wimax/i2400m: rework bootrom initialization to be more flexible

This modifies the bootrom initialization code of the i2400m driver so
it can more easily support upcoming hardware.

Currently, the code detects two types of barkers (magic numbers) sent
by the device to indicate the types of firmware it would take (signed
vs non-signed).

This schema is extended so that multiple reboot barkers are
recognized; upcoming hw will expose more types barkers which will have
to match a header in the firmware image before we can load it.

For that, a barker database is introduced; the first time the device
sends a barker, it is matched in the database. That gives the driver
the information needed to decide how to upload the firmware and which
types of firmware to use. The database can be populated from module
parameters.

The execution flow is not altered; a new function
(i2400m_is_boot_barker) is introduced to determine in the RX path if
the device has sent a boot barker. This function is becoming heavier,
so it is put away from the hot reception path [this is why there is
some reorganization in sdio-rx.c:i2400ms_rx and
usb-notifc.c:i2400mu_notification_grok()].

The documentation on the process has also been updated.

All these modifications are heavily based on previous work by Dirk
Brandewie <dirk.brandewie@intel.com>.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>

1 files changed, 18 insertions, 7 deletions

diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c
index 1c9046914bd..87263be4eed 100644
--- a/drivers/net/wimax/i2400m/sdio-rx.c
+++ b/drivers/net/wimax/i2400m/sdio-rx.c
@@ -53,6 +53,7 @@
  * i2400ms_irq()
  *   i2400ms_rx()
  *     __i2400ms_rx_get_size()
+ *     i2400m_is_boot_barker()
  *     i2400m_rx()
  *
  * i2400ms_rx_setup()
@@ -158,7 +159,7 @@ void i2400ms_rx(struct i2400ms *i2400ms)
 	}
 
 	rmb();	/* make sure we get boot_mode from dev_reset_handle */
-	if (i2400m->boot_mode == 1) {
+	if (unlikely(i2400m->boot_mode == 1)) {
 		spin_lock(&i2400m->rx_lock);
 		i2400ms->bm_ack_size = rx_size;
 		spin_unlock(&i2400m->rx_lock);
@@ -166,17 +167,26 @@ void i2400ms_rx(struct i2400ms *i2400ms)
 		wake_up(&i2400ms->bm_wfa_wq);
 		dev_err(dev, "RX: SDIO boot mode message\n");
 		kfree_skb(skb);
-	} else if (unlikely(!memcmp(skb->data, i2400m_NBOOT_BARKER,
-				    sizeof(i2400m_NBOOT_BARKER))
-			    || !memcmp(skb->data, i2400m_SBOOT_BARKER,
-				       sizeof(i2400m_SBOOT_BARKER)))) {
+		goto out;
+	}
+	ret = -EIO;
+	if (unlikely(rx_size < sizeof(__le32))) {
+		dev_err(dev, "HW BUG? only %zu bytes received\n", rx_size);
+		goto error_bad_size;
+	}
+	if (likely(i2400m_is_d2h_barker(skb->data))) {
+		skb_put(skb, rx_size);
+		i2400m_rx(i2400m, skb);
+	} else if (unlikely(i2400m_is_boot_barker(i2400m,
+						  skb->data, rx_size))) {
 		ret = i2400m_dev_reset_handle(i2400m);
 		dev_err(dev, "RX: SDIO reboot barker\n");
 		kfree_skb(skb);
 	} else {
-		skb_put(skb, rx_size);
-		i2400m_rx(i2400m, skb);
+		i2400m_unknown_barker(i2400m, skb->data, rx_size);
+		kfree_skb(skb);
 	}
+out:
 	d_fnend(7, dev, "(i2400ms %p) = void\n", i2400ms);
 	return;
 
@@ -184,6 +194,7 @@ error_memcpy_fromio:
 	kfree_skb(skb);
 error_alloc_skb:
 error_get_size:
+error_bad_size:
 	d_fnend(7, dev, "(i2400ms %p) = %d\n", i2400ms, ret);
 	return;
 }