summaryrefslogtreecommitdiffstats
path: root/drivers/net/wimax
diff options
context:
space:
mode:
authorJohn W. Linville <linville@tuxdriver.com>2012-07-10 16:27:28 -0400
committerJohn W. Linville <linville@tuxdriver.com>2012-07-11 15:40:22 -0400
commit5da7b2e05ec17d8a90ea1f463d3b7d46975ceef2 (patch)
tree07b65448a598def4b34ca59256835b875d932479 /drivers/net/wimax
parent650cef38263c0f4c8970265354432be154eef425 (diff)
i2400m: remove SDIO device support
SDIO support in this driver was intended to support the iwmc3200 device. This hardware never became available to normal humans. Leaving this driver imposes unwelcome maintenance costs for no clear benefit. Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Diffstat (limited to 'drivers/net/wimax')
-rw-r--r--drivers/net/wimax/i2400m/Kconfig22
-rw-r--r--drivers/net/wimax/i2400m/Makefile8
-rw-r--r--drivers/net/wimax/i2400m/driver.c3
-rw-r--r--drivers/net/wimax/i2400m/fw.c3
-rw-r--r--drivers/net/wimax/i2400m/i2400m-sdio.h157
-rw-r--r--drivers/net/wimax/i2400m/i2400m.h13
-rw-r--r--drivers/net/wimax/i2400m/sdio-debug-levels.h22
-rw-r--r--drivers/net/wimax/i2400m/sdio-fw.c210
-rw-r--r--drivers/net/wimax/i2400m/sdio-rx.c301
-rw-r--r--drivers/net/wimax/i2400m/sdio-tx.c177
-rw-r--r--drivers/net/wimax/i2400m/sdio.c602
11 files changed, 8 insertions, 1510 deletions
diff --git a/drivers/net/wimax/i2400m/Kconfig b/drivers/net/wimax/i2400m/Kconfig
index 672de18a776..71453db1425 100644
--- a/drivers/net/wimax/i2400m/Kconfig
+++ b/drivers/net/wimax/i2400m/Kconfig
@@ -7,9 +7,6 @@ config WIMAX_I2400M
comment "Enable USB support to see WiMAX USB drivers"
depends on USB = n
-comment "Enable MMC support to see WiMAX SDIO drivers"
- depends on MMC = n
-
config WIMAX_I2400M_USB
tristate "Intel Wireless WiMAX Connection 2400 over USB (including 5x50)"
depends on WIMAX && USB
@@ -21,25 +18,6 @@ config WIMAX_I2400M_USB
If unsure, it is safe to select M (module).
-config WIMAX_I2400M_SDIO
- tristate "Intel Wireless WiMAX Connection 2400 over SDIO"
- depends on WIMAX && MMC
- select WIMAX_I2400M
- help
- Select if you have a device based on the Intel WiMAX
- Connection 2400 over SDIO.
-
- If unsure, it is safe to select M (module).
-
-config WIMAX_IWMC3200_SDIO
- bool "Intel Wireless Multicom WiMAX Connection 3200 over SDIO (EXPERIMENTAL)"
- depends on WIMAX_I2400M_SDIO
- depends on EXPERIMENTAL
- select IWMC3200TOP
- help
- Select if you have a device based on the Intel Multicom WiMAX
- Connection 3200 over SDIO.
-
config WIMAX_I2400M_DEBUG_LEVEL
int "WiMAX i2400m debug level"
depends on WIMAX_I2400M
diff --git a/drivers/net/wimax/i2400m/Makefile b/drivers/net/wimax/i2400m/Makefile
index 5d9e018d31a..f6d19c34808 100644
--- a/drivers/net/wimax/i2400m/Makefile
+++ b/drivers/net/wimax/i2400m/Makefile
@@ -1,7 +1,6 @@
obj-$(CONFIG_WIMAX_I2400M) += i2400m.o
obj-$(CONFIG_WIMAX_I2400M_USB) += i2400m-usb.o
-obj-$(CONFIG_WIMAX_I2400M_SDIO) += i2400m-sdio.o
i2400m-y := \
control.o \
@@ -21,10 +20,3 @@ i2400m-usb-y := \
usb-tx.o \
usb-rx.o \
usb.o
-
-
-i2400m-sdio-y := \
- sdio.o \
- sdio-tx.o \
- sdio-fw.o \
- sdio-rx.o
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 47cae7150bc..850b8bc38be 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -754,8 +754,7 @@ EXPORT_SYMBOL_GPL(i2400m_error_recovery);
/*
* Alloc the command and ack buffers for boot mode
*
- * Get the buffers needed to deal with boot mode messages. These
- * buffers need to be allocated before the sdio receive irq is setup.
+ * Get the buffers needed to deal with boot mode messages.
*/
static
int i2400m_bm_buf_alloc(struct i2400m *i2400m)
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 7cbd7d231e1..7632f8cf09d 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -51,8 +51,7 @@
* firmware. Normal hardware takes only signed firmware.
*
* On boot mode, in USB, we write to the device using the bulk out
- * endpoint and read from it in the notification endpoint. In SDIO we
- * talk to it via the write address and read from the read address.
+ * endpoint and read from it in the notification endpoint.
*
* Upon entrance to boot mode, the device sends (preceded with a few
* zero length packets (ZLPs) on the notification endpoint in USB) a
diff --git a/drivers/net/wimax/i2400m/i2400m-sdio.h b/drivers/net/wimax/i2400m/i2400m-sdio.h
deleted file mode 100644
index 1d63ffdedfd..00000000000
--- a/drivers/net/wimax/i2400m/i2400m-sdio.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Intel Wireless WiMAX Connection 2400m
- * SDIO-specific i2400m driver definitions
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Brian Bian <brian.bian@intel.com>
- * Dirk Brandewie <dirk.j.brandewie@intel.com>
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * Yanir Lubetkin <yanirx.lubetkin@intel.com>
- * - Initial implementation
- *
- *
- * This driver implements the bus-specific part of the i2400m for
- * SDIO. Check i2400m.h for a generic driver description.
- *
- * ARCHITECTURE
- *
- * This driver sits under the bus-generic i2400m driver, providing the
- * connection to the device.
- *
- * When probed, all the function pointers are setup and then the
- * bus-generic code called. The generic driver will then use the
- * provided pointers for uploading firmware (i2400ms_bus_bm*() in
- * sdio-fw.c) and then setting up the device (i2400ms_dev_*() in
- * sdio.c).
- *
- * Once firmware is uploaded, TX functions (sdio-tx.c) are called when
- * data is ready for transmission in the TX fifo; then the SDIO IRQ is
- * fired and data is available (sdio-rx.c), it is sent to the generic
- * driver for processing with i2400m_rx.
- */
-
-#ifndef __I2400M_SDIO_H__
-#define __I2400M_SDIO_H__
-
-#include "i2400m.h"
-
-/* Host-Device interface for SDIO */
-enum {
- I2400M_SDIO_BOOT_RETRIES = 3,
- I2400MS_BLK_SIZE = 256,
- I2400MS_PL_SIZE_MAX = 0x3E00,
-
- I2400MS_DATA_ADDR = 0x0,
- I2400MS_INTR_STATUS_ADDR = 0x13,
- I2400MS_INTR_CLEAR_ADDR = 0x13,
- I2400MS_INTR_ENABLE_ADDR = 0x14,
- I2400MS_INTR_GET_SIZE_ADDR = 0x2C,
- /* The number of ticks to wait for the device to signal that
- * it is ready */
- I2400MS_INIT_SLEEP_INTERVAL = 100,
- /* How long to wait for the device to settle after reset */
- I2400MS_SETTLE_TIME = 40,
- /* The number of msec to wait for IOR after sending IOE */
- IWMC3200_IOR_TIMEOUT = 10,
-};
-
-
-/**
- * struct i2400ms - descriptor for a SDIO connected i2400m
- *
- * @i2400m: bus-generic i2400m implementation; has to be first (see
- * it's documentation in i2400m.h).
- *
- * @func: pointer to our SDIO function
- *
- * @tx_worker: workqueue struct used to TX data when the bus-generic
- * code signals packets are pending for transmission to the device.
- *
- * @tx_workqueue: workqeueue used for data TX; we don't use the
- * system's workqueue as that might cause deadlocks with code in
- * the bus-generic driver. The read/write operation to the queue
- * is protected with spinlock (tx_lock in struct i2400m) to avoid
- * the queue being destroyed in the middle of a the queue read/write
- * operation.
- *
- * @debugfs_dentry: dentry for the SDIO specific debugfs files
- *
- * Note this value is set to NULL upon destruction; this is
- * because some routinges use it to determine if we are inside the
- * probe() path or some other path. When debugfs is disabled,
- * creation sets the dentry to '(void*) -ENODEV', which is valid
- * for the test.
- */
-struct i2400ms {
- struct i2400m i2400m; /* FIRST! See doc */
- struct sdio_func *func;
-
- struct work_struct tx_worker;
- struct workqueue_struct *tx_workqueue;
- char tx_wq_name[32];
-
- struct dentry *debugfs_dentry;
-
- wait_queue_head_t bm_wfa_wq;
- int bm_wait_result;
- size_t bm_ack_size;
-
- /* Device is any of the iwmc3200 SKUs */
- unsigned iwmc3200:1;
-};
-
-
-static inline
-void i2400ms_init(struct i2400ms *i2400ms)
-{
- i2400m_init(&i2400ms->i2400m);
-}
-
-
-extern int i2400ms_rx_setup(struct i2400ms *);
-extern void i2400ms_rx_release(struct i2400ms *);
-
-extern int i2400ms_tx_setup(struct i2400ms *);
-extern void i2400ms_tx_release(struct i2400ms *);
-extern void i2400ms_bus_tx_kick(struct i2400m *);
-
-extern ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *,
- const struct i2400m_bootrom_header *,
- size_t, int);
-extern ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *,
- struct i2400m_bootrom_header *,
- size_t);
-extern void i2400ms_bus_bm_release(struct i2400m *);
-extern int i2400ms_bus_bm_setup(struct i2400m *);
-
-#endif /* #ifndef __I2400M_SDIO_H__ */
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index c806d455021..79c6505b5c2 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -46,7 +46,7 @@
* - bus generic driver (this part)
*
* The bus specific driver sets up stuff specific to the bus the
- * device is connected to (USB, SDIO, PCI, tam-tam...non-authoritative
+ * device is connected to (USB, PCI, tam-tam...non-authoritative
* nor binding list) which is basically the device-model management
* (probe/disconnect, etc), moving data from device to kernel and
* back, doing the power saving details and reseting the device.
@@ -238,14 +238,13 @@ struct i2400m_barker_db;
* amount needed for loading firmware, where us dev_start/stop setup
* the rest needed to do full data/control traffic.
*
- * @bus_tx_block_size: [fill] SDIO imposes a 256 block size, USB 16,
- * so we have a tx_blk_size variable that the bus layer sets to
- * tell the engine how much of that we need.
+ * @bus_tx_block_size: [fill] USB imposes a 16 block size, but other
+ * busses will differ. So we have a tx_blk_size variable that the
+ * bus layer sets to tell the engine how much of that we need.
*
* @bus_tx_room_min: [fill] Minimum room required while allocating
- * TX queue's buffer space for message header. SDIO requires
- * 224 bytes and USB 16 bytes. Refer bus specific driver code
- * for details.
+ * TX queue's buffer space for message header. USB requires
+ * 16 bytes. Refer to bus specific driver code for details.
*
* @bus_pl_size_max: [fill] Maximum payload size.
*
diff --git a/drivers/net/wimax/i2400m/sdio-debug-levels.h b/drivers/net/wimax/i2400m/sdio-debug-levels.h
deleted file mode 100644
index c5199874130..00000000000
--- a/drivers/net/wimax/i2400m/sdio-debug-levels.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * debug levels control file for the i2400m module's
- */
-#ifndef __debug_levels__h__
-#define __debug_levels__h__
-
-/* Maximum compile and run time debug level for all submodules */
-#define D_MODULENAME i2400m_sdio
-#define D_MASTER CONFIG_WIMAX_I2400M_DEBUG_LEVEL
-
-#include <linux/wimax/debug.h>
-
-/* List of all the enabled modules */
-enum d_module {
- D_SUBMODULE_DECLARE(main),
- D_SUBMODULE_DECLARE(tx),
- D_SUBMODULE_DECLARE(rx),
- D_SUBMODULE_DECLARE(fw)
-};
-
-
-#endif /* #ifndef __debug_levels__h__ */
diff --git a/drivers/net/wimax/i2400m/sdio-fw.c b/drivers/net/wimax/i2400m/sdio-fw.c
deleted file mode 100644
index 8e025418f5b..00000000000
--- a/drivers/net/wimax/i2400m/sdio-fw.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Intel Wireless WiMAX Connection 2400m
- * Firmware uploader's SDIO specifics
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Yanir Lubetkin <yanirx.lubetkin@intel.com>
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * - Initial implementation
- *
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * - Bus generic/specific split for USB
- *
- * Dirk Brandewie <dirk.j.brandewie@intel.com>
- * - Initial implementation for SDIO
- *
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * - SDIO rehash for changes in the bus-driver model
- *
- * Dirk Brandewie <dirk.j.brandewie@intel.com>
- * - Make it IRQ based, not polling
- *
- * THE PROCEDURE
- *
- * See fw.c for the generic description of this procedure.
- *
- * This file implements only the SDIO specifics. It boils down to how
- * to send a command and waiting for an acknowledgement from the
- * device.
- *
- * All this code is sequential -- all i2400ms_bus_bm_*() functions are
- * executed in the same thread, except i2400ms_bm_irq() [on its own by
- * the SDIO driver]. This makes it possible to avoid locking.
- *
- * COMMAND EXECUTION
- *
- * The generic firmware upload code will call i2400m_bus_bm_cmd_send()
- * to send commands.
- *
- * The SDIO devices expects things in 256 byte blocks, so it will pad
- * it, compute the checksum (if needed) and pass it to SDIO.
- *
- * ACK RECEPTION
- *
- * This works in IRQ mode -- the fw loader says when to wait for data
- * and for that it calls i2400ms_bus_bm_wait_for_ack().
- *
- * This checks if there is any data available (RX size > 0); if not,
- * waits for the IRQ handler to notify about it. Once there is data,
- * it is read and passed to the caller. Doing it this way we don't
- * need much coordination/locking, and it makes it much more difficult
- * for an interrupt to be lost and the wait_for_ack() function getting
- * stuck even when data is pending.
- */
-#include <linux/mmc/sdio_func.h>
-#include "i2400m-sdio.h"
-
-
-#define D_SUBMODULE fw
-#include "sdio-debug-levels.h"
-
-
-/*
- * Send a boot-mode command to the SDIO function
- *
- * We use a bounce buffer (i2400m->bm_cmd_buf) because we need to
- * touch the header if the RAW flag is not set.
- *
- * @flags: pass thru from i2400m_bm_cmd()
- * @return: cmd_size if ok, < 0 errno code on error.
- *
- * Note the command is padded to the SDIO block size for the device.
- */
-ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *i2400m,
- const struct i2400m_bootrom_header *_cmd,
- size_t cmd_size, int flags)
-{
- ssize_t result;
- struct device *dev = i2400m_dev(i2400m);
- struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
- int opcode = _cmd == NULL ? -1 : i2400m_brh_get_opcode(_cmd);
- struct i2400m_bootrom_header *cmd;
- /* SDIO restriction */
- size_t cmd_size_a = ALIGN(cmd_size, I2400MS_BLK_SIZE);
-
- d_fnstart(5, dev, "(i2400m %p cmd %p size %zu)\n",
- i2400m, _cmd, cmd_size);
- result = -E2BIG;
- if (cmd_size > I2400M_BM_CMD_BUF_SIZE)
- goto error_too_big;
-
- if (_cmd != i2400m->bm_cmd_buf)
- memmove(i2400m->bm_cmd_buf, _cmd, cmd_size);
- cmd = i2400m->bm_cmd_buf;
- if (cmd_size_a > cmd_size) /* Zero pad space */
- memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size);
- if ((flags & I2400M_BM_CMD_RAW) == 0) {
- if (WARN_ON(i2400m_brh_get_response_required(cmd) == 0))
- dev_warn(dev, "SW BUG: response_required == 0\n");
- i2400m_bm_cmd_prepare(cmd);
- }
- d_printf(4, dev, "BM cmd %d: %zu bytes (%zu padded)\n",
- opcode, cmd_size, cmd_size_a);
- d_dump(5, dev, cmd, cmd_size);
-
- sdio_claim_host(i2400ms->func); /* Send & check */
- result = sdio_memcpy_toio(i2400ms->func, I2400MS_DATA_ADDR,
- i2400m->bm_cmd_buf, cmd_size_a);
- sdio_release_host(i2400ms->func);
- if (result < 0) {
- dev_err(dev, "BM cmd %d: cannot send: %ld\n",
- opcode, (long) result);
- goto error_cmd_send;
- }
- result = cmd_size;
-error_cmd_send:
-error_too_big:
- d_fnend(5, dev, "(i2400m %p cmd %p size %zu) = %d\n",
- i2400m, _cmd, cmd_size, (int) result);
- return result;
-}
-
-
-/*
- * Read an ack from the device's boot-mode
- *
- * @i2400m:
- * @_ack: pointer to where to store the read data
- * @ack_size: how many bytes we should read
- *
- * Returns: < 0 errno code on error; otherwise, amount of received bytes.
- *
- * The ACK for a BM command is always at least sizeof(*ack) bytes, so
- * check for that. We don't need to check for device reboots
- *
- */
-ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *i2400m,
- struct i2400m_bootrom_header *ack,
- size_t ack_size)
-{
- ssize_t result;
- struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
- struct sdio_func *func = i2400ms->func;
- struct device *dev = &func->dev;
- int size;
-
- BUG_ON(sizeof(*ack) > ack_size);
-
- d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n",
- i2400m, ack, ack_size);
-
- result = wait_event_timeout(i2400ms->bm_wfa_wq,
- i2400ms->bm_ack_size != -EINPROGRESS,
- 2 * HZ);
- if (result == 0) {
- result = -ETIMEDOUT;
- dev_err(dev, "BM: error waiting for an ack\n");
- goto error_timeout;
- }
-
- spin_lock(&i2400m->rx_lock);
- result = i2400ms->bm_ack_size;
- BUG_ON(result == -EINPROGRESS);
- if (result < 0) /* so we exit when rx_release() is called */
- dev_err(dev, "BM: %s failed: %zd\n", __func__, result);
- else {
- size = min(ack_size, i2400ms->bm_ack_size);
- memcpy(ack, i2400m->bm_ack_buf, size);
- }
- /*
- * Remember always to clear the bm_ack_size to -EINPROGRESS
- * after the RX data is processed
- */
- i2400ms->bm_ack_size = -EINPROGRESS;
- spin_unlock(&i2400m->rx_lock);
-
-error_timeout:
- d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %zd\n",
- i2400m, ack, ack_size, result);
- return result;
-}
diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c
deleted file mode 100644
index fb6396dd115..00000000000
--- a/drivers/net/wimax/i2400m/sdio-rx.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * Intel Wireless WiMAX Connection 2400m
- * SDIO RX handling
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Dirk Brandewie <dirk.j.brandewie@intel.com>
- * - Initial implementation
- *
- *
- * This handles the RX path on SDIO.
- *
- * The SDIO bus driver calls the "irq" routine when data is available.
- * This is not a traditional interrupt routine since the SDIO bus
- * driver calls us from its irq thread context. Because of this
- * sleeping in the SDIO RX IRQ routine is okay.
- *
- * From there on, we obtain the size of the data that is available,
- * allocate an skb, copy it and then pass it to the generic driver's
- * RX routine [i2400m_rx()].
- *
- * ROADMAP
- *
- * i2400ms_irq()
- * i2400ms_rx()
- * __i2400ms_rx_get_size()
- * i2400m_is_boot_barker()
- * i2400m_rx()
- *
- * i2400ms_rx_setup()
- *
- * i2400ms_rx_release()
- */
-#include <linux/workqueue.h>
-#include <linux/wait.h>
-#include <linux/skbuff.h>
-#include <linux/mmc/sdio.h>
-#include <linux/mmc/sdio_func.h>
-#include <linux/slab.h>
-#include "i2400m-sdio.h"
-
-#define D_SUBMODULE rx
-#include "sdio-debug-levels.h"
-
-static const __le32 i2400m_ACK_BARKER[4] = {
- __constant_cpu_to_le32(I2400M_ACK_BARKER),
- __constant_cpu_to_le32(I2400M_ACK_BARKER),
- __constant_cpu_to_le32(I2400M_ACK_BARKER),
- __constant_cpu_to_le32(I2400M_ACK_BARKER)
-};
-
-
-/*
- * Read and return the amount of bytes available for RX
- *
- * The RX size has to be read like this: byte reads of three
- * sequential locations; then glue'em together.
- *
- * sdio_readl() doesn't work.
- */
-static ssize_t __i2400ms_rx_get_size(struct i2400ms *i2400ms)
-{
- int ret, cnt, val;
- ssize_t rx_size;
- unsigned xfer_size_addr;
- struct sdio_func *func = i2400ms->func;
- struct device *dev = &i2400ms->func->dev;
-
- d_fnstart(7, dev, "(i2400ms %p)\n", i2400ms);
- xfer_size_addr = I2400MS_INTR_GET_SIZE_ADDR;
- rx_size = 0;
- for (cnt = 0; cnt < 3; cnt++) {
- val = sdio_readb(func, xfer_size_addr + cnt, &ret);
- if (ret < 0) {
- dev_err(dev, "RX: Can't read byte %d of RX size from "
- "0x%08x: %d\n", cnt, xfer_size_addr + cnt, ret);
- rx_size = ret;
- goto error_read;
- }
- rx_size = rx_size << 8 | (val & 0xff);
- }
- d_printf(6, dev, "RX: rx_size is %ld\n", (long) rx_size);
-error_read:
- d_fnend(7, dev, "(i2400ms %p) = %ld\n", i2400ms, (long) rx_size);
- return rx_size;
-}
-
-
-/*
- * Read data from the device (when in normal)
- *
- * Allocate an SKB of the right size, read the data in and then
- * deliver it to the generic layer.
- *
- * We also check for a reboot barker. That means the device died and
- * we have to reboot it.
- */
-static
-void i2400ms_rx(struct i2400ms *i2400ms)
-{
- int ret;
- struct sdio_func *func = i2400ms->func;
- struct device *dev = &func->dev;
- struct i2400m *i2400m = &i2400ms->i2400m;
- struct sk_buff *skb;
- ssize_t rx_size;
-
- d_fnstart(7, dev, "(i2400ms %p)\n", i2400ms);
- rx_size = __i2400ms_rx_get_size(i2400ms);
- if (rx_size < 0) {
- ret = rx_size;
- goto error_get_size;
- }
- /*
- * Hardware quirk: make sure to clear the INTR status register
- * AFTER getting the data transfer size.
- */
- sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret);
-
- ret = -ENOMEM;
- skb = alloc_skb(rx_size, GFP_ATOMIC);
- if (NULL == skb) {
- dev_err(dev, "RX: unable to alloc skb\n");
- goto error_alloc_skb;
- }
- ret = sdio_memcpy_fromio(func, skb->data,
- I2400MS_DATA_ADDR, rx_size);
- if (ret < 0) {
- dev_err(dev, "RX: SDIO data read failed: %d\n", ret);
- goto error_memcpy_fromio;
- }
-
- rmb(); /* make sure we get boot_mode from dev_reset_handle */
- if (unlikely(i2400m->boot_mode == 1)) {
- spin_lock(&i2400m->rx_lock);
- i2400ms->bm_ack_size = rx_size;
- spin_unlock(&i2400m->rx_lock);
- memcpy(i2400m->bm_ack_buf, skb->data, rx_size);
- wake_up(&i2400ms->bm_wfa_wq);
- d_printf(5, dev, "RX: SDIO boot mode message\n");
- kfree_skb(skb);
- goto out;
- }
- ret = -EIO;
- if (unlikely(rx_size < sizeof(__le32))) {
- dev_err(dev, "HW BUG? only %zu bytes received\n", rx_size);
- goto error_bad_size;
- }
- if (likely(i2400m_is_d2h_barker(skb->data))) {
- skb_put(skb, rx_size);
- i2400m_rx(i2400m, skb);
- } else if (unlikely(i2400m_is_boot_barker(i2400m,
- skb->data, rx_size))) {
- ret = i2400m_dev_reset_handle(i2400m, "device rebooted");
- dev_err(dev, "RX: SDIO reboot barker\n");
- kfree_skb(skb);
- } else {
- i2400m_unknown_barker(i2400m, skb->data, rx_size);
- kfree_skb(skb);
- }
-out:
- d_fnend(7, dev, "(i2400ms %p) = void\n", i2400ms);
- return;
-
-error_memcpy_fromio:
- kfree_skb(skb);
-error_alloc_skb:
-error_get_size:
-error_bad_size:
- d_fnend(7, dev, "(i2400ms %p) = %d\n", i2400ms, ret);
-}
-
-
-/*
- * Process an interrupt from the SDIO card
- *
- * FIXME: need to process other events that are not just ready-to-read
- *
- * Checks there is data ready and then proceeds to read it.
- */
-static
-void i2400ms_irq(struct sdio_func *func)
-{
- int ret;
- struct i2400ms *i2400ms = sdio_get_drvdata(func);
- struct device *dev = &func->dev;
- int val;
-
- d_fnstart(6, dev, "(i2400ms %p)\n", i2400ms);
- val = sdio_readb(func, I2400MS_INTR_STATUS_ADDR, &ret);
- if (ret < 0) {
- dev_err(dev, "RX: Can't read interrupt status: %d\n", ret);
- goto error_no_irq;
- }
- if (!val) {
- dev_err(dev, "RX: BUG? got IRQ but no interrupt ready?\n");
- goto error_no_irq;
- }
- i2400ms_rx(i2400ms);
-error_no_irq:
- d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms);
-}
-
-
-/*
- * Setup SDIO RX
- *
- * Hooks up the IRQ handler and then enables IRQs.
- */
-int i2400ms_rx_setup(struct i2400ms *i2400ms)
-{
- int result;
- struct sdio_func *func = i2400ms->func;
- struct device *dev = &func->dev;
- struct i2400m *i2400m = &i2400ms->i2400m;
-
- d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
-
- init_waitqueue_head(&i2400ms->bm_wfa_wq);
- spin_lock(&i2400m->rx_lock);
- i2400ms->bm_wait_result = -EINPROGRESS;
- /*
- * Before we are about to enable the RX interrupt, make sure
- * bm_ack_size is cleared to -EINPROGRESS which indicates
- * no RX interrupt happened yet or the previous interrupt
- * has been handled, we are ready to take the new interrupt
- */
- i2400ms->bm_ack_size = -EINPROGRESS;
- spin_unlock(&i2400m->rx_lock);
-
- sdio_claim_host(func);
- result = sdio_claim_irq(func, i2400ms_irq);
- if (result < 0) {
- dev_err(dev, "Cannot claim IRQ: %d\n", result);
- goto error_irq_claim;
- }
- result = 0;
- sdio_writeb(func, 1, I2400MS_INTR_ENABLE_ADDR, &result);
- if (result < 0) {
- sdio_release_irq(func);
- dev_err(dev, "Failed to enable interrupts %d\n", result);
- }
-error_irq_claim:
- sdio_release_host(func);
- d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result);
- return result;
-}
-
-
-/*
- * Tear down SDIO RX
- *
- * Disables IRQs in the device and removes the IRQ handler.
- */
-void i2400ms_rx_release(struct i2400ms *i2400ms)
-{
- int result;
- struct sdio_func *func = i2400ms->func;
- struct device *dev = &func->dev;
- struct i2400m *i2400m = &i2400ms->i2400m;
-
- d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
- spin_lock(&i2400m->rx_lock);
- i2400ms->bm_ack_size = -EINTR;
- spin_unlock(&i2400m->rx_lock);
- wake_up_all(&i2400ms->bm_wfa_wq);
- sdio_claim_host(func);
- sdio_writeb(func, 0, I2400MS_INTR_ENABLE_ADDR, &result);
- sdio_release_irq(func);
- sdio_release_host(func);
- d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result);
-}
diff --git a/drivers/net/wimax/i2400m/sdio-tx.c b/drivers/net/wimax/i2400m/sdio-tx.c
deleted file mode 100644
index b53cd1c80e3..00000000000
--- a/drivers/net/wimax/i2400m/sdio-tx.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Intel Wireless WiMAX Connection 2400m
- * SDIO TX transaction backends
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Dirk Brandewie <dirk.j.brandewie@intel.com>
- * - Initial implementation
- *
- *
- * Takes the TX messages in the i2400m's driver TX FIFO and sends them
- * to the device until there are no more.
- *
- * If we fail sending the message, we just drop it. There isn't much
- * we can do at this point. Most of the traffic is network, which has
- * recovery methods for dropped packets.
- *
- * The SDIO functions are not atomic, so we can't run from the context
- * where i2400m->bus_tx_kick() [i2400ms_bus_tx_kick()] is being called
- * (some times atomic). Thus, the actual TX work is deferred to a
- * workqueue.
- *
- * ROADMAP
- *
- * i2400ms_bus_tx_kick()
- * i2400ms_tx_submit() [through workqueue]
- *
- * i2400m_tx_setup()
- *
- * i2400m_tx_release()
- */
-#include <linux/mmc/sdio_func.h>
-#include "i2400m-sdio.h"
-
-#define D_SUBMODULE tx
-#include "sdio-debug-levels.h"
-
-
-/*
- * Pull TX transations from the TX FIFO and send them to the device
- * until there are no more.
- */
-static
-void i2400ms_tx_submit(struct work_struct *ws)
-{
- int result;
- struct i2400ms *i2400ms = container_of(ws, struct i2400ms, tx_worker);
- struct i2400m *i2400m = &i2400ms->i2400m;
- struct sdio_func *func = i2400ms->func;
- struct device *dev = &func->dev;
- struct i2400m_msg_hdr *tx_msg;
- size_t tx_msg_size;
-
- d_fnstart(4, dev, "(i2400ms %p, i2400m %p)\n", i2400ms, i2400ms);
-
- while (NULL != (tx_msg = i2400m_tx_msg_get(i2400m, &tx_msg_size))) {
- d_printf(2, dev, "TX: submitting %zu bytes\n", tx_msg_size);
- d_dump(5, dev, tx_msg, tx_msg_size);
-
- sdio_claim_host(func);
- result = sdio_memcpy_toio(func, 0, tx_msg, tx_msg_size);
- sdio_release_host(func);
-
- i2400m_tx_msg_sent(i2400m);
-
- if (result < 0) {
- dev_err(dev, "TX: cannot submit TX; tx_msg @%zu %zu B:"
- " %d\n", (void *) tx_msg - i2400m->tx_buf,
- tx_msg_size, result);
- }
-
- if (result == -ETIMEDOUT) {
- i2400m_error_recovery(i2400m);
- break;
- }
- d_printf(2, dev, "TX: %zub submitted\n", tx_msg_size);
- }
-
- d_fnend(4, dev, "(i2400ms %p) = void\n", i2400ms);
-}
-
-
-/*
- * The generic driver notifies us that there is data ready for TX
- *
- * Schedule a run of i2400ms_tx_submit() to handle it.
- */
-void i2400ms_bus_tx_kick(struct i2400m *i2400m)
-{
- struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
- struct device *dev = &i2400ms->func->dev;
- unsigned long flags;
-
- d_fnstart(3, dev, "(i2400m %p) = void\n", i2400m);
-
- /* schedule tx work, this is because tx may block, therefore
- * it has to run in a thread context.
- */
- spin_lock_irqsave(&i2400m->tx_lock, flags);
- if (i2400ms->tx_workqueue != NULL)
- queue_work(i2400ms->tx_workqueue, &i2400ms->tx_worker);
- spin_unlock_irqrestore(&i2400m->tx_lock, flags);
-
- d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
-}
-
-int i2400ms_tx_setup(struct i2400ms *i2400ms)
-{
- int result;
- struct device *dev = &i2400ms->func->dev;
- struct i2400m *i2400m = &i2400ms->i2400m;
- struct workqueue_struct *tx_workqueue;
- unsigned long flags;
-
- d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
-
- INIT_WORK(&i2400ms->tx_worker, i2400ms_tx_submit);
- snprintf(i2400ms->tx_wq_name, sizeof(i2400ms->tx_wq_name),
- "%s-tx", i2400m->wimax_dev.name);
- tx_workqueue =
- create_singlethread_workqueue(i2400ms->tx_wq_name);
- if (tx_workqueue == NULL) {
- dev_err(dev, "TX: failed to create workqueue\n");
- result = -ENOMEM;
- } else
- result = 0;
- spin_lock_irqsave(&i2400m->tx_lock, flags);
- i2400ms->tx_workqueue = tx_workqueue;
- spin_unlock_irqrestore(&i2400m->tx_lock, flags);
- d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result);
- return result;
-}
-
-void i2400ms_tx_release(struct i2400ms *i2400ms)
-{
- struct i2400m *i2400m = &i2400ms->i2400m;
- struct workqueue_struct *tx_workqueue;
- unsigned long flags;
-
- tx_workqueue = i2400ms->tx_workqueue;
-
- spin_lock_irqsave(&i2400m->tx_lock, flags);
- i2400ms->tx_workqueue = NULL;
- spin_unlock_irqrestore(&i2400m->tx_lock, flags);
-
- if (tx_workqueue)
- destroy_workqueue(tx_workqueue);
-}
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
deleted file mode 100644
index 21a9edd6e75..00000000000
--- a/drivers/net/wimax/i2400m/sdio.c
+++ /dev/null
@@ -1,602 +0,0 @@
-/*
- * Intel Wireless WiMAX Connection 2400m
- * Linux driver model glue for the SDIO device, reset & fw upload
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation <linux-wimax@intel.com>
- * Dirk Brandewie <dirk.j.brandewie@intel.com>
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * Yanir Lubetkin <yanirx.lubetkin@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * See i2400m-sdio.h for a general description of this driver.
- *
- * This file implements driver model glue, and hook ups for the
- * generic driver to implement the bus-specific functions (device
- * communication setup/tear down, firmware upload and resetting).
- *
- * ROADMAP
- *
- * i2400m_probe()
- * alloc_netdev()
- * i2400ms_netdev_setup()
- * i2400ms_init()
- * i2400m_netdev_setup()
- * i2400ms_enable_function()
- * i2400m_setup()
- *
- * i2400m_remove()
- * i2400m_release()
- * free_netdev(net_dev)
- *
- * i2400ms_bus_reset() Called by i2400m_reset
- * __i2400ms_reset()
- * __i2400ms_send_barker()
- */
-
-#include <linux/slab.h>
-#include <linux/debugfs.h>
-#include <linux/mmc/sdio_ids.h>
-#include <linux/mmc/sdio.h>
-#include <linux/mmc/sdio_func.h>
-#include "i2400m-sdio.h"
-#include <linux/wimax/i2400m.h>
-#include <linux/module.h>
-
-#define D_SUBMODULE main
-#include "sdio-debug-levels.h"
-
-/* IOE WiMAX function timeout in seconds */
-static int ioe_timeout = 2;
-module_param(ioe_timeout, int, 0);
-
-static char i2400ms_debug_params[128];
-module_param_string(debug, i2400ms_debug_params, sizeof(i2400ms_debug_params),
- 0644);
-MODULE_PARM_DESC(debug,
- "String of space-separated NAME:VALUE pairs, where NAMEs "
- "are the different debug submodules and VALUE are the "
- "initial debug value to set.");
-
-/* Our firmware file name list */
-static const char *i2400ms_bus_fw_names[] = {
-#define I2400MS_FW_FILE_NAME "i2400m-fw-sdio-1.3.sbcf"
- I2400MS_FW_FILE_NAME,
- NULL
-};
-
-
-static const struct i2400m_poke_table i2400ms_pokes[] = {
- I2400M_FW_POKE(0x6BE260, 0x00000088),
- I2400M_FW_POKE(0x080550, 0x00000005),
- I2400M_FW_POKE(0xAE0000, 0x00000000),
- I2400M_FW_POKE(0x000000, 0x00000000), /* MUST be 0 terminated or bad
- * things will happen */
-};
-
-/*
- * Enable the SDIO function
- *
- * Tries to enable the SDIO function; might fail if it is still not
- * ready (in some hardware, the SDIO WiMAX function is only enabled
- * when we ask it to explicitly doing). Tries until a timeout is
- * reached.
- *
- * The @maxtries argument indicates how many times (at most) it should
- * be tried to enable the function. 0 means forever. This acts along
- * with the timeout (ie: it'll stop trying as soon as the maximum
- * number of tries is reached _or_ as soon as the timeout is reached).
- *
- * The reverse of this is...sdio_disable_function()
- *
- * Returns: 0 if the SDIO function was enabled, < 0 errno code on
- * error (-ENODEV when it was unable to enable the function).
- */
-static
-int i2400ms_enable_function(struct i2400ms *i2400ms, unsigned maxtries)
-{
- struct sdio_func *func = i2400ms->func;
- u64 timeout;
- int err;
- struct device *dev = &func->dev;
- unsigned tries = 0;
-
- d_fnstart(3, dev, "(func %p)\n", func);
- /* Setup timeout (FIXME: This needs to read the CIS table to
- * get a real timeout) and then wait for the device to signal
- * it is ready */
- timeout = get_jiffies_64() + ioe_timeout * HZ;
- err = -ENODEV;
- while (err != 0 && time_before64(get_jiffies_64(), timeout)) {
- sdio_claim_host(func);
- /*
- * There is a sillicon bug on the IWMC3200, where the
- * IOE timeout will cause problems on Moorestown
- * platforms (system hang). We explicitly overwrite
- * func->enable_timeout here to work around the issue.
- */
- if (i2400ms->iwmc3200)
- func->enable_timeout = IWMC3200_IOR_TIMEOUT;
- err = sdio_enable_func(func);
- if (0 == err) {
- sdio_release_host(func);
- d_printf(2, dev, "SDIO function enabled\n");
- goto function_enabled;
- }
- d_printf(2, dev, "SDIO function failed to enable: %d\n", err);
- sdio_release_host(func);
- if (maxtries > 0 && ++tries >= maxtries) {
- err = -ETIME;
- break;
- }
- msleep(I2400MS_INIT_SLEEP_INTERVAL);
- }
- /* If timed out, device is not there yet -- get -ENODEV so
- * the device driver core will retry later on. */
- if (err == -ETIME) {
- dev_err(dev, "Can't enable WiMAX function; "
- " has the function been enabled?\n");
- err = -ENODEV;
- }
-function_enabled:
- d_fnend(3, dev, "(func %p) = %d\n", func, err);
- return err;
-}
-
-
-/*
- * Setup minimal device communication infrastructure needed to at
- * least be able to update the firmware.
- *
- * Note the ugly trick: if we are in the probe path
- * (i2400ms->debugfs_dentry == NULL), we only retry function
- * enablement one, to avoid racing with the iwmc3200 top controller.
- */
-static
-int i2400ms_bus_setup(struct i2400m *i2400m)
-{
- int result;
- struct i2400ms *i2400ms =
- container_of(i2400m, struct i2400ms, i2400m);
- struct device *dev = i2400m_dev(i2400m);
- struct sdio_func *func = i2400ms->func;
- int retries;
-
- sdio_claim_host(func);
- result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
- sdio_release_host(func);
- if (result < 0) {
- dev_err(dev, "Failed to set block size: %d\n", result);
- goto error_set_blk_size;
- }
-
- if (i2400ms->iwmc3200 && i2400ms->debugfs_dentry == NULL)
- retries = 1;
- else
- retries = 0;
- result = i2400ms_enable_function(i2400ms, retries);
- if (result < 0) {
- dev_err(dev, "Cannot enable SDIO function: %d\n", result);
- goto error_func_enable;
- }
-
- result = i2400ms_tx_setup(i2400ms);
- if (result < 0)
- goto error_tx_setup;
- result = i2400ms_rx_setup(i2400ms);
- if (result < 0)
- goto error_rx_setup;
- return 0;
-
-error_rx_setup:
- i2400ms_tx_release(i2400ms);
-error_tx_setup:
- sdio_claim_host(func);
- sdio_disable_func(func);
- sdio_release_host(func);
-error_func_enable:
-error_set_blk_size:
- return result;
-}
-
-
-/*
- * Tear down minimal device communication infrastructure needed to at
- * least be able to update the firmware.
- */
-static
-void i2400ms_bus_release(struct i2400m *i2400m)
-{
- struct i2400ms *i2400ms =
- container_of(i2400m, struct i2400ms, i2400m);
- struct sdio_func *func = i2400ms->func;
-
- i2400ms_rx_release(i2400ms);
- i2400ms_tx_release(i2400ms);
- sdio_claim_host(func);
- sdio_disable_func(func);
- sdio_release_host(func);
-}
-
-
-/*
- * Setup driver resources needed to communicate with the device
- *
- * The fw needs some time to settle, and it was just uploaded,
- * so give it a break first. I'd prefer to just wait for the device to
- * send something, but seems the poking we do to enable SDIO stuff
- * interferes with it, so just give it a break before starting...
- */
-static
-int i2400ms_bus_dev_start(struct i2400m *i2400m)
-{
- struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
- struct sdio_func *func = i2400ms->func;
- struct device *dev = &func->dev;
-
- d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
- msleep(200);
- d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, 0);
- return 0;
-}
-
-
-/*
- * Sends a barker buffer to the device
- *
- * This helper will allocate a kmalloced buffer and use it to transmit
- * (then free it). Reason for this is that the SDIO host controller
- * expects alignment (unknown exactly which) which the stack won't
- * really provide and certain arches/host-controller combinations
- * cannot use stack/vmalloc/text areas for DMA transfers.
- */
-static
-int __i2400ms_send_barker(struct i2400ms *i2400ms,
- const __le32 *barker, size_t barker_size)
-{
- int ret;
- struct sdio_func *func = i2400ms->func;
- struct device *dev = &func->dev;
- void *buffer;
-
- ret = -ENOMEM;
- buffer = kmalloc(I2400MS_BLK_SIZE, GFP_KERNEL);
- if (buffer == NULL)
- goto error_kzalloc;
-
- memcpy(buffer, barker, barker_size);
- sdio_claim_host(func);
- ret = sdio_memcpy_toio(func, 0, buffer, I2400MS_BLK_SIZE);
- sdio_release_host(func);
-
- if (ret < 0)
- d_printf(0, dev, "E: barker error: %d\n", ret);
-
- kfree(buffer);
-error_kzalloc:
- return ret;
-}
-
-
-/*
- * Reset a device at different levels (warm, cold or bus)
- *
- * @i2400ms: device descriptor
- * @reset_type: soft, warm or bus reset (I2400M_RT_WARM/SOFT/BUS)
- *
- * FIXME: not tested -- need to confirm expected effects
- *
- * Warm and cold resets get an SDIO reset if they fail (unimplemented)
- *
- * Warm reset:
- *
- * The device will be fully reset internally, but won't be
- * disconnected from the bus (so no reenumeration will
- * happen). Firmware upload will be necessary.
- *
- * The device will send a reboot barker that will trigger the driver
- * to reinitialize the state via __i2400m_dev_reset_handle.
- *
- *
- * Cold and bus reset:
- *
- * The device will be fully reset internally, disconnected from the
- * bus an a reenumeration will happen. Firmware upload will be
- * necessary. Thus, we don't do any locking or struct
- * reinitialization, as we are going to be fully disconnected and
- * reenumerated.
- *
- * Note we need to return -ENODEV if a warm reset was requested and we
- * had to resort to a bus reset. See i2400m_op_reset(), wimax_reset()
- * and wimax_dev->op_reset.
- *
- * WARNING: no driver state saved/fixed
- */
-static
-int i2400ms_bus_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
-{
- int result = 0;
- struct i2400ms *i2400ms =
- container_of(i2400m, struct i2400ms, i2400m);
- struct device *dev = i2400m_dev(i2400m);
- static const __le32 i2400m_WARM_BOOT_BARKER[4] = {
- cpu_to_le32(I2400M_WARM_RESET_BARKER),
- cpu_to_le32(I2400M_WARM_RESET_BARKER),
- cpu_to_le32(I2400M_WARM_RESET_BARKER),
- cpu_to_le32(I2400M_WARM_RESET_BARKER),
- };
- static const __le32 i2400m_COLD_BOOT_BARKER[4] = {
- cpu_to_le32(I2400M_COLD_RESET_BARKER),
- cpu_to_le32(I2400M_COLD_RESET_BARKER),
- cpu_to_le32(I2400M_COLD_RESET_BARKER),
- cpu_to_le32(I2400M_COLD_RESET_BARKER),
- };
-
- if (rt == I2400M_RT_WARM)
- result = __i2400ms_send_barker(i2400ms, i2400m_WARM_BOOT_BARKER,
- sizeof(i2400m_WARM_BOOT_BARKER));
- else if (rt == I2400M_RT_COLD)
- result = __i2400ms_send_barker(i2400ms, i2400m_COLD_BOOT_BARKER,
- sizeof(i2400m_COLD_BOOT_BARKER));
- else if (rt == I2400M_RT_BUS) {
-do_bus_reset:
-
- i2400ms_bus_release(i2400m);
-
- /* Wait for the device to settle */
- msleep(40);
-
- result = i2400ms_bus_setup(i2400m);
- } else
- BUG();
- if (result < 0 && rt != I2400M_RT_BUS) {
- dev_err(dev, "%s reset failed (%d); trying SDIO reset\n",
- rt == I2400M_RT_WARM ? "warm" : "cold", result);
- rt = I2400M_RT_BUS;
- goto do_bus_reset;
- }
- return result;
-}
-
-
-static
-void i2400ms_netdev_setup(struct net_device *net_dev)
-{
- struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
- struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
- i2400ms_init(i2400ms);
- i2400m_netdev_setup(net_dev);
-}
-
-
-/*
- * Debug levels control; see debug.h
- */
-struct d_level D_LEVEL[] = {
- D_SUBMODULE_DEFINE(main),
- D_SUBMODULE_DEFINE(tx),
- D_SUBMODULE_DEFINE(rx),
- D_SUBMODULE_DEFINE(fw),
-};
-size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
-
-
-#define __debugfs_register(prefix, name, parent) \
-do { \
- result = d_level_register_debugfs(prefix, name, parent); \
- if (result < 0) \
- goto error; \
-} while (0)
-
-
-static
-int i2400ms_debugfs_add(struct i2400ms *i2400ms)
-{
- int result;
- struct dentry *dentry = i2400ms->i2400m.wimax_dev.debugfs_dentry;
-
- dentry = debugfs_create_dir("i2400m-sdio", dentry);
- result = PTR_ERR(dentry);
- if (IS_ERR(dentry)) {
- if (result == -ENODEV)
- result = 0; /* No debugfs support */
- goto error;
- }
- i2400ms->debugfs_dentry = dentry;
- __debugfs_register("dl_", main, dentry);
- __debugfs_register("dl_", tx, dentry);
- __debugfs_register("dl_", rx, dentry);
- __debugfs_register("dl_", fw, dentry);
-
- return 0;
-
-error:
- debugfs_remove_recursive(i2400ms->debugfs_dentry);
- i2400ms->debugfs_dentry = NULL;
- return result;
-}
-
-
-static struct device_type i2400ms_type = {
- .name = "wimax",
-};
-
-/*
- * Probe a i2400m interface and register it
- *
- * @func: SDIO function
- * @id: SDIO device ID
- * @returns: 0 if ok, < 0 errno code on error.
- *
- * Alloc a net device, initialize the bus-specific details and then
- * calls the bus-generic initialization routine. That will register
- * the wimax and netdev devices, upload the firmware [using
- * _bus_bm_*()], call _bus_dev_start() to finalize the setup of the
- * communication with the device and then will start to talk to it to
- * finnish setting it up.
- *
- * Initialization is tricky; some instances of the hw are packed with
- * others in a way that requires a third driver that enables the WiMAX
- * function. In those cases, we can't enable the SDIO function and
- * we'll return with -ENODEV. When the driver that enables the WiMAX
- * function does its thing, it has to do a bus_rescan_devices() on the
- * SDIO bus so this driver is called again to enumerate the WiMAX
- * function.
- */
-static
-int i2400ms_probe(struct sdio_func *func,
- const struct sdio_device_id *id)
-{
- int result;
- struct net_device *net_dev;
- struct device *dev = &func->dev;
- struct i2400m *i2400m;
- struct i2400ms *i2400ms;
-
- /* Allocate instance [calls i2400m_netdev_setup() on it]. */
- result = -ENOMEM;
- net_dev = alloc_netdev(sizeof(*i2400ms), "wmx%d",
- i2400ms_netdev_setup);
- if (net_dev == NULL) {
- dev_err(dev, "no memory for network device instance\n");
- goto error_alloc_netdev;
- }
- SET_NETDEV_DEV(net_dev, dev);
- SET_NETDEV_DEVTYPE(net_dev, &i2400ms_type);
- i2400m = net_dev_to_i2400m(net_dev);
- i2400ms = container_of(i2400m, struct i2400ms, i2400m);
- i2400m->wimax_dev.net_dev = net_dev;
- i2400ms->func = func;
- sdio_set_drvdata(func, i2400ms);
-
- i2400m->bus_tx_block_size = I2400MS_BLK_SIZE;
- /*
- * Room required in the TX queue for SDIO message to accommodate
- * a smallest payload while allocating header space is 224 bytes,
- * which is the smallest message size(the block size 256 bytes)
- * minus the smallest message header size(32 bytes).
- */
- i2400m->bus_tx_room_min = I2400MS_BLK_SIZE - I2400M_PL_ALIGN * 2;
- i2400m->bus_pl_size_max = I2400MS_PL_SIZE_MAX;
- i2400m->bus_setup = i2400ms_bus_setup;
- i2400m->bus_dev_start = i2400ms_bus_dev_start;
- i2400m->bus_dev_stop = NULL;
- i2400m->bus_release = i2400ms_bus_release;
- i2400m->bus_tx_kick = i2400ms_bus_tx_kick;
- i2400m->bus_reset = i2400ms_bus_reset;
- /* The iwmc3200-wimax sometimes requires the driver to try
- * hard when we paint it into a corner. */
- i2400m->bus_bm_retries = I2400M_SDIO_BOOT_RETRIES;
- i2400m->bus_bm_cmd_send = i2400ms_bus_bm_cmd_send;
- i2400m->bus_bm_wait_for_ack = i2400ms_bus_bm_wait_for_ack;
- i2400m->bus_fw_names = i2400ms_bus_fw_names;
- i2400m->bus_bm_mac_addr_impaired = 1;
- i2400m->bus_bm_pokes_table = &i2400ms_pokes[0];
-
- switch (func->device) {
- case SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX:
- case SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5:
- i2400ms->iwmc3200 = 1;
- break;
- default:
- i2400ms->iwmc3200 = 0;
- }
-
- result = i2400m_setup(i2400m, I2400M_BRI_NO_REBOOT);
- if (result < 0) {
- dev_err(dev, "cannot setup device: %d\n", result);
- goto error_setup;
- }
-
- result = i2400ms_debugfs_add(i2400ms);
- if (result < 0) {
- dev_err(dev, "cannot create SDIO debugfs: %d\n",
- result);
- goto error_debugfs_add;
- }
- return 0;
-
-error_debugfs_add:
- i2400m_release(i2400m);
-error_setup:
- sdio_set_drvdata(func, NULL);
- free_netdev(net_dev);
-error_alloc_netdev:
- return result;
-}
-
-
-static
-void i2400ms_remove(struct sdio_func *func)
-{
- struct device *dev = &func->dev;
- struct i2400ms *i2400ms = sdio_get_drvdata(func);
- struct i2400m *i2400m = &i2400ms->i2400m;
- struct net_device *net_dev = i2400m->wimax_dev.net_dev;
-
- d_fnstart(3, dev, "SDIO func %p\n", func);
- debugfs_remove_recursive(i2400ms->debugfs_dentry);
- i2400ms->debugfs_dentry = NULL;
- i2400m_release(i2400m);
- sdio_set_drvdata(func, NULL);
- free_netdev(net_dev);
- d_fnend(3, dev, "SDIO func %p\n", func);
-}
-
-static
-const struct sdio_device_id i2400ms_sdio_ids[] = {
- /* Intel: i2400m WiMAX (iwmc3200) over SDIO */
- { SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
- SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX) },
- { SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
- SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5) },
- { /* end: all zeroes */ },
-};
-MODULE_DEVICE_TABLE(sdio, i2400ms_sdio_ids);
-
-
-static
-struct sdio_driver i2400m_sdio_driver = {
- .name = KBUILD_MODNAME,
- .probe = i2400ms_probe,
- .remove = i2400ms_remove,
- .id_table = i2400ms_sdio_ids,
-};
-
-
-static
-int __init i2400ms_driver_init(void)
-{
- d_parse_params(D_LEVEL, D_LEVEL_SIZE, i2400ms_debug_params,
- "i2400m_sdio.debug");
- return sdio_register_driver(&i2400m_sdio_driver);
-}
-module_init(i2400ms_driver_init);
-
-
-static
-void __exit i2400ms_driver_exit(void)
-{
- sdio_unregister_driver(&i2400m_sdio_driver);
-}
-module_exit(i2400ms_driver_exit);
-
-
-MODULE_AUTHOR("Intel Corporation <linux-wimax@intel.com>");
-MODULE_DESCRIPTION("Intel 2400M WiMAX networking for SDIO");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE(I2400MS_FW_FILE_NAME);