diff options
| author | Bruno Randolf <br1@einfach.org> | 2010-04-02 18:44:08 +0900 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2010-04-07 14:37:53 -0400 |
| commit | 2111ac0d888767999c7dd6d1309dcc1fb8012022 (patch) | |
| tree | 1d388cf94a88790a527a5e695081fb3508127a3a /drivers/net/wireless/ath/ath5k/pcu.c | |
| parent | bc53e5129ce879ba024b7d21981871ea63a37b42 (diff) | |
ath5k: Adaptive Noise Immunity (ANI) Implementation
This is an Adaptive Noise Imunity (ANI) implementation for ath5k. I have looked
at both ath9k and HAL sources (they are nearly the same), and even though i
have implemented some things differently, the basic algorithm is practically
the same, for now. I hope that this can serve as a clean start to improve the
algorithm later.
This also adds a possibility to manually control ANI settings, right now only
thru a debugfs file:
* set lowest sensitivity (=highest noise immunity):
echo sens-low > /sys/kernel/debug/ath5k/phy0/ani
* set highest sensitivity (=lowest noise immunity):
echo sens-high > /sys/kernel/debug/ath5k/phy0/ani
* automatically control immunity (default):
echo ani-on > /sys/kernel/debug/ath5k/phy0/ani
* to see the parameters in use and watch them change:
cat /sys/kernel/debug/ath5k/phy0/ani
Manually setting sensitivity will turn the automatic control off. You can also
control each of the five immunity parameters (noise immunity, spur immunity,
firstep, ofdm weak signal detection, cck weak signal detection) manually thru
the debugfs file.
This is tested on AR5414 and nearly doubles the thruput in a noisy 2GHz band.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/pcu.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/pcu.c | 1 |
1 files changed, 0 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index c7c1fe02372..710870ea179 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -379,7 +379,6 @@ void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) * (ACK etc). * * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma - * TODO: Init ANI here */ void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) { |