i2400m: Makefile and Kconfig

Integrate the i2400m driver into the kernel's build and Kconfig.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

4 files changed, 100 insertions, 0 deletions

diff --git a/drivers/net/wimax/Kconfig b/drivers/net/wimax/Kconfig
new file mode 100644
index 00000000000..565018ec1e3
--- /dev/null
+++ b/drivers/net/wimax/Kconfig
@@ -0,0 +1,17 @@
+#
+# WiMAX LAN device drivers configuration
+#
+
+
+comment "Enable WiMAX (Networking options) to see the WiMAX drivers"
+	depends on WIMAX = n
+
+if WIMAX
+
+menu "WiMAX Wireless Broadband devices"
+
+source "drivers/net/wimax/i2400m/Kconfig"
+
+endmenu
+
+endif
diff --git a/drivers/net/wimax/Makefile b/drivers/net/wimax/Makefile
new file mode 100644
index 00000000000..992bc02bc01
--- /dev/null
+++ b/drivers/net/wimax/Makefile
@@ -0,0 +1,5 @@
+
+obj-$(CONFIG_WIMAX_I2400M)	+= i2400m/
+
+# (from Sam Ravnborg) force kbuild to create built-in.o
+obj- := dummy.o
diff --git a/drivers/net/wimax/i2400m/Kconfig b/drivers/net/wimax/i2400m/Kconfig
new file mode 100644
index 00000000000..d623b3d99a4
--- /dev/null
+++ b/drivers/net/wimax/i2400m/Kconfig
@@ -0,0 +1,49 @@
+
+config WIMAX_I2400M
+	tristate
+	depends on WIMAX
+	select FW_LOADER
+
+comment "Enable USB support to see WiMAX USB drivers"
+	depends on USB = n
+
+comment "Enable MMC support to see WiMAX SDIO drivers"
+	depends on MMC = n
+
+config WIMAX_I2400M_USB
+	tristate "Intel Wireless WiMAX Connection 2400 over USB (including 5x50)"
+	depends on WIMAX && USB
+	select WIMAX_I2400M
+	help
+	  Select if you have a device based on the Intel WiMAX
+	  Connection 2400 over USB (like any of the Intel Wireless
+	  WiMAX/WiFi Link 5x50 series).
+
+	  If unsure, it is safe to select M (module).
+
+config WIMAX_I2400M_SDIO
+	tristate "Intel Wireless WiMAX Connection 2400 over SDIO"
+	depends on WIMAX && MMC
+	select WIMAX_I2400M
+	help
+	  Select if you have a device based on the Intel WiMAX
+	  Connection 2400 over SDIO.
+
+	  If unsure, it is safe to select M (module).
+
+config WIMAX_I2400M_DEBUG_LEVEL
+	int "WiMAX i2400m debug level"
+	depends on WIMAX_I2400M
+	default 8
+	help
+
+	  Select the maximum debug verbosity level to be compiled into
+	  the WiMAX i2400m driver code.
+
+	  By default, this is disabled at runtime and can be
+	  selectively enabled at runtime for different parts of the
+	  code using the sysfs debug-levels file.
+
+	  If set at zero, this will compile out all the debug code.
+
+	  It is recommended that it is left at 8.
diff --git a/drivers/net/wimax/i2400m/Makefile b/drivers/net/wimax/i2400m/Makefile
new file mode 100644
index 00000000000..1696e936cf5
--- /dev/null
+++ b/drivers/net/wimax/i2400m/Makefile
@@ -0,0 +1,29 @@
+
+obj-$(CONFIG_WIMAX_I2400M) += i2400m.o
+obj-$(CONFIG_WIMAX_I2400M_USB) += i2400m-usb.o
+obj-$(CONFIG_WIMAX_I2400M_SDIO) += i2400m-sdio.o
+
+i2400m-y :=		\
+	control.o	\
+	driver.o	\
+	fw.o		\
+	op-rfkill.o	\
+	netdev.o	\
+	tx.o		\
+	rx.o
+
+i2400m-$(CONFIG_DEBUG_FS) += debugfs.o
+
+i2400m-usb-y :=			\
+	usb-fw.o		\
+	usb-notif.o		\
+	usb-tx.o		\
+	usb-rx.o		\
+	usb.o
+
+
+i2400m-sdio-y := 		\
+	sdio.o      		\
+	sdio-tx.o   		\
+	sdio-fw.o	 	\
+	sdio-rx.o