Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 344 insertions, 0 deletions

diff --git a/drivers/net/wan/sdla_ft1.c b/drivers/net/wan/sdla_ft1.c
new file mode 100644
index 00000000000..5e3124856eb
--- /dev/null
+++ b/drivers/net/wan/sdla_ft1.c
@@ -0,0 +1,344 @@
+/*****************************************************************************
+* sdla_chdlc.c	WANPIPE(tm) Multiprotocol WAN Link Driver. Cisco HDLC module.
+*
+* Authors: 	Nenad Corbic <ncorbic@sangoma.com>
+*		Gideon Hack  
+*
+* Copyright:	(c) 1995-1999 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Sep 30, 1999  Nenad Corbic    Fixed dynamic IP and route setup.
+* Sep 23, 1999  Nenad Corbic    Added SMP support, fixed tracing 
+* Sep 13, 1999  Nenad Corbic	Split up Port 0 and 1 into separate devices.
+* Jun 02, 1999  Gideon Hack     Added support for the S514 adapter.
+* Oct 30, 1998	Jaspreet Singh	Added Support for CHDLC API (HDLC STREAMING).
+* Oct 28, 1998	Jaspreet Singh	Added Support for Dual Port CHDLC.
+* Aug 07, 1998	David Fong	Initial version.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>	/* printk(), and other useful stuff */
+#include <linux/stddef.h>	/* offsetof(), etc. */
+#include <linux/errno.h>	/* return codes */
+#include <linux/string.h>	/* inline memset(), etc. */
+#include <linux/slab.h>		/* kmalloc(), kfree() */
+#include <linux/wanrouter.h>	/* WAN router definitions */
+#include <linux/wanpipe.h>	/* WANPIPE common user API definitions */
+#include <linux/if_arp.h>	/* ARPHRD_* defines */
+
+#include <linux/inetdevice.h>
+#include <asm/uaccess.h>
+
+#include <linux/in.h>		/* sockaddr_in */
+#include <linux/inet.h>	
+#include <linux/if.h>
+#include <asm/byteorder.h>	/* htons(), etc. */
+#include <linux/sdlapci.h>
+#include <asm/io.h>
+
+#include <linux/sdla_chdlc.h>		/* CHDLC firmware API definitions */
+
+/****** Defines & Macros ****************************************************/
+
+/* reasons for enabling the timer interrupt on the adapter */
+#define TMR_INT_ENABLED_UDP   	0x0001
+#define TMR_INT_ENABLED_UPDATE	0x0002
+ 
+#define	CHDLC_DFLT_DATA_LEN	1500		/* default MTU */
+#define CHDLC_HDR_LEN		1
+
+#define IFF_POINTTOPOINT 0x10
+
+#define WANPIPE 0x00
+#define API	0x01
+#define CHDLC_API 0x01
+
+#define PORT(x)   (x == 0 ? "PRIMARY" : "SECONDARY" )
+
+ 
+/******Data Structures*****************************************************/
+
+/* This structure is placed in the private data area of the device structure.
+ * The card structure used to occupy the private area but now the following 
+ * structure will incorporate the card structure along with CHDLC specific data
+ */
+
+typedef struct chdlc_private_area
+{
+	struct net_device *slave;
+	sdla_t		*card;
+	int 		TracingEnabled;		/* For enabling Tracing */
+	unsigned long 	curr_trace_addr;	/* Used for Tracing */
+	unsigned long 	start_trace_addr;
+	unsigned long 	end_trace_addr;
+	unsigned long 	base_addr_trace_buffer;
+	unsigned long 	end_addr_trace_buffer;
+	unsigned short 	number_trace_elements;
+	unsigned  	available_buffer_space;
+	unsigned long 	router_start_time;
+	unsigned char 	route_status;
+	unsigned char 	route_removed;
+	unsigned long 	tick_counter;		/* For 5s timeout counter */
+	unsigned long 	router_up_time;
+        u32             IP_address;		/* IP addressing */
+        u32             IP_netmask;
+	unsigned char  mc;			/* Mulitcast support on/off */
+	unsigned short udp_pkt_lgth;		/* udp packet processing */
+	char udp_pkt_src;
+	char udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT];
+	unsigned short timer_int_enabled;
+	char update_comms_stats;		/* updating comms stats */
+	//FIXME: add driver stats as per frame relay!
+
+} chdlc_private_area_t;
+
+/* Route Status options */
+#define NO_ROUTE	0x00
+#define ADD_ROUTE	0x01
+#define ROUTE_ADDED	0x02
+#define REMOVE_ROUTE	0x03
+
+
+/****** Function Prototypes *************************************************/
+/* WAN link driver entry points. These are called by the WAN router module. */
+static int wpft1_exec (struct sdla *card, void *u_cmd, void *u_data);
+static int chdlc_read_version (sdla_t* card, char* str);
+static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb);
+
+/****** Public Functions ****************************************************/
+
+/*============================================================================
+ * Cisco HDLC protocol initialization routine.
+ *
+ * This routine is called by the main WANPIPE module during setup.  At this
+ * point adapter is completely initialized and firmware is running.
+ *  o read firmware version (to make sure it's alive)
+ *  o configure adapter
+ *  o initialize protocol-specific fields of the adapter data space.
+ *
+ * Return:	0	o.k.
+ *		< 0	failure.
+ */
+int wpft1_init (sdla_t* card, wandev_conf_t* conf)
+{
+	unsigned char port_num;
+	int err;
+
+	union
+		{
+		char str[80];
+		} u;
+	volatile CHDLC_MAILBOX_STRUCT* mb;
+	CHDLC_MAILBOX_STRUCT* mb1;
+	unsigned long timeout;
+
+	/* Verify configuration ID */
+	if (conf->config_id != WANCONFIG_CHDLC) {
+		printk(KERN_INFO "%s: invalid configuration ID %u!\n",
+				  card->devname, conf->config_id);
+		return -EINVAL;
+	}
+
+	/* Use primary port */
+	card->u.c.comm_port = 0;
+	
+
+	/* Initialize protocol-specific fields */
+	if(card->hw.type != SDLA_S514){
+		card->mbox  = (void *) card->hw.dpmbase;
+	}else{ 
+		card->mbox = (void *) card->hw.dpmbase + PRI_BASE_ADDR_MB_STRUCT;
+	}
+
+	mb = mb1 = card->mbox;
+
+	if (!card->configured){
+
+		/* The board will place an 'I' in the return code to indicate that it is
+	   	ready to accept commands.  We expect this to be completed in less
+           	than 1 second. */
+
+		timeout = jiffies;
+		while (mb->return_code != 'I')	/* Wait 1s for board to initialize */
+			if ((jiffies - timeout) > 1*HZ) break;
+
+		if (mb->return_code != 'I') {
+			printk(KERN_INFO
+				"%s: Initialization not completed by adapter\n",
+				card->devname);
+			printk(KERN_INFO "Please contact Sangoma representative.\n");
+			return -EIO;
+		}
+	}
+
+	/* Read firmware version.  Note that when adapter initializes, it
+	 * clears the mailbox, so it may appear that the first command was
+	 * executed successfully when in fact it was merely erased. To work
+	 * around this, we execute the first command twice.
+	 */
+
+	if (chdlc_read_version(card, u.str))
+		return -EIO;
+
+	printk(KERN_INFO "%s: Running FT1 Configuration firmware v%s\n",
+		card->devname, u.str); 
+
+	card->isr			= NULL;
+	card->poll			= NULL;
+	card->exec			= &wpft1_exec;
+	card->wandev.update		= NULL;
+ 	card->wandev.new_if		= NULL;
+	card->wandev.del_if		= NULL;
+	card->wandev.state		= WAN_DUALPORT;
+	card->wandev.udp_port   	= conf->udp_port;
+
+	card->wandev.new_if_cnt = 0;
+
+	/* This is for the ports link state */
+	card->u.c.state = WAN_DISCONNECTED;
+	
+	/* reset the number of times the 'update()' proc has been called */
+	card->u.c.update_call_count = 0;
+	
+	card->wandev.ttl = 0x7F;
+	card->wandev.interface = 0; 
+
+	card->wandev.clocking = 0;
+
+	port_num = card->u.c.comm_port;
+
+	/* Setup Port Bps */
+
+       	card->wandev.bps = 0;
+
+	card->wandev.mtu = MIN_LGTH_CHDLC_DATA_CFG;
+
+	/* Set up the interrupt status area */
+	/* Read the CHDLC Configuration and obtain: 
+	 *	Ptr to shared memory infor struct
+         * Use this pointer to calculate the value of card->u.c.flags !
+ 	 */
+	mb1->buffer_length = 0;
+	mb1->command = READ_CHDLC_CONFIGURATION;
+	err = sdla_exec(mb1) ? mb1->return_code : CMD_TIMEOUT;
+	if(err != COMMAND_OK) {
+		chdlc_error(card, err, mb1);
+		return -EIO;
+	}
+
+	if(card->hw.type == SDLA_S514){
+               	card->u.c.flags = (void *)(card->hw.dpmbase +
+               		(((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
+			ptr_shared_mem_info_struct));
+        }else{
+                card->u.c.flags = (void *)(card->hw.dpmbase +
+                        (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
+			ptr_shared_mem_info_struct % SDLA_WINDOWSIZE));
+	}
+
+	card->wandev.state = WAN_FT1_READY;
+	printk(KERN_INFO "%s: FT1 Config Ready !\n",card->devname);
+
+	return 0;
+}
+
+static int wpft1_exec(sdla_t *card, void *u_cmd, void *u_data)
+{
+	CHDLC_MAILBOX_STRUCT* mbox = card->mbox;
+	int len;
+
+	if (copy_from_user((void*)&mbox->command, u_cmd, sizeof(ft1_exec_cmd_t))){
+		return -EFAULT;
+	}
+
+	len = mbox->buffer_length;
+
+	if (len) {
+		if( copy_from_user((void*)&mbox->data, u_data, len)){
+			return -EFAULT;
+		}
+	}
+
+	/* execute command */
+	if (!sdla_exec(mbox)){
+		return -EIO;
+	}
+
+	/* return result */
+	if( copy_to_user(u_cmd, (void*)&mbox->command, sizeof(ft1_exec_cmd_t))){
+		return -EFAULT;
+	}
+
+	len = mbox->buffer_length;
+
+	if (len && u_data && copy_to_user(u_data, (void*)&mbox->data, len)){
+		return -EFAULT;
+	}
+
+	return 0;
+
+}
+
+/*============================================================================
+ * Read firmware code version.
+ *	Put code version as ASCII string in str. 
+ */
+static int chdlc_read_version (sdla_t* card, char* str)
+{
+	CHDLC_MAILBOX_STRUCT* mb = card->mbox;
+	int len;
+	char err;
+	mb->buffer_length = 0;
+	mb->command = READ_CHDLC_CODE_VERSION;
+	err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
+
+	if(err != COMMAND_OK) {
+		chdlc_error(card,err,mb);
+	}
+	else if (str) {  /* is not null */
+		len = mb->buffer_length;
+		memcpy(str, mb->data, len);
+		str[len] = '\0';
+	}
+	return (err);
+}
+
+/*============================================================================
+ * Firmware error handler.
+ *	This routine is called whenever firmware command returns non-zero
+ *	return code.
+ *
+ * Return zero if previous command has to be cancelled.
+ */
+static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb)
+{
+	unsigned cmd = mb->command;
+
+	switch (err) {
+
+	case CMD_TIMEOUT:
+		printk(KERN_ERR "%s: command 0x%02X timed out!\n",
+			card->devname, cmd);
+		break;
+
+	case S514_BOTH_PORTS_SAME_CLK_MODE:
+		if(cmd == SET_CHDLC_CONFIGURATION) {
+			printk(KERN_INFO
+			 "%s: Configure both ports for the same clock source\n",
+				card->devname);
+			break;
+		}
+
+	default:
+		printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n",
+			card->devname, cmd, err);
+	}
+
+	return 0;
+}
+
+MODULE_LICENSE("GPL");