summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath5k/pcu.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-06 17:22:09 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-06 17:22:09 -0800
commit9753dfe19a85e7e45a34a56f4cb2048bb4f50e27 (patch)
treec017a1b4a70b8447c71b01d8b320e071546b5c9d /drivers/net/wireless/ath/ath5k/pcu.c
parentedf7c8148ec40c0fd27c0ef3f688defcc65e3913 (diff)
parent9f42f126154786e6e76df513004800c8c633f020 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1958 commits) net: pack skb_shared_info more efficiently net_sched: red: split red_parms into parms and vars net_sched: sfq: extend limits cnic: Improve error recovery on bnx2x devices cnic: Re-init dev->stats_addr after chip reset net_sched: Bug in netem reordering bna: fix sparse warnings/errors bna: make ethtool_ops and strings const xgmac: cleanups net: make ethtool_ops const vmxnet3" make ethtool ops const xen-netback: make ops structs const virtio_net: Pass gfp flags when allocating rx buffers. ixgbe: FCoE: Add support for ndo_get_fcoe_hbainfo() call netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call igb: reset PHY after recovering from PHY power down igb: add basic runtime PM support igb: Add support for byte queue limits. e1000: cleanup CE4100 MDIO registers access e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove ...
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/pcu.c')
-rw-r--r--drivers/net/wireless/ath/ath5k/pcu.c222
1 files changed, 147 insertions, 75 deletions
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index a7eafa3edc2..cebfd6fd31d 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -30,11 +30,47 @@
#include "reg.h"
#include "debug.h"
-/*
+/**
+ * DOC: Protocol Control Unit (PCU) functions
+ *
+ * Protocol control unit is responsible to maintain various protocol
+ * properties before a frame is send and after a frame is received to/from
+ * baseband. To be more specific, PCU handles:
+ *
+ * - Buffering of RX and TX frames (after QCU/DCUs)
+ *
+ * - Encrypting and decrypting (using the built-in engine)
+ *
+ * - Generating ACKs, RTS/CTS frames
+ *
+ * - Maintaining TSF
+ *
+ * - FCS
+ *
+ * - Updating beacon data (with TSF etc)
+ *
+ * - Generating virtual CCA
+ *
+ * - RX/Multicast filtering
+ *
+ * - BSSID filtering
+ *
+ * - Various statistics
+ *
+ * -Different operating modes: AP, STA, IBSS
+ *
+ * Note: Most of these functions can be tweaked/bypassed so you can do
+ * them on sw above for debugging or research. For more infos check out PCU
+ * registers on reg.h.
+ */
+
+/**
+ * DOC: ACK rates
+ *
* AR5212+ can use higher rates for ack transmission
* based on current tx rate instead of the base rate.
* It does this to better utilize channel usage.
- * This is a mapping between G rates (that cover both
+ * There is a mapping between G rates (that cover both
* CCK and OFDM) and ack rates that we use when setting
* rate -> duration table. This mapping is hw-based so
* don't change anything.
@@ -63,17 +99,18 @@ static const unsigned int ack_rates_high[] =
\*******************/
/**
- * ath5k_hw_get_frame_duration - Get tx time of a frame
- *
+ * ath5k_hw_get_frame_duration() - Get tx time of a frame
* @ah: The &struct ath5k_hw
* @len: Frame's length in bytes
* @rate: The @struct ieee80211_rate
+ * @shortpre: Indicate short preample
*
* Calculate tx duration of a frame given it's rate and length
* It extends ieee80211_generic_frame_duration for non standard
* bwmodes.
*/
-int ath5k_hw_get_frame_duration(struct ath5k_hw *ah,
+int
+ath5k_hw_get_frame_duration(struct ath5k_hw *ah,
int len, struct ieee80211_rate *rate, bool shortpre)
{
int sifs, preamble, plcp_bits, sym_time;
@@ -129,11 +166,11 @@ int ath5k_hw_get_frame_duration(struct ath5k_hw *ah,
}
/**
- * ath5k_hw_get_default_slottime - Get the default slot time for current mode
- *
+ * ath5k_hw_get_default_slottime() - Get the default slot time for current mode
* @ah: The &struct ath5k_hw
*/
-unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah)
+unsigned int
+ath5k_hw_get_default_slottime(struct ath5k_hw *ah)
{
struct ieee80211_channel *channel = ah->ah_current_channel;
unsigned int slot_time;
@@ -160,11 +197,11 @@ unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah)
}
/**
- * ath5k_hw_get_default_sifs - Get the default SIFS for current mode
- *
+ * ath5k_hw_get_default_sifs() - Get the default SIFS for current mode
* @ah: The &struct ath5k_hw
*/
-unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah)
+unsigned int
+ath5k_hw_get_default_sifs(struct ath5k_hw *ah)
{
struct ieee80211_channel *channel = ah->ah_current_channel;
unsigned int sifs;
@@ -191,17 +228,17 @@ unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah)
}
/**
- * ath5k_hw_update_mib_counters - Update MIB counters (mac layer statistics)
- *
+ * ath5k_hw_update_mib_counters() - Update MIB counters (mac layer statistics)
* @ah: The &struct ath5k_hw
*
* Reads MIB counters from PCU and updates sw statistics. Is called after a
* MIB interrupt, because one of these counters might have reached their maximum
* and triggered the MIB interrupt, to let us read and clear the counter.
*
- * Is called in interrupt context!
+ * NOTE: Is called in interrupt context!
*/
-void ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
+void
+ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
{
struct ath5k_statistics *stats = &ah->stats;
@@ -219,10 +256,8 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
\******************/
/**
- * ath5k_hw_write_rate_duration - fill rate code to duration table
- *
- * @ah: the &struct ath5k_hw
- * @mode: one of enum ath5k_driver_mode
+ * ath5k_hw_write_rate_duration() - Fill rate code to duration table
+ * @ah: The &struct ath5k_hw
*
* Write the rate code to duration table upon hw reset. This is a helper for
* ath5k_hw_pcu_init(). It seems all this is doing is setting an ACK timeout on
@@ -236,7 +271,8 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
* that include all OFDM and CCK rates.
*
*/
-static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah)
+static inline void
+ath5k_hw_write_rate_duration(struct ath5k_hw *ah)
{
struct ieee80211_rate *rate;
unsigned int i;
@@ -280,12 +316,12 @@ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah)
}
/**
- * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU
- *
+ * ath5k_hw_set_ack_timeout() - Set ACK timeout on PCU
* @ah: The &struct ath5k_hw
* @timeout: Timeout in usec
*/
-static int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
+static int
+ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
{
if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK))
<= timeout)
@@ -298,12 +334,12 @@ static int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
}
/**
- * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU
- *
+ * ath5k_hw_set_cts_timeout() - Set CTS timeout on PCU
* @ah: The &struct ath5k_hw
* @timeout: Timeout in usec
*/
-static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
+static int
+ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
{
if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS))
<= timeout)
@@ -321,14 +357,14 @@ static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
\*******************/
/**
- * ath5k_hw_set_lladdr - Set station id
- *
+ * ath5k_hw_set_lladdr() - Set station id
* @ah: The &struct ath5k_hw
- * @mac: The card's mac address
+ * @mac: The card's mac address (array of octets)
*
* Set station id on hw using the provided mac address
*/
-int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
+int
+ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
{
struct ath_common *common = ath5k_hw_common(ah);
u32 low_id, high_id;
@@ -349,14 +385,14 @@ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
}
/**
- * ath5k_hw_set_bssid - Set current BSSID on hw
- *
+ * ath5k_hw_set_bssid() - Set current BSSID on hw
* @ah: The &struct ath5k_hw
*
* Sets the current BSSID and BSSID mask we have from the
* common struct into the hardware
*/
-void ath5k_hw_set_bssid(struct ath5k_hw *ah)
+void
+ath5k_hw_set_bssid(struct ath5k_hw *ah)
{
struct ath_common *common = ath5k_hw_common(ah);
u16 tim_offset = 0;
@@ -389,7 +425,23 @@ void ath5k_hw_set_bssid(struct ath5k_hw *ah)
ath5k_hw_enable_pspoll(ah, NULL, 0);
}
-void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+/**
+ * ath5k_hw_set_bssid_mask() - Filter out bssids we listen
+ * @ah: The &struct ath5k_hw
+ * @mask: The BSSID mask to set (array of octets)
+ *
+ * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode and AP mode with a single
+ * BSS every bit matters since we lock to only one BSS. In AP mode with
+ * multiple BSSes (virtual interfaces) not every bit matters because hw must
+ * accept frames for all BSSes and so we tweak some bits of our mac address
+ * in order to have multiple BSSes.
+ *
+ * For more information check out ../hw.c of the common ath module.
+ */
+void
+ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
{
struct ath_common *common = ath5k_hw_common(ah);
@@ -400,18 +452,21 @@ void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
ath_hw_setbssidmask(common);
}
-/*
- * Set multicast filter
+/**
+ * ath5k_hw_set_mcast_filter() - Set multicast filter
+ * @ah: The &struct ath5k_hw
+ * @filter0: Lower 32bits of muticast filter
+ * @filter1: Higher 16bits of multicast filter
*/
-void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
+void
+ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
{
ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
}
/**
- * ath5k_hw_get_rx_filter - Get current rx filter
- *
+ * ath5k_hw_get_rx_filter() - Get current rx filter
* @ah: The &struct ath5k_hw
*
* Returns the RX filter by reading rx filter and
@@ -420,7 +475,8 @@ void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
* and pass to the driver. For a list of frame types
* check out reg.h.
*/
-u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
+u32
+ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
{
u32 data, filter = 0;
@@ -440,8 +496,7 @@ u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
}
/**
- * ath5k_hw_set_rx_filter - Set rx filter
- *
+ * ath5k_hw_set_rx_filter() - Set rx filter
* @ah: The &struct ath5k_hw
* @filter: RX filter mask (see reg.h)
*
@@ -449,7 +504,8 @@ u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
* register on 5212 and newer chips so that we have proper PHY
* error reporting.
*/
-void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
+void
+ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
{
u32 data = 0;
@@ -493,13 +549,13 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
#define ATH5K_MAX_TSF_READ 10
/**
- * ath5k_hw_get_tsf64 - Get the full 64bit TSF
- *
+ * ath5k_hw_get_tsf64() - Get the full 64bit TSF
* @ah: The &struct ath5k_hw
*
* Returns the current TSF
*/
-u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
+u64
+ath5k_hw_get_tsf64(struct ath5k_hw *ah)
{
u32 tsf_lower, tsf_upper1, tsf_upper2;
int i;
@@ -536,28 +592,30 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
return ((u64)tsf_upper1 << 32) | tsf_lower;
}
+#undef ATH5K_MAX_TSF_READ
+
/**
- * ath5k_hw_set_tsf64 - Set a new 64bit TSF
- *
+ * ath5k_hw_set_tsf64() - Set a new 64bit TSF
* @ah: The &struct ath5k_hw
* @tsf64: The new 64bit TSF
*
* Sets the new TSF
*/
-void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64)
+void
+ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64)
{
ath5k_hw_reg_write(ah, tsf64 & 0xffffffff, AR5K_TSF_L32);
ath5k_hw_reg_write(ah, (tsf64 >> 32) & 0xffffffff, AR5K_TSF_U32);
}
/**
- * ath5k_hw_reset_tsf - Force a TSF reset
- *
+ * ath5k_hw_reset_tsf() - Force a TSF reset
* @ah: The &struct ath5k_hw
*
* Forces a TSF reset on PCU
*/
-void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
+void
+ath5k_hw_reset_tsf(struct ath5k_hw *ah)
{
u32 val;
@@ -573,10 +631,17 @@ void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
ath5k_hw_reg_write(ah, val, AR5K_BEACON);
}
-/*
- * Initialize beacon timers
+/**
+ * ath5k_hw_init_beacon_timers() - Initialize beacon timers
+ * @ah: The &struct ath5k_hw
+ * @next_beacon: Next TBTT
+ * @interval: Current beacon interval
+ *
+ * This function is used to initialize beacon timers based on current
+ * operation mode and settings.
*/
-void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
+void
+ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
{
u32 timer1, timer2, timer3;
@@ -655,8 +720,7 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
}
/**
- * ath5k_check_timer_win - Check if timer B is timer A + window
- *
+ * ath5k_check_timer_win() - Check if timer B is timer A + window
* @a: timer a (before b)
* @b: timer b (after a)
* @window: difference between a and b
@@ -686,12 +750,11 @@ ath5k_check_timer_win(int a, int b, int window, int intval)
}
/**
- * ath5k_hw_check_beacon_timers - Check if the beacon timers are correct
- *
+ * ath5k_hw_check_beacon_timers() - Check if the beacon timers are correct
* @ah: The &struct ath5k_hw
* @intval: beacon interval
*
- * This is a workaround for IBSS mode:
+ * This is a workaround for IBSS mode
*
* The need for this function arises from the fact that we have 4 separate
* HW timer registers (TIMER0 - TIMER3), which are closely related to the
@@ -746,14 +809,14 @@ ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval)
}
/**
- * ath5k_hw_set_coverage_class - Set IEEE 802.11 coverage class
- *
+ * ath5k_hw_set_coverage_class() - Set IEEE 802.11 coverage class
* @ah: The &struct ath5k_hw
* @coverage_class: IEEE 802.11 coverage class number
*
* Sets IFS intervals and ACK/CTS timeouts for given coverage class.
*/
-void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
+void
+ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
{
/* As defined by IEEE 802.11-2007 17.3.8.6 */
int slot_time = ath5k_hw_get_default_slottime(ah) + 3 * coverage_class;
@@ -772,8 +835,7 @@ void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
\***************************/
/**
- * ath5k_hw_start_rx_pcu - Start RX engine
- *
+ * ath5k_hw_start_rx_pcu() - Start RX engine
* @ah: The &struct ath5k_hw
*
* Starts RX engine on PCU so that hw can process RXed frames
@@ -781,32 +843,33 @@ void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
*
* NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
*/
-void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
+void
+ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
{
AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
}
/**
- * at5k_hw_stop_rx_pcu - Stop RX engine
- *
+ * at5k_hw_stop_rx_pcu() - Stop RX engine
* @ah: The &struct ath5k_hw
*
* Stops RX engine on PCU
*/
-void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
+void
+ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
{
AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
}
/**
- * ath5k_hw_set_opmode - Set PCU operating mode
- *
+ * ath5k_hw_set_opmode() - Set PCU operating mode
* @ah: The &struct ath5k_hw
- * @op_mode: &enum nl80211_iftype operating mode
+ * @op_mode: One of enum nl80211_iftype
*
* Configure PCU for the various operating modes (AP/STA etc)
*/
-int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
+int
+ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
{
struct ath_common *common = ath5k_hw_common(ah);
u32 pcu_reg, beacon_reg, low_id, high_id;
@@ -873,8 +936,17 @@ int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
return 0;
}
-void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
- u8 mode)
+/**
+ * ath5k_hw_pcu_init() - Initialize PCU
+ * @ah: The &struct ath5k_hw
+ * @op_mode: One of enum nl80211_iftype
+ * @mode: One of enum ath5k_driver_mode
+ *
+ * This function is used to initialize PCU by setting current
+ * operation mode and various other settings.
+ */
+void
+ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
{
/* Set bssid and bssid mask */
ath5k_hw_set_bssid(ah);