wimax/i2400m/sdio: Move all the RX code to a unified, IRQ based receive routine

The current SDIO code was working in polling mode for boot-mode
(firmware load) mode. This was causing issues on some hardware.

Moved all the RX code to use a unified IRQ handler that based on the
type of data the device is sending can discriminate and decide which
is the right destination.

As well, all the reads from the device are made to be at least the
block size (256); the driver will ignore the rest when not needed.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>

1 files changed, 36 insertions, 11 deletions

diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c
index a3008b904f7..321beadf6e4 100644
--- a/drivers/net/wimax/i2400m/sdio-rx.c
+++ b/drivers/net/wimax/i2400m/sdio-rx.c
@@ -69,6 +69,13 @@
 #define D_SUBMODULE rx
 #include "sdio-debug-levels.h"
 
+static const __le32 i2400m_ACK_BARKER[4] = {
+	__constant_cpu_to_le32(I2400M_ACK_BARKER),
+	__constant_cpu_to_le32(I2400M_ACK_BARKER),
+	__constant_cpu_to_le32(I2400M_ACK_BARKER),
+	__constant_cpu_to_le32(I2400M_ACK_BARKER)
+};
+
 
 /*
  * Read and return the amount of bytes available for RX
@@ -131,25 +138,35 @@ void i2400ms_rx(struct i2400ms *i2400ms)
 		ret = rx_size;
 		goto error_get_size;
 	}
+
 	ret = -ENOMEM;
 	skb = alloc_skb(rx_size, GFP_ATOMIC);
 	if (NULL == skb) {
 		dev_err(dev, "RX: unable to alloc skb\n");
 		goto error_alloc_skb;
 	}
-
 	ret = sdio_memcpy_fromio(func, skb->data,
 				 I2400MS_DATA_ADDR, rx_size);
 	if (ret < 0) {
 		dev_err(dev, "RX: SDIO data read failed: %d\n", ret);
 		goto error_memcpy_fromio;
 	}
-	/* Check if device has reset */
-	if (!memcmp(skb->data, i2400m_NBOOT_BARKER,
-		    sizeof(i2400m_NBOOT_BARKER))
-	    || !memcmp(skb->data, i2400m_SBOOT_BARKER,
-		       sizeof(i2400m_SBOOT_BARKER))) {
+
+	rmb();	/* make sure we get boot_mode from dev_reset_handle */
+	if (i2400m->boot_mode == 1) {
+		spin_lock(&i2400m->rx_lock);
+		i2400ms->bm_ack_size = rx_size;
+		spin_unlock(&i2400m->rx_lock);
+		memcpy(i2400m->bm_ack_buf, skb->data, rx_size);
+		wake_up(&i2400ms->bm_wfa_wq);
+		dev_err(dev, "RX: SDIO boot mode message\n");
+		kfree_skb(skb);
+	} else if (unlikely(!memcmp(skb->data, i2400m_NBOOT_BARKER,
+				    sizeof(i2400m_NBOOT_BARKER))
+			    || !memcmp(skb->data, i2400m_SBOOT_BARKER,
+				       sizeof(i2400m_SBOOT_BARKER)))) {
 		ret = i2400m_dev_reset_handle(i2400m);
+		dev_err(dev, "RX: SDIO reboot barker\n");
 		kfree_skb(skb);
 	} else {
 		skb_put(skb, rx_size);
@@ -179,7 +196,6 @@ void i2400ms_irq(struct sdio_func *func)
 {
 	int ret;
 	struct i2400ms *i2400ms = sdio_get_drvdata(func);
-	struct i2400m *i2400m = &i2400ms->i2400m;
 	struct device *dev = &func->dev;
 	int val;
 
@@ -194,10 +210,7 @@ void i2400ms_irq(struct sdio_func *func)
 		goto error_no_irq;
 	}
 	sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret);
-	if (WARN_ON(i2400m->boot_mode != 0))
-		dev_err(dev, "RX: SW BUG? boot mode and IRQ is up?\n");
-	else
-		i2400ms_rx(i2400ms);
+	i2400ms_rx(i2400ms);
 error_no_irq:
 	d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms);
 	return;
@@ -214,8 +227,15 @@ int i2400ms_rx_setup(struct i2400ms *i2400ms)
 	int result;
 	struct sdio_func *func = i2400ms->func;
 	struct device *dev = &func->dev;
+	struct i2400m *i2400m = &i2400ms->i2400m;
 
 	d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
+
+	init_waitqueue_head(&i2400ms->bm_wfa_wq);
+	spin_lock(&i2400m->rx_lock);
+	i2400ms->bm_wait_result = -EINPROGRESS;
+	spin_unlock(&i2400m->rx_lock);
+
 	sdio_claim_host(func);
 	result = sdio_claim_irq(func, i2400ms_irq);
 	if (result < 0) {
@@ -245,8 +265,13 @@ void i2400ms_rx_release(struct i2400ms *i2400ms)
 	int result;
 	struct sdio_func *func = i2400ms->func;
 	struct device *dev = &func->dev;
+	struct i2400m *i2400m = &i2400ms->i2400m;
 
 	d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
+	spin_lock(&i2400m->rx_lock);
+	i2400ms->bm_ack_size = -EINTR;
+	spin_unlock(&i2400m->rx_lock);
+	wake_up_all(&i2400ms->bm_wfa_wq);
 	sdio_claim_host(func);
 	sdio_writeb(func, 0, I2400MS_INTR_ENABLE_ADDR, &result);
 	sdio_release_irq(func);