summaryrefslogtreecommitdiffstats
path: root/drivers/net/wimax/i2400m/sdio.c
diff options
context:
space:
mode:
authorInaky Perez-Gonzalez <inaky@linux.intel.com>2009-09-16 18:23:27 -0700
committerInaky Perez-Gonzalez <inaky@linux.intel.com>2009-10-19 15:56:08 +0900
commit0856ccf29dfbaf957e4be80dd3eb88d97810b633 (patch)
treea33cf96b010ce3814747b67eb60743554af2070f /drivers/net/wimax/i2400m/sdio.c
parentc2315b4ea9ac9c3f8caf03c3511d86fabe4a5fcd (diff)
wimax/i2400m: introduce i2400m->bus_setup/release
The SDIO subdriver of the i2400m requires certain steps to be done before we do any acces to the device, even for doing firmware upload. This lead to a few ugly hacks, which basically involve doing those steps in probe() before calling i2400m_setup() and undoing them in disconnect() after claling i2400m_release(); but then, much of those steps have to be repeated when resetting the device, suspending, etc (in upcoming pre/post reset support). Thus, a new pair of optional, bus-specific calls i2400m->bus_{setup/release} are introduced. These are used to setup basic infrastructure needed to load firmware onto the device. This commit also updates the SDIO subdriver to use said calls. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Diffstat (limited to 'drivers/net/wimax/i2400m/sdio.c')
-rw-r--r--drivers/net/wimax/i2400m/sdio.c100
1 files changed, 64 insertions, 36 deletions
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index de158ee0c32..6e39665ecd8 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -165,6 +165,66 @@ function_enabled:
/*
+ * Setup minimal device communication infrastructure needed to at
+ * least be able to update the firmware.
+ */
+static
+int i2400ms_bus_setup(struct i2400m *i2400m)
+{
+ int result;
+ struct i2400ms *i2400ms =
+ container_of(i2400m, struct i2400ms, i2400m);
+ struct device *dev = i2400m_dev(i2400m);
+ struct sdio_func *func = i2400ms->func;
+
+ sdio_claim_host(func);
+ result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
+ sdio_release_host(func);
+ if (result < 0) {
+ dev_err(dev, "Failed to set block size: %d\n", result);
+ goto error_set_blk_size;
+ }
+
+ result = i2400ms_enable_function(func, 1);
+ if (result < 0) {
+ dev_err(dev, "Cannot enable SDIO function: %d\n", result);
+ goto error_func_enable;
+ }
+
+ result = i2400ms_rx_setup(i2400ms);
+ if (result < 0)
+ goto error_rx_setup;
+ return 0;
+
+error_rx_setup:
+ sdio_claim_host(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+error_func_enable:
+error_set_blk_size:
+ return result;
+}
+
+
+/*
+ * Tear down minimal device communication infrastructure needed to at
+ * least be able to update the firmware.
+ */
+static
+void i2400ms_bus_release(struct i2400m *i2400m)
+{
+ struct i2400ms *i2400ms =
+ container_of(i2400m, struct i2400ms, i2400m);
+ struct sdio_func *func = i2400ms->func;
+
+ i2400ms_rx_release(i2400ms);
+ sdio_claim_host(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+}
+
+
+/*
* Setup driver resources needed to communicate with the device
*
* The fw needs some time to settle, and it was just uploaded,
@@ -315,17 +375,12 @@ do_bus_reset:
if (i2400m->wimax_dev.net_dev->reg_state == NETREG_REGISTERED)
netif_tx_disable(i2400m->wimax_dev.net_dev);
- i2400ms_rx_release(i2400ms);
- sdio_claim_host(i2400ms->func);
- sdio_disable_func(i2400ms->func);
- sdio_release_host(i2400ms->func);
+ i2400ms_bus_release(i2400m);
/* Wait for the device to settle */
msleep(40);
- result = i2400ms_enable_function(i2400ms->func, 0);
- if (result >= 0)
- i2400ms_rx_setup(i2400ms);
+ result = i2400ms_bus_setup(i2400m);
} else
BUG();
if (result < 0 && rt != I2400M_RT_BUS) {
@@ -449,8 +504,10 @@ int i2400ms_probe(struct sdio_func *func,
i2400m->bus_tx_block_size = I2400MS_BLK_SIZE;
i2400m->bus_pl_size_max = I2400MS_PL_SIZE_MAX;
+ i2400m->bus_setup = i2400ms_bus_setup;
i2400m->bus_dev_start = i2400ms_bus_dev_start;
i2400m->bus_dev_stop = i2400ms_bus_dev_stop;
+ i2400m->bus_release = i2400ms_bus_release;
i2400m->bus_tx_kick = i2400ms_bus_tx_kick;
i2400m->bus_reset = i2400ms_bus_reset;
/* The iwmc3200-wimax sometimes requires the driver to try
@@ -462,20 +519,6 @@ int i2400ms_probe(struct sdio_func *func,
i2400m->bus_bm_mac_addr_impaired = 1;
i2400m->bus_bm_pokes_table = &i2400ms_pokes[0];
- sdio_claim_host(func);
- result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
- sdio_release_host(func);
- if (result < 0) {
- dev_err(dev, "Failed to set block size: %d\n", result);
- goto error_set_blk_size;
- }
-
- result = i2400ms_enable_function(i2400ms->func, 1);
- if (result < 0) {
- dev_err(dev, "Cannot enable SDIO function: %d\n", result);
- goto error_func_enable;
- }
-
/*
* Before we are enabling the device interrupt register, make
* sure the buffer used during bootmode operation is setup so
@@ -488,10 +531,6 @@ int i2400ms_probe(struct sdio_func *func,
goto error_bootmode_buf_setup;
}
- result = i2400ms_rx_setup(i2400ms);
- if (result < 0)
- goto error_rx_setup;
-
result = i2400m_setup(i2400m, I2400M_BRI_NO_REBOOT);
if (result < 0) {
dev_err(dev, "cannot setup device: %d\n", result);
@@ -509,15 +548,8 @@ int i2400ms_probe(struct sdio_func *func,
error_debugfs_add:
i2400m_release(i2400m);
error_setup:
- i2400ms_rx_release(i2400ms);
-error_rx_setup:
i2400m_bm_buf_free(i2400m);
error_bootmode_buf_setup:
- sdio_claim_host(func);
- sdio_disable_func(func);
- sdio_release_host(func);
-error_func_enable:
-error_set_blk_size:
sdio_set_drvdata(func, NULL);
free_netdev(net_dev);
error_alloc_netdev:
@@ -535,12 +567,8 @@ void i2400ms_remove(struct sdio_func *func)
d_fnstart(3, dev, "SDIO func %p\n", func);
debugfs_remove_recursive(i2400ms->debugfs_dentry);
- i2400ms_rx_release(i2400ms);
i2400m_release(i2400m);
sdio_set_drvdata(func, NULL);
- sdio_claim_host(func);
- sdio_disable_func(func);
- sdio_release_host(func);
free_netdev(net_dev);
d_fnend(3, dev, "SDIO func %p\n", func);
}