Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 2035 insertions, 0 deletions

diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
new file mode 100644
index 00000000000..7b57d552094
--- /dev/null
+++ b/drivers/net/via-rhine.c
@@ -0,0 +1,2035 @@
+/* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */
+/*
+	Written 1998-2001 by Donald Becker.
+
+	Current Maintainer: Roger Luethi <rl@hellgate.ch>
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License (GPL), incorporated herein by reference.
+	Drivers based on or derived from this code fall under the GPL and must
+	retain the authorship, copyright and license notice.  This file is not
+	a complete program and may only be used when the entire operating
+	system is licensed under the GPL.
+
+	This driver is designed for the VIA VT86C100A Rhine-I.
+	It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM
+	and management NIC 6105M).
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+
+	This driver contains some changes from the original Donald Becker
+	version. He may or may not be interested in bug reports on this
+	code. You can find his versions at:
+	http://www.scyld.com/network/via-rhine.html
+
+
+	Linux kernel version history:
+
+	LK1.1.0:
+	- Jeff Garzik: softnet 'n stuff
+
+	LK1.1.1:
+	- Justin Guyett: softnet and locking fixes
+	- Jeff Garzik: use PCI interface
+
+	LK1.1.2:
+	- Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions
+
+	LK1.1.3:
+	- Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c
+			 code) update "Theory of Operation" with
+			 softnet/locking changes
+	- Dave Miller: PCI DMA and endian fixups
+	- Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation
+
+	LK1.1.4:
+	- Urban Widmark: fix gcc 2.95.2 problem and
+	                 remove writel's to fixed address 0x7c
+
+	LK1.1.5:
+	- Urban Widmark: mdio locking, bounce buffer changes
+	                 merges from Beckers 1.05 version
+	                 added netif_running_on/off support
+
+	LK1.1.6:
+	- Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio)
+	                 set netif_running_on/off on startup, del_timer_sync
+
+	LK1.1.7:
+	- Manfred Spraul: added reset into tx_timeout
+
+	LK1.1.9:
+	- Urban Widmark: merges from Beckers 1.10 version
+	                 (media selection + eeprom reload)
+	- David Vrabel:  merges from D-Link "1.11" version
+	                 (disable WOL and PME on startup)
+
+	LK1.1.10:
+	- Manfred Spraul: use "singlecopy" for unaligned buffers
+	                  don't allocate bounce buffers for !ReqTxAlign cards
+
+	LK1.1.11:
+	- David Woodhouse: Set dev->base_addr before the first time we call
+			   wait_for_reset(). It's a lot happier that way.
+			   Free np->tx_bufs only if we actually allocated it.
+
+	LK1.1.12:
+	- Martin Eriksson: Allow Memory-Mapped IO to be enabled.
+
+	LK1.1.13 (jgarzik):
+	- Add ethtool support
+	- Replace some MII-related magic numbers with constants
+
+	LK1.1.14 (Ivan G.):
+	- fixes comments for Rhine-III
+	- removes W_MAX_TIMEOUT (unused)
+	- adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card
+	  is R-I and has Davicom chip, flag is referenced in kernel driver)
+	- sends chip_id as a parameter to wait_for_reset since np is not
+	  initialized on first call
+	- changes mmio "else if (chip_id==VT6102)" to "else" so it will work
+	  for Rhine-III's (documentation says same bit is correct)
+	- transmit frame queue message is off by one - fixed
+	- adds IntrNormalSummary to "Something Wicked" exclusion list
+	  so normal interrupts will not trigger the message (src: Donald Becker)
+	(Roger Luethi)
+	- show confused chip where to continue after Tx error
+	- location of collision counter is chip specific
+	- allow selecting backoff algorithm (module parameter)
+
+	LK1.1.15 (jgarzik):
+	- Use new MII lib helper generic_mii_ioctl
+
+	LK1.1.16 (Roger Luethi)
+	- Etherleak fix
+	- Handle Tx buffer underrun
+	- Fix bugs in full duplex handling
+	- New reset code uses "force reset" cmd on Rhine-II
+	- Various clean ups
+
+	LK1.1.17 (Roger Luethi)
+	- Fix race in via_rhine_start_tx()
+	- On errors, wait for Tx engine to turn off before scavenging
+	- Handle Tx descriptor write-back race on Rhine-II
+	- Force flushing for PCI posted writes
+	- More reset code changes
+
+	LK1.1.18 (Roger Luethi)
+	- No filtering multicast in promisc mode (Edward Peng)
+	- Fix for Rhine-I Tx timeouts
+
+	LK1.1.19 (Roger Luethi)
+	- Increase Tx threshold for unspecified errors
+
+	LK1.2.0-2.6 (Roger Luethi)
+	- Massive clean-up
+	- Rewrite PHY, media handling (remove options, full_duplex, backoff)
+	- Fix Tx engine race for good
+
+*/
+
+#define DRV_NAME	"via-rhine"
+#define DRV_VERSION	"1.2.0-2.6"
+#define DRV_RELDATE	"June-10-2004"
+
+
+/* A few user-configurable values.
+   These may be modified when a driver module is loaded. */
+
+static int debug = 1;	/* 1 normal messages, 0 quiet .. 7 verbose. */
+static int max_interrupt_work = 20;
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1518 effectively disables this feature. */
+static int rx_copybreak;
+
+/*
+ * In case you are looking for 'options[]' or 'full_duplex[]', they
+ * are gone. Use ethtool(8) instead.
+ */
+
+/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
+   The Rhine has a 64 element 8390-like hash table. */
+static const int multicast_filter_limit = 32;
+
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+   The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+   Making the Tx ring too large decreases the effectiveness of channel
+   bonding and packet priority.
+   There are no ill effects from too-large receive rings. */
+#define TX_RING_SIZE	16
+#define TX_QUEUE_LEN	10	/* Limit ring entries actually used. */
+#define RX_RING_SIZE	16
+
+
+/* Operational parameters that usually are not changed. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT	(2*HZ)
+
+#define PKT_BUF_SZ	1536	/* Size of each temporary Rx buffer.*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>	/* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* These identify the driver base version and may not be removed. */
+static char version[] __devinitdata =
+KERN_INFO DRV_NAME ".c:v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n";
+
+/* This driver was written to use PCI memory space. Some early versions
+   of the Rhine may only work correctly with I/O space accesses. */
+#ifdef CONFIG_VIA_RHINE_MMIO
+#define USE_MMIO
+#else
+#endif
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_param(max_interrupt_work, int, 0);
+module_param(debug, int, 0);
+module_param(rx_copybreak, int, 0);
+MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
+MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
+MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
+
+/*
+		Theory of Operation
+
+I. Board Compatibility
+
+This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet
+controller.
+
+II. Board-specific settings
+
+Boards with this chip are functional only in a bus-master PCI slot.
+
+Many operational settings are loaded from the EEPROM to the Config word at
+offset 0x78. For most of these settings, this driver assumes that they are
+correct.
+If this driver is compiled to use PCI memory space operations the EEPROM
+must be configured to enable memory ops.
+
+III. Driver operation
+
+IIIa. Ring buffers
+
+This driver uses two statically allocated fixed-size descriptor lists
+formed into rings by a branch from the final descriptor to the beginning of
+the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
+
+IIIb/c. Transmit/Receive Structure
+
+This driver attempts to use a zero-copy receive and transmit scheme.
+
+Alas, all data buffers are required to start on a 32 bit boundary, so
+the driver must often copy transmit packets into bounce buffers.
+
+The driver allocates full frame size skbuffs for the Rx ring buffers at
+open() time and passes the skb->data field to the chip as receive data
+buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
+a fresh skbuff is allocated and the frame is copied to the new skbuff.
+When the incoming frame is larger, the skbuff is passed directly up the
+protocol stack. Buffers consumed this way are replaced by newly allocated
+skbuffs in the last phase of rhine_rx().
+
+The RX_COPYBREAK value is chosen to trade-off the memory wasted by
+using a full-sized skbuff for small frames vs. the copying costs of larger
+frames. New boards are typically used in generously configured machines
+and the underfilled buffers have negligible impact compared to the benefit of
+a single allocation size, so the default value of zero results in never
+copying packets. When copying is done, the cost is usually mitigated by using
+a combined copy/checksum routine. Copying also preloads the cache, which is
+most useful with small frames.
+
+Since the VIA chips are only able to transfer data to buffers on 32 bit
+boundaries, the IP header at offset 14 in an ethernet frame isn't
+longword aligned for further processing. Copying these unaligned buffers
+has the beneficial effect of 16-byte aligning the IP header.
+
+IIId. Synchronization
+
+The driver runs as two independent, single-threaded flows of control. One
+is the send-packet routine, which enforces single-threaded use by the
+dev->priv->lock spinlock. The other thread is the interrupt handler, which
+is single threaded by the hardware and interrupt handling software.
+
+The send packet thread has partial control over the Tx ring. It locks the
+dev->priv->lock whenever it's queuing a Tx packet. If the next slot in the ring
+is not available it stops the transmit queue by calling netif_stop_queue.
+
+The interrupt handler has exclusive control over the Rx ring and records stats
+from the Tx ring. After reaping the stats, it marks the Tx queue entry as
+empty by incrementing the dirty_tx mark. If at least half of the entries in
+the Rx ring are available the transmit queue is woken up if it was stopped.
+
+IV. Notes
+
+IVb. References
+
+Preliminary VT86C100A manual from http://www.via.com.tw/
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
+ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf
+ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF
+
+
+IVc. Errata
+
+The VT86C100A manual is not reliable information.
+The 3043 chip does not handle unaligned transmit or receive buffers, resulting
+in significant performance degradation for bounce buffer copies on transmit
+and unaligned IP headers on receive.
+The chip does not pad to minimum transmit length.
+
+*/
+
+
+/* This table drives the PCI probe routines. It's mostly boilerplate in all
+   of the drivers, and will likely be provided by some future kernel.
+   Note the matching code -- the first table entry matchs all 56** cards but
+   second only the 1234 card.
+*/
+
+enum rhine_revs {
+	VT86C100A	= 0x00,
+	VTunknown0	= 0x20,
+	VT6102		= 0x40,
+	VT8231		= 0x50,	/* Integrated MAC */
+	VT8233		= 0x60,	/* Integrated MAC */
+	VT8235		= 0x74,	/* Integrated MAC */
+	VT8237		= 0x78,	/* Integrated MAC */
+	VTunknown1	= 0x7C,
+	VT6105		= 0x80,
+	VT6105_B0	= 0x83,
+	VT6105L		= 0x8A,
+	VT6107		= 0x8C,
+	VTunknown2	= 0x8E,
+	VT6105M		= 0x90,	/* Management adapter */
+};
+
+enum rhine_quirks {
+	rqWOL		= 0x0001,	/* Wake-On-LAN support */
+	rqForceReset	= 0x0002,
+	rq6patterns	= 0x0040,	/* 6 instead of 4 patterns for WOL */
+	rqStatusWBRace	= 0x0080,	/* Tx Status Writeback Error possible */
+	rqRhineI	= 0x0100,	/* See comment below */
+};
+/*
+ * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable
+ * MMIO as well as for the collision counter and the Tx FIFO underflow
+ * indicator. In addition, Tx and Rx buffers need to 4 byte aligned.
+ */
+
+/* Beware of PCI posted writes */
+#define IOSYNC	do { ioread8(ioaddr + StationAddr); } while (0)
+
+static struct pci_device_id rhine_pci_tbl[] =
+{
+	{0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT86C100A */
+	{0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6102 */
+	{0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* 6105{,L,LOM} */
+	{0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6105M */
+	{ }	/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, rhine_pci_tbl);
+
+
+/* Offsets to the device registers. */
+enum register_offsets {
+	StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08,
+	ChipCmd1=0x09,
+	IntrStatus=0x0C, IntrEnable=0x0E,
+	MulticastFilter0=0x10, MulticastFilter1=0x14,
+	RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54,
+	MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E,
+	MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74,
+	ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B,
+	RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81,
+	StickyHW=0x83, IntrStatus2=0x84,
+	WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4,
+	WOLcrClr1=0xA6, WOLcgClr=0xA7,
+	PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD,
+};
+
+/* Bits in ConfigD */
+enum backoff_bits {
+	BackOptional=0x01, BackModify=0x02,
+	BackCaptureEffect=0x04, BackRandom=0x08
+};
+
+#ifdef USE_MMIO
+/* Registers we check that mmio and reg are the same. */
+static const int mmio_verify_registers[] = {
+	RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD,
+	0
+};
+#endif
+
+/* Bits in the interrupt status/mask registers. */
+enum intr_status_bits {
+	IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020,
+	IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210,
+	IntrPCIErr=0x0040,
+	IntrStatsMax=0x0080, IntrRxEarly=0x0100,
+	IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000,
+	IntrTxAborted=0x2000, IntrLinkChange=0x4000,
+	IntrRxWakeUp=0x8000,
+	IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260,
+	IntrTxDescRace=0x080000,	/* mapped from IntrStatus2 */
+	IntrTxErrSummary=0x082218,
+};
+
+/* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */
+enum wol_bits {
+	WOLucast	= 0x10,
+	WOLmagic	= 0x20,
+	WOLbmcast	= 0x30,
+	WOLlnkon	= 0x40,
+	WOLlnkoff	= 0x80,
+};
+
+/* The Rx and Tx buffer descriptors. */
+struct rx_desc {
+	s32 rx_status;
+	u32 desc_length; /* Chain flag, Buffer/frame length */
+	u32 addr;
+	u32 next_desc;
+};
+struct tx_desc {
+	s32 tx_status;
+	u32 desc_length; /* Chain flag, Tx Config, Frame length */
+	u32 addr;
+	u32 next_desc;
+};
+
+/* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */
+#define TXDESC		0x00e08000
+
+enum rx_status_bits {
+	RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F
+};
+
+/* Bits in *_desc.*_status */
+enum desc_status_bits {
+	DescOwn=0x80000000
+};
+
+/* Bits in ChipCmd. */
+enum chip_cmd_bits {
+	CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08,
+	CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40,
+	Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04,
+	Cmd1NoTxPoll=0x08, Cmd1Reset=0x80,
+};
+
+struct rhine_private {
+	/* Descriptor rings */
+	struct rx_desc *rx_ring;
+	struct tx_desc *tx_ring;
+	dma_addr_t rx_ring_dma;
+	dma_addr_t tx_ring_dma;
+
+	/* The addresses of receive-in-place skbuffs. */
+	struct sk_buff *rx_skbuff[RX_RING_SIZE];
+	dma_addr_t rx_skbuff_dma[RX_RING_SIZE];
+
+	/* The saved address of a sent-in-place packet/buffer, for later free(). */
+	struct sk_buff *tx_skbuff[TX_RING_SIZE];
+	dma_addr_t tx_skbuff_dma[TX_RING_SIZE];
+
+	/* Tx bounce buffers */
+	unsigned char *tx_buf[TX_RING_SIZE];
+	unsigned char *tx_bufs;
+	dma_addr_t tx_bufs_dma;
+
+	struct pci_dev *pdev;
+	long pioaddr;
+	struct net_device_stats stats;
+	spinlock_t lock;
+
+	/* Frequently used values: keep some adjacent for cache effect. */
+	u32 quirks;
+	struct rx_desc *rx_head_desc;
+	unsigned int cur_rx, dirty_rx;	/* Producer/consumer ring indices */
+	unsigned int cur_tx, dirty_tx;
+	unsigned int rx_buf_sz;		/* Based on MTU+slack. */
+	u8 wolopts;
+
+	u8 tx_thresh, rx_thresh;
+
+	struct mii_if_info mii_if;
+	void __iomem *base;
+};
+
+static int  mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static int  rhine_open(struct net_device *dev);
+static void rhine_tx_timeout(struct net_device *dev);
+static int  rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static void rhine_tx(struct net_device *dev);
+static void rhine_rx(struct net_device *dev);
+static void rhine_error(struct net_device *dev, int intr_status);
+static void rhine_set_rx_mode(struct net_device *dev);
+static struct net_device_stats *rhine_get_stats(struct net_device *dev);
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static struct ethtool_ops netdev_ethtool_ops;
+static int  rhine_close(struct net_device *dev);
+static void rhine_shutdown (struct device *gdev);
+
+#define RHINE_WAIT_FOR(condition) do {					\
+	int i=1024;							\
+	while (!(condition) && --i)					\
+		;							\
+	if (debug > 1 && i < 512)					\
+		printk(KERN_INFO "%s: %4d cycles used @ %s:%d\n",	\
+				DRV_NAME, 1024-i, __func__, __LINE__);	\
+} while(0)
+
+static inline u32 get_intr_status(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	u32 intr_status;
+
+	intr_status = ioread16(ioaddr + IntrStatus);
+	/* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
+	if (rp->quirks & rqStatusWBRace)
+		intr_status |= ioread8(ioaddr + IntrStatus2) << 16;
+	return intr_status;
+}
+
+/*
+ * Get power related registers into sane state.
+ * Notify user about past WOL event.
+ */
+static void rhine_power_init(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	u16 wolstat;
+
+	if (rp->quirks & rqWOL) {
+		/* Make sure chip is in power state D0 */
+		iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW);
+
+		/* Disable "force PME-enable" */
+		iowrite8(0x80, ioaddr + WOLcgClr);
+
+		/* Clear power-event config bits (WOL) */
+		iowrite8(0xFF, ioaddr + WOLcrClr);
+		/* More recent cards can manage two additional patterns */
+		if (rp->quirks & rq6patterns)
+			iowrite8(0x03, ioaddr + WOLcrClr1);
+
+		/* Save power-event status bits */
+		wolstat = ioread8(ioaddr + PwrcsrSet);
+		if (rp->quirks & rq6patterns)
+			wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8;
+
+		/* Clear power-event status bits */
+		iowrite8(0xFF, ioaddr + PwrcsrClr);
+		if (rp->quirks & rq6patterns)
+			iowrite8(0x03, ioaddr + PwrcsrClr1);
+
+		if (wolstat) {
+			char *reason;
+			switch (wolstat) {
+			case WOLmagic:
+				reason = "Magic packet";
+				break;
+			case WOLlnkon:
+				reason = "Link went up";
+				break;
+			case WOLlnkoff:
+				reason = "Link went down";
+				break;
+			case WOLucast:
+				reason = "Unicast packet";
+				break;
+			case WOLbmcast:
+				reason = "Multicast/broadcast packet";
+				break;
+			default:
+				reason = "Unknown";
+			}
+			printk(KERN_INFO "%s: Woke system up. Reason: %s.\n",
+			       DRV_NAME, reason);
+		}
+	}
+}
+
+static void rhine_chip_reset(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	iowrite8(Cmd1Reset, ioaddr + ChipCmd1);
+	IOSYNC;
+
+	if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) {
+		printk(KERN_INFO "%s: Reset not complete yet. "
+			"Trying harder.\n", DRV_NAME);
+
+		/* Force reset */
+		if (rp->quirks & rqForceReset)
+			iowrite8(0x40, ioaddr + MiscCmd);
+
+		/* Reset can take somewhat longer (rare) */
+		RHINE_WAIT_FOR(!(ioread8(ioaddr + ChipCmd1) & Cmd1Reset));
+	}
+
+	if (debug > 1)
+		printk(KERN_INFO "%s: Reset %s.\n", dev->name,
+			(ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ?
+			"failed" : "succeeded");
+}
+
+#ifdef USE_MMIO
+static void enable_mmio(long pioaddr, u32 quirks)
+{
+	int n;
+	if (quirks & rqRhineI) {
+		/* More recent docs say that this bit is reserved ... */
+		n = inb(pioaddr + ConfigA) | 0x20;
+		outb(n, pioaddr + ConfigA);
+	} else {
+		n = inb(pioaddr + ConfigD) | 0x80;
+		outb(n, pioaddr + ConfigD);
+	}
+}
+#endif
+
+/*
+ * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM
+ * (plus 0x6C for Rhine-I/II)
+ */
+static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	outb(0x20, pioaddr + MACRegEEcsr);
+	RHINE_WAIT_FOR(!(inb(pioaddr + MACRegEEcsr) & 0x20));
+
+#ifdef USE_MMIO
+	/*
+	 * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable
+	 * MMIO. If reloading EEPROM was done first this could be avoided, but
+	 * it is not known if that still works with the "win98-reboot" problem.
+	 */
+	enable_mmio(pioaddr, rp->quirks);
+#endif
+
+	/* Turn off EEPROM-controlled wake-up (magic packet) */
+	if (rp->quirks & rqWOL)
+		iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA);
+
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rhine_poll(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	rhine_interrupt(dev->irq, (void *)dev, NULL);
+	enable_irq(dev->irq);
+}
+#endif
+
+static void rhine_hw_init(struct net_device *dev, long pioaddr)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	/* Reset the chip to erase previous misconfiguration. */
+	rhine_chip_reset(dev);
+
+	/* Rhine-I needs extra time to recuperate before EEPROM reload */
+	if (rp->quirks & rqRhineI)
+		msleep(5);
+
+	/* Reload EEPROM controlled bytes cleared by soft reset */
+	rhine_reload_eeprom(pioaddr, dev);
+}
+
+static int __devinit rhine_init_one(struct pci_dev *pdev,
+				    const struct pci_device_id *ent)
+{
+	struct net_device *dev;
+	struct rhine_private *rp;
+	int i, rc;
+	u8 pci_rev;
+	u32 quirks;
+	long pioaddr;
+	long memaddr;
+	void __iomem *ioaddr;
+	int io_size, phy_id;
+	const char *name;
+#ifdef USE_MMIO
+	int bar = 1;
+#else
+	int bar = 0;
+#endif
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+	static int printed_version;
+	if (!printed_version++)
+		printk(version);
+#endif
+
+	pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
+
+	io_size = 256;
+	phy_id = 0;
+	quirks = 0;
+	name = "Rhine";
+	if (pci_rev < VTunknown0) {
+		quirks = rqRhineI;
+		io_size = 128;
+	}
+	else if (pci_rev >= VT6102) {
+		quirks = rqWOL | rqForceReset;
+		if (pci_rev < VT6105) {
+			name = "Rhine II";
+			quirks |= rqStatusWBRace;	/* Rhine-II exclusive */
+		}
+		else {
+			phy_id = 1;	/* Integrated PHY, phy_id fixed to 1 */
+			if (pci_rev >= VT6105_B0)
+				quirks |= rq6patterns;
+			if (pci_rev < VT6105M)
+				name = "Rhine III";
+			else
+				name = "Rhine III (Management Adapter)";
+		}
+	}
+
+	rc = pci_enable_device(pdev);
+	if (rc)
+		goto err_out;
+
+	/* this should always be supported */
+	rc = pci_set_dma_mask(pdev, 0xffffffff);
+	if (rc) {
+		printk(KERN_ERR "32-bit PCI DMA addresses not supported by "
+		       "the card!?\n");
+		goto err_out;
+	}
+
+	/* sanity check */
+	if ((pci_resource_len(pdev, 0) < io_size) ||
+	    (pci_resource_len(pdev, 1) < io_size)) {
+		rc = -EIO;
+		printk(KERN_ERR "Insufficient PCI resources, aborting\n");
+		goto err_out;
+	}
+
+	pioaddr = pci_resource_start(pdev, 0);
+	memaddr = pci_resource_start(pdev, 1);
+
+	pci_set_master(pdev);
+
+	dev = alloc_etherdev(sizeof(struct rhine_private));
+	if (!dev) {
+		rc = -ENOMEM;
+		printk(KERN_ERR "alloc_etherdev failed\n");
+		goto err_out;
+	}
+	SET_MODULE_OWNER(dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	rp = netdev_priv(dev);
+	rp->quirks = quirks;
+	rp->pioaddr = pioaddr;
+	rp->pdev = pdev;
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc)
+		goto err_out_free_netdev;
+
+	ioaddr = pci_iomap(pdev, bar, io_size);
+	if (!ioaddr) {
+		rc = -EIO;
+		printk(KERN_ERR "ioremap failed for device %s, region 0x%X "
+		       "@ 0x%lX\n", pci_name(pdev), io_size, memaddr);
+		goto err_out_free_res;
+	}
+
+#ifdef USE_MMIO
+	enable_mmio(pioaddr, quirks);
+
+	/* Check that selected MMIO registers match the PIO ones */
+	i = 0;
+	while (mmio_verify_registers[i]) {
+		int reg = mmio_verify_registers[i++];
+		unsigned char a = inb(pioaddr+reg);
+		unsigned char b = readb(ioaddr+reg);
+		if (a != b) {
+			rc = -EIO;
+			printk(KERN_ERR "MMIO do not match PIO [%02x] "
+			       "(%02x != %02x)\n", reg, a, b);
+			goto err_out_unmap;
+		}
+	}
+#endif /* USE_MMIO */
+
+	dev->base_addr = (unsigned long)ioaddr;
+	rp->base = ioaddr;
+
+	/* Get chip registers into a sane state */
+	rhine_power_init(dev);
+	rhine_hw_init(dev, pioaddr);
+
+	for (i = 0; i < 6; i++)
+		dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
+
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		rc = -EIO;
+		printk(KERN_ERR "Invalid MAC address\n");
+		goto err_out_unmap;
+	}
+
+	/* For Rhine-I/II, phy_id is loaded from EEPROM */
+	if (!phy_id)
+		phy_id = ioread8(ioaddr + 0x6C);
+
+	dev->irq = pdev->irq;
+
+	spin_lock_init(&rp->lock);
+	rp->mii_if.dev = dev;
+	rp->mii_if.mdio_read = mdio_read;
+	rp->mii_if.mdio_write = mdio_write;
+	rp->mii_if.phy_id_mask = 0x1f;
+	rp->mii_if.reg_num_mask = 0x1f;
+
+	/* The chip-specific entries in the device structure. */
+	dev->open = rhine_open;
+	dev->hard_start_xmit = rhine_start_tx;
+	dev->stop = rhine_close;
+	dev->get_stats = rhine_get_stats;
+	dev->set_multicast_list = rhine_set_rx_mode;
+	dev->do_ioctl = netdev_ioctl;
+	dev->ethtool_ops = &netdev_ethtool_ops;
+	dev->tx_timeout = rhine_tx_timeout;
+	dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = rhine_poll;
+#endif
+	if (rp->quirks & rqRhineI)
+		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
+
+	/* dev->name not defined before register_netdev()! */
+	rc = register_netdev(dev);
+	if (rc)
+		goto err_out_unmap;
+
+	printk(KERN_INFO "%s: VIA %s at 0x%lx, ",
+	       dev->name, name,
+#ifdef USE_MMIO
+		memaddr
+#else
+		(long)ioaddr
+#endif
+		 );
+
+	for (i = 0; i < 5; i++)
+		printk("%2.2x:", dev->dev_addr[i]);
+	printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], pdev->irq);
+
+	pci_set_drvdata(pdev, dev);
+
+	{
+		u16 mii_cmd;
+		int mii_status = mdio_read(dev, phy_id, 1);
+		mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE;
+		mdio_write(dev, phy_id, MII_BMCR, mii_cmd);
+		if (mii_status != 0xffff && mii_status != 0x0000) {
+			rp->mii_if.advertising = mdio_read(dev, phy_id, 4);
+			printk(KERN_INFO "%s: MII PHY found at address "
+			       "%d, status 0x%4.4x advertising %4.4x "
+			       "Link %4.4x.\n", dev->name, phy_id,
+			       mii_status, rp->mii_if.advertising,
+			       mdio_read(dev, phy_id, 5));
+
+			/* set IFF_RUNNING */
+			if (mii_status & BMSR_LSTATUS)
+				netif_carrier_on(dev);
+			else
+				netif_carrier_off(dev);
+
+		}
+	}
+	rp->mii_if.phy_id = phy_id;
+
+	return 0;
+
+err_out_unmap:
+	pci_iounmap(pdev, ioaddr);
+err_out_free_res:
+	pci_release_regions(pdev);
+err_out_free_netdev:
+	free_netdev(dev);
+err_out:
+	return rc;
+}
+
+static int alloc_ring(struct net_device* dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void *ring;
+	dma_addr_t ring_dma;
+
+	ring = pci_alloc_consistent(rp->pdev,
+				    RX_RING_SIZE * sizeof(struct rx_desc) +
+				    TX_RING_SIZE * sizeof(struct tx_desc),
+				    &ring_dma);
+	if (!ring) {
+		printk(KERN_ERR "Could not allocate DMA memory.\n");
+		return -ENOMEM;
+	}
+	if (rp->quirks & rqRhineI) {
+		rp->tx_bufs = pci_alloc_consistent(rp->pdev,
+						   PKT_BUF_SZ * TX_RING_SIZE,
+						   &rp->tx_bufs_dma);
+		if (rp->tx_bufs == NULL) {
+			pci_free_consistent(rp->pdev,
+				    RX_RING_SIZE * sizeof(struct rx_desc) +
+				    TX_RING_SIZE * sizeof(struct tx_desc),
+				    ring, ring_dma);
+			return -ENOMEM;
+		}
+	}
+
+	rp->rx_ring = ring;
+	rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc);
+	rp->rx_ring_dma = ring_dma;
+	rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc);
+
+	return 0;
+}
+
+static void free_ring(struct net_device* dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	pci_free_consistent(rp->pdev,
+			    RX_RING_SIZE * sizeof(struct rx_desc) +
+			    TX_RING_SIZE * sizeof(struct tx_desc),
+			    rp->rx_ring, rp->rx_ring_dma);
+	rp->tx_ring = NULL;
+
+	if (rp->tx_bufs)
+		pci_free_consistent(rp->pdev, PKT_BUF_SZ * TX_RING_SIZE,
+				    rp->tx_bufs, rp->tx_bufs_dma);
+
+	rp->tx_bufs = NULL;
+
+}
+
+static void alloc_rbufs(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	dma_addr_t next;
+	int i;
+
+	rp->dirty_rx = rp->cur_rx = 0;
+
+	rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
+	rp->rx_head_desc = &rp->rx_ring[0];
+	next = rp->rx_ring_dma;
+
+	/* Init the ring entries */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		rp->rx_ring[i].rx_status = 0;
+		rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz);
+		next += sizeof(struct rx_desc);
+		rp->rx_ring[i].next_desc = cpu_to_le32(next);
+		rp->rx_skbuff[i] = NULL;
+	}
+	/* Mark the last entry as wrapping the ring. */
+	rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma);
+
+	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz);
+		rp->rx_skbuff[i] = skb;
+		if (skb == NULL)
+			break;
+		skb->dev = dev;                 /* Mark as being used by this device. */
+
+		rp->rx_skbuff_dma[i] =
+			pci_map_single(rp->pdev, skb->tail, rp->rx_buf_sz,
+				       PCI_DMA_FROMDEVICE);
+
+		rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]);
+		rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn);
+	}
+	rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+}
+
+static void free_rbufs(struct net_device* dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	int i;
+
+	/* Free all the skbuffs in the Rx queue. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		rp->rx_ring[i].rx_status = 0;
+		rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
+		if (rp->rx_skbuff[i]) {
+			pci_unmap_single(rp->pdev,
+					 rp->rx_skbuff_dma[i],
+					 rp->rx_buf_sz, PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(rp->rx_skbuff[i]);
+		}
+		rp->rx_skbuff[i] = NULL;
+	}
+}
+
+static void alloc_tbufs(struct net_device* dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	dma_addr_t next;
+	int i;
+
+	rp->dirty_tx = rp->cur_tx = 0;
+	next = rp->tx_ring_dma;
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		rp->tx_skbuff[i] = NULL;
+		rp->tx_ring[i].tx_status = 0;
+		rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
+		next += sizeof(struct tx_desc);
+		rp->tx_ring[i].next_desc = cpu_to_le32(next);
+		rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ];
+	}
+	rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma);
+
+}
+
+static void free_tbufs(struct net_device* dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	int i;
+
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		rp->tx_ring[i].tx_status = 0;
+		rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
+		rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
+		if (rp->tx_skbuff[i]) {
+			if (rp->tx_skbuff_dma[i]) {
+				pci_unmap_single(rp->pdev,
+						 rp->tx_skbuff_dma[i],
+						 rp->tx_skbuff[i]->len,
+						 PCI_DMA_TODEVICE);
+			}
+			dev_kfree_skb(rp->tx_skbuff[i]);
+		}
+		rp->tx_skbuff[i] = NULL;
+		rp->tx_buf[i] = NULL;
+	}
+}
+
+static void rhine_check_media(struct net_device *dev, unsigned int init_media)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	mii_check_media(&rp->mii_if, debug, init_media);
+
+	if (rp->mii_if.full_duplex)
+	    iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex,
+		   ioaddr + ChipCmd1);
+	else
+	    iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex,
+		   ioaddr + ChipCmd1);
+}
+
+static void init_registers(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	int i;
+
+	for (i = 0; i < 6; i++)
+		iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
+
+	/* Initialize other registers. */
+	iowrite16(0x0006, ioaddr + PCIBusConfig);	/* Tune configuration??? */
+	/* Configure initial FIFO thresholds. */
+	iowrite8(0x20, ioaddr + TxConfig);
+	rp->tx_thresh = 0x20;
+	rp->rx_thresh = 0x60;		/* Written in rhine_set_rx_mode(). */
+
+	iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr);
+	iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr);
+
+	rhine_set_rx_mode(dev);
+
+	/* Enable interrupts by setting the interrupt mask. */
+	iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
+	       IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
+	       IntrTxDone | IntrTxError | IntrTxUnderrun |
+	       IntrPCIErr | IntrStatsMax | IntrLinkChange,
+	       ioaddr + IntrEnable);
+
+	iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8),
+	       ioaddr + ChipCmd);
+	rhine_check_media(dev, 1);
+}
+
+/* Enable MII link status auto-polling (required for IntrLinkChange) */
+static void rhine_enable_linkmon(void __iomem *ioaddr)
+{
+	iowrite8(0, ioaddr + MIICmd);
+	iowrite8(MII_BMSR, ioaddr + MIIRegAddr);
+	iowrite8(0x80, ioaddr + MIICmd);
+
+	RHINE_WAIT_FOR((ioread8(ioaddr + MIIRegAddr) & 0x20));
+
+	iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr);
+}
+
+/* Disable MII link status auto-polling (required for MDIO access) */
+static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks)
+{
+	iowrite8(0, ioaddr + MIICmd);
+
+	if (quirks & rqRhineI) {
+		iowrite8(0x01, ioaddr + MIIRegAddr);	// MII_BMSR
+
+		/* Can be called from ISR. Evil. */
+		mdelay(1);
+
+		/* 0x80 must be set immediately before turning it off */
+		iowrite8(0x80, ioaddr + MIICmd);
+
+		RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x20);
+
+		/* Heh. Now clear 0x80 again. */
+		iowrite8(0, ioaddr + MIICmd);
+	}
+	else
+		RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x80);
+}
+
+/* Read and write over the MII Management Data I/O (MDIO) interface. */
+
+static int mdio_read(struct net_device *dev, int phy_id, int regnum)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	int result;
+
+	rhine_disable_linkmon(ioaddr, rp->quirks);
+
+	/* rhine_disable_linkmon already cleared MIICmd */
+	iowrite8(phy_id, ioaddr + MIIPhyAddr);
+	iowrite8(regnum, ioaddr + MIIRegAddr);
+	iowrite8(0x40, ioaddr + MIICmd);		/* Trigger read */
+	RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x40));
+	result = ioread16(ioaddr + MIIData);
+
+	rhine_enable_linkmon(ioaddr);
+	return result;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	rhine_disable_linkmon(ioaddr, rp->quirks);
+
+	/* rhine_disable_linkmon already cleared MIICmd */
+	iowrite8(phy_id, ioaddr + MIIPhyAddr);
+	iowrite8(regnum, ioaddr + MIIRegAddr);
+	iowrite16(value, ioaddr + MIIData);
+	iowrite8(0x20, ioaddr + MIICmd);		/* Trigger write */
+	RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x20));
+
+	rhine_enable_linkmon(ioaddr);
+}
+
+static int rhine_open(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	int rc;
+
+	rc = request_irq(rp->pdev->irq, &rhine_interrupt, SA_SHIRQ, dev->name,
+			dev);
+	if (rc)
+		return rc;
+
+	if (debug > 1)
+		printk(KERN_DEBUG "%s: rhine_open() irq %d.\n",
+		       dev->name, rp->pdev->irq);
+
+	rc = alloc_ring(dev);
+	if (rc) {
+		free_irq(rp->pdev->irq, dev);
+		return rc;
+	}
+	alloc_rbufs(dev);
+	alloc_tbufs(dev);
+	rhine_chip_reset(dev);
+	init_registers(dev);
+	if (debug > 2)
+		printk(KERN_DEBUG "%s: Done rhine_open(), status %4.4x "
+		       "MII status: %4.4x.\n",
+		       dev->name, ioread16(ioaddr + ChipCmd),
+		       mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+static void rhine_tx_timeout(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
+	       "%4.4x, resetting...\n",
+	       dev->name, ioread16(ioaddr + IntrStatus),
+	       mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+
+	/* protect against concurrent rx interrupts */
+	disable_irq(rp->pdev->irq);
+
+	spin_lock(&rp->lock);
+
+	/* clear all descriptors */
+	free_tbufs(dev);
+	free_rbufs(dev);
+	alloc_tbufs(dev);
+	alloc_rbufs(dev);
+
+	/* Reinitialize the hardware. */
+	rhine_chip_reset(dev);
+	init_registers(dev);
+
+	spin_unlock(&rp->lock);
+	enable_irq(rp->pdev->irq);
+
+	dev->trans_start = jiffies;
+	rp->stats.tx_errors++;
+	netif_wake_queue(dev);
+}
+
+static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	unsigned entry;
+
+	/* Caution: the write order is important here, set the field
+	   with the "ownership" bits last. */
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = rp->cur_tx % TX_RING_SIZE;
+
+	if (skb->len < ETH_ZLEN) {
+		skb = skb_padto(skb, ETH_ZLEN);
+		if (skb == NULL)
+			return 0;
+	}
+
+	rp->tx_skbuff[entry] = skb;
+
+	if ((rp->quirks & rqRhineI) &&
+	    (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_HW)) {
+		/* Must use alignment buffer. */
+		if (skb->len > PKT_BUF_SZ) {
+			/* packet too long, drop it */
+			dev_kfree_skb(skb);
+			rp->tx_skbuff[entry] = NULL;
+			rp->stats.tx_dropped++;
+			return 0;
+		}
+		skb_copy_and_csum_dev(skb, rp->tx_buf[entry]);
+		rp->tx_skbuff_dma[entry] = 0;
+		rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma +
+						      (rp->tx_buf[entry] -
+						       rp->tx_bufs));
+	} else {
+		rp->tx_skbuff_dma[entry] =
+			pci_map_single(rp->pdev, skb->data, skb->len,
+				       PCI_DMA_TODEVICE);
+		rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]);
+	}
+
+	rp->tx_ring[entry].desc_length =
+		cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
+
+	/* lock eth irq */
+	spin_lock_irq(&rp->lock);
+	wmb();
+	rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
+	wmb();
+
+	rp->cur_tx++;
+
+	/* Non-x86 Todo: explicitly flush cache lines here. */
+
+	/* Wake the potentially-idle transmit channel */
+	iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
+	       ioaddr + ChipCmd1);
+	IOSYNC;
+
+	if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN)
+		netif_stop_queue(dev);
+
+	dev->trans_start = jiffies;
+
+	spin_unlock_irq(&rp->lock);
+
+	if (debug > 4) {
+		printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
+		       dev->name, rp->cur_tx-1, entry);
+	}
+	return 0;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *rgs)
+{
+	struct net_device *dev = dev_instance;
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	u32 intr_status;
+	int boguscnt = max_interrupt_work;
+	int handled = 0;
+
+	while ((intr_status = get_intr_status(dev))) {
+		handled = 1;
+
+		/* Acknowledge all of the current interrupt sources ASAP. */
+		if (intr_status & IntrTxDescRace)
+			iowrite8(0x08, ioaddr + IntrStatus2);
+		iowrite16(intr_status & 0xffff, ioaddr + IntrStatus);
+		IOSYNC;
+
+		if (debug > 4)
+			printk(KERN_DEBUG "%s: Interrupt, status %8.8x.\n",
+			       dev->name, intr_status);
+
+		if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped |
+		    IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf))
+			rhine_rx(dev);
+
+		if (intr_status & (IntrTxErrSummary | IntrTxDone)) {
+			if (intr_status & IntrTxErrSummary) {
+				/* Avoid scavenging before Tx engine turned off */
+				RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn));
+				if (debug > 2 &&
+				    ioread8(ioaddr+ChipCmd) & CmdTxOn)
+					printk(KERN_WARNING "%s: "
+					       "rhine_interrupt() Tx engine"
+					       "still on.\n", dev->name);
+			}
+			rhine_tx(dev);
+		}
+
+		/* Abnormal error summary/uncommon events handlers. */
+		if (intr_status & (IntrPCIErr | IntrLinkChange |
+				   IntrStatsMax | IntrTxError | IntrTxAborted |
+				   IntrTxUnderrun | IntrTxDescRace))
+			rhine_error(dev, intr_status);
+
+		if (--boguscnt < 0) {
+			printk(KERN_WARNING "%s: Too much work at interrupt, "
+			       "status=%#8.8x.\n",
+			       dev->name, intr_status);
+			break;
+		}
+	}
+
+	if (debug > 3)
+		printk(KERN_DEBUG "%s: exiting interrupt, status=%8.8x.\n",
+		       dev->name, ioread16(ioaddr + IntrStatus));
+	return IRQ_RETVAL(handled);
+}
+
+/* This routine is logically part of the interrupt handler, but isolated
+   for clarity. */
+static void rhine_tx(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE;
+
+	spin_lock(&rp->lock);
+
+	/* find and cleanup dirty tx descriptors */
+	while (rp->dirty_tx != rp->cur_tx) {
+		txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status);
+		if (debug > 6)
+			printk(KERN_DEBUG " Tx scavenge %d status %8.8x.\n",
+			       entry, txstatus);
+		if (txstatus & DescOwn)
+			break;
+		if (txstatus & 0x8000) {
+			if (debug > 1)
+				printk(KERN_DEBUG "%s: Transmit error, "
+				       "Tx status %8.8x.\n",
+				       dev->name, txstatus);
+			rp->stats.tx_errors++;
+			if (txstatus & 0x0400) rp->stats.tx_carrier_errors++;
+			if (txstatus & 0x0200) rp->stats.tx_window_errors++;
+			if (txstatus & 0x0100) rp->stats.tx_aborted_errors++;
+			if (txstatus & 0x0080) rp->stats.tx_heartbeat_errors++;
+			if (((rp->quirks & rqRhineI) && txstatus & 0x0002) ||
+			    (txstatus & 0x0800) || (txstatus & 0x1000)) {
+				rp->stats.tx_fifo_errors++;
+				rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
+				break; /* Keep the skb - we try again */
+			}
+			/* Transmitter restarted in 'abnormal' handler. */
+		} else {
+			if (rp->quirks & rqRhineI)
+				rp->stats.collisions += (txstatus >> 3) & 0x0F;
+			else
+				rp->stats.collisions += txstatus & 0x0F;
+			if (debug > 6)
+				printk(KERN_DEBUG "collisions: %1.1x:%1.1x\n",
+				       (txstatus >> 3) & 0xF,
+				       txstatus & 0xF);
+			rp->stats.tx_bytes += rp->tx_skbuff[entry]->len;
+			rp->stats.tx_packets++;
+		}
+		/* Free the original skb. */
+		if (rp->tx_skbuff_dma[entry]) {
+			pci_unmap_single(rp->pdev,
+					 rp->tx_skbuff_dma[entry],
+					 rp->tx_skbuff[entry]->len,
+					 PCI_DMA_TODEVICE);
+		}
+		dev_kfree_skb_irq(rp->tx_skbuff[entry]);
+		rp->tx_skbuff[entry] = NULL;
+		entry = (++rp->dirty_tx) % TX_RING_SIZE;
+	}
+	if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4)
+		netif_wake_queue(dev);
+
+	spin_unlock(&rp->lock);
+}
+
+/* This routine is logically part of the interrupt handler, but isolated
+   for clarity and better register allocation. */
+static void rhine_rx(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	int entry = rp->cur_rx % RX_RING_SIZE;
+	int boguscnt = rp->dirty_rx + RX_RING_SIZE - rp->cur_rx;
+
+	if (debug > 4) {
+		printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n",
+		       dev->name, entry,
+		       le32_to_cpu(rp->rx_head_desc->rx_status));
+	}
+
+	/* If EOP is set on the next entry, it's a new packet. Send it up. */
+	while (!(rp->rx_head_desc->rx_status & cpu_to_le32(DescOwn))) {
+		struct rx_desc *desc = rp->rx_head_desc;
+		u32 desc_status = le32_to_cpu(desc->rx_status);
+		int data_size = desc_status >> 16;
+
+		if (debug > 4)
+			printk(KERN_DEBUG " rhine_rx() status is %8.8x.\n",
+			       desc_status);
+		if (--boguscnt < 0)
+			break;
+		if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) {
+			if ((desc_status & RxWholePkt) != RxWholePkt) {
+				printk(KERN_WARNING "%s: Oversized Ethernet "
+				       "frame spanned multiple buffers, entry "
+				       "%#x length %d status %8.8x!\n",
+				       dev->name, entry, data_size,
+				       desc_status);
+				printk(KERN_WARNING "%s: Oversized Ethernet "
+				       "frame %p vs %p.\n", dev->name,
+				       rp->rx_head_desc, &rp->rx_ring[entry]);
+				rp->stats.rx_length_errors++;
+			} else if (desc_status & RxErr) {
+				/* There was a error. */
+				if (debug > 2)
+					printk(KERN_DEBUG " rhine_rx() Rx "
+					       "error was %8.8x.\n",
+					       desc_status);
+				rp->stats.rx_errors++;
+				if (desc_status & 0x0030) rp->stats.rx_length_errors++;
+				if (desc_status & 0x0048) rp->stats.rx_fifo_errors++;
+				if (desc_status & 0x0004) rp->stats.rx_frame_errors++;
+				if (desc_status & 0x0002) {
+					/* this can also be updated outside the interrupt handler */
+					spin_lock(&rp->lock);
+					rp->stats.rx_crc_errors++;
+					spin_unlock(&rp->lock);
+				}
+			}
+		} else {
+			struct sk_buff *skb;
+			/* Length should omit the CRC */
+			int pkt_len = data_size - 4;
+
+			/* Check if the packet is long enough to accept without
+			   copying to a minimally-sized skbuff. */
+			if (pkt_len < rx_copybreak &&
+				(skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+				skb->dev = dev;
+				skb_reserve(skb, 2);	/* 16 byte align the IP header */
+				pci_dma_sync_single_for_cpu(rp->pdev,
+							    rp->rx_skbuff_dma[entry],
+							    rp->rx_buf_sz,
+							    PCI_DMA_FROMDEVICE);
+
+				eth_copy_and_sum(skb,
+						 rp->rx_skbuff[entry]->tail,
+						 pkt_len, 0);
+				skb_put(skb, pkt_len);
+				pci_dma_sync_single_for_device(rp->pdev,
+							       rp->rx_skbuff_dma[entry],
+							       rp->rx_buf_sz,
+							       PCI_DMA_FROMDEVICE);
+			} else {
+				skb = rp->rx_skbuff[entry];
+				if (skb == NULL) {
+					printk(KERN_ERR "%s: Inconsistent Rx "
+					       "descriptor chain.\n",
+					       dev->name);
+					break;
+				}
+				rp->rx_skbuff[entry] = NULL;
+				skb_put(skb, pkt_len);
+				pci_unmap_single(rp->pdev,
+						 rp->rx_skbuff_dma[entry],
+						 rp->rx_buf_sz,
+						 PCI_DMA_FROMDEVICE);
+			}
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
+			dev->last_rx = jiffies;
+			rp->stats.rx_bytes += pkt_len;
+			rp->stats.rx_packets++;
+		}
+		entry = (++rp->cur_rx) % RX_RING_SIZE;
+		rp->rx_head_desc = &rp->rx_ring[entry];
+	}
+
+	/* Refill the Rx ring buffers. */
+	for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) {
+		struct sk_buff *skb;
+		entry = rp->dirty_rx % RX_RING_SIZE;
+		if (rp->rx_skbuff[entry] == NULL) {
+			skb = dev_alloc_skb(rp->rx_buf_sz);
+			rp->rx_skbuff[entry] = skb;
+			if (skb == NULL)
+				break;	/* Better luck next round. */
+			skb->dev = dev;	/* Mark as being used by this device. */
+			rp->rx_skbuff_dma[entry] =
+				pci_map_single(rp->pdev, skb->tail,
+					       rp->rx_buf_sz,
+					       PCI_DMA_FROMDEVICE);
+			rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]);
+		}
+		rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn);
+	}
+}
+
+/*
+ * Clears the "tally counters" for CRC errors and missed frames(?).
+ * It has been reported that some chips need a write of 0 to clear
+ * these, for others the counters are set to 1 when written to and
+ * instead cleared when read. So we clear them both ways ...
+ */
+static inline void clear_tally_counters(void __iomem *ioaddr)
+{
+	iowrite32(0, ioaddr + RxMissed);
+	ioread16(ioaddr + RxCRCErrs);
+	ioread16(ioaddr + RxMissed);
+}
+
+static void rhine_restart_tx(struct net_device *dev) {
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	int entry = rp->dirty_tx % TX_RING_SIZE;
+	u32 intr_status;
+
+	/*
+	 * If new errors occured, we need to sort them out before doing Tx.
+	 * In that case the ISR will be back here RSN anyway.
+	 */
+	intr_status = get_intr_status(dev);
+
+	if ((intr_status & IntrTxErrSummary) == 0) {
+
+		/* We know better than the chip where it should continue. */
+		iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc),
+		       ioaddr + TxRingPtr);
+
+		iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn,
+		       ioaddr + ChipCmd);
+		iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
+		       ioaddr + ChipCmd1);
+		IOSYNC;
+	}
+	else {
+		/* This should never happen */
+		if (debug > 1)
+			printk(KERN_WARNING "%s: rhine_restart_tx() "
+			       "Another error occured %8.8x.\n",
+			       dev->name, intr_status);
+	}
+
+}
+
+static void rhine_error(struct net_device *dev, int intr_status)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	spin_lock(&rp->lock);
+
+	if (intr_status & IntrLinkChange)
+		rhine_check_media(dev, 0);
+	if (intr_status & IntrStatsMax) {
+		rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
+		rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
+		clear_tally_counters(ioaddr);
+	}
+	if (intr_status & IntrTxAborted) {
+		if (debug > 1)
+			printk(KERN_INFO "%s: Abort %8.8x, frame dropped.\n",
+			       dev->name, intr_status);
+	}
+	if (intr_status & IntrTxUnderrun) {
+		if (rp->tx_thresh < 0xE0)
+			iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig);
+		if (debug > 1)
+			printk(KERN_INFO "%s: Transmitter underrun, Tx "
+			       "threshold now %2.2x.\n",
+			       dev->name, rp->tx_thresh);
+	}
+	if (intr_status & IntrTxDescRace) {
+		if (debug > 2)
+			printk(KERN_INFO "%s: Tx descriptor write-back race.\n",
+			       dev->name);
+	}
+	if ((intr_status & IntrTxError) &&
+	    (intr_status & (IntrTxAborted |
+	     IntrTxUnderrun | IntrTxDescRace)) == 0) {
+		if (rp->tx_thresh < 0xE0) {
+			iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig);
+		}
+		if (debug > 1)
+			printk(KERN_INFO "%s: Unspecified error. Tx "
+			       "threshold now %2.2x.\n",
+			       dev->name, rp->tx_thresh);
+	}
+	if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace |
+			   IntrTxError))
+		rhine_restart_tx(dev);
+
+	if (intr_status & ~(IntrLinkChange | IntrStatsMax | IntrTxUnderrun |
+			    IntrTxError | IntrTxAborted | IntrNormalSummary |
+			    IntrTxDescRace)) {
+		if (debug > 1)
+			printk(KERN_ERR "%s: Something Wicked happened! "
+			       "%8.8x.\n", dev->name, intr_status);
+	}
+
+	spin_unlock(&rp->lock);
+}
+
+static struct net_device_stats *rhine_get_stats(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rp->lock, flags);
+	rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
+	rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
+	clear_tally_counters(ioaddr);
+	spin_unlock_irqrestore(&rp->lock, flags);
+
+	return &rp->stats;
+}
+
+static void rhine_set_rx_mode(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	u32 mc_filter[2];	/* Multicast hash filter */
+	u8 rx_mode;		/* Note: 0x02=accept runt, 0x01=accept errs */
+
+	if (dev->flags & IFF_PROMISC) {		/* Set promiscuous. */
+		/* Unconditionally log net taps. */
+		printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n",
+		       dev->name);
+		rx_mode = 0x1C;
+		iowrite32(0xffffffff, ioaddr + MulticastFilter0);
+		iowrite32(0xffffffff, ioaddr + MulticastFilter1);
+	} else if ((dev->mc_count > multicast_filter_limit)
+		   || (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to match, or accept all multicasts. */
+		iowrite32(0xffffffff, ioaddr + MulticastFilter0);
+		iowrite32(0xffffffff, ioaddr + MulticastFilter1);
+		rx_mode = 0x0C;
+	} else {
+		struct dev_mc_list *mclist;
+		int i;
+		memset(mc_filter, 0, sizeof(mc_filter));
+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		     i++, mclist = mclist->next) {
+			int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+		}
+		iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
+		iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
+		rx_mode = 0x0C;
+	}
+	iowrite8(rp->rx_thresh | rx_mode, ioaddr + RxConfig);
+}
+
+static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->bus_info, pci_name(rp->pdev));
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	int rc;
+
+	spin_lock_irq(&rp->lock);
+	rc = mii_ethtool_gset(&rp->mii_if, cmd);
+	spin_unlock_irq(&rp->lock);
+
+	return rc;
+}
+
+static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	int rc;
+
+	spin_lock_irq(&rp->lock);
+	rc = mii_ethtool_sset(&rp->mii_if, cmd);
+	spin_unlock_irq(&rp->lock);
+
+	return rc;
+}
+
+static int netdev_nway_reset(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	return mii_nway_restart(&rp->mii_if);
+}
+
+static u32 netdev_get_link(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	return mii_link_ok(&rp->mii_if);
+}
+
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+	return debug;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 value)
+{
+	debug = value;
+}
+
+static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	if (!(rp->quirks & rqWOL))
+		return;
+
+	spin_lock_irq(&rp->lock);
+	wol->supported = WAKE_PHY | WAKE_MAGIC |
+			 WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;	/* Untested */
+	wol->wolopts = rp->wolopts;
+	spin_unlock_irq(&rp->lock);
+}
+
+static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	u32 support = WAKE_PHY | WAKE_MAGIC |
+		      WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;	/* Untested */
+
+	if (!(rp->quirks & rqWOL))
+		return -EINVAL;
+
+	if (wol->wolopts & ~support)
+		return -EINVAL;
+
+	spin_lock_irq(&rp->lock);
+	rp->wolopts = wol->wolopts;
+	spin_unlock_irq(&rp->lock);
+
+	return 0;
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+	.get_settings		= netdev_get_settings,
+	.set_settings		= netdev_set_settings,
+	.nway_reset		= netdev_nway_reset,
+	.get_link		= netdev_get_link,
+	.get_msglevel		= netdev_get_msglevel,
+	.set_msglevel		= netdev_set_msglevel,
+	.get_wol		= rhine_get_wol,
+	.set_wol		= rhine_set_wol,
+	.get_sg			= ethtool_op_get_sg,
+	.get_tx_csum		= ethtool_op_get_tx_csum,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	int rc;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	spin_lock_irq(&rp->lock);
+	rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL);
+	spin_unlock_irq(&rp->lock);
+
+	return rc;
+}
+
+static int rhine_close(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	spin_lock_irq(&rp->lock);
+
+	netif_stop_queue(dev);
+
+	if (debug > 1)
+		printk(KERN_DEBUG "%s: Shutting down ethercard, "
+		       "status was %4.4x.\n",
+		       dev->name, ioread16(ioaddr + ChipCmd));
+
+	/* Switch to loopback mode to avoid hardware races. */
+	iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig);
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	iowrite16(0x0000, ioaddr + IntrEnable);
+
+	/* Stop the chip's Tx and Rx processes. */
+	iowrite16(CmdStop, ioaddr + ChipCmd);
+
+	spin_unlock_irq(&rp->lock);
+
+	free_irq(rp->pdev->irq, dev);
+	free_rbufs(dev);
+	free_tbufs(dev);
+	free_ring(dev);
+
+	return 0;
+}
+
+
+static void __devexit rhine_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct rhine_private *rp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+
+	pci_iounmap(pdev, rp->base);
+	pci_release_regions(pdev);
+
+	free_netdev(dev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static void rhine_shutdown (struct device *gendev)
+{
+	struct pci_dev *pdev = to_pci_dev(gendev);
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	if (!(rp->quirks & rqWOL))
+		return; /* Nothing to do for non-WOL adapters */
+
+	rhine_power_init(dev);
+
+	/* Make sure we use pattern 0, 1 and not 4, 5 */
+	if (rp->quirks & rq6patterns)
+		iowrite8(0x04, ioaddr + 0xA7);
+
+	if (rp->wolopts & WAKE_MAGIC) {
+		iowrite8(WOLmagic, ioaddr + WOLcrSet);
+		/*
+		 * Turn EEPROM-controlled wake-up back on -- some hardware may
+		 * not cooperate otherwise.
+		 */
+		iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA);
+	}
+
+	if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST))
+		iowrite8(WOLbmcast, ioaddr + WOLcgSet);
+
+	if (rp->wolopts & WAKE_PHY)
+		iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet);
+
+	if (rp->wolopts & WAKE_UCAST)
+		iowrite8(WOLucast, ioaddr + WOLcrSet);
+
+	if (rp->wolopts) {
+		/* Enable legacy WOL (for old motherboards) */
+		iowrite8(0x01, ioaddr + PwcfgSet);
+		iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW);
+	}
+
+	/* Hit power state D3 (sleep) */
+	iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);
+
+	/* TODO: Check use of pci_enable_wake() */
+
+}
+
+#ifdef CONFIG_PM
+static int rhine_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct rhine_private *rp = netdev_priv(dev);
+	unsigned long flags;
+
+	if (!netif_running(dev))
+		return 0;
+
+	netif_device_detach(dev);
+	pci_save_state(pdev);
+
+	spin_lock_irqsave(&rp->lock, flags);
+	rhine_shutdown(&pdev->dev);
+	spin_unlock_irqrestore(&rp->lock, flags);
+
+	free_irq(dev->irq, dev);
+	return 0;
+}
+
+static int rhine_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct rhine_private *rp = netdev_priv(dev);
+	unsigned long flags;
+	int ret;
+
+	if (!netif_running(dev))
+		return 0;
+
+        if (request_irq(dev->irq, rhine_interrupt, SA_SHIRQ, dev->name, dev))
+		printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name);
+
+	ret = pci_set_power_state(pdev, PCI_D0);
+	if (debug > 1)
+		printk(KERN_INFO "%s: Entering power state D0 %s (%d).\n",
+			dev->name, ret ? "failed" : "succeeded", ret);
+
+	pci_restore_state(pdev);
+
+	spin_lock_irqsave(&rp->lock, flags);
+#ifdef USE_MMIO
+	enable_mmio(rp->pioaddr, rp->quirks);
+#endif
+	rhine_power_init(dev);
+	free_tbufs(dev);
+	free_rbufs(dev);
+	alloc_tbufs(dev);
+	alloc_rbufs(dev);
+	init_registers(dev);
+	spin_unlock_irqrestore(&rp->lock, flags);
+
+	netif_device_attach(dev);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static struct pci_driver rhine_driver = {
+	.name		= DRV_NAME,
+	.id_table	= rhine_pci_tbl,
+	.probe		= rhine_init_one,
+	.remove		= __devexit_p(rhine_remove_one),
+#ifdef CONFIG_PM
+	.suspend	= rhine_suspend,
+	.resume		= rhine_resume,
+#endif /* CONFIG_PM */
+	.driver = {
+		.shutdown = rhine_shutdown,
+	}
+};
+
+
+static int __init rhine_init(void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+	printk(version);
+#endif
+	return pci_module_init(&rhine_driver);
+}
+
+
+static void __exit rhine_cleanup(void)
+{
+	pci_unregister_driver(&rhine_driver);
+}
+
+
+module_init(rhine_init);
+module_exit(rhine_cleanup);