summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath5k/phy.c
diff options
context:
space:
mode:
authorNick Kossifidis <mickflemm@gmail.com>2011-11-25 20:40:25 +0200
committerJohn W. Linville <linville@tuxdriver.com>2011-11-28 14:44:16 -0500
commitc47faa364cfb249d5d7670fb7293a6f9acd8aa9e (patch)
tree6b81c368508e94966efec2ddcc412c6b2154a97e /drivers/net/wireless/ath/ath5k/phy.c
parent1846ac3dbec0894095520b2756b68c4fd81e3fbb (diff)
ath5k: Cleanups v2 + add kerneldoc on all hw functions
No functional changes Add kernel doc for all ath5k_hw_* functions and strcucts. Also do some cleanup, rename ath5k_hw_init_beacon to ath5k_hw_init_beacon_timers, remove an unused variable from ath5k_hw_pcu_init and a few obsolete macros, mostly related to XR. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/phy.c')
-rw-r--r--drivers/net/wireless/ath/ath5k/phy.c748
1 files changed, 606 insertions, 142 deletions
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index bf097b118bd..a635441d1fe 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1,6 +1,4 @@
/*
- * PHY functions
- *
* Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
* Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
* Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
@@ -20,6 +18,10 @@
*
*/
+/***********************\
+* PHY related functions *
+\***********************/
+
#include <linux/delay.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
@@ -31,14 +33,53 @@
#include "../regd.h"
+/**
+ * DOC: PHY related functions
+ *
+ * Here we handle the low-level functions related to baseband
+ * and analog frontend (RF) parts. This is by far the most complex
+ * part of the hw code so make sure you know what you are doing.
+ *
+ * Here is a list of what this is all about:
+ *
+ * - Channel setting/switching
+ *
+ * - Automatic Gain Control (AGC) calibration
+ *
+ * - Noise Floor calibration
+ *
+ * - I/Q imbalance calibration (QAM correction)
+ *
+ * - Calibration due to thermal changes (gain_F)
+ *
+ * - Spur noise mitigation
+ *
+ * - RF/PHY initialization for the various operating modes and bwmodes
+ *
+ * - Antenna control
+ *
+ * - TX power control per channel/rate/packet type
+ *
+ * Also have in mind we never got documentation for most of these
+ * functions, what we have comes mostly from Atheros's code, reverse
+ * engineering and patent docs/presentations etc.
+ */
+
+
/******************\
* Helper functions *
\******************/
-/*
- * Get the PHY Chip revision
+/**
+ * ath5k_hw_radio_revision() - Get the PHY Chip revision
+ * @ah: The &struct ath5k_hw
+ * @band: One of enum ieee80211_band
+ *
+ * Returns the revision number of a 2GHz, 5GHz or single chip
+ * radio.
*/
-u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band)
+u16
+ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band)
{
unsigned int i;
u32 srev;
@@ -81,10 +122,16 @@ u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band)
return ret;
}
-/*
- * Check if a channel is supported
+/**
+ * ath5k_channel_ok() - Check if a channel is supported by the hw
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Note: We don't do any regulatory domain checks here, it's just
+ * a sanity check.
*/
-bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel)
+bool
+ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel)
{
u16 freq = channel->center_freq;
@@ -101,7 +148,13 @@ bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel)
return false;
}
-bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+/**
+ * ath5k_hw_chan_has_spur_noise() - Check if channel is sensitive to spur noise
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ */
+bool
+ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
u8 refclk_freq;
@@ -122,11 +175,20 @@ bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
return false;
}
-/*
- * Used to modify RF Banks before writing them to AR5K_RF_BUFFER
+/**
+ * ath5k_hw_rfb_op() - Perform an operation on the given RF Buffer
+ * @ah: The &struct ath5k_hw
+ * @rf_regs: The struct ath5k_rf_reg
+ * @val: New value
+ * @reg_id: RF register ID
+ * @set: Indicate we need to swap data
+ *
+ * This is an internal function used to modify RF Banks before
+ * writing them to AR5K_RF_BUFFER. Check out rfbuffer.h for more
+ * infos.
*/
-static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
- const struct ath5k_rf_reg *rf_regs,
+static unsigned int
+ath5k_hw_rfb_op(struct ath5k_hw *ah, const struct ath5k_rf_reg *rf_regs,
u32 val, u8 reg_id, bool set)
{
const struct ath5k_rf_reg *rfreg = NULL;
@@ -204,8 +266,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
}
/**
- * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
- *
+ * ath5k_hw_write_ofdm_timings() - set OFDM timings on AR5212
* @ah: the &struct ath5k_hw
* @channel: the currently set channel upon reset
*
@@ -216,10 +277,11 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
* mantissa and provide these values on hw.
*
* For more infos i think this patent is related
- * http://www.freepatentsonline.com/7184495.html
+ * "http://www.freepatentsonline.com/7184495.html"
*/
-static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
- struct ieee80211_channel *channel)
+static inline int
+ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
{
/* Get exponent and mantissa and set it */
u32 coef_scaled, coef_exp, coef_man,
@@ -278,6 +340,10 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
return 0;
}
+/**
+ * ath5k_hw_phy_disable() - Disable PHY
+ * @ah: The &struct ath5k_hw
+ */
int ath5k_hw_phy_disable(struct ath5k_hw *ah)
{
/*Just a try M.F.*/
@@ -286,10 +352,13 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah)
return 0;
}
-/*
- * Wait for synth to settle
+/**
+ * ath5k_hw_wait_for_synth() - Wait for synth to settle
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
*/
-static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
+static void
+ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
/*
@@ -319,7 +388,9 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
* RF Gain optimization *
\**********************/
-/*
+/**
+ * DOC: RF Gain optimization
+ *
* This code is used to optimize RF gain on different environments
* (temperature mostly) based on feedback from a power detector.
*
@@ -328,19 +399,22 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
* no gain optimization ladder-.
*
* For more infos check out this patent doc
- * http://www.freepatentsonline.com/7400691.html
+ * "http://www.freepatentsonline.com/7400691.html"
*
* This paper describes power drops as seen on the receiver due to
* probe packets
- * http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues
- * %20of%20Power%20Control.pdf
+ * "http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues
+ * %20of%20Power%20Control.pdf"
*
* And this is the MadWiFi bug entry related to the above
- * http://madwifi-project.org/ticket/1659
+ * "http://madwifi-project.org/ticket/1659"
* with various measurements and diagrams
*/
-/* Initialize ah_gain during attach */
+/**
+ * ath5k_hw_rfgain_opt_init() - Initialize ah_gain during attach
+ * @ah: The &struct ath5k_hw
+ */
int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
{
/* Initialize the gain optimization values */
@@ -364,7 +438,11 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
return 0;
}
-/* Schedule a gain probe check on the next transmitted packet.
+/**
+ * ath5k_hw_request_rfgain_probe() - Request a PAPD probe packet
+ * @ah: The &struct ath5k_hw
+ *
+ * Schedules a gain probe check on the next transmitted packet.
* That means our next packet is going to be sent with lower
* tx power and a Peak to Average Power Detector (PAPD) will try
* to measure the gain.
@@ -373,7 +451,8 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
* just after we enable the probe so that we don't mess with
* standard traffic.
*/
-static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
+static void
+ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
{
/* Skip if gain calibration is inactive or
@@ -391,9 +470,15 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
}
-/* Calculate gain_F measurement correction
- * based on the current step for RF5112 rev. 2 */
-static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah)
+/**
+ * ath5k_hw_rf_gainf_corr() - Calculate Gain_F measurement correction
+ * @ah: The &struct ath5k_hw
+ *
+ * Calculate Gain_F measurement correction
+ * based on the current step for RF5112 rev. 2
+ */
+static u32
+ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah)
{
u32 mix, step;
u32 *rf;
@@ -446,11 +531,19 @@ static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah)
return ah->ah_gain.g_f_corr;
}
-/* Check if current gain_F measurement is in the range of our
+/**
+ * ath5k_hw_rf_check_gainf_readback() - Validate Gain_F feedback from detector
+ * @ah: The &struct ath5k_hw
+ *
+ * Check if current gain_F measurement is in the range of our
* power detector windows. If we get a measurement outside range
* we know it's not accurate (detectors can't measure anything outside
- * their detection window) so we must ignore it */
-static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)
+ * their detection window) so we must ignore it.
+ *
+ * Returns true if readback was O.K. or false on failure
+ */
+static bool
+ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)
{
const struct ath5k_rf_reg *rf_regs;
u32 step, mix_ovr, level[4];
@@ -502,9 +595,15 @@ static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)
ah->ah_gain.g_current <= level[3]);
}
-/* Perform gain_F adjustment by choosing the right set
- * of parameters from RF gain optimization ladder */
-static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah)
+/**
+ * ath5k_hw_rf_gainf_adjust() - Perform Gain_F adjustment
+ * @ah: The &struct ath5k_hw
+ *
+ * Choose the right target gain based on current gain
+ * and RF gain optimization ladder
+ */
+static s8
+ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah)
{
const struct ath5k_gain_opt *go;
const struct ath5k_gain_opt_step *g_step;
@@ -568,11 +667,18 @@ done:
return ret;
}
-/* Main callback for thermal RF gain calibration engine
+/**
+ * ath5k_hw_gainf_calibrate() - Do a gain_F calibration
+ * @ah: The &struct ath5k_hw
+ *
+ * Main callback for thermal RF gain calibration engine
* Check for a new gain reading and schedule an adjustment
* if needed.
+ *
+ * Returns one of enum ath5k_rfgain codes
*/
-enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah)
+enum ath5k_rfgain
+ath5k_hw_gainf_calibrate(struct ath5k_hw *ah)
{
u32 data, type;
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
@@ -632,10 +738,18 @@ done:
return ah->ah_gain.g_state;
}
-/* Write initial RF gain table to set the RF sensitivity
- * this one works on all RF chips and has nothing to do
- * with gain_F calibration */
-static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band)
+/**
+ * ath5k_hw_rfgain_init() - Write initial RF gain settings to hw
+ * @ah: The &struct ath5k_hw
+ * @band: One of enum ieee80211_band
+ *
+ * Write initial RF gain table to set the RF sensitivity.
+ *
+ * NOTE: This one works on all RF chips and has nothing to do
+ * with Gain_F calibration
+ */
+static int
+ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band)
{
const struct ath5k_ini_rfgain *ath5k_rfg;
unsigned int i, size, index;
@@ -682,16 +796,23 @@ static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band)
}
-
/********************\
* RF Registers setup *
\********************/
-/*
- * Setup RF registers by writing RF buffer on hw
+/**
+ * ath5k_hw_rfregs_init() - Initialize RF register settings
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @mode: One of enum ath5k_driver_mode
+ *
+ * Setup RF registers by writing RF buffer on hw. For
+ * more infos on this, check out rfbuffer.h
*/
-static int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
- struct ieee80211_channel *channel, unsigned int mode)
+static int
+ath5k_hw_rfregs_init(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ unsigned int mode)
{
const struct ath5k_rf_reg *rf_regs;
const struct ath5k_ini_rfbuffer *ini_rfb;
@@ -1049,19 +1170,18 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
PHY/RF channel functions
\**************************/
-/*
- * Conversion needed for RF5110
+/**
+ * ath5k_hw_rf5110_chan2athchan() - Convert channel freq on RF5110
+ * @channel: The &struct ieee80211_channel
+ *
+ * Map channel frequency to IEEE channel number and convert it
+ * to an internal channel value used by the RF5110 chipset.
*/
-static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
+static u32
+ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
{
u32 athchan;
- /*
- * Convert IEEE channel/MHz to an internal channel value used
- * by the AR5210 chipset. This has not been verified with
- * newer chipsets like the AR5212A who have a completely
- * different RF/PHY part.
- */
athchan = (ath5k_hw_bitswap(
(ieee80211_frequency_to_channel(
channel->center_freq) - 24) / 2, 5)
@@ -1069,10 +1189,13 @@ static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
return athchan;
}
-/*
- * Set channel on RF5110
+/**
+ * ath5k_hw_rf5110_channel() - Set channel frequency on RF5110
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
*/
-static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
+static int
+ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
u32 data;
@@ -1088,10 +1211,18 @@ static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
return 0;
}
-/*
- * Conversion needed for 5111
+/**
+ * ath5k_hw_rf5111_chan2athchan() - Handle 2GHz channels on RF5111/2111
+ * @ieee: IEEE channel number
+ * @athchan: The &struct ath5k_athchan_2ghz
+ *
+ * In order to enable the RF2111 frequency converter on RF5111/2111 setups
+ * we need to add some offsets and extra flags to the data values we pass
+ * on to the PHY. So for every 2GHz channel this function gets called
+ * to do the conversion.
*/
-static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
+static int
+ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
struct ath5k_athchan_2ghz *athchan)
{
int channel;
@@ -1117,10 +1248,13 @@ static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
return 0;
}
-/*
- * Set channel on 5111
+/**
+ * ath5k_hw_rf5111_channel() - Set channel frequency on RF5111/2111
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
*/
-static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah,
+static int
+ath5k_hw_rf5111_channel(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
struct ath5k_athchan_2ghz ath5k_channel_2ghz;
@@ -1165,10 +1299,20 @@ static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah,
return 0;
}
-/*
- * Set channel on 5112 and newer
+/**
+ * ath5k_hw_rf5112_channel() - Set channel frequency on 5112 and newer
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * On RF5112/2112 and newer we don't need to do any conversion.
+ * We pass the frequency value after a few modifications to the
+ * chip directly.
+ *
+ * NOTE: Make sure channel frequency given is within our range or else
+ * we might damage the chip ! Use ath5k_channel_ok before calling this one.
*/
-static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
+static int
+ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
u32 data, data0, data1, data2;
@@ -1177,17 +1321,37 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
data = data0 = data1 = data2 = 0;
c = channel->center_freq;
+ /* My guess based on code:
+ * 2GHz RF has 2 synth modes, one with a Local Oscillator
+ * at 2224Hz and one with a LO at 2192Hz. IF is 1520Hz
+ * (3040/2). data0 is used to set the PLL divider and data1
+ * selects synth mode. */
if (c < 4800) {
+ /* Channel 14 and all frequencies with 2Hz spacing
+ * below/above (non-standard channels) */
if (!((c - 2224) % 5)) {
+ /* Same as (c - 2224) / 5 */
data0 = ((2 * (c - 704)) - 3040) / 10;
data1 = 1;
+ /* Channel 1 and all frequencies with 5Hz spacing
+ * below/above (standard channels without channel 14) */
} else if (!((c - 2192) % 5)) {
+ /* Same as (c - 2192) / 5 */
data0 = ((2 * (c - 672)) - 3040) / 10;
data1 = 0;
} else
return -EINVAL;
data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8);
+ /* This is more complex, we have a single synthesizer with
+ * 4 reference clock settings (?) based on frequency spacing
+ * and set using data2. LO is at 4800Hz and data0 is again used
+ * to set some divider.
+ *
+ * NOTE: There is an old atheros presentation at Stanford
+ * that mentions a method called dual direct conversion
+ * with 1GHz sliding IF for RF5110. Maybe that's what we
+ * have here, or an updated version. */
} else if ((c % 5) != 2 || c > 5435) {
if (!(c % 20) && c >= 5120) {
data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8);
@@ -1213,10 +1377,16 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
return 0;
}
-/*
- * Set the channel on the RF2425
+/**
+ * ath5k_hw_rf2425_channel() - Set channel frequency on RF2425
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * AR2425/2417 have a different 2GHz RF so code changes
+ * a little bit from RF5112.
*/
-static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah,
+static int
+ath5k_hw_rf2425_channel(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
u32 data, data0, data2;
@@ -1252,10 +1422,16 @@ static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah,
return 0;
}
-/*
- * Set a channel on the radio chip
+/**
+ * ath5k_hw_channel() - Set a channel on the radio chip
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * This is the main function called to set a channel on the
+ * radio chip based on the radio chip version.
*/
-static int ath5k_hw_channel(struct ath5k_hw *ah,
+static int
+ath5k_hw_channel(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
int ret;
@@ -1307,11 +1483,46 @@ static int ath5k_hw_channel(struct ath5k_hw *ah,
return 0;
}
+
/*****************\
PHY calibration
\*****************/
-static s32 ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah)
+/**
+ * DOC: PHY Calibration routines
+ *
+ * Noise floor calibration: When we tell the hardware to
+ * perform a noise floor calibration by setting the
+ * AR5K_PHY_AGCCTL_NF bit on AR5K_PHY_AGCCTL, it will periodically
+ * sample-and-hold the minimum noise level seen at the antennas.
+ * This value is then stored in a ring buffer of recently measured
+ * noise floor values so we have a moving window of the last few
+ * samples. The median of the values in the history is then loaded
+ * into the hardware for its own use for RSSI and CCA measurements.
+ * This type of calibration doesn't interfere with traffic.
+ *
+ * AGC calibration: When we tell the hardware to perform
+ * an AGC (Automatic Gain Control) calibration by setting the
+ * AR5K_PHY_AGCCTL_CAL, hw disconnects the antennas and does
+ * a calibration on the DC offsets of ADCs. During this period
+ * rx/tx gets disabled so we have to deal with it on the driver
+ * part.
+ *
+ * I/Q calibration: When we tell the hardware to perform
+ * an I/Q calibration, it tries to correct I/Q imbalance and
+ * fix QAM constellation by sampling data from rxed frames.
+ * It doesn't interfere with traffic.
+ *
+ * For more infos on AGC and I/Q calibration check out patent doc
+ * #03/094463.
+ */
+
+/**
+ * ath5k_hw_read_measured_noise_floor() - Read measured NF from hw
+ * @ah: The &struct ath5k_hw
+ */
+static s32
+ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah)
{
s32 val;
@@ -1319,7 +1530,12 @@ static s32 ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah)
return sign_extend32(AR5K_REG_MS(val, AR5K_PHY_NF_MINCCA_PWR), 8);
}
-void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah)
+/**
+ * ath5k_hw_init_nfcal_hist() - Initialize NF calibration history buffer
+ * @ah: The &struct ath5k_hw
+ */
+void
+ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah)
{
int i;
@@ -1328,6 +1544,11 @@ void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah)
ah->ah_nfcal_hist.nfval[i] = AR5K_TUNE_CCA_MAX_GOOD_VALUE;
}
+/**
+ * ath5k_hw_update_nfcal_hist() - Update NF calibration history buffer
+ * @ah: The &struct ath5k_hw
+ * @noise_floor: The NF we got from hw
+ */
static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor)
{
struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist;
@@ -1335,7 +1556,12 @@ static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor)
hist->nfval[hist->index] = noise_floor;
}
-static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah)
+/**
+ * ath5k_hw_get_median_noise_floor() - Get median NF from history buffer
+ * @ah: The &struct ath5k_hw
+ */
+static s16
+ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah)
{
s16 sort[ATH5K_NF_CAL_HIST_MAX];
s16 tmp;
@@ -1358,18 +1584,16 @@ static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah)
return sort[(ATH5K_NF_CAL_HIST_MAX - 1) / 2];
}
-/*
- * When we tell the hardware to perform a noise floor calibration
- * by setting the AR5K_PHY_AGCCTL_NF bit, it will periodically
- * sample-and-hold the minimum noise level seen at the antennas.
- * This value is then stored in a ring buffer of recently measured
- * noise floor values so we have a moving window of the last few
- * samples.
+/**
+ * ath5k_hw_update_noise_floor() - Update NF on hardware
+ * @ah: The &struct ath5k_hw
*
- * The median of the values in the history is then loaded into the
- * hardware for its own use for RSSI and CCA measurements.
+ * This is the main function we call to perform a NF calibration,
+ * it reads NF from hardware, calculates the median and updates
+ * NF on hw.
*/
-void ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
+void
+ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
{
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
u32 val;
@@ -1436,11 +1660,15 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
"noise floor calibrated: %d\n", nf);
}
-/*
- * Perform a PHY calibration on RF5110
- * -Fix BPSK/QAM Constellation (I/Q correction)
+/**
+ * ath5k_hw_rf5110_calibrate() - Perform a PHY calibration on RF5110
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Do a complete PHY calibration (AGC + NF + I/Q) on RF5110
*/
-static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
+static int
+ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
u32 phy_sig, phy_agc, phy_sat, beacon;
@@ -1535,8 +1763,9 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
return 0;
}
-/*
- * Perform I/Q calibration on RF5111/5112 and newer chips
+/**
+ * ath5k_hw_rf511x_iq_calibrate() - Perform I/Q calibration on RF5111 and newer
+ * @ah: The &struct ath5k_hw
*/
static int
ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah)
@@ -1610,10 +1839,17 @@ ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah)
return 0;
}
-/*
- * Perform a PHY calibration
+/**
+ * ath5k_hw_phy_calibrate() - Perform a PHY calibration
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * The main function we call from above to perform
+ * a short or full PHY calibration based on RF chip
+ * and current channel
*/
-int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
+int
+ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
int ret;
@@ -1668,6 +1904,16 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
* Spur mitigation functions *
\***************************/
+/**
+ * ath5k_hw_set_spur_mitigation_filter() - Configure SPUR filter
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * This function gets called during PHY initialization to
+ * configure the spur filter for the given channel. Spur is noise
+ * generated due to "reflection" effects, for more information on this
+ * method check out patent US7643810
+ */
static void
ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
@@ -1907,15 +2153,73 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
* Antenna control *
\*****************/
-static void /*TODO:Boundary check*/
+/**
+ * DOC: Antenna control
+ *
+ * Hw supports up to 14 antennas ! I haven't found any card that implements
+ * that. The maximum number of antennas I've seen is up to 4 (2 for 2GHz and 2
+ * for 5GHz). Antenna 1 (MAIN) should be omnidirectional, 2 (AUX)
+ * omnidirectional or sectorial and antennas 3-14 sectorial (or directional).
+ *
+ * We can have a single antenna for RX and multiple antennas for TX.
+ * RX antenna is our "default" antenna (usually antenna 1) set on
+ * DEFAULT_ANTENNA register and TX antenna is set on each TX control descriptor
+ * (0 for automatic selection, 1 - 14 antenna number).
+ *
+ * We can let hw do all the work doing fast antenna diversity for both
+ * tx and rx or we can do things manually. Here are the options we have
+ * (all are bits of STA_ID1 register):
+ *
+ * AR5K_STA_ID1_DEFAULT_ANTENNA -> When 0 is set as the TX antenna on TX
+ * control descriptor, use the default antenna to transmit or else use the last
+ * antenna on which we received an ACK.
+ *
+ * AR5K_STA_ID1_DESC_ANTENNA -> Update default antenna after each TX frame to
+ * the antenna on which we got the ACK for that frame.
+ *
+ * AR5K_STA_ID1_RTS_DEF_ANTENNA -> Use default antenna for RTS or else use the
+ * one on the TX descriptor.
+ *
+ * AR5K_STA_ID1_SELFGEN_DEF_ANT -> Use default antenna for self generated frames
+ * (ACKs etc), or else use current antenna (the one we just used for TX).
+ *
+ * Using the above we support the following scenarios:
+ *
+ * AR5K_ANTMODE_DEFAULT -> Hw handles antenna diversity etc automatically
+ *
+ * AR5K_ANTMODE_FIXED_A -> Only antenna A (MAIN) is present
+ *
+ * AR5K_ANTMODE_FIXED_B -> Only antenna B (AUX) is present
+ *
+ * AR5K_ANTMODE_SINGLE_AP -> Sta locked on a single ap
+ *
+ * AR5K_ANTMODE_SECTOR_AP -> AP with tx antenna set on tx desc
+ *
+ * AR5K_ANTMODE_SECTOR_STA -> STA with tx antenna set on tx desc
+ *
+ * AR5K_ANTMODE_DEBUG Debug mode -A -> Rx, B-> Tx-
+ *
+ * Also note that when setting antenna to F on tx descriptor card inverts
+ * current tx antenna.
+ */
+
+/**
+ * ath5k_hw_set_def_antenna() - Set default rx antenna on AR5211/5212 and newer
+ * @ah: The &struct ath5k_hw
+ * @ant: Antenna number
+ */
+static void
ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant)
{
if (ah->ah_version != AR5K_AR5210)
ath5k_hw_reg_write(ah, ant & 0x7, AR5K_DEFAULT_ANTENNA);
}
-/*
- * Enable/disable fast rx antenna diversity
+/**
+ * ath5k_hw_set_fast_div() - Enable/disable fast rx antenna diversity
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ * @enable: True to enable, false to disable
*/
static void
ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable)
@@ -1955,6 +2259,14 @@ ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable)
}
}
+/**
+ * ath5k_hw_set_antenna_switch() - Set up antenna switch table
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ *
+ * Switch table comes from EEPROM and includes information on controlling
+ * the 2 antenna RX attenuators
+ */
void
ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode)
{
@@ -1986,8 +2298,10 @@ ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode)
AR5K_PHY_ANT_SWITCH_TABLE_1);
}
-/*
- * Set antenna operating mode
+/**
+ * ath5k_hw_set_antenna_mode() - Set antenna operating mode
+ * @ah: The &struct ath5k_hw
+ * @ant_mode: One of enum ath5k_ant_mode
*/
void
ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
@@ -2110,8 +2424,13 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
* Helper functions
*/
-/*
- * Do linear interpolation between two given (x, y) points
+/**
+ * ath5k_get_interpolated_value() - Get interpolated Y val between two points
+ * @target: X value of the middle point
+ * @x_left: X value of the left point
+ * @x_right: X value of the right point
+ * @y_left: Y value of the left point
+ * @y_right: Y value of the right point
*/
static s16
ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right,
@@ -2138,13 +2457,18 @@ ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right,
return result;
}
-/*
- * Find vertical boundary (min pwr) for the linear PCDAC curve.
+/**
+ * ath5k_get_linear_pcdac_min() - Find vertical boundary (min pwr) for the
+ * linear PCDAC curve
+ * @stepL: Left array with y values (pcdac steps)
+ * @stepR: Right array with y values (pcdac steps)
+ * @pwrL: Left array with x values (power steps)
+ * @pwrR: Right array with x values (power steps)
*
* Since we have the top of the curve and we draw the line below
* until we reach 1 (1 pcdac step) we need to know which point
- * (x value) that is so that we don't go below y axis and have negative
- * pcdac values when creating the curve, or fill the table with zeroes.
+ * (x value) that is so that we don't go below x axis and have negative
+ * pcdac values when creating the curve, or fill the table with zeros.
*/
static s16
ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
@@ -2190,7 +2514,16 @@ ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
return max(min_pwrL, min_pwrR);
}
-/*
+/**
+ * ath5k_create_power_curve() - Create a Power to PDADC or PCDAC curve
+ * @pmin: Minimum power value (xmin)
+ * @pmax: Maximum power value (xmax)
+ * @pwr: Array of power steps (x values)
+ * @vpd: Array of matching PCDAC/PDADC steps (y values)
+ * @num_points: Number of provided points
+ * @vpd_table: Array to fill with the full PCDAC/PDADC values (y values)
+ * @type: One of enum ath5k_powertable_type (eeprom.h)
+ *
* Interpolate (pwr,vpd) points to create a Power to PDADC or a
* Power to PCDAC curve.
*
@@ -2248,7 +2581,14 @@ ath5k_create_power_curve(s16 pmin, s16 pmax,
}
}
-/*
+/**
+ * ath5k_get_chan_pcal_surrounding_piers() - Get surrounding calibration piers
+ * for a given channel.
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @pcinfo_l: The &struct ath5k_chan_pcal_info to put the left cal. pier
+ * @pcinfo_r: The &struct ath5k_chan_pcal_info to put the right cal. pier
+ *
* Get the surrounding per-channel power calibration piers
* for a given frequency so that we can interpolate between
* them and come up with an appropriate dataset for our current
@@ -2331,11 +2671,17 @@ done:
*pcinfo_r = &pcinfo[idx_r];
}
-/*
+/**
+ * ath5k_get_rate_pcal_data() - Get the interpolated per-rate power
+ * calibration data
+ * @ah: The &struct ath5k_hw *ah,
+ * @channel: The &struct ieee80211_channel
+ * @rates: The &struct ath5k_rate_pcal_info to fill
+ *
* Get the surrounding per-rate power calibration data
* for a given frequency and interpolate between power
* values to set max target power supported by hw for
- * each rate.
+ * each rate on this frequency.
*/
static void
ath5k_get_rate_pcal_data(struct ath5k_hw *ah,
@@ -2423,7 +2769,11 @@ done:
rpinfo[idx_r].target_power_54);
}
-/*
+/**
+ * ath5k_get_max_ctl_power() - Get max edge power for a given frequency
+ * @ah: the &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
* Get the max edge power for this channel if
* we have such data from EEPROM's Conformance Test
* Limits (CTL), and limit max power if needed.
@@ -2503,8 +2853,39 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah,
* Power to PCDAC table functions
*/
-/*
- * Fill Power to PCDAC table on RF5111
+/**
+ * DOC: Power to PCDAC table functions
+ *
+ * For RF5111 we have an XPD -eXternal Power Detector- curve
+ * for each calibrated channel. Each curve has 0,5dB Power steps
+ * on x axis and PCDAC steps (offsets) on y axis and looks like an
+ * exponential function. To recreate the curve we read 11 points
+ * from eeprom (eeprom.c) and interpolate here.
+ *
+ * For RF5112 we have 4 XPD -eXternal Power Detector- curves
+ * for each calibrated channel on 0, -6, -12 and -18dBm but we only
+ * use the higher (3) and the lower (0) curves. Each curve again has 0.5dB
+ * power steps on x axis and PCDAC steps on y axis and looks like a
+ * linear function. To recreate the curve and pass the power values
+ * on hw, we get 4 points for xpd 0 (lower gain -> max power)
+ * and 3 points for xpd 3 (higher gain -> lower power) from eeprom (eeprom.c)
+ * and interpolate here.
+ *
+ * For a given channel we get the calibrated points (piers) for it or
+ * -if we don't have calibration data for this specific channel- from the
+ * available surrounding channels we have calibration data for, after we do a
+ * linear interpolation between them. Then since we have our calibrated points
+ * for this channel, we do again a linear interpolation between them to get the
+ * whole curve.
+ *
+ * We finally write the Y values of the curve(s) (the PCDAC values) on hw
+ */
+
+/**
+ * ath5k_fill_pwr_to_pcdac_table() - Fill Power to PCDAC table on RF5111
+ * @ah: The &struct ath5k_hw
+ * @table_min: Minimum power (x min)
+ * @table_max: Maximum power (x max)
*
* No further processing is needed for RF5111, the only thing we have to
* do is fill the values below and above calibration range since eeprom data
@@ -2545,10 +2926,14 @@ ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min,
}
-/*
- * Combine available XPD Curves and fill Linear Power to PCDAC table
- * on RF5112
+/**
+ * ath5k_combine_linear_pcdac_curves() - Combine available PCDAC Curves
+ * @ah: The &struct ath5k_hw
+ * @table_min: Minimum power (x min)
+ * @table_max: Maximum power (x max)
+ * @pdcurves: Number of pd curves
*
+ * Combine available XPD Curves and fill Linear Power to PCDAC table on RF5112
* RFX112 can have up to 2 curves (one for low txpower range and one for
* higher txpower range). We need to put them both on pcdac_out and place
* them in the correct location. In case we only have one curve available
@@ -2650,7 +3035,10 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min,
}
}
-/* Write PCDAC values on hw */
+/**
+ * ath5k_write_pcdac_table() - Write the PCDAC values on hw
+ * @ah: The &struct ath5k_hw
+ */
static void
ath5k_write_pcdac_table(struct ath5k_hw *ah)
{
@@ -2673,9 +3061,32 @@ ath5k_write_pcdac_table(struct ath5k_hw *ah)
* Power to PDADC table functions
*/
-/*
- * Set the gain boundaries and create final Power to PDADC table
+/**
+ * DOC: Power to PDADC table functions
+ *
+ * For RF2413 and later we have a Power to PDADC table (Power Detector)
+ * instead of a PCDAC (Power Control) and 4 pd gain curves for each
+ * calibrated channel. Each curve has power on x axis in 0.5 db steps and
+ * PDADC steps on y axis and looks like an exponential function like the
+ * RF5111 curve.
+ *
+ * To recreate the curves we read the points from eeprom (eeprom.c)
+ * and interpolate here. Note that in most cases only 2 (higher and lower)
+ * curves are used (like RF5112) but vendors have the opportunity to include
+ * all 4 curves on eeprom. The final curve (higher power) has an extra
+ * point for better accuracy like RF5112.
*
+ * The process is similar to what we do above for RF5111/5112
+ */
+
+/**
+ * ath5k_combine_pwr_to_pdadc_curves() - Combine the various PDADC curves
+ * @ah: The &struct ath5k_hw
+ * @pwr_min: Minimum power (x min)
+ * @pwr_max: Maximum power (x max)
+ * @pdcurves: Number of available curves
+ *
+ * Combine the various pd curves and create the final Power to PDADC table
* We can have up to 4 pd curves, we need to do a similar process
* as we do for RF5112. This time we don't have an edge_flag but we
* set the gain boundaries on a separate register.
@@ -2799,7 +3210,11 @@ ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah,
}
-/* Write PDADC values on hw */
+/**
+ * ath5k_write_pwr_to_pdadc_table() - Write the PDADC values on hw
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ */
static void
ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode)
{
@@ -2856,7 +3271,13 @@ ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode)
* Common code for PCDAC/PDADC tables
*/
-/*
+/**
+ * ath5k_setup_channel_powertable() - Set up power table for this channel
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @ee_mode: One of enum ath5k_driver_mode
+ * @type: One of enum ath5k_powertable_type (eeprom.h)
+ *
* This is the main function that uses all of the above
* to set PCDAC/PDADC table on hw for the current channel.
* This table is used for tx power calibration on the baseband,
@@ -3054,7 +3475,12 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
return 0;
}
-/* Write power table for current channel to hw */
+/**
+ * ath5k_write_channel_powertable() - Set power table for current channel on hw
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ * @type: One of enum ath5k_powertable_type (eeprom.h)
+ */
static void
ath5k_write_channel_powertable(struct ath5k_hw *ah, u8 ee_mode, u8 type)
{
@@ -3064,28 +3490,36 @@ ath5k_write_channel_powertable(struct ath5k_hw *ah, u8 ee_mode, u8 type)
ath5k_write_pcdac_table(ah);
}
-/*
- * Per-rate tx power setting
+
+/**
+ * DOC: Per-rate tx power setting
*
- * This is the code that sets the desired tx power (below
+ * This is the code that sets the desired tx power limit (below
* maximum) on hw for each rate (we also have TPC that sets
- * power per packet). We do that by providing an index on the
- * PCDAC/PDADC table we set up.
- */
-
-/*
- * Set rate power table
+ * power per packet type). We do that by providing an index on the
+ * PCDAC/PDADC table we set up above, for each rate.
*
* For now we only limit txpower based on maximum tx power
- * supported by hw (what's inside rate_info). We need to limit
- * this even more, based on regulatory domain etc.
+ * supported by hw (what's inside rate_info) + conformance test
+ * limits. We need to limit this even more, based on regulatory domain
+ * etc to be safe. Normally this is done from above so we don't care
+ * here, all we care is that the tx power we set will be O.K.
+ * for the hw (e.g. won't create noise on PA etc).
*
- * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps)
- * and is indexed as follows:
+ * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps -
+ * x values) and is indexed as follows:
* rates[0] - rates[7] -> OFDM rates
* rates[8] - rates[14] -> CCK rates
* rates[15] -> XR rates (they all have the same power)
*/
+
+/**
+ * ath5k_setup_rate_powertable() - Set up rate power table for a given tx power
+ * @ah: The &struct ath5k_hw
+ * @max_pwr: The maximum tx power requested in 0.5dB steps
+ * @rate_info: The &struct ath5k_rate_pcal_info to fill
+ * @ee_mode: One of enum ath5k_driver_mode
+ */
static void
ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
struct ath5k_rate_pcal_info *rate_info,
@@ -3156,8 +3590,14 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
}
-/*
- * Set transmission power
+/**
+ * ath5k_hw_txpower() - Set transmission power limit for a given channel
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @txpower: Requested tx power in 0.5dB steps
+ *
+ * Combines all of the above to set the requested tx power limit
+ * on hw.
*/
static int
ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
@@ -3275,7 +3715,16 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
return 0;
}
-int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
+/**
+ * ath5k_hw_set_txpower_limit() - Set txpower limit for the current channel
+ * @ah: The &struct ath5k_hw
+ * @txpower: The requested tx power limit in 0.5dB steps
+ *
+ * This function provides access to ath5k_hw_txpower to the driver in
+ * case user or an application changes it while PHY is running.
+ */
+int
+ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
{
ATH5K_DBG(ah, ATH5K_DEBUG_TXPOWER,
"changing txpower to %d\n", txpower);
@@ -3283,11 +3732,26 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
return ath5k_hw_txpower(ah, ah->ah_current_channel, txpower);
}
+
/*************\
Init function
\*************/
-int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+/**
+ * ath5k_hw_phy_init() - Initialize PHY
+ * @ah: The &struct ath5k_hw
+ * @channel: The @struct ieee80211_channel
+ * @mode: One of enum ath5k_driver_mode
+ * @fast: Try a fast channel switch instead
+ *
+ * This is the main function used during reset to initialize PHY
+ * or do a fast channel change if possible.
+ *
+ * NOTE: Do not call this one from the driver, it assumes PHY is in a
+ * warm reset state !
+ */
+int
+ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
u8 mode, bool fast)
{
struct ieee80211_channel *curr_channel;