summaryrefslogtreecommitdiffstats
path: root/drivers/net/wan/z85230.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/wan/z85230.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/wan/z85230.h')
-rw-r--r--drivers/net/wan/z85230.h449
1 files changed, 449 insertions, 0 deletions
diff --git a/drivers/net/wan/z85230.h b/drivers/net/wan/z85230.h
new file mode 100644
index 00000000000..77e53208045
--- /dev/null
+++ b/drivers/net/wan/z85230.h
@@ -0,0 +1,449 @@
+/*
+ * Description of Z8530 Z85C30 and Z85230 communications chips
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 Alan Cox <alan@redhat.com>
+ */
+
+#ifndef _Z8530_H
+#define _Z8530_H
+
+#include <linux/tty.h>
+#include <linux/interrupt.h>
+
+/* Conversion routines to/from brg time constants from/to bits
+ * per second.
+ */
+#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
+#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
+
+/* The Zilog register set */
+
+#define FLAG 0x7e
+
+/* Write Register 0 */
+#define R0 0 /* Register selects */
+#define R1 1
+#define R2 2
+#define R3 3
+#define R4 4
+#define R5 5
+#define R6 6
+#define R7 7
+#define R8 8
+#define R9 9
+#define R10 10
+#define R11 11
+#define R12 12
+#define R13 13
+#define R14 14
+#define R15 15
+
+#define RPRIME 16 /* Indicate a prime register access on 230 */
+
+#define NULLCODE 0 /* Null Code */
+#define POINT_HIGH 0x8 /* Select upper half of registers */
+#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */
+#define SEND_ABORT 0x18 /* HDLC Abort */
+#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */
+#define RES_Tx_P 0x28 /* Reset TxINT Pending */
+#define ERR_RES 0x30 /* Error Reset */
+#define RES_H_IUS 0x38 /* Reset highest IUS */
+
+#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */
+#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */
+#define RES_EOM_L 0xC0 /* Reset EOM latch */
+
+/* Write Register 1 */
+
+#define EXT_INT_ENAB 0x1 /* Ext Int Enable */
+#define TxINT_ENAB 0x2 /* Tx Int Enable */
+#define PAR_SPEC 0x4 /* Parity is special condition */
+
+#define RxINT_DISAB 0 /* Rx Int Disable */
+#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */
+#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */
+#define INT_ERR_Rx 0x18 /* Int on error only */
+
+#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */
+#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */
+#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */
+
+/* Write Register #2 (Interrupt Vector) */
+
+/* Write Register 3 */
+
+#define RxENABLE 0x1 /* Rx Enable */
+#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */
+#define ADD_SM 0x4 /* Address Search Mode (SDLC) */
+#define RxCRC_ENAB 0x8 /* Rx CRC Enable */
+#define ENT_HM 0x10 /* Enter Hunt Mode */
+#define AUTO_ENAB 0x20 /* Auto Enables */
+#define Rx5 0x0 /* Rx 5 Bits/Character */
+#define Rx7 0x40 /* Rx 7 Bits/Character */
+#define Rx6 0x80 /* Rx 6 Bits/Character */
+#define Rx8 0xc0 /* Rx 8 Bits/Character */
+
+/* Write Register 4 */
+
+#define PAR_ENA 0x1 /* Parity Enable */
+#define PAR_EVEN 0x2 /* Parity Even/Odd* */
+
+#define SYNC_ENAB 0 /* Sync Modes Enable */
+#define SB1 0x4 /* 1 stop bit/char */
+#define SB15 0x8 /* 1.5 stop bits/char */
+#define SB2 0xc /* 2 stop bits/char */
+
+#define MONSYNC 0 /* 8 Bit Sync character */
+#define BISYNC 0x10 /* 16 bit sync character */
+#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */
+#define EXTSYNC 0x30 /* External Sync Mode */
+
+#define X1CLK 0x0 /* x1 clock mode */
+#define X16CLK 0x40 /* x16 clock mode */
+#define X32CLK 0x80 /* x32 clock mode */
+#define X64CLK 0xC0 /* x64 clock mode */
+
+/* Write Register 5 */
+
+#define TxCRC_ENAB 0x1 /* Tx CRC Enable */
+#define RTS 0x2 /* RTS */
+#define SDLC_CRC 0x4 /* SDLC/CRC-16 */
+#define TxENAB 0x8 /* Tx Enable */
+#define SND_BRK 0x10 /* Send Break */
+#define Tx5 0x0 /* Tx 5 bits (or less)/character */
+#define Tx7 0x20 /* Tx 7 bits/character */
+#define Tx6 0x40 /* Tx 6 bits/character */
+#define Tx8 0x60 /* Tx 8 bits/character */
+#define DTR 0x80 /* DTR */
+
+/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
+
+/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
+
+/* Write Register 8 (transmit buffer) */
+
+/* Write Register 9 (Master interrupt control) */
+#define VIS 1 /* Vector Includes Status */
+#define NV 2 /* No Vector */
+#define DLC 4 /* Disable Lower Chain */
+#define MIE 8 /* Master Interrupt Enable */
+#define STATHI 0x10 /* Status high */
+#define NORESET 0 /* No reset on write to R9 */
+#define CHRB 0x40 /* Reset channel B */
+#define CHRA 0x80 /* Reset channel A */
+#define FHWRES 0xc0 /* Force hardware reset */
+
+/* Write Register 10 (misc control bits) */
+#define BIT6 1 /* 6 bit/8bit sync */
+#define LOOPMODE 2 /* SDLC Loop mode */
+#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */
+#define MARKIDLE 8 /* Mark/flag on idle */
+#define GAOP 0x10 /* Go active on poll */
+#define NRZ 0 /* NRZ mode */
+#define NRZI 0x20 /* NRZI mode */
+#define FM1 0x40 /* FM1 (transition = 1) */
+#define FM0 0x60 /* FM0 (transition = 0) */
+#define CRCPS 0x80 /* CRC Preset I/O */
+
+/* Write Register 11 (Clock Mode control) */
+#define TRxCXT 0 /* TRxC = Xtal output */
+#define TRxCTC 1 /* TRxC = Transmit clock */
+#define TRxCBR 2 /* TRxC = BR Generator Output */
+#define TRxCDP 3 /* TRxC = DPLL output */
+#define TRxCOI 4 /* TRxC O/I */
+#define TCRTxCP 0 /* Transmit clock = RTxC pin */
+#define TCTRxCP 8 /* Transmit clock = TRxC pin */
+#define TCBR 0x10 /* Transmit clock = BR Generator output */
+#define TCDPLL 0x18 /* Transmit clock = DPLL output */
+#define RCRTxCP 0 /* Receive clock = RTxC pin */
+#define RCTRxCP 0x20 /* Receive clock = TRxC pin */
+#define RCBR 0x40 /* Receive clock = BR Generator output */
+#define RCDPLL 0x60 /* Receive clock = DPLL output */
+#define RTxCX 0x80 /* RTxC Xtal/No Xtal */
+
+/* Write Register 12 (lower byte of baud rate generator time constant) */
+
+/* Write Register 13 (upper byte of baud rate generator time constant) */
+
+/* Write Register 14 (Misc control bits) */
+#define BRENABL 1 /* Baud rate generator enable */
+#define BRSRC 2 /* Baud rate generator source */
+#define DTRREQ 4 /* DTR/Request function */
+#define AUTOECHO 8 /* Auto Echo */
+#define LOOPBAK 0x10 /* Local loopback */
+#define SEARCH 0x20 /* Enter search mode */
+#define RMC 0x40 /* Reset missing clock */
+#define DISDPLL 0x60 /* Disable DPLL */
+#define SSBR 0x80 /* Set DPLL source = BR generator */
+#define SSRTxC 0xa0 /* Set DPLL source = RTxC */
+#define SFMM 0xc0 /* Set FM mode */
+#define SNRZI 0xe0 /* Set NRZI mode */
+
+/* Write Register 15 (external/status interrupt control) */
+#define PRIME 1 /* R5' etc register access (Z85C30/230 only) */
+#define ZCIE 2 /* Zero count IE */
+#define FIFOE 4 /* Z85230 only */
+#define DCDIE 8 /* DCD IE */
+#define SYNCIE 0x10 /* Sync/hunt IE */
+#define CTSIE 0x20 /* CTS IE */
+#define TxUIE 0x40 /* Tx Underrun/EOM IE */
+#define BRKIE 0x80 /* Break/Abort IE */
+
+
+/* Read Register 0 */
+#define Rx_CH_AV 0x1 /* Rx Character Available */
+#define ZCOUNT 0x2 /* Zero count */
+#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */
+#define DCD 0x8 /* DCD */
+#define SYNC_HUNT 0x10 /* Sync/hunt */
+#define CTS 0x20 /* CTS */
+#define TxEOM 0x40 /* Tx underrun */
+#define BRK_ABRT 0x80 /* Break/Abort */
+
+/* Read Register 1 */
+#define ALL_SNT 0x1 /* All sent */
+/* Residue Data for 8 Rx bits/char programmed */
+#define RES3 0x8 /* 0/3 */
+#define RES4 0x4 /* 0/4 */
+#define RES5 0xc /* 0/5 */
+#define RES6 0x2 /* 0/6 */
+#define RES7 0xa /* 0/7 */
+#define RES8 0x6 /* 0/8 */
+#define RES18 0xe /* 1/8 */
+#define RES28 0x0 /* 2/8 */
+/* Special Rx Condition Interrupts */
+#define PAR_ERR 0x10 /* Parity error */
+#define Rx_OVR 0x20 /* Rx Overrun Error */
+#define CRC_ERR 0x40 /* CRC/Framing Error */
+#define END_FR 0x80 /* End of Frame (SDLC) */
+
+/* Read Register 2 (channel b only) - Interrupt vector */
+
+/* Read Register 3 (interrupt pending register) ch a only */
+#define CHBEXT 0x1 /* Channel B Ext/Stat IP */
+#define CHBTxIP 0x2 /* Channel B Tx IP */
+#define CHBRxIP 0x4 /* Channel B Rx IP */
+#define CHAEXT 0x8 /* Channel A Ext/Stat IP */
+#define CHATxIP 0x10 /* Channel A Tx IP */
+#define CHARxIP 0x20 /* Channel A Rx IP */
+
+/* Read Register 8 (receive data register) */
+
+/* Read Register 10 (misc status bits) */
+#define ONLOOP 2 /* On loop */
+#define LOOPSEND 0x10 /* Loop sending */
+#define CLK2MIS 0x40 /* Two clocks missing */
+#define CLK1MIS 0x80 /* One clock missing */
+
+/* Read Register 12 (lower byte of baud rate generator constant) */
+
+/* Read Register 13 (upper byte of baud rate generator constant) */
+
+/* Read Register 15 (value of WR 15) */
+
+
+/*
+ * Interrupt handling functions for this SCC
+ */
+
+struct z8530_channel;
+
+struct z8530_irqhandler
+{
+ void (*rx)(struct z8530_channel *);
+ void (*tx)(struct z8530_channel *);
+ void (*status)(struct z8530_channel *);
+};
+
+/*
+ * A channel of the Z8530
+ */
+
+struct z8530_channel
+{
+ struct z8530_irqhandler *irqs; /* IRQ handlers */
+ /*
+ * Synchronous
+ */
+ u16 count; /* Buyes received */
+ u16 max; /* Most we can receive this frame */
+ u16 mtu; /* MTU of the device */
+ u8 *dptr; /* Pointer into rx buffer */
+ struct sk_buff *skb; /* Buffer dptr points into */
+ struct sk_buff *skb2; /* Pending buffer */
+ u8 status; /* Current DCD */
+ u8 dcdcheck; /* which bit to check for line */
+ u8 sync; /* Set if in sync mode */
+
+ u8 regs[32]; /* Register map for the chip */
+ u8 pendregs[32]; /* Pending register values */
+
+ struct sk_buff *tx_skb; /* Buffer being transmitted */
+ struct sk_buff *tx_next_skb; /* Next transmit buffer */
+ u8 *tx_ptr; /* Byte pointer into the buffer */
+ u8 *tx_next_ptr; /* Next pointer to use */
+ u8 *tx_dma_buf[2]; /* TX flip buffers for DMA */
+ u8 tx_dma_used; /* Flip buffer usage toggler */
+ u16 txcount; /* Count of bytes to transmit */
+
+ void (*rx_function)(struct z8530_channel *, struct sk_buff *);
+
+ /*
+ * Sync DMA
+ */
+
+ u8 rxdma; /* DMA channels */
+ u8 txdma;
+ u8 rxdma_on; /* DMA active if flag set */
+ u8 txdma_on;
+ u8 dma_num; /* Buffer we are DMAing into */
+ u8 dma_ready; /* Is the other buffer free */
+ u8 dma_tx; /* TX is to use DMA */
+ u8 *rx_buf[2]; /* The flip buffers */
+
+ /*
+ * System
+ */
+
+ struct z8530_dev *dev; /* Z85230 chip instance we are from */
+ unsigned long ctrlio; /* I/O ports */
+ unsigned long dataio;
+
+ /*
+ * For PC we encode this way.
+ */
+#define Z8530_PORT_SLEEP 0x80000000
+#define Z8530_PORT_OF(x) ((x)&0xFFFF)
+
+ u32 rx_overrun; /* Overruns - not done yet */
+ u32 rx_crc_err;
+
+ /*
+ * Bound device pointers
+ */
+
+ void *private; /* For our owner */
+ struct net_device *netdevice; /* Network layer device */
+ struct net_device_stats stats; /* Network layer statistics */
+
+ /*
+ * Async features
+ */
+
+ struct tty_struct *tty; /* Attached terminal */
+ int line; /* Minor number */
+ wait_queue_head_t open_wait; /* Tasks waiting to open */
+ wait_queue_head_t close_wait; /* and for close to end */
+ unsigned long event; /* Pending events */
+ int fdcount; /* # of fd on device */
+ int blocked_open; /* # of blocked opens */
+ int x_char; /* XON/XOF char */
+ unsigned char *xmit_buf; /* Transmit pointer */
+ int xmit_head; /* Transmit ring */
+ int xmit_tail;
+ int xmit_cnt;
+ int flags;
+ int timeout;
+ int xmit_fifo_size; /* Transmit FIFO info */
+
+ int close_delay; /* Do we wait for drain on close ? */
+ unsigned short closing_wait;
+
+ /* We need to know the current clock divisor
+ * to read the bps rate the chip has currently
+ * loaded.
+ */
+
+ unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */
+ int zs_baud;
+
+ int magic;
+ int baud_base; /* Baud parameters */
+ int custom_divisor;
+
+
+ unsigned char tx_active; /* character is being xmitted */
+ unsigned char tx_stopped; /* output is suspended */
+
+ spinlock_t *lock; /* Devicr lock */
+};
+
+/*
+ * Each Z853x0 device.
+ */
+
+struct z8530_dev
+{
+ char *name; /* Device instance name */
+ struct z8530_channel chanA; /* SCC channel A */
+ struct z8530_channel chanB; /* SCC channel B */
+ int type;
+#define Z8530 0 /* NMOS dinosaur */
+#define Z85C30 1 /* CMOS - better */
+#define Z85230 2 /* CMOS with real FIFO */
+ int irq; /* Interrupt for the device */
+ int active; /* Soft interrupt enable - the Mac doesn't
+ always have a hard disable on its 8530s... */
+ spinlock_t lock;
+};
+
+
+/*
+ * Functions
+ */
+
+extern u8 z8530_dead_port[];
+extern u8 z8530_hdlc_kilostream_85230[];
+extern u8 z8530_hdlc_kilostream[];
+extern irqreturn_t z8530_interrupt(int, void *, struct pt_regs *);
+extern void z8530_describe(struct z8530_dev *, char *mapping, unsigned long io);
+extern int z8530_init(struct z8530_dev *);
+extern int z8530_shutdown(struct z8530_dev *);
+extern int z8530_sync_open(struct net_device *, struct z8530_channel *);
+extern int z8530_sync_close(struct net_device *, struct z8530_channel *);
+extern int z8530_sync_dma_open(struct net_device *, struct z8530_channel *);
+extern int z8530_sync_dma_close(struct net_device *, struct z8530_channel *);
+extern int z8530_sync_txdma_open(struct net_device *, struct z8530_channel *);
+extern int z8530_sync_txdma_close(struct net_device *, struct z8530_channel *);
+extern int z8530_channel_load(struct z8530_channel *, u8 *);
+extern int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb);
+extern struct net_device_stats *z8530_get_stats(struct z8530_channel *c);
+extern void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb);
+
+
+/*
+ * Standard interrupt vector sets
+ */
+
+extern struct z8530_irqhandler z8530_sync, z8530_async, z8530_nop;
+
+/*
+ * Asynchronous Interfacing
+ */
+
+#define SERIAL_MAGIC 0x5301
+
+/*
+ * The size of the serial xmit buffer is 1 page, or 4096 bytes
+ */
+
+#define SERIAL_XMIT_SIZE 4096
+#define WAKEUP_CHARS 256
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at rs interrupt time.
+ */
+#define RS_EVENT_WRITE_WAKEUP 0
+
+/* Internal flags used only by kernel/chr_drv/serial.c */
+#define ZILOG_INITIALIZED 0x80000000 /* Serial port was initialized */
+#define ZILOG_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */
+#define ZILOG_NORMAL_ACTIVE 0x20000000 /* Normal device is active */
+#define ZILOG_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */
+#define ZILOG_CLOSING 0x08000000 /* Serial port is closing */
+#define ZILOG_CTS_FLOW 0x04000000 /* Do CTS flow control */
+#define ZILOG_CHECK_CD 0x02000000 /* i.e., CLOCAL */
+
+#endif /* !(_Z8530_H) */