Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

7 files changed, 16 insertions, 16 deletions

diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 10bafd59f9c..6fb6f8e667d 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -329,7 +329,7 @@ static int startmicrocode(struct cosa_data *cosa, int address);
 static int readmem(struct cosa_data *cosa, char __user *data, int addr, int len);
 static int cosa_reset_and_read_id(struct cosa_data *cosa, char *id);
 
-/* Auxilliary functions */
+/* Auxiliary functions */
 static int get_wait_data(struct cosa_data *cosa);
 static int put_wait_data(struct cosa_data *cosa, int data);
 static int puthexnumber(struct cosa_data *cosa, int number);
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 4578e5b4b41..acb9ea83062 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -56,7 +56,7 @@
  * IV. Notes
  * The current error (XDU, RFO) recovery code is untested.
  * So far, RDO takes his RX channel down and the right sequence to enable it
- * again is still a mistery. If RDO happens, plan a reboot. More details
+ * again is still a mystery. If RDO happens, plan a reboot. More details
  * in the code (NB: as this happens, TX still works).
  * Don't mess the cables during operation, especially on DTE ports. I don't
  * suggest it for DCE either but at least one can get some messages instead
@@ -1065,7 +1065,7 @@ static int dscc4_open(struct net_device *dev)
 
 	/*
 	 * Due to various bugs, there is no way to reliably reset a
-	 * specific port (manufacturer's dependant special PCI #RST wiring
+	 * specific port (manufacturer's dependent special PCI #RST wiring
 	 * apart: it affects all ports). Thus the device goes in the best
 	 * silent mode possible at dscc4_close() time and simply claims to
 	 * be up if it's opened again. It still isn't possible to change
@@ -1230,9 +1230,9 @@ static inline int dscc4_check_clock_ability(int port)
  *   scaling. Of course some rounding may take place.
  * - no high speed mode (40Mb/s). May be trivial to do but I don't have an
  *   appropriate external clocking device for testing.
- * - no time-slot/clock mode 5: shameless lazyness.
+ * - no time-slot/clock mode 5: shameless laziness.
  *
- * The clock signals wiring can be (is ?) manufacturer dependant. Good luck.
+ * The clock signals wiring can be (is ?) manufacturer dependent. Good luck.
  *
  * BIG FAT WARNING: if the device isn't provided enough clocking signal, it
  * won't pass the init sequence. For example, straight back-to-back DTE without
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index 48edc5f4dac..e817583e6ec 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -15,7 +15,7 @@
  *	The hardware does the bus handling to avoid the need for delays between
  *	touching control registers.
  *
- *	Port B isnt wired (why - beats me)
+ *	Port B isn't wired (why - beats me)
  *
  *	Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
  */
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 6c571e19883..f1e1643dc3e 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -178,7 +178,7 @@
  *
  * The resulting average clock frequency (assuming 33.333 MHz oscillator) is:
  * freq = 66.666 MHz / (A + (B + 1) / (C + 1))
- * minumum freq = 66.666 MHz / (A + 1)
+ * minimum freq = 66.666 MHz / (A + 1)
  * maximum freq = 66.666 MHz / A
  *
  * Example: A = 2, B = 2, C = 7, CLOCK_CR register = 2 << 22 | 2 << 12 | 7
@@ -230,7 +230,7 @@
 #define PKT_PIPE_MODE_WRITE		0x57
 
 /* HDLC packet status values - desc->status */
-#define ERR_SHUTDOWN		1 /* stop or shutdown occurrance */
+#define ERR_SHUTDOWN		1 /* stop or shutdown occurrence */
 #define ERR_HDLC_ALIGN		2 /* HDLC alignment error */
 #define ERR_HDLC_FCS		3 /* HDLC Frame Check Sum error */
 #define ERR_RXFREE_Q_EMPTY	4 /* RX-free queue became empty while receiving
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 70feb84df67..b7f2358d23b 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -24,7 +24,7 @@
   *
   * Linux driver notes:
   * Linux uses the device struct lmc_private to pass private information
-  * arround.
+  * around.
   *
   * The initialization portion of this driver (the lmc_reset() and the
   * lmc_dec_reset() functions, as well as the led controls and the
diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h
index 65d01978e78..01ad45218d1 100644
--- a/drivers/net/wan/lmc/lmc_var.h
+++ b/drivers/net/wan/lmc/lmc_var.h
@@ -180,7 +180,7 @@ struct lmc___ctl {
 
 
 /*
- * Carefull, look at the data sheet, there's more to this
+ * Careful, look at the data sheet, there's more to this
  * structure than meets the eye.  It should probably be:
  *
  * struct tulip_desc_t {
@@ -380,7 +380,7 @@ struct lmc___softc {
 /* CSR6 settings */
 #define OPERATION_MODE  0x00000200 /* Full Duplex      */
 #define PROMISC_MODE    0x00000040 /* Promiscuous Mode */
-#define RECIEVE_ALL     0x40000000 /* Recieve All      */
+#define RECIEVE_ALL     0x40000000 /* Receive All      */
 #define PASS_BAD_FRAMES 0x00000008 /* Pass Bad Frames  */
 
 /* Dec control registers  CSR6 as well */
@@ -398,7 +398,7 @@ struct lmc___softc {
 #define TULIP_CMD_RECEIVEALL    0x40000000L /* (RW)  Receivel all frames? */
 #define TULIP_CMD_MUSTBEONE     0x02000000L /* (RW)  Must Be One (21140) */
 #define TULIP_CMD_TXTHRSHLDCTL  0x00400000L /* (RW)  Transmit Threshold Mode (21140) */
-#define TULIP_CMD_STOREFWD      0x00200000L /* (RW)  Store and Foward (21140) */
+#define TULIP_CMD_STOREFWD      0x00200000L /* (RW)  Store and Forward (21140) */
 #define TULIP_CMD_NOHEARTBEAT   0x00080000L /* (RW)  No Heartbeat (21140) */
 #define TULIP_CMD_PORTSELECT    0x00040000L /* (RW)  Post Select (100Mb) (21140) */
 #define TULIP_CMD_FULLDUPLEX    0x00000200L /* (RW)  Full Duplex Mode */
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 93956861ea2..0806232e0f8 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -542,7 +542,7 @@ static void z8530_dma_tx(struct z8530_channel *chan)
 		z8530_tx(chan);
 		return;
 	}
-	/* This shouldnt occur in DMA mode */
+	/* This shouldn't occur in DMA mode */
 	printk(KERN_ERR "DMA tx - bogus event!\n");
 	z8530_tx(chan);
 }
@@ -1219,7 +1219,7 @@ static const char *z8530_type_name[]={
  *	@io: the port value in question
  *
  *	Describe a Z8530 in a standard format. We must pass the I/O as
- *	the port offset isnt predictable. The main reason for this function
+ *	the port offset isn't predictable. The main reason for this function
  *	is to try and get a common format of report.
  */
 
@@ -1588,7 +1588,7 @@ static void z8530_rx_done(struct z8530_channel *c)
 		unsigned long flags;
 		
 		/*
-		 *	Complete this DMA. Neccessary to find the length
+		 *	Complete this DMA. Necessary to find the length
 		 */		
 		 
 		flags=claim_dma_lock();
@@ -1657,7 +1657,7 @@ static void z8530_rx_done(struct z8530_channel *c)
 		 *	fifo length for this. Thus we want to flip to the new
 		 *	buffer and then mess around copying and allocating
 		 *	things. For the current case it doesn't matter but
-		 *	if you build a system where the sync irq isnt blocked
+		 *	if you build a system where the sync irq isn't blocked
 		 *	by the kernel IRQ disable then you need only block the
 		 *	sync IRQ for the RT_LOCK area.
 		 *