequeue(&tp->tx_queue))) {
+		dev_kfree_skb(skb);
+		stats->tx_dropped++;
+	}
+
+	for (i = 0; i < RTL8152_MAX_TX; i++)
+		usb_kill_urb(tp->tx_info[i].urb);
 
 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
 	ocp_data |= RXDY_GATED_EN;
@@ -1058,7 +1537,8 @@ static void rtl8152_disable(struct r8152 *tp)
 		mdelay(1);
 	}
 
-	usb_kill_urb(tp->rx_urb);
+	for (i = 0; i < RTL8152_MAX_RX; i++)
+		usb_kill_urb(tp->rx_info[i].urb);
 
 	rtl8152_nic_reset(tp);
 }
@@ -1269,7 +1749,6 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
 	r8152_mdio_write(tp, MII_BMCR, bmcr);
 
 out:
-	schedule_delayed_work(&tp->schedule, 5 * HZ);
 
 	return ret;
 }
@@ -1292,6 +1771,7 @@ static void set_carrier(struct r8152 *tp)
 	struct net_device *netdev = tp->netdev;
 	u8 speed;
 
+	clear_bit(RTL8152_LINK_CHG, &tp->flags);
 	speed = rtl8152_get_speed(tp);
 
 	if (speed & LINK_STATUS) {
@@ -1303,7 +1783,9 @@ static void set_carrier(struct r8152 *tp)
 	} else {
 		if (tp->speed & LINK_STATUS) {
 			netif_carrier_off(netdev);
+			tasklet_disable(&tp->tl);
 			rtl8152_disable(tp);
+			tasklet_enable(&tp->tl);
 		}
 	}
 	tp->speed = speed;
@@ -1319,13 +1801,12 @@ static void rtl_work_func_t(struct work_struct *work)
 	if (test_bit(RTL8152_UNPLUG, &tp->flags))
 		goto out1;
 
-	set_carrier(tp);
+	if (test_bit(RTL8152_LINK_CHG, &tp->flags))
+		set_carrier(tp);
 
 	if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
 		_rtl8152_set_rx_mode(tp->netdev);
 
-	schedule_delayed_work(&tp->schedule, HZ);
-
 out1:
 	return;
 }
@@ -1335,28 +1816,20 @@ static int rtl8152_open(struct net_device *netdev)
 	struct r8152 *tp = netdev_priv(netdev);
 	int res = 0;
 
-	tp->speed = rtl8152_get_speed(tp);
-	if (tp->speed & LINK_STATUS) {
-		res = rtl8152_enable(tp);
-		if (res) {
-			if (res == -ENODEV)
-				netif_device_detach(tp->netdev);
-
-			netif_err(tp, ifup, netdev,
-				  "rtl8152_open failed: %d\n", res);
-			return res;
-		}
-
-		netif_carrier_on(netdev);
-	} else {
-		netif_stop_queue(netdev);
-		netif_carrier_off(netdev);
+	res = usb_submit_urb(tp->intr_urb, GFP_KERNEL);
+	if (res) {
+		if (res == -ENODEV)
+			netif_device_detach(tp->netdev);
+		netif_warn(tp, ifup, netdev,
+			"intr_urb submit failed: %d\n", res);
+		return res;
 	}
 
 	rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL);
+	tp->speed = 0;
+	netif_carrier_off(netdev);
 	netif_start_queue(netdev);
 	set_bit(WORK_ENABLE, &tp->flags);
-	schedule_delayed_work(&tp->schedule, 0);
 
 	return res;
 }
@@ -1366,10 +1839,13 @@ static int rtl8152_close(struct net_device *netdev)
 	struct r8152 *tp = netdev_priv(netdev);
 	int res = 0;
 
+	usb_kill_urb(tp->intr_urb);
 	clear_bit(WORK_ENABLE, &tp->flags);
 	cancel_delayed_work_sync(&tp->schedule);
 	netif_stop_queue(netdev);
+	tasklet_disable(&tp->tl);
 	rtl8152_disable(tp);
+	tasklet_enable(&tp->tl);
 
 	return res;
 }
@@ -1429,8 +1905,8 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp)
 
 static void r8152b_init(struct r8152 *tp)
 {
-	u32	ocp_data;
-	int	i;
+	u32 ocp_data;
+	int i;
 
 	rtl_clear_bp(tp);
 
@@ -1475,9 +1951,9 @@ static void r8152b_init(struct r8152 *tp)
 			break;
 	}
 
-	/* disable rx aggregation */
+	/* enable rx aggregation */
 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-	ocp_data |= RX_AGG_DISABLE;
+	ocp_data &= ~RX_AGG_DISABLE;
 	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
 }
 
@@ -1489,7 +1965,9 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
 
 	if (netif_running(tp->netdev)) {
 		clear_bit(WORK_ENABLE, &tp->flags);
+		usb_kill_urb(tp->intr_urb);
 		cancel_delayed_work_sync(&tp->schedule);
+		tasklet_disable(&tp->tl);
 	}
 
 	rtl8152_down(tp);
@@ -1504,10 +1982,12 @@ static int rtl8152_resume(struct usb_interface *intf)
 	r8152b_init(tp);
 	netif_device_attach(tp->netdev);
 	if (netif_running(tp->netdev)) {
-		rtl8152_enable(tp);
+		rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL);
+		tp->speed = 0;
+		netif_carrier_off(tp->netdev);
 		set_bit(WORK_ENABLE, &tp->flags);
-		set_bit(RTL8152_SET_RX_MODE, &tp->flags);
-		schedule_delayed_work(&tp->schedule, 0);
+		usb_submit_urb(tp->intr_urb, GFP_KERNEL);
+		tasklet_enable(&tp->tl);
 	}
 
 	return 0;
@@ -1619,6 +2099,7 @@ static int rtl8152_probe(struct usb_interface *intf,
 	struct usb_device *udev = interface_to_usbdev(intf);
 	struct r8152 *tp;
 	struct net_device *netdev;
+	int ret;
 
 	if (udev->actconfig->desc.bConfigurationValue != 1) {
 		usb_driver_set_configuration(udev, 1);
@@ -1631,19 +2112,22 @@ static int rtl8152_probe(struct usb_interface *intf,
 		return -ENOMEM;
 	}
 
+	SET_NETDEV_DEV(netdev, &intf->dev);
 	tp = netdev_priv(netdev);
 	tp->msg_enable = 0x7FFF;
 
-	tasklet_init(&tp->tl, rx_fixup, (unsigned long)tp);
+	tasklet_init(&tp->tl, bottom_half, (unsigned long)tp);
 	INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
 
 	tp->udev = udev;
 	tp->netdev = netdev;
+	tp->intf = intf;
 	netdev->netdev_ops = &rtl8152_netdev_ops;
 	netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
-	netdev->features &= ~NETIF_F_IP_CSUM;
+
+	netdev->features |= NETIF_F_IP_CSUM;
+	netdev->hw_features = NETIF_F_IP_CSUM;
 	SET_ETHTOOL_OPS(netdev, &ops);
-	tp->speed = 0;
 
 	tp->mii.dev = netdev;
 	tp->mii.mdio_read = read_mii_word;
@@ -1657,37 +2141,27 @@ static int rtl8152_probe(struct usb_interface *intf,
 	r8152b_init(tp);
 	set_ethernet_addr(tp);
 
-	if (!alloc_all_urbs(tp)) {
-		netif_err(tp, probe, netdev, "out of memory");
+	ret = alloc_all_mem(tp);
+	if (ret)
 		goto out;
-	}
-
-	tp->rx_skb = netdev_alloc_skb(netdev,
-			RTL8152_RMS + sizeof(struct rx_desc));
-	if (!tp->rx_skb)
-		goto out1;
 
 	usb_set_intfdata(intf, tp);
-	SET_NETDEV_DEV(netdev, &intf->dev);
-
 
-	if (register_netdev(netdev) != 0) {
+	ret = register_netdev(netdev);
+	if (ret != 0) {
 		netif_err(tp, probe, netdev, "couldn't register the device");
-		goto out2;
+		goto out1;
 	}
 
 	netif_info(tp, probe, netdev, "%s", DRIVER_VERSION);
 
 	return 0;
 
-out2:
-	usb_set_intfdata(intf, NULL);
-	dev_kfree_skb(tp->rx_skb);
 out1:
-	free_all_urbs(tp);
+	usb_set_intfdata(intf, NULL);
 out:
 	free_netdev(netdev);
-	return -EIO;
+	return ret;
 }
 
 static void rtl8152_unload(struct r8152 *tp)
@@ -1715,9 +2189,7 @@ static void rtl8152_disconnect(struct usb_interface *intf)
 		tasklet_kill(&tp->tl);
 		unregister_netdev(tp->netdev);
 		rtl8152_unload(tp);
-		free_all_urbs(tp);
-		if (tp->rx_skb)
-			dev_kfree_skb(tp->rx_skb);
+		free_all_mem(tp);
 		free_netdev(tp->netdev);
 	}
 }
@@ -1732,11 +2204,12 @@ MODULE_DEVICE_TABLE(usb, rtl8152_table);
 
 static struct usb_driver rtl8152_driver = {
 	.name =		MODULENAME,
+	.id_table =	rtl8152_table,
 	.probe =	rtl8152_probe,
 	.disconnect =	rtl8152_disconnect,
-	.id_table =	rtl8152_table,
 	.suspend =	rtl8152_suspend,
-	.resume =	rtl8152_resume
+	.resume =	rtl8152_resume,
+	.reset_resume =	rtl8152_resume,
 };
 
 module_usb_driver(rtl8152_driver);
diff --git a/drivers/net/usb/sr9700.c b/drivers/net/usb/sr9700.c
new file mode 100644
index 00000000000..7ec3e0ee078
--- /dev/null
+++ b/drivers/net/usb/sr9700.c
@@ -0,0 +1,560 @@
+/*
+ * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * Based on dm9601.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+
+#include "sr9700.h"
+
+static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	int err;
+
+	err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data,
+			      length);
+	if ((err != length) && (err >= 0))
+		err = -EINVAL;
+	return err;
+}
+
+static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	int err;
+
+	err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data,
+			       length);
+	if ((err >= 0) && (err < length))
+		err = -EINVAL;
+	return err;
+}
+
+static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value)
+{
+	return sr_read(dev, reg, 1, value);
+}
+
+static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value)
+{
+	return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG,
+				value, reg, NULL, 0);
+}
+
+static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
+			       0, reg, data, length);
+}
+
+static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
+{
+	usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
+			       value, reg, NULL, 0);
+}
+
+static int wait_phy_eeprom_ready(struct usbnet *dev, int phy)
+{
+	int i;
+
+	for (i = 0; i < SR_SHARE_TIMEOUT; i++) {
+		u8 tmp = 0;
+		int ret;
+
+		udelay(1);
+		ret = sr_read_reg(dev, EPCR, &tmp);
+		if (ret < 0)
+			return ret;
+
+		/* ready */
+		if (!(tmp & EPCR_ERRE))
+			return 0;
+	}
+
+	netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
+
+	return -EIO;
+}
+
+static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg,
+			      __le16 *value)
+{
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
+	sr_write_reg(dev, EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR);
+
+	ret = wait_phy_eeprom_ready(dev, phy);
+	if (ret < 0)
+		goto out_unlock;
+
+	sr_write_reg(dev, EPCR, 0x0);
+	ret = sr_read(dev, EPDR, 2, value);
+
+	netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
+		   phy, reg, *value, ret);
+
+out_unlock:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg,
+			       __le16 value)
+{
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	ret = sr_write(dev, EPDR, 2, &value);
+	if (ret < 0)
+		goto out_unlock;
+
+	sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
+	sr_write_reg(dev, EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) :
+		    (EPCR_WEP | EPCR_ERPRW));
+
+	ret = wait_phy_eeprom_ready(dev, phy);
+	if (ret < 0)
+		goto out_unlock;
+
+	sr_write_reg(dev, EPCR, 0x0);
+
+out_unlock:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
+{
+	return sr_share_read_word(dev, 0, offset, value);
+}
+
+static int sr9700_get_eeprom_len(struct net_device *netdev)
+{
+	return SR_EEPROM_LEN;
+}
+
+static int sr9700_get_eeprom(struct net_device *netdev,
+			     struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 *buf = (__le16 *)data;
+	int ret = 0;
+	int i;
+
+	/* access is 16bit */
+	if ((eeprom->offset & 0x01) || (eeprom->len & 0x01))
+		return -EINVAL;
+
+	for (i = 0; i < eeprom->len / 2; i++) {
+		ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+	int rc = 0;
+
+	if (phy_id) {
+		netdev_dbg(netdev, "Only internal phy supported\n");
+		return 0;
+	}
+
+	/* Access NSR_LINKST bit for link status instead of MII_BMSR */
+	if (loc == MII_BMSR) {
+		u8 value;
+
+		sr_read_reg(dev, NSR, &value);
+		if (value & NSR_LINKST)
+			rc = 1;
+	}
+	sr_share_read_word(dev, 1, loc, &res);
+	if (rc == 1)
+		res = le16_to_cpu(res) | BMSR_LSTATUS;
+	else
+		res = le16_to_cpu(res) & ~BMSR_LSTATUS;
+
+	netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+		   phy_id, loc, res);
+
+	return res;
+}
+
+static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc,
+			  int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+
+	if (phy_id) {
+		netdev_dbg(netdev, "Only internal phy supported\n");
+		return;
+	}
+
+	netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+		   phy_id, loc, val);
+
+	sr_share_write_word(dev, 1, loc, res);
+}
+
+static u32 sr9700_get_link(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u8 value = 0;
+	int rc = 0;
+
+	/* Get the Link Status directly */
+	sr_read_reg(dev, NSR, &value);
+	if (value & NSR_LINKST)
+		rc = 1;
+
+	return rc;
+}
+
+static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static const struct ethtool_ops sr9700_ethtool_ops = {
+	.get_drvinfo	= usbnet_get_drvinfo,
+	.get_link	= sr9700_get_link,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_eeprom_len	= sr9700_get_eeprom_len,
+	.get_eeprom	= sr9700_get_eeprom,
+	.get_settings	= usbnet_get_settings,
+	.set_settings	= usbnet_set_settings,
+	.nway_reset	= usbnet_nway_reset,
+};
+
+static void sr9700_set_multicast(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	/* We use the 20 byte dev->data for our 8 byte filter buffer
+	 * to avoid allocating memory that is tricky to free later
+	 */
+	u8 *hashes = (u8 *)&dev->data;
+	/* rx_ctl setting : enable, disable_long, disable_crc */
+	u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG;
+
+	memset(hashes, 0x00, SR_MCAST_SIZE);
+	/* broadcast address */
+	hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG;
+	if (netdev->flags & IFF_PROMISC) {
+		rx_ctl |= RCR_PRMSC;
+	} else if (netdev->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(netdev) > SR_MCAST_MAX) {
+		rx_ctl |= RCR_RUNT;
+	} else if (!netdev_mc_empty(netdev)) {
+		struct netdev_hw_addr *ha;
+
+		netdev_for_each_mc_addr(ha, netdev) {
+			u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			hashes[crc >> 3] |= 1 << (crc & 0x7);
+		}
+	}
+
+	sr_write_async(dev, MAR, SR_MCAST_SIZE, hashes);
+	sr_write_reg_async(dev, RCR, rx_ctl);
+}
+
+static int sr9700_set_mac_address(struct net_device *netdev, void *p)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data)) {
+		netdev_err(netdev, "not setting invalid mac address %pM\n",
+			   addr->sa_data);
+		return -EINVAL;
+	}
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	sr_write_async(dev, PAR, 6, netdev->dev_addr);
+
+	return 0;
+}
+
+static const struct net_device_ops sr9700_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= sr9700_ioctl,
+	.ndo_set_rx_mode	= sr9700_set_multicast,
+	.ndo_set_mac_address	= sr9700_set_mac_address,
+};
+
+static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct net_device *netdev;
+	struct mii_if_info *mii;
+	int ret;
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		goto out;
+
+	netdev = dev->net;
+
+	netdev->netdev_ops = &sr9700_netdev_ops;
+	netdev->ethtool_ops = &sr9700_ethtool_ops;
+	netdev->hard_header_len += SR_TX_OVERHEAD;
+	dev->hard_mtu = netdev->mtu + netdev->hard_header_len;
+	/* bulkin buffer is preferably not less than 3K */
+	dev->rx_urb_size = 3072;
+
+	mii = &dev->mii;
+	mii->dev = netdev;
+	mii->mdio_read = sr_mdio_read;
+	mii->mdio_write = sr_mdio_write;
+	mii->phy_id_mask = 0x1f;
+	mii->reg_num_mask = 0x1f;
+
+	sr_write_reg(dev, NCR, NCR_RST);
+	udelay(20);
+
+	/* read MAC
+	 * After Chip Power on, the Chip will reload the MAC from
+	 * EEPROM automatically to PAR. In case there is no EEPROM externally,
+	 * a default MAC address is stored in PAR for making chip work properly.
+	 */
+	if (sr_read(dev, PAR, ETH_ALEN, netdev->dev_addr) < 0) {
+		netdev_err(netdev, "Error reading MAC address\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* power up and reset phy */
+	sr_write_reg(dev, PRR, PRR_PHY_RST);
+	/* at least 10ms, here 20ms for safe */
+	mdelay(20);
+	sr_write_reg(dev, PRR, 0);
+	/* at least 1ms, here 2ms for reading right register */
+	udelay(2 * 1000);
+
+	/* receive broadcast packets */
+	sr9700_set_multicast(netdev);
+
+	sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET);
+	sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL |
+		      ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+	mii_nway_restart(mii);
+
+out:
+	return ret;
+}
+
+static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct sk_buff *sr_skb;
+	int len;
+
+	/* skb content (packets) format :
+	 *                    p0            p1            p2    ......    pm
+	 *                 /      \
+	 *            /                \
+	 *        /                            \
+	 *  /                                        \
+	 * p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn
+	 *
+	 * p0 : packet 0
+	 * p0b0 : packet 0 byte 0
+	 *
+	 * b0: rx status
+	 * b1: packet length (incl crc) low
+	 * b2: packet length (incl crc) high
+	 * b3..n-4: packet data
+	 * bn-3..bn: ethernet packet crc
+	 */
+	if (unlikely(skb->len < SR_RX_OVERHEAD)) {
+		netdev_err(dev->net, "unexpected tiny rx frame\n");
+		return 0;
+	}
+
+	/* one skb may contains multiple packets */
+	while (skb->len > SR_RX_OVERHEAD) {
+		if (skb->data[0] != 0x40)
+			return 0;
+
+		/* ignore the CRC length */
+		len = (skb->data[1] | (skb->data[2] << 8)) - 4;
+
+		if (len > ETH_FRAME_LEN)
+			return 0;
+
+		/* the last packet of current skb */
+		if (skb->len == (len + SR_RX_OVERHEAD))	{
+			skb_pull(skb, 3);
+			skb->len = len;
+			skb_set_tail_pointer(skb, len);
+			skb->truesize = len + sizeof(struct sk_buff);
+			return 2;
+		}
+
+		/* skb_clone is used for address align */
+		sr_skb = skb_clone(skb, GFP_ATOMIC);
+		if (!sr_skb)
+			return 0;
+
+		sr_skb->len = len;
+		sr_skb->data = skb->data + 3;
+		skb_set_tail_pointer(sr_skb, len);
+		sr_skb->truesize = len + sizeof(struct sk_buff);
+		usbnet_skb_return(dev, sr_skb);
+
+		skb_pull(skb, len + SR_RX_OVERHEAD);
+	};
+
+	return 0;
+}
+
+static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	int len;
+
+	/* SR9700 can only send out one ethernet packet at once.
+	 *
+	 * b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn
+	 *
+	 * b0: rx status
+	 * b1: packet length (incl crc) low
+	 * b2: packet length (incl crc) high
+	 * b3..n-4: packet data
+	 * bn-3..bn: ethernet packet crc
+	 */
+
+	len = skb->len;
+
+	if (skb_headroom(skb) < SR_TX_OVERHEAD) {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb, SR_TX_OVERHEAD, 0, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	__skb_push(skb, SR_TX_OVERHEAD);
+
+	/* usbnet adds padding if length is a multiple of packet size
+	 * if so, adjust length value in header
+	 */
+	if ((skb->len % dev->maxpacket) == 0)
+		len++;
+
+	skb->data[0] = len;
+	skb->data[1] = len >> 8;
+
+	return skb;
+}
+
+static void sr9700_status(struct usbnet *dev, struct urb *urb)
+{
+	int link;
+	u8 *buf;
+
+	/* format:
+	   b0: net status
+	   b1: tx status 1
+	   b2: tx status 2
+	   b3: rx status
+	   b4: rx overflow
+	   b5: rx count
+	   b6: tx count
+	   b7: gpr
+	*/
+
+	if (urb->actual_length < 8)
+		return;
+
+	buf = urb->transfer_buffer;
+
+	link = !!(buf[0] & 0x40);
+	if (netif_carrier_ok(dev->net) != link) {
+		usbnet_link_change(dev, link, 1);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+}
+
+static int sr9700_link_reset(struct usbnet *dev)
+{
+	struct ethtool_cmd ecmd;
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+
+	netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
+		   ecmd.speed, ecmd.duplex);
+
+	return 0;
+}
+
+static const struct driver_info sr9700_driver_info = {
+	.description	= "CoreChip SR9700 USB Ethernet",
+	.flags		= FLAG_ETHER,
+	.bind		= sr9700_bind,
+	.rx_fixup	= sr9700_rx_fixup,
+	.tx_fixup	= sr9700_tx_fixup,
+	.status		= sr9700_status,
+	.link_reset	= sr9700_link_reset,
+	.reset		= sr9700_link_reset,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		USB_DEVICE(0x0fe6, 0x9700),	/* SR9700 device */
+		.driver_info = (unsigned long)&sr9700_driver_info,
+	},
+	{},			/* END */
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver sr9700_usb_driver = {
+	.name		= "sr9700",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.disconnect	= usbnet_disconnect,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(sr9700_usb_driver);
+
+MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>");
+MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/sr9700.h b/drivers/net/usb/sr9700.h
new file mode 100644
index 00000000000..fd687c575e7
--- /dev/null
+++ b/drivers/net/usb/sr9700.h
@@ -0,0 +1,173 @@
+/*
+ * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _SR9700_H
+#define	_SR9700_H
+
+/* sr9700 spec. register table on Linux platform */
+
+/* Network Control Reg */
+#define	NCR			0x00
+#define		NCR_RST			(1 << 0)
+#define		NCR_LBK			(3 << 1)
+#define		NCR_FDX			(1 << 3)
+#define		NCR_WAKEEN		(1 << 6)
+/* Network Status Reg */
+#define	NSR			0x01
+#define		NSR_RXRDY		(1 << 0)
+#define		NSR_RXOV		(1 << 1)
+#define		NSR_TX1END		(1 << 2)
+#define		NSR_TX2END		(1 << 3)
+#define		NSR_TXFULL		(1 << 4)
+#define		NSR_WAKEST		(1 << 5)
+#define		NSR_LINKST		(1 << 6)
+#define		NSR_SPEED		(1 << 7)
+/* Tx Control Reg */
+#define	TCR			0x02
+#define		TCR_CRC_DIS		(1 << 1)
+#define		TCR_PAD_DIS		(1 << 2)
+#define		TCR_LC_CARE		(1 << 3)
+#define		TCR_CRS_CARE	(1 << 4)
+#define		TCR_EXCECM		(1 << 5)
+#define		TCR_LF_EN		(1 << 6)
+/* Tx Status Reg for Packet Index 1 */
+#define	TSR1		0x03
+#define		TSR1_EC			(1 << 2)
+#define		TSR1_COL		(1 << 3)
+#define		TSR1_LC			(1 << 4)
+#define		TSR1_NC			(1 << 5)
+#define		TSR1_LOC		(1 << 6)
+#define		TSR1_TLF		(1 << 7)
+/* Tx Status Reg for Packet Index 2 */
+#define	TSR2		0x04
+#define		TSR2_EC			(1 << 2)
+#define		TSR2_COL		(1 << 3)
+#define		TSR2_LC			(1 << 4)
+#define		TSR2_NC			(1 << 5)
+#define		TSR2_LOC		(1 << 6)
+#define		TSR2_TLF		(1 << 7)
+/* Rx Control Reg*/
+#define	RCR			0x05
+#define		RCR_RXEN		(1 << 0)
+#define		RCR_PRMSC		(1 << 1)
+#define		RCR_RUNT		(1 << 2)
+#define		RCR_ALL			(1 << 3)
+#define		RCR_DIS_CRC		(1 << 4)
+#define		RCR_DIS_LONG	(1 << 5)
+/* Rx Status Reg */
+#define	RSR			0x06
+#define		RSR_AE			(1 << 2)
+#define		RSR_MF			(1 << 6)
+#define		RSR_RF			(1 << 7)
+/* Rx Overflow Counter Reg */
+#define	ROCR		0x07
+#define		ROCR_ROC		(0x7F << 0)
+#define		ROCR_RXFU		(1 << 7)
+/* Back Pressure Threshold Reg */
+#define	BPTR		0x08
+#define		BPTR_JPT		(0x0F << 0)
+#define		BPTR_BPHW		(0x0F << 4)
+/* Flow Control Threshold Reg */
+#define	FCTR		0x09
+#define		FCTR_LWOT		(0x0F << 0)
+#define		FCTR_HWOT		(0x0F << 4)
+/* rx/tx Flow Control Reg */
+#define	FCR			0x0A
+#define		FCR_FLCE		(1 << 0)
+#define		FCR_BKPA		(1 << 4)
+#define		FCR_TXPEN		(1 << 5)
+#define		FCR_TXPF		(1 << 6)
+#define		FCR_TXP0		(1 << 7)
+/* Eeprom & Phy Control Reg */
+#define	EPCR		0x0B
+#define		EPCR_ERRE		(1 << 0)
+#define		EPCR_ERPRW		(1 << 1)
+#define		EPCR_ERPRR		(1 << 2)
+#define		EPCR_EPOS		(1 << 3)
+#define		EPCR_WEP		(1 << 4)
+/* Eeprom & Phy Address Reg */
+#define	EPAR		0x0C
+#define		EPAR_EROA		(0x3F << 0)
+#define		EPAR_PHY_ADR_MASK	(0x03 << 6)
+#define		EPAR_PHY_ADR		(0x01 << 6)
+/* Eeprom &	Phy Data Reg */
+#define	EPDR		0x0D	/* 0x0D ~ 0x0E for Data Reg Low & High */
+/* Wakeup Control Reg */
+#define	WCR			0x0F
+#define		WCR_MAGICST		(1 << 0)
+#define		WCR_LINKST		(1 << 2)
+#define		WCR_MAGICEN		(1 << 3)
+#define		WCR_LINKEN		(1 << 5)
+/* Physical Address Reg */
+#define	PAR			0x10	/* 0x10 ~ 0x15 6 bytes for PAR */
+/* Multicast Address Reg */
+#define	MAR			0x16	/* 0x16 ~ 0x1D 8 bytes for MAR */
+/* 0x1e unused */
+/* Phy Reset Reg */
+#define	PRR			0x1F
+#define		PRR_PHY_RST		(1 << 0)
+/* Tx sdram Write Pointer Address Low */
+#define	TWPAL		0x20
+/* Tx sdram Write Pointer Address High */
+#define	TWPAH		0x21
+/* Tx sdram Read Pointer Address Low */
+#define	TRPAL		0x22
+/* Tx sdram Read Pointer Address High */
+#define	TRPAH		0x23
+/* Rx sdram Write Pointer Address Low */
+#define	RWPAL		0x24
+/* Rx sdram Write Pointer Address High */
+#define	RWPAH		0x25
+/* Rx sdram Read Pointer Address Low */
+#define	RRPAL		0x26
+/* Rx sdram Read Pointer Address High */
+#define	RRPAH		0x27
+/* Vendor ID register */
+#define	VID			0x28	/* 0x28 ~ 0x29 2 bytes for VID */
+/* Product ID register */
+#define	PID			0x2A	/* 0x2A ~ 0x2B 2 bytes for PID */
+/* CHIP Revision register */
+#define	CHIPR		0x2C
+/* 0x2D --> 0xEF unused */
+/* USB Device Address */
+#define	USBDA		0xF0
+#define		USBDA_USBFA		(0x7F << 0)
+/* RX packet Counter Reg */
+#define	RXC			0xF1
+/* Tx packet Counter & USB Status Reg */
+#define	TXC_USBS	0xF2
+#define		TXC_USBS_TXC0		(1 << 0)
+#define		TXC_USBS_TXC1		(1 << 1)
+#define		TXC_USBS_TXC2		(1 << 2)
+#define		TXC_USBS_EP1RDY		(1 << 5)
+#define		TXC_USBS_SUSFLAG	(1 << 6)
+#define		TXC_USBS_RXFAULT	(1 << 7)
+/* USB Control register */
+#define	USBC		0xF4
+#define		USBC_EP3NAK		(1 << 4)
+#define		USBC_EP3ACK		(1 << 5)
+
+/* Register access commands and flags */
+#define	SR_RD_REGS		0x00
+#define	SR_WR_REGS		0x01
+#define	SR_WR_REG		0x03
+#define	SR_REQ_RD_REG	(USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+#define	SR_REQ_WR_REG	(USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+
+/* parameters */
+#define	SR_SHARE_TIMEOUT	1000
+#define	SR_EEPROM_LEN		256
+#define	SR_MCAST_SIZE		8
+#define	SR_MCAST_ADDR_FLAG	0x80
+#define	SR_MCAST_MAX		64
+#define	SR_TX_OVERHEAD		2	/* 2bytes header */
+#define	SR_RX_OVERHEAD		7	/* 3bytes header + 4crc tail */
+
+#endif	/* _SR9700_H */
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 27a00b00603..7b331e613e0 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -59,15 +59,13 @@
  * For high speed, each frame comfortably fits almost 36 max size
  * Ethernet packets (so queues should be bigger).
  *
- * REVISIT qlens should be members of 'struct usbnet'; the goal is to
- * let the USB host controller be busy for 5msec or more before an irq
- * is required, under load.  Jumbograms change the equation.
+ * The goal is to let the USB host controller be busy for 5msec or
+ * more before an irq is required, under load.  Jumbograms change
+ * the equation.
  */
-#define RX_MAX_QUEUE_MEMORY (60 * 1518)
-#define	RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
-			(RX_MAX_QUEUE_MEMORY/(dev)->rx_urb_size) : 4)
-#define	TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
-			(RX_MAX_QUEUE_MEMORY/(dev)->hard_mtu) : 4)
+#define	MAX_QUEUE_MEMORY	(60 * 1518)
+#define	RX_QLEN(dev)		((dev)->rx_qlen)
+#define	TX_QLEN(dev)		((dev)->tx_qlen)
 
 // reawaken network queue this soon after stopping; else watchdog barks
 #define TX_TIMEOUT_JIFFIES	(5*HZ)
@@ -347,6 +345,31 @@ void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
 }
 EXPORT_SYMBOL_GPL(usbnet_skb_return);
 
+/* must be called if hard_mtu or rx_urb_size changed */
+void usbnet_update_max_qlen(struct usbnet *dev)
+{
+	enum usb_device_speed speed = dev->udev->speed;
+
+	switch (speed) {
+	case USB_SPEED_HIGH:
+		dev->rx_qlen = MAX_QUEUE_MEMORY / dev->rx_urb_size;
+		dev->tx_qlen = MAX_QUEUE_MEMORY / dev->hard_mtu;
+		break;
+	case USB_SPEED_SUPER:
+		/*
+		 * Not take default 5ms qlen for super speed HC to
+		 * save memory, and iperf tests show 2.5ms qlen can
+		 * work well
+		 */
+		dev->rx_qlen = 5 * MAX_QUEUE_MEMORY / dev->rx_urb_size;
+		dev->tx_qlen = 5 * MAX_QUEUE_MEMORY / dev->hard_mtu;
+		break;
+	default:
+		dev->rx_qlen = dev->tx_qlen = 4;
+	}
+}
+EXPORT_SYMBOL_GPL(usbnet_update_max_qlen);
+
 
 /*-------------------------------------------------------------------------
  *
@@ -375,6 +398,9 @@ int usbnet_change_mtu (struct net_device *net, int new_mtu)
 			usbnet_unlink_rx_urbs(dev);
 	}
 
+	/* max qlen depend on hard_mtu and rx_urb_size */
+	usbnet_update_max_qlen(dev);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(usbnet_change_mtu);
@@ -843,6 +869,9 @@ int usbnet_open (struct net_device *net)
 		goto done;
 	}
 
+	/* hard_mtu or rx_urb_size may change in reset() */
+	usbnet_update_max_qlen(dev);
+
 	// insist peer be connected
 	if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
 		netif_dbg(dev, ifup, dev->net, "can't open; %d\n", retval);
@@ -927,6 +956,9 @@ int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd)
 	if (dev->driver_info->link_reset)
 		dev->driver_info->link_reset(dev);
 
+	/* hard_mtu or rx_urb_size may change in link_reset() */
+	usbnet_update_max_qlen(dev);
+
 	return retval;
 
 }
@@ -1020,6 +1052,9 @@ static void __handle_link_change(struct usbnet *dev)
 		tasklet_schedule(&dev->bh);
 	}
 
+	/* hard_mtu or rx_urb_size may change during link change */
+	usbnet_update_max_qlen(dev);
+
 	clear_bit(EVENT_LINK_CHANGE, &dev->flags);
 }
 
@@ -1632,11 +1667,18 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 		dev->rx_urb_size = dev->hard_mtu;
 	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
 
+	/* let userspace know we have a random address */
+	if (ether_addr_equal(net->dev_addr, node_id))
+		net->addr_assign_type = NET_ADDR_RANDOM;
+
 	if ((dev->driver_info->flags & FLAG_WLAN) != 0)
 		SET_NETDEV_DEVTYPE(net, &wlan_type);
 	if ((dev->driver_info->flags & FLAG_WWAN) != 0)
 		SET_NETDEV_DEVTYPE(net, &wwan_type);
 
+	/* initialize max rx_qlen and tx_qlen */
+	usbnet_update_max_qlen(dev);
+
 	status = register_netdev (net);
 	if (status)
 		goto out4;