diff options
| author | John W. Linville <linville@tuxdriver.com> | 2012-07-10 16:27:28 -0400 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2012-07-11 15:40:22 -0400 |
| commit | 5da7b2e05ec17d8a90ea1f463d3b7d46975ceef2 (patch) | |
| tree | 07b65448a598def4b34ca59256835b875d932479 /drivers/net/wimax/i2400m/i2400m.h | |
| parent | 650cef38263c0f4c8970265354432be154eef425 (diff) | |
i2400m: remove SDIO device support
SDIO support in this driver was intended to support the iwmc3200
device. This hardware never became available to normal humans.
Leaving this driver imposes unwelcome maintenance costs for no clear
benefit.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Diffstat (limited to 'drivers/net/wimax/i2400m/i2400m.h')
| -rw-r--r-- | drivers/net/wimax/i2400m/i2400m.h | 13 |
1 files changed, 6 insertions, 7 deletions
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index c806d455021..79c6505b5c2 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -46,7 +46,7 @@ * - bus generic driver (this part) * * The bus specific driver sets up stuff specific to the bus the - * device is connected to (USB, SDIO, PCI, tam-tam...non-authoritative + * device is connected to (USB, PCI, tam-tam...non-authoritative * nor binding list) which is basically the device-model management * (probe/disconnect, etc), moving data from device to kernel and * back, doing the power saving details and reseting the device. @@ -238,14 +238,13 @@ struct i2400m_barker_db; * amount needed for loading firmware, where us dev_start/stop setup * the rest needed to do full data/control traffic. * - * @bus_tx_block_size: [fill] SDIO imposes a 256 block size, USB 16, - * so we have a tx_blk_size variable that the bus layer sets to - * tell the engine how much of that we need. + * @bus_tx_block_size: [fill] USB imposes a 16 block size, but other + * busses will differ. So we have a tx_blk_size variable that the + * bus layer sets to tell the engine how much of that we need. * * @bus_tx_room_min: [fill] Minimum room required while allocating - * TX queue's buffer space for message header. SDIO requires - * 224 bytes and USB 16 bytes. Refer bus specific driver code - * for details. + * TX queue's buffer space for message header. USB requires + * 16 bytes. Refer to bus specific driver code for details. * * @bus_pl_size_max: [fill] Maximum payload size. * |