ath10k: split ce pipe init/alloc further

Calling init to reinit ce pipe state would also
re-set all static structure links and setting
(which don't change over driver lifecycle).

Make it so alloc links structures and initializes
static data and init part to setup state
variables and clear stuff.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 27 insertions, 29 deletions

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 4745ef2a6f0..9b89ac13394 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -1023,37 +1023,10 @@ ath10k_ce_alloc_dest_ring(struct ath10k *ar, unsigned int ce_id,
  * initialized by software/firmware.
  */
 int ath10k_ce_init_pipe(struct ath10k *ar, unsigned int ce_id,
-			const struct ce_attr *attr,
-			void (*send_cb)(struct ath10k_ce_pipe *),
-			void (*recv_cb)(struct ath10k_ce_pipe *))
+			const struct ce_attr *attr)
 {
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id];
 	int ret;
 
-	/*
-	 * Make sure there's enough CE ringbuffer entries for HTT TX to avoid
-	 * additional TX locking checks.
-	 *
-	 * For the lack of a better place do the check here.
-	 */
-	BUILD_BUG_ON(2*TARGET_NUM_MSDU_DESC >
-		     (CE_HTT_H2T_MSG_SRC_NENTRIES - 1));
-	BUILD_BUG_ON(2*TARGET_10X_NUM_MSDU_DESC >
-		     (CE_HTT_H2T_MSG_SRC_NENTRIES - 1));
-
-	spin_lock_bh(&ar_pci->ce_lock);
-	ce_state->ar = ar;
-	ce_state->id = ce_id;
-	ce_state->ctrl_addr = ath10k_ce_base_address(ce_id);
-	ce_state->attr_flags = attr->flags;
-	ce_state->src_sz_max = attr->src_sz_max;
-	if (attr->src_nentries)
-		ce_state->send_cb = send_cb;
-	if (attr->dest_nentries)
-		ce_state->recv_cb = recv_cb;
-	spin_unlock_bh(&ar_pci->ce_lock);
-
 	if (attr->src_nentries) {
 		ret = ath10k_ce_init_src_ring(ar, ce_id, attr);
 		if (ret) {
@@ -1101,12 +1074,37 @@ void ath10k_ce_deinit_pipe(struct ath10k *ar, unsigned int ce_id)
 }
 
 int ath10k_ce_alloc_pipe(struct ath10k *ar, int ce_id,
-			 const struct ce_attr *attr)
+			 const struct ce_attr *attr,
+			 void (*send_cb)(struct ath10k_ce_pipe *),
+			 void (*recv_cb)(struct ath10k_ce_pipe *))
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id];
 	int ret;
 
+	/*
+	 * Make sure there's enough CE ringbuffer entries for HTT TX to avoid
+	 * additional TX locking checks.
+	 *
+	 * For the lack of a better place do the check here.
+	 */
+	BUILD_BUG_ON(2*TARGET_NUM_MSDU_DESC >
+		     (CE_HTT_H2T_MSG_SRC_NENTRIES - 1));
+	BUILD_BUG_ON(2*TARGET_10X_NUM_MSDU_DESC >
+		     (CE_HTT_H2T_MSG_SRC_NENTRIES - 1));
+
+	ce_state->ar = ar;
+	ce_state->id = ce_id;
+	ce_state->ctrl_addr = ath10k_ce_base_address(ce_id);
+	ce_state->attr_flags = attr->flags;
+	ce_state->src_sz_max = attr->src_sz_max;
+
+	if (attr->src_nentries)
+		ce_state->send_cb = send_cb;
+
+	if (attr->dest_nentries)
+		ce_state->recv_cb = recv_cb;
+
 	if (attr->src_nentries) {
 		ce_state->src_ring = ath10k_ce_alloc_src_ring(ar, ce_id, attr);
 		if (IS_ERR(ce_state->src_ring)) {