Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits)
  [NET]: Fix and allocate less memory for ->priv'less netdevices
  [IPV6]: Fix dangling references on error in fib6_add().
  [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found
  [PKT_SCHED]: Fix datalen check in tcf_simp_init().
  [INET]: Uninline the __inet_inherit_port call.
  [INET]: Drop the inet_inherit_port() call.
  SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.
  [netdrvr] forcedeth: internal simplifications; changelog removal
  phylib: factor out get_phy_id from within get_phy_device
  PHY: add BCM5464 support to broadcom PHY driver
  cxgb3: Fix __must_check warning with dev_dbg.
  tc35815: Statistics cleanup
  natsemi: fix MMIO for PPC 44x platforms
  [TIPC]: Cleanup of TIPC reference table code
  [TIPC]: Optimized initialization of TIPC reference table
  [TIPC]: Remove inlining of reference table locking routines
  e1000: convert uint16_t style integers to u16
  ixgb: convert uint16_t style integers to u16
  sb1000.c: make const arrays static
  sb1000.c: stop inlining largish static functions
  ...

1 files changed, 48 insertions, 47 deletions

diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 79796186713..5c0d2b08275 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -48,6 +48,32 @@ static struct pci_device_id adm8211_pci_id_table[] __devinitdata = {
 	{ 0 }
 };
 
+static struct ieee80211_rate adm8211_rates[] = {
+	{ .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 220, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, /* XX ?? */
+};
+
+static const struct ieee80211_channel adm8211_channels[] = {
+	{ .center_freq = 2412},
+	{ .center_freq = 2417},
+	{ .center_freq = 2422},
+	{ .center_freq = 2427},
+	{ .center_freq = 2432},
+	{ .center_freq = 2437},
+	{ .center_freq = 2442},
+	{ .center_freq = 2447},
+	{ .center_freq = 2452},
+	{ .center_freq = 2457},
+	{ .center_freq = 2462},
+	{ .center_freq = 2467},
+	{ .center_freq = 2472},
+	{ .center_freq = 2484},
+};
+
+
 static void adm8211_eeprom_register_read(struct eeprom_93cx6 *eeprom)
 {
 	struct adm8211_priv *priv = eeprom->data;
@@ -155,17 +181,17 @@ static int adm8211_read_eeprom(struct ieee80211_hw *dev)
 	printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n",
 	       pci_name(priv->pdev), (int)chan_range.min, (int)chan_range.max);
 
-	priv->modes[0].num_channels = chan_range.max - chan_range.min + 1;
-	priv->modes[0].channels = priv->channels;
+	BUILD_BUG_ON(sizeof(priv->channels) != sizeof(adm8211_channels));
 
-	memcpy(priv->channels, adm8211_channels, sizeof(adm8211_channels));
+	memcpy(priv->channels, adm8211_channels, sizeof(priv->channels));
+	priv->band.channels = priv->channels;
+	priv->band.n_channels = ARRAY_SIZE(adm8211_channels);
+	priv->band.bitrates = adm8211_rates;
+	priv->band.n_bitrates = ARRAY_SIZE(adm8211_rates);
 
 	for (i = 1; i <= ARRAY_SIZE(adm8211_channels); i++)
-		if (i >= chan_range.min && i <= chan_range.max)
-			priv->channels[i - 1].flag =
-				IEEE80211_CHAN_W_SCAN |
-				IEEE80211_CHAN_W_ACTIVE_SCAN |
-				IEEE80211_CHAN_W_IBSS;
+		if (i < chan_range.min || i > chan_range.max)
+			priv->channels[i - 1].flags |= IEEE80211_CHAN_DISABLED;
 
 	switch (priv->eeprom->specific_bbptype) {
 	case ADM8211_BBP_RFMD3000:
@@ -347,7 +373,6 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
 	unsigned int pktlen;
 	struct sk_buff *skb, *newskb;
 	unsigned int limit = priv->rx_ring_size;
-	static const u8 rate_tbl[] = {10, 20, 55, 110, 220};
 	u8 rssi, rate;
 
 	while (!(priv->rx_ring[entry].status & cpu_to_le32(RDES0_STATUS_OWN))) {
@@ -425,12 +450,10 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
 			else
 				rx_status.ssi = 100 - rssi;
 
-			if (rate <= 4)
-				rx_status.rate = rate_tbl[rate];
+			rx_status.rate_idx = rate;
 
-			rx_status.channel = priv->channel;
-			rx_status.freq = adm8211_channels[priv->channel - 1].freq;
-			rx_status.phymode = MODE_IEEE80211B;
+			rx_status.freq = adm8211_channels[priv->channel - 1].center_freq;
+			rx_status.band = IEEE80211_BAND_2GHZ;
 
 			ieee80211_rx_irqsafe(dev, skb, &rx_status);
 		}
@@ -465,9 +488,6 @@ do {									   \
 	if (stsr & ADM8211_STSR_TCI)
 		adm8211_interrupt_tci(dev);
 
-	/*ADM8211_INT(LinkOn);*/
-	/*ADM8211_INT(LinkOff);*/
-
 	ADM8211_INT(PCF);
 	ADM8211_INT(BCNTC);
 	ADM8211_INT(GPINT);
@@ -477,7 +497,6 @@ do {									   \
 	ADM8211_INT(SQL);
 	ADM8211_INT(WEPTD);
 	ADM8211_INT(ATIME);
-	/*ADM8211_INT(TBTT);*/
 	ADM8211_INT(TEIS);
 	ADM8211_INT(FBE);
 	ADM8211_INT(REIS);
@@ -485,9 +504,6 @@ do {									   \
 	ADM8211_INT(RPS);
 	ADM8211_INT(RDU);
 	ADM8211_INT(TUF);
-	/*ADM8211_INT(TRT);*/
-	/*ADM8211_INT(TLT);*/
-	/*ADM8211_INT(TDU);*/
 	ADM8211_INT(TPS);
 
 	return IRQ_HANDLED;
@@ -1054,7 +1070,7 @@ static int adm8211_set_rate(struct ieee80211_hw *dev)
 	if (priv->pdev->revision != ADM8211_REV_BA) {
 		rate_buf[0] = ARRAY_SIZE(adm8211_rates);
 		for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++)
-			rate_buf[i + 1] = (adm8211_rates[i].rate / 5) | 0x80;
+			rate_buf[i + 1] = (adm8211_rates[i].bitrate / 5) | 0x80;
 	} else {
 		/* workaround for rev BA specific bug */
 		rate_buf[0] = 0x04;
@@ -1086,7 +1102,7 @@ static void adm8211_hw_init(struct ieee80211_hw *dev)
 	u32 reg;
 	u8 cline;
 
-	reg = le32_to_cpu(ADM8211_CSR_READ(PAR));
+	reg = ADM8211_CSR_READ(PAR);
 	reg |= ADM8211_PAR_MRLE | ADM8211_PAR_MRME;
 	reg &= ~(ADM8211_PAR_BAR | ADM8211_PAR_CAL);
 
@@ -1303,9 +1319,10 @@ static int adm8211_set_ssid(struct ieee80211_hw *dev, u8 *ssid, size_t ssid_len)
 static int adm8211_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
 {
 	struct adm8211_priv *priv = dev->priv;
+	int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
 
-	if (conf->channel != priv->channel) {
-		priv->channel = conf->channel;
+	if (channel != priv->channel) {
+		priv->channel = channel;
 		adm8211_rf_set_channel(dev, priv->channel);
 	}
 
@@ -1678,13 +1695,9 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
 	int plcp, dur, len, plcp_signal, short_preamble;
 	struct ieee80211_hdr *hdr;
 
-	if (control->tx_rate < 0) {
-		short_preamble = 1;
-		plcp_signal = -control->tx_rate;
-	} else {
-		short_preamble = 0;
-		plcp_signal = control->tx_rate;
-	}
+	short_preamble = !!(control->tx_rate->flags &
+					IEEE80211_TXCTL_SHORT_PREAMBLE);
+	plcp_signal = control->tx_rate->bitrate;
 
 	hdr = (struct ieee80211_hdr *)skb->data;
 	fc = le16_to_cpu(hdr->frame_control) & ~IEEE80211_FCTL_PROTECTED;
@@ -1880,18 +1893,11 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
 	SET_IEEE80211_PERM_ADDR(dev, perm_addr);
 
 	dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
-	dev->flags = IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED;
-	/* IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
+	/* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
 
 	dev->channel_change_time = 1000;
 	dev->max_rssi = 100;	/* FIXME: find better value */
 
-	priv->modes[0].mode = MODE_IEEE80211B;
-	/* channel info filled in by adm8211_read_eeprom */
-	memcpy(priv->rates, adm8211_rates, sizeof(adm8211_rates));
-	priv->modes[0].num_rates = ARRAY_SIZE(adm8211_rates);
-	priv->modes[0].rates = priv->rates;
-
 	dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
 
 	priv->retry_limit = 3;
@@ -1917,14 +1923,9 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
 		goto err_free_desc;
 	}
 
-	priv->channel = priv->modes[0].channels[0].chan;
+	priv->channel = 1;
 
-	err = ieee80211_register_hwmode(dev, &priv->modes[0]);
-	if (err) {
-		printk(KERN_ERR "%s (adm8211): Can't register hwmode\n",
-		       pci_name(pdev));
-		goto err_free_desc;
-	}
+	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
 
 	err = ieee80211_register_hw(dev);
 	if (err) {