diff options
| author | John W. Linville <linville@tuxdriver.com> | 2011-07-15 10:05:24 -0400 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2011-07-15 10:05:24 -0400 |
| commit | 95a943c162d74b20d869917bdf5df11293c35b63 (patch) | |
| tree | c69d5cb97a4d97b6062a276ecdfa8582535193af /drivers/net/wireless/ath/ath5k | |
| parent | ecae42d37045ec71831d0e0e493e00b0e0732edd (diff) | |
| parent | 95acac61ba66c4abd40e038dae8c1ed2e176c7b1 (diff) | |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
net/bluetooth/l2cap_core.c
Diffstat (limited to 'drivers/net/wireless/ath/ath5k')
24 files changed, 467 insertions, 427 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c index c38e9e84899..ba682a0b2dd 100644 --- a/drivers/net/wireless/ath/ath5k/ahb.c +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -167,8 +167,8 @@ static int ath_ahb_probe(struct platform_device *pdev) * driver for it */ if (to_platform_device(sc->dev)->id == 0 && - (bcfg->config->flags & (BD_WLAN0|BD_WLAN1)) == - (BD_WLAN1|BD_WLAN0)) + (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) == + (BD_WLAN1 | BD_WLAN0)) __set_bit(ATH_STAT_2G_DISABLED, sc->status); } diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c index f915f404302..2f0b967a6d8 100644 --- a/drivers/net/wireless/ath/ath5k/ani.c +++ b/drivers/net/wireless/ath/ath5k/ani.c @@ -74,7 +74,7 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level) static const s8 fr[] = { -78, -80 }; #endif if (level < 0 || level >= ARRAY_SIZE(sz)) { - ATH5K_ERR(ah->ah_sc, "noise immuniy level %d out of range", + ATH5K_ERR(ah->ah_sc, "noise immunity level %d out of range", level); return; } @@ -630,6 +630,11 @@ ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode) if (ah->ah_version < AR5K_AR5212) return; + if (mode < ATH5K_ANI_MODE_OFF || mode > ATH5K_ANI_MODE_AUTO) { + ATH5K_ERR(ah->ah_sc, "ANI mode %d out of range", mode); + return; + } + /* clear old state information */ memset(&ah->ah_sc->ani_state, 0, sizeof(ah->ah_sc->ani_state)); @@ -642,7 +647,7 @@ ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode) /* initial values for our ani parameters */ if (mode == ATH5K_ANI_MODE_OFF) { ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "ANI off\n"); - } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) { + } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) { ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "ANI manual low -> high sensitivity\n"); ath5k_ani_set_noise_immunity_level(ah, 0); diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index c4c02d5145c..8ff17941bb2 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -18,9 +18,9 @@ #ifndef _ATH5K_H #define _ATH5K_H -/* TODO: Clean up channel debuging -doesn't work anyway- and start +/* TODO: Clean up channel debugging (doesn't work anyway) and start * working on reg. control code using all available eeprom information - * -rev. engineering needed- */ + * (rev. engineering needed) */ #define CHAN_DEBUG 0 #include <linux/io.h> @@ -39,40 +39,41 @@ #include "../ath.h" /* PCI IDs */ -#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ -#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ -#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ -#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ -#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ -#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ +#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ +#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ +#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ +#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ +#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ -#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ -#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ -#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ -#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ +#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ +#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ +#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ +#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ /****************************\ GENERIC DRIVER DEFINITIONS \****************************/ -#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__) +#define ATH5K_PRINTF(fmt, ...) \ + printk(KERN_WARNING "%s: " fmt, __func__, ##__VA_ARGS__) #define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ printk(_level "ath5k %s: " _fmt, \ @@ -155,7 +156,7 @@ } while (0) /* - * Some tuneable values (these should be changeable by the user) + * Some tunable values (these should be changeable by the user) * TODO: Make use of them and add more options OR use debug/configfs */ #define AR5K_TUNE_DMA_BEACON_RESP 2 @@ -170,8 +171,8 @@ #define AR5K_TUNE_RSSI_THRES 129 /* This must be set when setting the RSSI threshold otherwise it can * prevent a reset. If AR5K_RSSI_THR is read after writing to it - * the BMISS_THRES will be seen as 0, seems harware doesn't keep - * track of it. Max value depends on harware. For AR5210 this is just 7. + * the BMISS_THRES will be seen as 0, seems hardware doesn't keep + * track of it. Max value depends on hardware. For AR5210 this is just 7. * For AR5211+ this seems to be up to 255. */ #define AR5K_TUNE_BMISS_THRES 7 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000 @@ -361,7 +362,7 @@ struct ath5k_srev_name { /* * Some of this information is based on Documentation from: * - * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG * * Modulation for Atheros' eXtended Range - range enhancing extension that is * supposed to double the distance an Atheros client device can keep a @@ -374,12 +375,12 @@ struct ath5k_srev_name { * they are exclusive. * */ -#define MODULATION_XR 0x00000200 +#define MODULATION_XR 0x00000200 /* * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s * signaling rate achieved through the bonding of two 54Mbit/s 802.11g - * channels. To use this feature your Access Point must also suport it. + * channels. To use this feature your Access Point must also support it. * There is also a distinction between "static" and "dynamic" turbo modes: * * - Static: is the dumb version: devices set to this mode stick to it until @@ -495,9 +496,9 @@ enum ath5k_tx_queue { */ enum ath5k_tx_queue_subtype { AR5K_WME_AC_BK = 0, /*Background traffic*/ - AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ - AR5K_WME_AC_VI, /*Video traffic*/ - AR5K_WME_AC_VO, /*Voice traffic*/ + AR5K_WME_AC_BE, /*Best-effort (normal) traffic*/ + AR5K_WME_AC_VI, /*Video traffic*/ + AR5K_WME_AC_VO, /*Voice traffic*/ }; /* @@ -616,8 +617,8 @@ struct ath5k_rx_status { #define AR5K_RXERR_FIFO 0x04 #define AR5K_RXERR_DECRYPT 0x08 #define AR5K_RXERR_MIC 0x10 -#define AR5K_RXKEYIX_INVALID ((u8) - 1) -#define AR5K_TXKEYIX_INVALID ((u32) - 1) +#define AR5K_RXKEYIX_INVALID ((u8) -1) +#define AR5K_TXKEYIX_INVALID ((u32) -1) /**************************\ @@ -678,17 +679,18 @@ struct ath5k_gain { #define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ #define CHANNEL_XR 0x0800 /* XR channel */ -#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) -#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) -#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) -#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) +#define CHANNEL_A (CHANNEL_5GHZ | CHANNEL_OFDM) +#define CHANNEL_B (CHANNEL_2GHZ | CHANNEL_CCK) +#define CHANNEL_G (CHANNEL_2GHZ | CHANNEL_OFDM) +#define CHANNEL_X (CHANNEL_5GHZ | CHANNEL_OFDM | CHANNEL_XR) -#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ) +#define CHANNEL_ALL (CHANNEL_OFDM | CHANNEL_CCK | \ + CHANNEL_2GHZ | CHANNEL_5GHZ) #define CHANNEL_MODES CHANNEL_ALL /* - * Used internaly for reset_tx_queue). + * Used internally for ath5k_hw_reset_tx_queue(). * Also see struct struct ieee80211_channel. */ #define IS_CHAN_XR(_c) ((_c->hw_value & CHANNEL_XR) != 0) @@ -710,7 +712,7 @@ struct ath5k_athchan_2ghz { \******************/ /** - * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. + * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32. * * The rate code is used to get the RX rate or set the TX rate on the * hardware descriptors. It is also used for internal modulation control @@ -776,11 +778,11 @@ extern int ath5k_modparam_nohwcrypt; /* * Misc definitions */ -#define AR5K_RSSI_EP_MULTIPLIER (1<<7) +#define AR5K_RSSI_EP_MULTIPLIER (1 << 7) #define AR5K_ASSERT_ENTRY(_e, _s) do { \ if (_e >= _s) \ - return (false); \ + return false; \ } while (0) /* @@ -791,52 +793,52 @@ extern int ath5k_modparam_nohwcrypt; * enum ath5k_int - Hardware interrupt masks helpers * * @AR5K_INT_RX: mask to identify received frame interrupts, of type - * AR5K_ISR_RXOK or AR5K_ISR_RXERR + * AR5K_ISR_RXOK or AR5K_ISR_RXERR * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) * @AR5K_INT_RXNOFRM: No frame received (?) * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The - * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's - * LinkPtr is NULL. For more details, refer to: - * http://www.freepatentsonline.com/20030225739.html + * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's + * LinkPtr is NULL. For more details, refer to: + * http://www.freepatentsonline.com/20030225739.html * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). - * Note that Rx overrun is not always fatal, on some chips we can continue - * operation without reseting the card, that's why int_fatal is not - * common for all chips. + * Note that Rx overrun is not always fatal, on some chips we can continue + * operation without resetting the card, that's why int_fatal is not + * common for all chips. * @AR5K_INT_TX: mask to identify received frame interrupts, of type - * AR5K_ISR_TXOK or AR5K_ISR_TXERR + * AR5K_ISR_TXOK or AR5K_ISR_TXERR * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold - * We currently do increments on interrupt by - * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 + * We currently do increments on interrupt by + * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 * @AR5K_INT_MIB: Indicates the either Management Information Base counters or * one of the PHY error counters reached the maximum value and should be * read and cleared. * @AR5K_INT_RXPHY: RX PHY Error * @AR5K_INT_RXKCM: RX Key cache miss * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a - * beacon that must be handled in software. The alternative is if you - * have VEOL support, in that case you let the hardware deal with things. + * beacon that must be handled in software. The alternative is if you + * have VEOL support, in that case you let the hardware deal with things. * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing - * beacons from the AP have associated with, we should probably try to - * reassociate. When in IBSS mode this might mean we have not received - * any beacons from any local stations. Note that every station in an - * IBSS schedules to send beacons at the Target Beacon Transmission Time - * (TBTT) with a random backoff. + * beacons from the AP have associated with, we should probably try to + * reassociate. When in IBSS mode this might mean we have not received + * any beacons from any local stations. Note that every station in an + * IBSS schedules to send beacons at the Target Beacon Transmission Time + * (TBTT) with a random backoff. * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now - * until properly handled + * until properly handled * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA - * errors. These types of errors we can enable seem to be of type - * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. + * errors. These types of errors we can enable seem to be of type + * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. * @AR5K_INT_GLOBAL: Used to clear and set the IER * @AR5K_INT_NOCARD: signals the card has been removed - * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same - * bit value + * @AR5K_INT_COMMON: common interrupts shared among MACs with the same + * bit value * * These are mapped to take advantage of some common bits * between the MACs, to be able to set intr properties * easier. Some of them are not used yet inside hw.c. Most map - * to the respective hw interrupt value as they are common amogst different + * to the respective hw interrupt value as they are common among different * MACs. */ enum ath5k_int { @@ -968,9 +970,9 @@ enum ath5k_capability_type { AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ AR5K_CAP_XR = 16, /* Supports XR mode */ - AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ - AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ - AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ + AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ + AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ + AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ }; @@ -1010,8 +1012,7 @@ struct ath5k_capabilities { /* size of noise floor history (keep it a power of two) */ #define ATH5K_NF_CAL_HIST_MAX 8 -struct ath5k_nfcal_hist -{ +struct ath5k_nfcal_hist { s16 index; /* current index into nfval */ s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */ }; @@ -1066,6 +1067,8 @@ struct ath5k_hw { u8 ah_retry_long; u8 ah_retry_short; + u32 ah_use_32khz_clock; + u8 ah_coverage_class; bool ah_ack_bitrate_high; u8 ah_bwmode; @@ -1357,17 +1360,17 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 mode, bool fast); /* - * Functions used internaly + * Functions used internally */ static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) { - return &ah->common; + return &ah->common; } static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah) { - return &(ath5k_hw_common(ah)->regulatory); + return &(ath5k_hw_common(ah)->regulatory); } #ifdef CONFIG_ATHEROS_AR231X @@ -1378,7 +1381,7 @@ static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg) /* On AR2315 and AR2317 the PCI clock domain registers * are outside of the WMAC register space */ if (unlikely((reg >= 0x4000) && (reg < 0x5000) && - (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6))) + (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6))) return AR5K_AR2315_PCI_BASE + reg; return ah->ah_iobase + reg; diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c index 1588401de3c..14dc52e4b50 100644 --- a/drivers/net/wireless/ath/ath5k/attach.c +++ b/drivers/net/wireless/ath/ath5k/attach.c @@ -104,6 +104,7 @@ static int ath5k_hw_post(struct ath5k_hw *ah) */ int ath5k_hw_init(struct ath5k_softc *sc) { + static const u8 zero_mac[ETH_ALEN] = { }; struct ath5k_hw *ah = sc->ah; struct ath_common *common = ath5k_hw_common(ah); struct pci_dev *pdev = sc->pdev; @@ -191,7 +192,7 @@ int ath5k_hw_init(struct ath5k_softc *sc) break; case AR5K_SREV_RAD_5424: if (ah->ah_mac_version == AR5K_SREV_AR2425 || - ah->ah_mac_version == AR5K_SREV_AR2417){ + ah->ah_mac_version == AR5K_SREV_AR2417) { ah->ah_radio = AR5K_RF2425; ah->ah_single_chip = true; } else { @@ -210,28 +211,28 @@ int ath5k_hw_init(struct ath5k_softc *sc) ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, CHANNEL_2GHZ); } else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) || - ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) || - ah->ah_phy_revision == AR5K_SREV_PHY_2425) { + ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) || + ah->ah_phy_revision == AR5K_SREV_PHY_2425) { ah->ah_radio = AR5K_RF2425; ah->ah_single_chip = true; ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425; } else if (srev == AR5K_SREV_AR5213A && - ah->ah_phy_revision == AR5K_SREV_PHY_5212B) { + ah->ah_phy_revision == AR5K_SREV_PHY_5212B) { ah->ah_radio = AR5K_RF5112; ah->ah_single_chip = false; ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5112B; } else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4) || - ah->ah_mac_version == (AR5K_SREV_AR2315_R6 >> 4)) { + ah->ah_mac_version == (AR5K_SREV_AR2315_R6 >> 4)) { ah->ah_radio = AR5K_RF2316; ah->ah_single_chip = true; ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316; } else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) || - ah->ah_phy_revision == AR5K_SREV_PHY_5413) { + ah->ah_phy_revision == AR5K_SREV_PHY_5413) { ah->ah_radio = AR5K_RF5413; ah->ah_single_chip = true; ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413; } else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) || - ah->ah_phy_revision == AR5K_SREV_PHY_2413) { + ah->ah_phy_revision == AR5K_SREV_PHY_2413) { ah->ah_radio = AR5K_RF2413; ah->ah_single_chip = true; ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413; @@ -243,9 +244,8 @@ int ath5k_hw_init(struct ath5k_softc *sc) } - /* Return on unsuported chips (unsupported eeprom etc) */ - if ((srev >= AR5K_SREV_AR5416) && - (srev < AR5K_SREV_AR2425)) { + /* Return on unsupported chips (unsupported eeprom etc) */ + if ((srev >= AR5K_SREV_AR5416) && (srev < AR5K_SREV_AR2425)) { ATH5K_ERR(sc, "Device not yet supported.\n"); ret = -ENODEV; goto err; @@ -285,7 +285,7 @@ int ath5k_hw_init(struct ath5k_softc *sc) ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES); ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES); - /* If serdes programing is enabled, increase PCI-E + /* If serdes programming is enabled, increase PCI-E * tx power for systems with long trace from host * to minicard connector. */ if (ee->ee_serdes) @@ -334,7 +334,7 @@ int ath5k_hw_init(struct ath5k_softc *sc) } /* MAC address is cleared until add_interface */ - ath5k_hw_set_lladdr(ah, (u8[ETH_ALEN]){}); + ath5k_hw_set_lladdr(ah, zero_mac); /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ memcpy(common->curbssid, ath_bcast_mac, ETH_ALEN); diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index fb05bf89b8e..dce848f76d7 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -532,7 +532,7 @@ ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc, if (iter_data.n_stas > 1) { /* If you have multiple STA interfaces connected to * different APs, ARPs are not received (most of the time?) - * Enabling PROMISC appears to fix that probem. + * Enabling PROMISC appears to fix that problem. */ sc->filter_flags |= AR5K_RX_FILTER_PROM; } @@ -815,8 +815,7 @@ ath5k_desc_alloc(struct ath5k_softc *sc) INIT_LIST_HEAD(&sc->txbuf); sc->txbuf_len = ATH_TXBUF; - for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, - da += sizeof(*ds)) { + for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, da += sizeof(*ds)) { bf->desc = ds; bf->daddr = da; list_add_tail(&bf->list, &sc->txbuf); @@ -982,7 +981,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc) goto err; if (sc->opmode == NL80211_IFTYPE_AP || - sc->opmode == NL80211_IFTYPE_MESH_POINT) { + sc->opmode == NL80211_IFTYPE_MESH_POINT) { /* * Always burst out beacon and CAB traffic * (aifs = cwmin = cwmax = 0) @@ -1262,16 +1261,15 @@ ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi) */ static int ath5k_common_padpos(struct sk_buff *skb) { - struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; __le16 frame_control = hdr->frame_control; int padpos = 24; - if (ieee80211_has_a4(frame_control)) { + if (ieee80211_has_a4(frame_control)) padpos += ETH_ALEN; - } - if (ieee80211_is_data_qos(frame_control)) { + + if (ieee80211_is_data_qos(frame_control)) padpos += IEEE80211_QOS_CTL_LEN; - } return padpos; } @@ -1285,13 +1283,13 @@ static int ath5k_add_padding(struct sk_buff *skb) int padpos = ath5k_common_padpos(skb); int padsize = padpos & 3; - if (padsize && skb->len>padpos) { + if (padsize && skb->len > padpos) { if (skb_headroom(skb) < padsize) return -1; skb_push(skb, padsize); - memmove(skb->data, skb->data+padsize, padpos); + memmove(skb->data, skb->data + padsize, padpos); return padsize; } @@ -1316,7 +1314,7 @@ static int ath5k_remove_padding(struct sk_buff *skb) int padpos = ath5k_common_padpos(skb); int padsize = padpos & 3; - if (padsize && skb->len>=padpos+padsize) { + if (padsize && skb->len >= padpos + padsize) { memmove(skb->data + padsize, skb->data, padpos); skb_pull(skb, padsize); return padsize; @@ -1352,7 +1350,7 @@ ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb, * timestamp (beginning of phy frame, data frame, end of rx?). * The only thing we know is that it is hardware specific... * On AR5213 it seems the rx timestamp is at the end of the - * frame, but i'm not sure. + * frame, but I'm not sure. * * NOTE: mac80211 defines mactime at the beginning of the first * data symbol. Since we don't have any time references it's @@ -1450,10 +1448,11 @@ ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs) static void ath5k_set_current_imask(struct ath5k_softc *sc) { - enum ath5k_int imask = sc->imask; + enum ath5k_int imask; unsigned long flags; spin_lock_irqsave(&sc->irqlock, flags); + imask = sc->imask; if (sc->rx_pending) imask &= ~AR5K_INT_RX_ALL; if (sc->tx_pending) @@ -1556,7 +1555,8 @@ ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, goto drop_packet; } - if (txq->txq_len >= txq->txq_max) + if (txq->txq_len >= txq->txq_max && + txq->qnum <= AR5K_TX_QUEUE_ID_DATA_MAX) ieee80211_stop_queue(hw, txq->qnum); spin_lock_irqsave(&sc->txbuflock, flags); @@ -1711,7 +1711,7 @@ ath5k_tasklet_tx(unsigned long data) int i; struct ath5k_softc *sc = (void *)data; - for (i=0; i < AR5K_NUM_TX_QUEUES; i++) + for (i = 0; i < AR5K_NUM_TX_QUEUES; i++) if (sc->txqs[i].setup && (sc->ah->ah_txq_isr & BIT(i))) ath5k_tx_processq(sc, &sc->txqs[i]); @@ -1766,7 +1766,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) * 4 beacons to make sure everybody hears our AP. * When a client tries to associate, hw will keep * track of the tx antenna to be used for this client - * automaticaly, based on ACKed packets. + * automatically, based on ACKed packets. * * Note: AP still listens and transmits RTS on the * default antenna which is supposed to be an omni. @@ -1902,7 +1902,7 @@ ath5k_beacon_send(struct ath5k_softc *sc) avf = (void *)vif->drv_priv; bf = avf->bbuf; if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION || - sc->opmode == NL80211_IFTYPE_MONITOR)) { + sc->opmode == NL80211_IFTYPE_MONITOR)) { ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); return; } @@ -1919,7 +1919,7 @@ ath5k_beacon_send(struct ath5k_softc *sc) /* refresh the beacon for AP or MESH mode */ if (sc->opmode == NL80211_IFTYPE_AP || - sc->opmode == NL80211_IFTYPE_MESH_POINT) + sc->opmode == NL80211_IFTYPE_MESH_POINT) ath5k_beacon_update(sc->hw, vif); trace_ath5k_tx(sc, bf->skb, &sc->txqs[sc->bhalq]); @@ -1932,6 +1932,10 @@ ath5k_beacon_send(struct ath5k_softc *sc) skb = ieee80211_get_buffered_bc(sc->hw, vif); while (skb) { ath5k_tx_queue(sc->hw, skb, sc->cabq); + + if (sc->cabq->txq_len >= sc->cabq->txq_max) + break; + skb = ieee80211_get_buffered_bc(sc->hw, vif); } @@ -1978,7 +1982,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) hw_tsf = ath5k_hw_get_tsf64(ah); hw_tu = TSF_TO_TU(hw_tsf); -#define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3 +#define FUDGE (AR5K_TUNE_SW_BEACON_RESP + 3) /* We use FUDGE to make sure the next TBTT is ahead of the current TU. * Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer * configuration we need to make sure it is bigger than that. */ @@ -2101,11 +2105,11 @@ static void ath5k_tasklet_beacon(unsigned long data) * * In IBSS mode we use this interrupt just to * keep track of the next TBTT (target beacon - * transmission time) in order to detect wether + * transmission time) in order to detect whether * automatic TSF updates happened. */ if (sc->opmode == NL80211_IFTYPE_ADHOC) { - /* XXX: only if VEOL suppported */ + /* XXX: only if VEOL supported */ u64 tsf = ath5k_hw_get_tsf64(sc->ah); sc->nexttbtt += sc->bintval; ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, @@ -2200,13 +2204,12 @@ ath5k_intr(int irq, void *dev_id) ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "rx overrun, resetting\n"); ieee80211_queue_work(sc->hw, &sc->reset_work); - } - else + } else ath5k_schedule_rx(sc); } else { - if (status & AR5K_INT_SWBA) { + if (status & AR5K_INT_SWBA) tasklet_hi_schedule(&sc->beacontq); - } + if (status & AR5K_INT_RXEOL) { /* * NB: the hardware should re-read the link when @@ -2358,7 +2361,7 @@ ath5k_tx_complete_poll_work(struct work_struct *work) * Initialization routines * \*************************/ -int +int __devinit ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops) { struct ieee80211_hw *hw = sc->hw; @@ -2423,6 +2426,7 @@ ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops) common->ah = sc->ah; common->hw = hw; common->priv = sc; + common->clockrate = 40; /* * Cache line size is used to size and align various @@ -2469,7 +2473,7 @@ ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops) sc->ah->ah_radio_5ghz_revision), sc->ah->ah_radio_5ghz_revision); /* No 2GHz support (5110 and some - * 5Ghz only cards) -> report 5Ghz radio */ + * 5GHz only cards) -> report 5GHz radio */ } else if (!test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) { ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", @@ -2488,7 +2492,7 @@ ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops) /* Multi chip radio (RF5111 - RF2111) -> * report both 2GHz/5GHz radios */ else if (sc->ah->ah_radio_5ghz_revision && - sc->ah->ah_radio_2ghz_revision){ + sc->ah->ah_radio_2ghz_revision) { ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", ath5k_chip_name(AR5K_VERSION_RAD, sc->ah->ah_radio_5ghz_revision), @@ -2713,8 +2717,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan, fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0; - ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast, - skip_pcu); + ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast, skip_pcu); if (ret) { ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret); goto err; @@ -2728,7 +2731,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan, ath5k_ani_init(ah, ani_mode); - ah->ah_cal_next_full = jiffies; + ah->ah_cal_next_full = jiffies + msecs_to_jiffies(100); ah->ah_cal_next_ani = jiffies; ah->ah_cal_next_nf = jiffies; ewma_init(&ah->ah_beacon_rssi_avg, 1024, 8); @@ -2772,7 +2775,7 @@ static void ath5k_reset_work(struct work_struct *work) mutex_unlock(&sc->lock); } -static int +static int __devinit ath5k_init(struct ieee80211_hw *hw) { @@ -2800,7 +2803,7 @@ ath5k_init(struct ieee80211_hw *hw) /* * Collect the channel list. The 802.11 layer - * is resposible for filtering this list based + * is responsible for filtering this list based * on settings like the phy mode and regulatory * domain restrictions. */ diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h index b294f330501..0a98777b937 100644 --- a/drivers/net/wireless/ath/ath5k/base.h +++ b/drivers/net/wireless/ath/ath5k/base.h @@ -96,8 +96,7 @@ struct ath5k_txq { /* * State for LED triggers */ -struct ath5k_led -{ +struct ath5k_led { char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ struct ath5k_softc *sc; /* driver state */ struct led_classdev led_dev; /* led classdev */ @@ -122,7 +121,7 @@ struct ath5k_statistics { /* frame errors */ unsigned int rx_all_count; /* all RX frames, including errors */ unsigned int tx_all_count; /* all TX frames, including errors */ - unsigned int rx_bytes_count; /* all RX bytes, including errored pks + unsigned int rx_bytes_count; /* all RX bytes, including errored pkts * and the MAC headers for each packet */ unsigned int tx_bytes_count; /* all TX bytes, including errored pkts @@ -154,9 +153,9 @@ struct ath5k_statistics { }; #if CHAN_DEBUG -#define ATH_CHAN_MAX (26+26+26+200+200) +#define ATH_CHAN_MAX (26 + 26 + 26 + 200 + 200) #else -#define ATH_CHAN_MAX (14+14+14+252+20) +#define ATH_CHAN_MAX (14 + 14 + 14 + 252 + 20) #endif struct ath5k_vif { @@ -251,7 +250,7 @@ struct ath5k_softc { unsigned int nexttbtt; /* next beacon time in TU */ struct ath5k_txq *cabq; /* content after beacon */ - int power_level; /* Requested tx power in dbm */ + int power_level; /* Requested tx power in dBm */ bool assoc; /* associate state */ bool enable_beacon; /* true if beacons are on */ diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c index 7dd88e1c3ff..c752982aec0 100644 --- a/drivers/net/wireless/ath/ath5k/caps.c +++ b/drivers/net/wireless/ath/ath5k/caps.c @@ -52,8 +52,8 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah) __set_bit(AR5K_MODE_11A, caps->cap_mode); } else { /* - * XXX The tranceiver supports frequencies from 4920 to 6100GHz - * XXX and from 2312 to 2732GHz. There are problems with the + * XXX The transceiver supports frequencies from 4920 to 6100MHz + * XXX and from 2312 to 2732MHz. There are problems with the * XXX current ieee80211 implementation because the IEEE * XXX channel mapping does not support negative channel * XXX numbers (2312MHz is channel -19). Of course, this diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c index 0bf7313b8a1..4edca7072d5 100644 --- a/drivers/net/wireless/ath/ath5k/debug.c +++ b/drivers/net/wireless/ath/ath5k/debug.c @@ -205,35 +205,35 @@ static ssize_t read_file_beacon(struct file *file, char __user *user_buf, u64 tsf; v = ath5k_hw_reg_read(sc->ah, AR5K_BEACON); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tintval: %d\tTIM: 0x%x\n", "AR5K_BEACON", v, v & AR5K_BEACON_PERIOD, (v & AR5K_BEACON_TIM) >> AR5K_BEACON_TIM_S); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n", + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n", "AR5K_LAST_TSTP", ath5k_hw_reg_read(sc->ah, AR5K_LAST_TSTP)); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n\n", + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n\n", "AR5K_BEACON_CNT", ath5k_hw_reg_read(sc->ah, AR5K_BEACON_CNT)); v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER0); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", "AR5K_TIMER0 (TBTT)", v, v); v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER1); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", "AR5K_TIMER1 (DMA)", v, v >> 3); v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER2); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", "AR5K_TIMER2 (SWBA)", v, v >> 3); v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER3); - len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + len += snprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", "AR5K_TIMER3 (ATIM)", v, v); tsf = ath5k_hw_get_tsf64(sc->ah); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "TSF\t\t0x%016llx\tTU: %08x\n", (unsigned long long)tsf, TSF_TO_TU(tsf)); @@ -323,16 +323,16 @@ static ssize_t read_file_debug(struct file *file, char __user *user_buf, unsigned int len = 0; unsigned int i; - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "DEBUG LEVEL: 0x%08x\n\n", sc->debug.level); for (i = 0; i < ARRAY_SIZE(dbg_info) - 1; i++) { - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "%10s %c 0x%08x - %s\n", dbg_info[i].name, sc->debug.level & dbg_info[i].level ? '+' : ' ', dbg_info[i].level, dbg_info[i].desc); } - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "%10s %c 0x%08x - %s\n", dbg_info[i].name, sc->debug.level == dbg_info[i].level ? '+' : ' ', dbg_info[i].level, dbg_info[i].desc); @@ -384,60 +384,60 @@ static ssize_t read_file_antenna(struct file *file, char __user *user_buf, unsigned int i; unsigned int v; - len += snprintf(buf+len, sizeof(buf)-len, "antenna mode\t%d\n", + len += snprintf(buf + len, sizeof(buf) - len, "antenna mode\t%d\n", sc->ah->ah_ant_mode); - len += snprintf(buf+len, sizeof(buf)-len, "default antenna\t%d\n", + len += snprintf(buf + len, sizeof(buf) - len, "default antenna\t%d\n", sc->ah->ah_def_ant); - len += snprintf(buf+len, sizeof(buf)-len, "tx antenna\t%d\n", + len += snprintf(buf + len, sizeof(buf) - len, "tx antenna\t%d\n", sc->ah->ah_tx_ant); - len += snprintf(buf+len, sizeof(buf)-len, "\nANTENNA\t\tRX\tTX\n"); + len += snprintf(buf + len, sizeof(buf) - len, "\nANTENNA\t\tRX\tTX\n"); for (i = 1; i < ARRAY_SIZE(sc->stats.antenna_rx); i++) { - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "[antenna %d]\t%d\t%d\n", i, sc->stats.antenna_rx[i], sc->stats.antenna_tx[i]); } - len += snprintf(buf+len, sizeof(buf)-len, "[invalid]\t%d\t%d\n", + len += snprintf(buf + len, sizeof(buf) - len, "[invalid]\t%d\t%d\n", sc->stats.antenna_rx[0], sc->stats.antenna_tx[0]); v = ath5k_hw_reg_read(sc->ah, AR5K_DEFAULT_ANTENNA); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "\nAR5K_DEFAULT_ANTENNA\t0x%08x\n", v); v = ath5k_hw_reg_read(sc->ah, AR5K_STA_ID1); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_STA_ID1_DEFAULT_ANTENNA\t%d\n", (v & AR5K_STA_ID1_DEFAULT_ANTENNA) != 0); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_STA_ID1_DESC_ANTENNA\t%d\n", (v & AR5K_STA_ID1_DESC_ANTENNA) != 0); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_STA_ID1_RTS_DEF_ANTENNA\t%d\n", (v & AR5K_STA_ID1_RTS_DEF_ANTENNA) != 0); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_STA_ID1_SELFGEN_DEF_ANT\t%d\n", (v & AR5K_STA_ID1_SELFGEN_DEF_ANT) != 0); v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_AGCCTL); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "\nAR5K_PHY_AGCCTL_OFDM_DIV_DIS\t%d\n", (v & AR5K_PHY_AGCCTL_OFDM_DIV_DIS) != 0); v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_RESTART); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_PHY_RESTART_DIV_GC\t\t%x\n", (v & AR5K_PHY_RESTART_DIV_GC) >> AR5K_PHY_RESTART_DIV_GC_S); v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_FAST_ANT_DIV); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_PHY_FAST_ANT_DIV_EN\t%d\n", (v & AR5K_PHY_FAST_ANT_DIV_EN) != 0); v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_ANT_SWITCH_TABLE_0); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "\nAR5K_PHY_ANT_SWITCH_TABLE_0\t0x%08x\n", v); v = ath5k_hw_reg_read(sc->ah, AR5K_PHY_ANT_SWITCH_TABLE_1); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_PHY_ANT_SWITCH_TABLE_1\t0x%08x\n", v); if (len > sizeof(buf)) @@ -494,36 +494,36 @@ static ssize_t read_file_misc(struct file *file, char __user *user_buf, unsigned int len = 0; u32 filt = ath5k_hw_get_rx_filter(sc->ah); - len += snprintf(buf+len, sizeof(buf)-len, "bssid-mask: %pM\n", + len += snprintf(buf + len, sizeof(buf) - len, "bssid-mask: %pM\n", sc->bssidmask); - len += snprintf(buf+len, sizeof(buf)-len, "filter-flags: 0x%x ", + len += snprintf(buf + len, sizeof(buf) - len, "filter-flags: 0x%x ", filt); if (filt & AR5K_RX_FILTER_UCAST) - len += snprintf(buf+len, sizeof(buf)-len, " UCAST"); + len += snprintf(buf + len, sizeof(buf) - len, " UCAST"); if (filt & AR5K_RX_FILTER_MCAST) - len += snprintf(buf+len, sizeof(buf)-len, " MCAST"); + len += snprintf(buf + len, sizeof(buf) - len, " MCAST"); if (filt & AR5K_RX_FILTER_BCAST) - len += snprintf(buf+len, sizeof(buf)-len, " BCAST"); + len += snprintf(buf + len, sizeof(buf) - len, " BCAST"); if (filt & AR5K_RX_FILTER_CONTROL) - len += snprintf(buf+len, sizeof(buf)-len, " CONTROL"); + len += snprintf(buf + len, sizeof(buf) - len, " CONTROL"); if (filt & AR5K_RX_FILTER_BEACON) - len += snprintf(buf+len, sizeof(buf)-len, " BEACON"); + len += snprintf(buf + len, sizeof(buf) - len, " BEACON"); if (filt & AR5K_RX_FILTER_PROM) - len += snprintf(buf+len, sizeof(buf)-len, " PROM"); + len += snprintf(buf + len, sizeof(buf) - len, " PROM"); if (filt & AR5K_RX_FILTER_XRPOLL) - len += snprintf(buf+len, sizeof(buf)-len, " XRPOLL"); + len += snprintf(buf + len, sizeof(buf) - len, " XRPOLL"); if (filt & AR5K_RX_FILTER_PROBEREQ) - len += snprintf(buf+len, sizeof(buf)-len, " PROBEREQ"); + len += snprintf(buf + len, sizeof(buf) - len, " PROBEREQ"); if (filt & AR5K_RX_FILTER_PHYERR_5212) - len += snprintf(buf+len, sizeof(buf)-len, " PHYERR-5212"); + len += snprintf(buf + len, sizeof(buf) - len, " PHYERR-5212"); if (filt & AR5K_RX_FILTER_RADARERR_5212) - len += snprintf(buf+len, sizeof(buf)-len, " RADARERR-5212"); + len += snprintf(buf + len, sizeof(buf) - len, " RADARERR-5212"); if (filt & AR5K_RX_FILTER_PHYERR_5211) - snprintf(buf+len, sizeof(buf)-len, " PHYERR-5211"); + snprintf(buf + len, sizeof(buf) - len, " PHYERR-5211"); if (filt & AR5K_RX_FILTER_RADARERR_5211) - len += snprintf(buf+len, sizeof(buf)-len, " RADARERR-5211"); + len += snprintf(buf + len, sizeof(buf) - len, " RADARERR-5211"); - len += snprintf(buf+len, sizeof(buf)-len, "\nopmode: %s (%d)\n", + len += snprintf(buf + len, sizeof(buf) - len, "\nopmode: %s (%d)\n", ath_opmode_to_string(sc->opmode), sc->opmode); if (len > sizeof(buf)) @@ -550,65 +550,65 @@ static ssize_t read_file_frameerrors(struct file *file, char __user *user_buf, unsigned int len = 0; int i; - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "RX\n---------------------\n"); - len += snprintf(buf+len, sizeof(buf)-len, "CRC\t%u\t(%u%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, "CRC\t%u\t(%u%%)\n", st->rxerr_crc, st->rx_all_count > 0 ? - st->rxerr_crc*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "PHY\t%u\t(%u%%)\n", + st->rxerr_crc * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "PHY\t%u\t(%u%%)\n", st->rxerr_phy, st->rx_all_count > 0 ? - st->rxerr_phy*100/st->rx_all_count : 0); + st->rxerr_phy * 100 / st->rx_all_count : 0); for (i = 0; i < 32; i++) { if (st->rxerr_phy_code[i]) - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, " phy_err[%u]\t%u\n", i, st->rxerr_phy_code[i]); } - len += snprintf(buf+len, sizeof(buf)-len, "FIFO\t%u\t(%u%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n", st->rxerr_fifo, st->rx_all_count > 0 ? - st->rxerr_fifo*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "decrypt\t%u\t(%u%%)\n", + st->rxerr_fifo * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "decrypt\t%u\t(%u%%)\n", st->rxerr_decrypt, st->rx_all_count > 0 ? - st->rxerr_decrypt*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "MIC\t%u\t(%u%%)\n", + st->rxerr_decrypt * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "MIC\t%u\t(%u%%)\n", st->rxerr_mic, st->rx_all_count > 0 ? - st->rxerr_mic*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "process\t%u\t(%u%%)\n", + st->rxerr_mic * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "process\t%u\t(%u%%)\n", st->rxerr_proc, st->rx_all_count > 0 ? - st->rxerr_proc*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "jumbo\t%u\t(%u%%)\n", + st->rxerr_proc * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "jumbo\t%u\t(%u%%)\n", st->rxerr_jumbo, st->rx_all_count > 0 ? - st->rxerr_jumbo*100/st->rx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "[RX all\t%u]\n", + st->rxerr_jumbo * 100 / st->rx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "[RX all\t%u]\n", st->rx_all_count); - len += snprintf(buf+len, sizeof(buf)-len, "RX-all-bytes\t%u\n", + len += snprintf(buf + len, sizeof(buf) - len, "RX-all-bytes\t%u\n", st->rx_bytes_count); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "\nTX\n---------------------\n"); - len += snprintf(buf+len, sizeof(buf)-len, "retry\t%u\t(%u%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, "retry\t%u\t(%u%%)\n", st->txerr_retry, st->tx_all_count > 0 ? - st->txerr_retry*100/st->tx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "FIFO\t%u\t(%u%%)\n", + st->txerr_retry * 100 / st->tx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n", st->txerr_fifo, st->tx_all_count > 0 ? - st->txerr_fifo*100/st->tx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "filter\t%u\t(%u%%)\n", + st->txerr_fifo * 100 / st->tx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "filter\t%u\t(%u%%)\n", st->txerr_filt, st->tx_all_count > 0 ? - st->txerr_filt*100/st->tx_all_count : 0); - len += snprintf(buf+len, sizeof(buf)-len, "[TX all\t%u]\n", + st->txerr_filt * 100 / st->tx_all_count : 0); + len += snprintf(buf + len, sizeof(buf) - len, "[TX all\t%u]\n", st->tx_all_count); - len += snprintf(buf+len, sizeof(buf)-len, "TX-all-bytes\t%u\n", + len += snprintf(buf + len, sizeof(buf) - len, "TX-all-bytes\t%u\n", st->tx_bytes_count); if (len > sizeof(buf)) @@ -667,89 +667,93 @@ static ssize_t read_file_ani(struct file *file, char __user *user_buf, char buf[700]; unsigned int len = 0; - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "HW has PHY error counters:\t%s\n", sc->ah->ah_capabilities.cap_has_phyerr_counters ? "yes" : "no"); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "HW max spur immunity level:\t%d\n", as->max_spur_level); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "\nANI state\n--------------------------------------------\n"); - len += snprintf(buf+len, sizeof(buf)-len, "operating mode:\t\t\t"); + len += snprintf(buf + len, sizeof(buf) - len, "operating mode:\t\t\t"); switch (as->ani_mode) { case ATH5K_ANI_MODE_OFF: - len += snprintf(buf+len, sizeof(buf)-len, "OFF\n"); + len += snprintf(buf + len, sizeof(buf) - len, "OFF\n"); break; case ATH5K_ANI_MODE_MANUAL_LOW: - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "MANUAL LOW\n"); break; case ATH5K_ANI_MODE_MANUAL_HIGH: - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "MANUAL HIGH\n"); break; case ATH5K_ANI_MODE_AUTO: - len += snprintf(buf+len, sizeof(buf)-len, "AUTO\n"); + len += snprintf(buf + len, sizeof(buf) - len, "AUTO\n"); break; default: - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "??? (not good)\n"); break; } - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "noise immunity level:\t\t%d\n", as->noise_imm_level); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "spur immunity level:\t\t%d\n", as->spur_level); - len += snprintf(buf+len, sizeof(buf)-len, "firstep level:\t\t\t%d\n", + len += snprintf(buf + len, sizeof(buf) - len, + "firstep level:\t\t\t%d\n", as->firstep_level); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "OFDM weak signal detection:\t%s\n", as->ofdm_weak_sig ? "on" : "off"); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "CCK weak signal detection:\t%s\n", as->cck_weak_sig ? "on" : "off"); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "\nMIB INTERRUPTS:\t\t%u\n", st->mib_intr); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "beacon RSSI average:\t%d\n", (int)ewma_read(&sc->ah->ah_beacon_rssi_avg)); #define CC_PRINT(_struct, _field) \ _struct._field, \ _struct.cycles > 0 ? \ - _struct._field*100/_struct.cycles : 0 + _struct._field * 100 / _struct.cycles : 0 - len += snprintf(buf+len, sizeof(buf)-len, "profcnt tx\t\t%u\t(%d%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, + "profcnt tx\t\t%u\t(%d%%)\n", CC_PRINT(as->last_cc, tx_frame)); - len += snprintf(buf+len, sizeof(buf)-len, "profcnt rx\t\t%u\t(%d%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, + "profcnt rx\t\t%u\t(%d%%)\n", CC_PRINT(as->last_cc, rx_frame)); - len += snprintf(buf+len, sizeof(buf)-len, "profcnt busy\t\t%u\t(%d%%)\n", + len += snprintf(buf + len, sizeof(buf) - len, + "profcnt busy\t\t%u\t(%d%%)\n", CC_PRINT(as->last_cc, rx_busy)); #undef CC_PRINT - len += snprintf(buf+len, sizeof(buf)-len, "profcnt cycles\t\t%u\n", + len += snprintf(buf + len, sizeof(buf) - len, "profcnt cycles\t\t%u\n", as->last_cc.cycles); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "listen time\t\t%d\tlast: %d\n", as->listen_time, as->last_listen); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "OFDM errors\t\t%u\tlast: %u\tsum: %u\n", as->ofdm_errors, as->last_ofdm_errors, as->sum_ofdm_errors); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "CCK errors\t\t%u\tlast: %u\tsum: %u\n", as->cck_errors, as->last_cck_errors, as->sum_cck_errors); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_PHYERR_CNT1\t%x\t(=%d)\n", ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT1), ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT1))); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "AR5K_PHYERR_CNT2\t%x\t(=%d)\n", ath5k_hw_reg_read(sc->ah, AR5K_PHYERR_CNT2), ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - @@ -827,13 +831,13 @@ static ssize_t read_file_queue(struct file *file, char __user *user_buf, struct ath5k_buf *bf, *bf0; int i, n; - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "available txbuffers: %d\n", sc->txbuf_len); for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) { txq = &sc->txqs[i]; - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, "%02d: %ssetup\n", i, txq->setup ? "" : "not "); if (!txq->setup) @@ -845,9 +849,9 @@ static ssize_t read_file_queue(struct file *file, char __user *user_buf, n++; spin_unlock_bh(&txq->lock); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, " len: %d bufs: %d\n", txq->txq_len, n); - len += snprintf(buf+len, sizeof(buf)-len, + len += snprintf(buf + len, sizeof(buf) - len, " stuck: %d\n", txq->txq_stuck); } @@ -894,7 +898,7 @@ ath5k_debug_init_device(struct ath5k_softc *sc) phydir = debugfs_create_dir("ath5k", sc->hw->wiphy->debugfsdir); if (!phydir) - return; + return; debugfs_create_file("debug", S_IWUSR | S_IRUSR, phydir, sc, &fops_debug); @@ -918,6 +922,9 @@ ath5k_debug_init_device(struct ath5k_softc *sc) debugfs_create_file("queue", S_IWUSR | S_IRUSR, phydir, sc, &fops_queue); + + debugfs_create_bool("32khz_clock", S_IWUSR | S_IRUSR, phydir, + &sc->ah->ah_use_32khz_clock); } /* functions used in other places */ diff --git a/drivers/net/wireless/ath/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h index 2509d0bf037..cfd529b548f 100644 --- a/drivers/net/wireless/ath/ath5k/desc.h +++ b/drivers/net/wireless/ath/ath5k/desc.h @@ -58,11 +58,11 @@ struct ath5k_hw_rx_status { #define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 /* reception success */ #define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004 /* CRC error */ #define AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN_5210 0x00000008 /* [5210] FIFO overrun */ -#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 /* decyption CRC failure */ +#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 /* decryption CRC failure */ #define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR 0x000000e0 /* PHY error */ #define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR_S 5 #define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 /* key index valid */ -#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 /* decyption key index */ +#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 /* decryption key index */ #define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_S 9 #define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x0fff8000 /* 13 bit of TSF */ #define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 15 diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c index 21091c26a9a..b788ecfbdaf 100644 --- a/drivers/net/wireless/ath/ath5k/dma.c +++ b/drivers/net/wireless/ath/ath5k/dma.c @@ -25,7 +25,7 @@ * * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and * handle queue setup for 5210 chipset (rest are handled on qcu.c). - * Also we setup interrupt mask register (IMR) and read the various iterrupt + * Also we setup interrupt mask register (IMR) and read the various interrupt * status registers (ISR). * * TODO: Handle SISR on 5211+ and introduce a function to return the queue @@ -258,7 +258,7 @@ static int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) /* For 2413+ order PCU to drop packets using * QUIET mechanism */ if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) && - pending){ + pending) { /* Set periodicity and duration */ ath5k_hw_reg_write(ah, AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)| @@ -726,7 +726,7 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) int_mask |= AR5K_IMR_RXDOPPLER; /* Note: Per queue interrupt masks - * are set via reset_tx_queue (qcu.c) */ + * are set via ath5k_hw_reset_tx_queue() (qcu.c) */ ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2); @@ -783,7 +783,7 @@ void ath5k_hw_dma_init(struct ath5k_hw *ah) * for all PCI-E cards to be safe). * * XXX: need to check 5210 for this - * TODO: Check out tx triger level, it's always 64 on dumps but I + * TODO: Check out tx trigger level, it's always 64 on dumps but I * guess we can tweak it and see how it goes ;-) */ if (ah->ah_version != AR5K_AR5210) { diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 392771f9375..d9e605e3700 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -223,14 +223,14 @@ static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, ah->ah_ant_ctl[mode][AR5K_ANT_CTL] = (ee->ee_ant_control[mode][0] << 4); ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_A] = - ee->ee_ant_control[mode][1] | - (ee->ee_ant_control[mode][2] << 6) | + ee->ee_ant_control[mode][1] | + (ee->ee_ant_control[mode][2] << 6) | (ee->ee_ant_control[mode][3] << 12) | (ee->ee_ant_control[mode][4] << 18) | (ee->ee_ant_control[mode][5] << 24); ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_B] = - ee->ee_ant_control[mode][6] | - (ee->ee_ant_control[mode][7] << 6) | + ee->ee_ant_control[mode][6] | + (ee->ee_ant_control[mode][7] << 6) | (ee->ee_ant_control[mode][8] << 12) | (ee->ee_ant_control[mode][9] << 18) | (ee->ee_ant_control[mode][10] << 24); @@ -255,7 +255,7 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, ee->ee_n_piers[mode] = 0; AR5K_EEPROM_READ(o++, val); ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - switch(mode) { + switch (mode) { case AR5K_EEPROM_MODE_11A: ee->ee_ob[mode][3] = (val >> 5) & 0x7; ee->ee_db[mode][3] = (val >> 2) & 0x7; @@ -349,7 +349,7 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, /* Note: >= v5 have bg freq piers on another location * so these freq piers are ignored for >= v5 (should be 0xff * anyway) */ - switch(mode) { + switch (mode) { case AR5K_EEPROM_MODE_11A: if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_1) break; @@ -422,7 +422,7 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, if (ee->ee_version < AR5K_EEPROM_VERSION_5_0) goto done; - switch (mode){ + switch (mode) { case AR5K_EEPROM_MODE_11A: ee->ee_switch_settling_turbo[mode] = (val >> 6) & 0x7f; @@ -436,7 +436,7 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, ee->ee_adc_desired_size_turbo[mode] |= (val & 0x1) << 7; ee->ee_pga_desired_size_turbo[mode] = (val >> 1) & 0xff; - if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >=2) + if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >= 2) ee->ee_pd_gain_overlap = (val >> 9) & 0xf; break; case AR5K_EEPROM_MODE_11G: @@ -516,7 +516,7 @@ ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max, u16 val; ee->ee_n_piers[mode] = 0; - while(i < max) { + while (i < max) { AR5K_EEPROM_READ(o++, val); freq1 = val & 0xff; @@ -602,7 +602,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; struct ath5k_chan_pcal_info *pcal; - switch(mode) { + switch (mode) { case AR5K_EEPROM_MODE_11B: pcal = ee->ee_pwr_cal_b; break; @@ -634,7 +634,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) /* Used to match PCDAC steps with power values on RF5111 chips * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC * steps that match with the power values we read from eeprom. On - * older eeprom versions (< 3.2) these steps are equaly spaced at + * older eeprom versions (< 3.2) these steps are equally spaced at * 10% of the pcdac curve -until the curve reaches its maximum- * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2) * these 11 steps are spaced in a different way. This function returns @@ -644,10 +644,12 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) static inline void ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) { - static const u16 intercepts3[] = - { 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 }; - static const u16 intercepts3_2[] = - { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; + static const u16 intercepts3[] = { + 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 + }; + static const u16 intercepts3_2[] = { + 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 + }; const u16 *ip; int i; @@ -762,7 +764,7 @@ ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode, /* Fill raw dataset * (convert power to 0.25dB units - * for RF5112 combatibility) */ + * for RF5112 compatibility) */ for (point = 0; point < pd->pd_points; point++) { /* Absolute values */ @@ -796,7 +798,7 @@ ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) u16 val; offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); - switch(mode) { + switch (mode) { case AR5K_EEPROM_MODE_11A: if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) return 0; @@ -882,7 +884,7 @@ ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) * Read power calibration for RF5112 chips * * For RF5112 we have 4 XPD -eXternal Power Detector- curves - * for each calibrated channel on 0, -6, -12 and -18dbm but we only + * for each calibrated channel on 0, -6, -12 and -18dBm but we only * use the higher (3) and the lower (0) curves. Each curve has 0.5dB * power steps on x axis and PCDAC steps on y axis and looks like a * linear function. To recreate the curve and pass the power values @@ -1163,7 +1165,7 @@ ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode) { u32 offset = AR5K_EEPROM_CAL_DATA_START(ee->ee_misc4); - switch(mode) { + switch (mode) { case AR5K_EEPROM_MODE_11G: if (AR5K_EEPROM_HDR_11B(ee->ee_header)) offset += ath5k_pdgains_size_2413(ee, @@ -1239,7 +1241,7 @@ ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode, /* Fill raw dataset * convert all pwr levels to - * quarter dB for RF5112 combatibility */ + * quarter dB for RF5112 compatibility */ pd->pd_step[0] = pcinfo->pddac_i[pdg]; pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg]; @@ -1620,8 +1622,8 @@ ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) offset += AR5K_EEPROM_GROUPS_START(ee->ee_version); rep = ee->ee_ctl_pwr; - for(i = 0; i < ee->ee_ctls; i++) { - switch(ee->ee_ctl[i] & AR5K_CTL_MODE_M) { + for (i = 0; i < ee->ee_ctls; i++) { + switch (ee->ee_ctl[i] & AR5K_CTL_MODE_M) { case AR5K_CTL_11A: case AR5K_CTL_TURBO: ctl_mode = AR5K_EEPROM_MODE_11A; diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index 6511c27d938..dc2bcfeadeb 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -50,7 +50,7 @@ #define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ #define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ -#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ +#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2GHz (ar5211_rfregs) */ #define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ #define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ #define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */ @@ -75,11 +75,11 @@ #define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) #define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) #define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) -#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz */ +#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2GHz */ #define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for < 2W power consumption */ #define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) /* Device type (1 Cardbus, 2 PCI, 3 MiniPCI, 4 AP) */ #define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ -#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz */ +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5GHz */ /* Newer EEPROMs are using a different offset */ #define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ @@ -120,7 +120,7 @@ #define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1) /* disable fast frames */ #define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1) /* disable bursting */ #define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf) /* max number of QCUs. defaults to 10 */ -#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heayy clipping */ +#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heavy clipping */ #define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf) /* key cache size. defaults to 128 */ #define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10) @@ -223,7 +223,7 @@ #define AR5K_EEPROM_CCK_OFDM_DELTA 15 #define AR5K_EEPROM_N_IQ_CAL 2 /* 5GHz/2GHz */ -enum ath5k_eeprom_freq_bands{ +enum ath5k_eeprom_freq_bands { AR5K_EEPROM_BAND_5GHZ = 0, AR5K_EEPROM_BAND_2GHZ = 1, AR5K_EEPROM_N_FREQ_BANDS, @@ -270,7 +270,7 @@ enum ath5k_ctl_mode { /* Per channel calibration data, used for power table setup */ struct ath5k_chan_pcal_info_rf5111 { - /* Power levels in half dbm units + /* Power levels in half dBm units * for one power curve. */ u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; /* PCDAC table steps diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c index e49340d18df..855d1af3e71 100644 --- a/drivers/net/wireless/ath/ath5k/initvals.c +++ b/drivers/net/wireless/ath/ath5k/initvals.c @@ -113,8 +113,8 @@ static const struct ath5k_ini ar5210_ini[] = { { AR5K_PHY(28), 0x0000000f }, { AR5K_PHY(29), 0x00000080 }, { AR5K_PHY(30), 0x00000004 }, - { AR5K_PHY(31), 0x00000018 }, /* 0x987c */ - { AR5K_PHY(64), 0x00000000 }, /* 0x9900 */ + { AR5K_PHY(31), 0x00000018 }, /* 0x987c */ + { AR5K_PHY(64), 0x00000000 }, /* 0x9900 */ { AR5K_PHY(65), 0x00000000 }, { AR5K_PHY(66), 0x00000000 }, { AR5K_PHY(67), 0x00800000 }, @@ -549,7 +549,7 @@ static const struct ath5k_ini ar5212_ini_common_start[] = { { AR5K_DIAG_SW_5211, 0x00000000 }, { AR5K_ADDAC_TEST, 0x00000000 }, { AR5K_DEFAULT_ANTENNA, 0x00000000 }, - { AR5K_FRAME_CTL_QOSM, 0x000fc78f }, + { AR5K_FRAME_CTL_QOSM, 0x000fc78f }, { AR5K_XRMODE, 0x2a82301a }, { AR5K_XRDELAY, 0x05dc01e0 }, { AR5K_XRTIMEOUT, 0x1f402710 }, @@ -760,9 +760,9 @@ static const struct ath5k_ini_mode rf5111_ini_mode_end[] = { static const struct ath5k_ini rf5111_ini_common_end[] = { { AR5K_DCU_FP, 0x00000000 }, - { AR5K_PHY_AGC, 0x00000000 }, - { AR5K_PHY_ADC_CTL, 0x00022ffe }, - { 0x983c, 0x00020100 }, + { AR5K_PHY_AGC, 0x00000000 }, + { AR5K_PHY_ADC_CTL, 0x00022ffe }, + { 0x983c, 0x00020100 }, { AR5K_PHY_GAIN_OFFSET, 0x1284613c }, { AR5K_PHY_PAPD_PROBE, 0x00004883 }, { 0x9940, 0x00000004 }, @@ -1409,7 +1409,7 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu) * Write initial register settings */ - /* For AR5212 and combatible */ + /* For AR5212 and compatible */ if (ah->ah_version == AR5K_AR5212) { /* First set of mode-specific settings */ diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index 576edf2965d..127bfbd3517 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -43,16 +43,16 @@ #include "ath5k.h" #include "base.h" -#define ATH_SDEVICE(subv,subd) \ +#define ATH_SDEVICE(subv, subd) \ .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \ .subvendor = (subv), .subdevice = (subd) -#define ATH_LED(pin,polarity) .driver_data = (((pin) << 8) | (polarity)) +#define ATH_LED(pin, polarity) .driver_data = (((pin) << 8) | (polarity)) #define ATH_PIN(data) ((data) >> 8) #define ATH_POLARITY(data) ((data) & 0xff) /* Devices we match on for LED config info (typically laptops) */ -static const struct pci_device_id ath5k_led_devices[] = { +static DEFINE_PCI_DEVICE_TABLE(ath5k_led_devices) = { /* AR5211 */ { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5211), ATH_LED(0, 0) }, /* HP Compaq nc6xx, nc4000, nx6000 */ @@ -157,7 +157,7 @@ void ath5k_unregister_leds(struct ath5k_softc *sc) ath5k_unregister_led(&sc->tx_led); } -int ath5k_init_leds(struct ath5k_softc *sc) +int __devinit ath5k_init_leds(struct ath5k_softc *sc) { int ret = 0; struct ieee80211_hw *hw = sc->hw; diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index 493908299bb..0d5ab3428be 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -348,7 +348,7 @@ ath5k_prepare_multicast(struct ieee80211_hw *hw, mfilt[pos / 32] |= (1 << (pos % 32)); /* XXX: we might be able to just do this instead, * but not sure, needs testing, if we do use this we'd - * neet to inform below to not reset the mcast */ + * need to inform below not to reset the mcast */ /* ath5k_hw_set_mcast_filterindex(ah, * ha->addr[5]); */ } @@ -471,7 +471,7 @@ ath5k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, if (iter_data.n_stas > 1) { /* If you have multiple STA interfaces connected to * different APs, ARPs are not received (most of the time?) - * Enabling PROMISC appears to fix that probem. + * Enabling PROMISC appears to fix that problem. */ rfilt |= AR5K_RX_FILTER_PROM; } diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c index f2c0c236392..aac5b783194 100644 --- a/drivers/net/wireless/ath/ath5k/pci.c +++ b/drivers/net/wireless/ath/ath5k/pci.c @@ -34,12 +34,12 @@ static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = { { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */ { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */ { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */ - { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */ { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */ { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */ { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */ @@ -234,7 +234,7 @@ ath5k_pci_probe(struct pci_dev *pdev, mem = pci_iomap(pdev, 0, 0); if (!mem) { - dev_err(&pdev->dev, "cannot remap PCI memory region\n") ; + dev_err(&pdev->dev, "cannot remap PCI memory region\n"); ret = -EIO; goto err_reg; } diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index 712a9ac4000..618ee54d5fe 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -32,7 +32,7 @@ #include "base.h" /* - * AR5212+ can use higher rates for ack transmition + * AR5212+ can use higher rates for ack transmission * based on current tx rate instead of the base rate. * It does this to better utilize channel usage. * This is a mapping between G rates (that cover both @@ -534,9 +534,9 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) local_irq_restore(flags); - WARN_ON( i == ATH5K_MAX_TSF_READ ); + WARN_ON(i == ATH5K_MAX_TSF_READ); - return (((u64)tsf_upper1 << 32) | tsf_lower); + return ((u64)tsf_upper1 << 32) | tsf_lower; } /** @@ -643,14 +643,14 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) /* Flush any pending BMISS interrupts on ISR by * performing a clear-on-write operation on PISR * register for the BMISS bit (writing a bit on - * ISR togles a reset for that bit and leaves - * the rest bits intact) */ + * ISR toggles a reset for that bit and leaves + * the remaining bits intact) */ if (ah->ah_version == AR5K_AR5210) ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR); else ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR); - /* TODO: Set enchanced sleep registers on AR5212 + /* TODO: Set enhanced sleep registers on AR5212 * based on vif->bss_conf params, until then * disable power save reporting.*/ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV); @@ -738,7 +738,7 @@ ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval) dma = ath5k_hw_reg_read(ah, AR5K_TIMER1) >> 3; /* NOTE: SWBA is different. Having a wrong window there does not - * stop us from sending data and this condition is catched thru + * stop us from sending data and this condition is caught by * other means (SWBA interrupt) */ if (ath5k_check_timer_win(nbtt, atim, 1, intval) && @@ -896,7 +896,7 @@ void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* Set RSSI/BRSSI thresholds * * Note: If we decide to set this value - * dynamicaly, have in mind that when AR5K_RSSI_THR + * dynamically, have in mind that when AR5K_RSSI_THR * register is read it might return 0x40 if we haven't * wrote anything to it plus BMISS RSSI threshold is zeroed. * So doing a save/restore procedure here isn't the right diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 55441913344..dd2b417729b 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -105,6 +105,7 @@ bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, if ((ah->ah_radio == AR5K_RF5112) || (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2413) || (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) refclk_freq = 40; else @@ -173,7 +174,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, data = ath5k_hw_bitswap(val, num_bits); for (bits_shifted = 0, bits_left = num_bits; bits_left > 0; - position = 0, entry++) { + position = 0, entry++) { last_bit = (position + bits_left > 8) ? 8 : position + bits_left; @@ -363,7 +364,7 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) return 0; } -/* Schedule a gain probe check on the next transmited packet. +/* Schedule a gain probe check on the next transmitted packet. * That means our next packet is going to be sent with lower * tx power and a Peak to Average Power Detector (PAPD) will try * to measure the gain. @@ -472,7 +473,7 @@ static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) level[0] = 0; level[1] = (step == 63) ? 50 : step + 4; level[2] = (step != 63) ? 64 : level[0]; - level[3] = level[2] + 50 ; + level[3] = level[2] + 50; ah->ah_gain.g_high = level[3] - (step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5); @@ -549,7 +550,7 @@ static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah) for (ah->ah_gain.g_target = ah->ah_gain.g_current; ah->ah_gain.g_target <= ah->ah_gain.g_low && - ah->ah_gain.g_step_idx < go->go_steps_count-1; + ah->ah_gain.g_step_idx < go->go_steps_count - 1; g_step = &go->go_step[ah->ah_gain.g_step_idx]) ah->ah_gain.g_target -= 2 * (go->go_step[++ah->ah_gain.g_step_idx].gos_gain - @@ -614,13 +615,13 @@ enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah) ath5k_hw_rf_gainf_corr(ah); ah->ah_gain.g_current = ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ? - (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) : + (ah->ah_gain.g_current - ah->ah_gain.g_f_corr) : 0; } /* Check if measurement is ok and if we need * to adjust gain, schedule a gain adjustment, - * else switch back to the acive state */ + * else switch back to the active state */ if (ath5k_hw_rf_check_gainf_readback(ah) && AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) && ath5k_hw_rf_gainf_adjust(ah)) { @@ -807,7 +808,7 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah, * use b_OB and b_DB parameters stored * in eeprom on ee->ee_ob[ee_mode][0] * - * For all other chips we use OB/DB for 2Ghz + * For all other chips we use OB/DB for 2GHz * stored in the b/g modal section just like * 802.11a on ee->ee_ob[ee_mode][1] */ if ((ah->ah_radio == AR5K_RF5111) || @@ -970,17 +971,20 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah, } /* Lower synth voltage on Rev 2 */ - ath5k_hw_rfb_op(ah, rf_regs, 2, - AR5K_RF_HIGH_VC_CP, true); + if (ah->ah_radio == AR5K_RF5112 && + (ah->ah_radio_5ghz_revision & AR5K_SREV_REV) > 0) { + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_HIGH_VC_CP, true); - ath5k_hw_rfb_op(ah, rf_regs, 2, - AR5K_RF_MID_VC_CP, true); + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_MID_VC_CP, true); - ath5k_hw_rfb_op(ah, rf_regs, 2, - AR5K_RF_LOW_VC_CP, true); + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_LOW_VC_CP, true); - ath5k_hw_rfb_op(ah, rf_regs, 2, - AR5K_RF_PUSH_UP, true); + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_PUSH_UP, true); + } /* Decrease power consumption on 5213+ BaseBand */ if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { @@ -1259,7 +1263,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah, { int ret; /* - * Check bounds supported by the PHY (we don't care about regultory + * Check bounds supported by the PHY (we don't care about regulatory * restrictions at this point). Note: hw_value already has the band * (CHANNEL_2GHZ, or CHANNEL_5GHZ) so we inform ath5k_channel_ok() * of the band by that */ @@ -1331,7 +1335,7 @@ void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah) static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor) { struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist; - hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX-1); + hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX - 1); hist->nfval[hist->index] = noise_floor; } @@ -1344,10 +1348,10 @@ static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah) memcpy(sort, ah->ah_nfcal_hist.nfval, sizeof(sort)); for (i = 0; i < ATH5K_NF_CAL_HIST_MAX - 1; i++) { for (j = 1; j < ATH5K_NF_CAL_HIST_MAX - i; j++) { - if (sort[j] > sort[j-1]) { + if (sort[j] > sort[j - 1]) { tmp = sort[j]; - sort[j] = sort[j-1]; - sort[j-1] = tmp; + sort[j] = sort[j - 1]; + sort[j - 1] = tmp; } } } @@ -1355,7 +1359,7 @@ static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah) ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, "cal %d:%d\n", i, sort[i]); } - return sort[(ATH5K_NF_CAL_HIST_MAX-1) / 2]; + return sort[(ATH5K_NF_CAL_HIST_MAX - 1) / 2]; } /* @@ -1604,11 +1608,13 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, int ret; if (ah->ah_radio == AR5K_RF5110) - ret = ath5k_hw_rf5110_calibrate(ah, channel); - else { - ret = ath5k_hw_rf511x_iq_calibrate(ah); + return ath5k_hw_rf5110_calibrate(ah, channel); + + ret = ath5k_hw_rf511x_iq_calibrate(ah); + + if ((ah->ah_radio == AR5K_RF5111 || ah->ah_radio == AR5K_RF5112) && + (channel->hw_value & CHANNEL_OFDM)) ath5k_hw_request_rfgain_probe(ah); - } return ret; } @@ -1815,7 +1821,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, } else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_SPUR_FILT_EN) { - /* Clean up spur mitigation settings and disable fliter */ + /* Clean up spur mitigation settings and disable filter */ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL, AR5K_PHY_BIN_MASK_CTL_RATE, 0); AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_IQ, @@ -2080,7 +2086,7 @@ ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right, * always 1 instead of 1.25, 1.75 etc). We scale up by 100 * to have some accuracy both for 0.5 and 0.25 steps. */ - ratio = ((100 * y_right - 100 * y_left)/(x_right - x_left)); + ratio = ((100 * y_right - 100 * y_left) / (x_right - x_left)); /* Now scale down to be in range */ result = y_left + (ratio * (target - x_left) / 100); @@ -2159,7 +2165,7 @@ ath5k_create_power_curve(s16 pmin, s16 pmax, u8 *vpd_table, u8 type) { u8 idx[2] = { 0, 1 }; - s16 pwr_i = 2*pmin; + s16 pwr_i = 2 * pmin; int i; if (num_points < 2) @@ -2437,7 +2443,7 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah, } if (edge_pwr) - ah->ah_txpower.txp_max_pwr = 4*min(edge_pwr, max_chan_pwr); + ah->ah_txpower.txp_max_pwr = 4 * min(edge_pwr, max_chan_pwr); } @@ -2456,7 +2462,7 @@ static void ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min, s16 *table_max) { - u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; u8 *pcdac_tmp = ah->ah_txpower.tmpL[0]; u8 pcdac_0, pcdac_n, pcdac_i, pwr_idx, i; s16 min_pwr, max_pwr; @@ -2475,8 +2481,8 @@ ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min, /* Copy values from pcdac_tmp */ pwr_idx = min_pwr; - for (i = 0 ; pwr_idx <= max_pwr && - pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) { + for (i = 0; pwr_idx <= max_pwr && + pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) { pcdac_out[pcdac_i++] = pcdac_tmp[i]; pwr_idx++; } @@ -2502,7 +2508,7 @@ static void ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, s16 *table_max, u8 pdcurves) { - u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; u8 *pcdac_low_pwr; u8 *pcdac_high_pwr; u8 *pcdac_tmp; @@ -2510,8 +2516,8 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, s16 max_pwr_idx; s16 min_pwr_idx; s16 mid_pwr_idx = 0; - /* Edge flag turs on the 7nth bit on the PCDAC - * to delcare the higher power curve (force values + /* Edge flag turns on the 7nth bit on the PCDAC + * to declare the higher power curve (force values * to be greater than 64). If we only have one curve * we don't need to set this, if we have 2 curves and * fill the table backwards this can also be used to @@ -2552,7 +2558,7 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, } /* This is used when setting tx power*/ - ah->ah_txpower.txp_min_idx = min_pwr_idx/2; + ah->ah_txpower.txp_min_idx = min_pwr_idx / 2; /* Fill Power to PCDAC table backwards */ pwr = max_pwr_idx; @@ -2561,14 +2567,14 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, * edge flag and set pcdac_tmp to lower * power curve.*/ if (edge_flag == 0x40 && - (2*pwr <= (table_max[1] - table_min[0]) || pwr == 0)) { + (2 * pwr <= (table_max[1] - table_min[0]) || pwr == 0)) { edge_flag = 0x00; pcdac_tmp = pcdac_low_pwr; - pwr = mid_pwr_idx/2; + pwr = mid_pwr_idx / 2; } /* Don't go below 1, extrapolate below if we have - * already swithced to the lower power curve -or + * already switched to the lower power curve -or * we only have one curve and edge_flag is zero * anyway */ if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) { @@ -2596,7 +2602,7 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, static void ath5k_write_pcdac_table(struct ath5k_hw *ah) { - u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; int i; /* @@ -2604,8 +2610,8 @@ ath5k_write_pcdac_table(struct ath5k_hw *ah) */ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { ath5k_hw_reg_write(ah, - (((pcdac_out[2*i + 0] << 8 | 0xff) & 0xffff) << 0) | - (((pcdac_out[2*i + 1] << 8 | 0xff) & 0xffff) << 16), + (((pcdac_out[2 * i + 0] << 8 | 0xff) & 0xffff) << 0) | + (((pcdac_out[2 * i + 1] << 8 | 0xff) & 0xffff) << 16), AR5K_PHY_PCDAC_TXPOWER(i)); } } @@ -2789,10 +2795,10 @@ ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode) */ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { ath5k_hw_reg_write(ah, - ((pdadc_out[4*i + 0] & 0xff) << 0) | - ((pdadc_out[4*i + 1] & 0xff) << 8) | - ((pdadc_out[4*i + 2] & 0xff) << 16) | - ((pdadc_out[4*i + 3] & 0xff) << 24), + ((pdadc_out[4 * i + 0] & 0xff) << 0) | + ((pdadc_out[4 * i + 1] & 0xff) << 8) | + ((pdadc_out[4 * i + 2] & 0xff) << 16) | + ((pdadc_out[4 * i + 3] & 0xff) << 24), AR5K_PHY_PDADC_TXPOWER(i)); } } @@ -2805,7 +2811,7 @@ ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode) /* * This is the main function that uses all of the above * to set PCDAC/PDADC table on hw for the current channel. - * This table is used for tx power calibration on the basband, + * This table is used for tx power calibration on the baseband, * without it we get weird tx power levels and in some cases * distorted spectral mask */ diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index d12b827033c..f5c1000045d 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -72,7 +72,7 @@ #define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */ #define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */ #define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */ -#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */ +#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */ #define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */ #define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */ #define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */ @@ -170,7 +170,7 @@ #define AR5K_TXCFG_SDMAMR_S 0 #define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ #define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ -#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ +#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Trigger level mask */ #define AR5K_TXCFG_TXFULL_S 4 #define AR5K_TXCFG_TXFULL_0B 0x00000000 #define AR5K_TXCFG_TXFULL_64B 0x00000010 @@ -283,16 +283,16 @@ */ #define AR5K_ISR 0x001c /* Register Address [5210] */ #define AR5K_PISR 0x0080 /* Register Address [5211+] */ -#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly received */ +#define AR5K_ISR_RXOK 0x00000001 /* Frame successfully received */ #define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ #define AR5K_ISR_RXERR 0x00000004 /* Receive error */ #define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ #define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */ #define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */ -#define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */ +#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */ #define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ #define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ -#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */ +#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) */ #define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ #define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ #define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ @@ -303,7 +303,7 @@ #define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ #define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ #define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ -#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ +#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ #define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ #define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ #define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ @@ -377,16 +377,16 @@ */ #define AR5K_IMR 0x0020 /* Register Address [5210] */ #define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ -#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly received*/ +#define AR5K_IMR_RXOK 0x00000001 /* Frame successfully received*/ #define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ #define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ #define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ #define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/ #define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/ -#define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/ +#define AR5K_IMR_TXOK 0x00000040 /* Frame successfully transmitted*/ #define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/ #define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/ -#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/ +#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)*/ #define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ #define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ #define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ @@ -397,7 +397,7 @@ #define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ #define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ #define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ -#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ +#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ #define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ #define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ #define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ @@ -601,7 +601,7 @@ * QCU misc registers */ #define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ -#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ +#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame scheduling mask */ #define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ #define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ #define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ @@ -653,13 +653,13 @@ * registers [5211+] * * These registers control the various characteristics of each queue - * for 802.11e (WME) combatibility so they go together with + * for 802.11e (WME) compatibility so they go together with * QCU registers in pairs. For each queue we have a QCU mask register, * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c), * a retry limit register (0x1080 - 0x10ac), a channel time register * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and * a sequence number register (0x1140 - 0x116c). It seems that "global" - * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). + * registers here affect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). * We use the same macros here for easier register access. * */ @@ -779,7 +779,7 @@ * and it's used for generating pseudo-random * number sequences. * - * (If i understand corectly, random numbers are + * (If i understand correctly, random numbers are * used for idle sensing -multiplied with cwmin/max etc-) */ #define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ @@ -1007,7 +1007,7 @@ #define AR5K_PCIE_WAEN 0x407c /* - * PCI-E Serializer/Desirializer + * PCI-E Serializer/Deserializer * registers */ #define AR5K_PCIE_SERDES 0x4080 @@ -1227,7 +1227,7 @@ AR5K_USEC_5210 : AR5K_USEC_5211) #define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ #define AR5K_USEC_1_S 0 -#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */ +#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32MHz clock */ #define AR5K_USEC_32_S 7 #define AR5K_USEC_TX_LATENCY_5211 0x007fc000 #define AR5K_USEC_TX_LATENCY_5211_S 14 @@ -1328,16 +1328,16 @@ #define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */ #define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \ AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211) -#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */ -#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */ -#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */ -#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */ -#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */ -#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */ -#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */ +#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */ +#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */ +#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */ +#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */ +#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */ +#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */ +#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */ #define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */ #define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */ -#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */ +#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */ #define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */ #define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */ #define AR5K_RX_FILTER_PHYERR \ @@ -1461,7 +1461,7 @@ * ADDAC test register [5211+] */ #define AR5K_ADDAC_TEST 0x8054 /* Register Address */ -#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ +#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ #define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */ #define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */ #define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */ @@ -1632,7 +1632,7 @@ #define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ #define AR5K_SLEEP0_NEXT_DTIM_S 0 #define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ -#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */ +#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enhanced sleep control */ #define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ #define AR5K_SLEEP0_CABTO_S 24 @@ -1657,7 +1657,7 @@ /* * TX power control (TPC) register * - * XXX: PCDAC steps (0.5dbm) or DBM ? + * XXX: PCDAC steps (0.5dBm) or dBm ? * */ #define AR5K_TXPC 0x80e8 /* Register Address */ @@ -1673,7 +1673,7 @@ /* * Profile count registers * - * These registers can be cleared and freezed with ATH5K_MIBC, but they do not + * These registers can be cleared and frozen with ATH5K_MIBC, but they do not * generate a MIB interrupt. * Instead of overflowing, they shift by one bit to the right. All registers * shift together, i.e. when one reaches the max, all shift at the same time by @@ -1838,7 +1838,7 @@ #define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/ #define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */ #define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */ -#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */ +#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32kHz external) */ #define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ #define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ #define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ @@ -2002,7 +2002,7 @@ #define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */ #define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ #define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */ -#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */ +#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automatically */ /* * PHY noise floor status register (CCA = Clear Channel Assessment) @@ -2038,7 +2038,7 @@ #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24 /* Low thresholds */ -#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c +#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c #define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001 #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00 #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8 @@ -2089,7 +2089,7 @@ * * It's obvious from the code that 0x989c is the buffer register but * for the other special registers that we write to after sending each - * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers + * packet, i have no idea. So I'll name them BUFFER_CONTROL_X registers * for now. It's interesting that they are also used for some other operations. */ @@ -2259,12 +2259,13 @@ #define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */ #define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000 #define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */ -#define AR5K_PHY_FRAME_CTL_INI AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ - AR5K_PHY_FRAME_CTL_TXURN_ERR | \ - AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ - AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \ - AR5K_PHY_FRAME_CTL_PARITY_ERR | \ - AR5K_PHY_FRAME_CTL_TIMING_ERR +#define AR5K_PHY_FRAME_CTL_INI \ + (AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ + AR5K_PHY_FRAME_CTL_TXURN_ERR | \ + AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ + AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \ + AR5K_PHY_FRAME_CTL_PARITY_ERR | \ + AR5K_PHY_FRAME_CTL_TIMING_ERR) /* * PHY Tx Power adjustment register [5212A+] @@ -2281,22 +2282,22 @@ #define AR5K_PHY_RADAR 0x9954 #define AR5K_PHY_RADAR_ENABLE 0x00000001 #define AR5K_PHY_RADAR_DISABLE 0x00000000 -#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold +#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold 5-bits, units unknown {0..31} (? MHz ?) */ #define AR5K_PHY_RADAR_INBANDTHR_S 1 -#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold +#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold 6-bits, dBm range {0..63} in dBm units. */ #define AR5K_PHY_RADAR_PRSSI_THR_S 6 -#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold +#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold 6-bits, dBm range {0..63} in dBm units. */ #define AR5K_PHY_RADAR_PHEIGHT_THR_S 12 -#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. +#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. 6-bits, dBm range {0..63} in dBm units. */ #define AR5K_PHY_RADAR_RSSI_THR_S 18 @@ -2339,7 +2340,7 @@ #define AR5K_PHY_RESTART_DIV_GC_S 18 /* - * RF Bus access request register (for synth-oly channel switching) + * RF Bus access request register (for synth-only channel switching) */ #define AR5K_PHY_RFBUS_REQ 0x997C #define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 @@ -2381,7 +2382,7 @@ */ #define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ #define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) -#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ +#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplifier Gain table base address */ #define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) /* diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 1676a3e3dc3..9f9c2ad3ca6 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -25,7 +25,7 @@ #include <asm/unaligned.h> -#include <linux/pci.h> /* To determine if a card is pci-e */ +#include <linux/pci.h> /* To determine if a card is pci-e */ #include <linux/log2.h> #include <linux/platform_device.h> #include "ath5k.h" @@ -142,10 +142,11 @@ static void ath5k_hw_init_core_clock(struct ath5k_hw *ah) /* Set 32MHz USEC counter */ if ((ah->ah_radio == AR5K_RF5112) || - (ah->ah_radio == AR5K_RF5413) || - (ah->ah_radio == AR5K_RF2316) || - (ah->ah_radio == AR5K_RF2317)) - /* Remain on 40MHz clock ? */ + (ah->ah_radio == AR5K_RF2413) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_radio == AR5K_RF2317)) + /* Remain on 40MHz clock ? */ sclock = 40 - 1; else sclock = 32 - 1; @@ -213,7 +214,7 @@ static void ath5k_hw_init_core_clock(struct ath5k_hw *ah) usec_reg = (usec | sclock | txlat | rxlat); ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC); - /* On 5112 set tx frane to tx data start delay */ + /* On 5112 set tx frame to tx data start delay */ if (ah->ah_radio == AR5K_RF5112) { AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2, AR5K_PHY_RF_CTL2_TXF2TXD_START, @@ -233,7 +234,7 @@ static void ath5k_hw_init_core_clock(struct ath5k_hw *ah) static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 scal, spending; + u32 scal, spending, sclock; /* Only set 32KHz settings if we have an external * 32KHz crystal present */ @@ -317,6 +318,15 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) /* Set up tsf increment on each cycle */ AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_radio == AR5K_RF2317)) + sclock = 40 - 1; + else + sclock = 32 - 1; + AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, sclock); } } @@ -375,7 +385,7 @@ static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) static int ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) { u32 mask = flags ? flags : ~0U; - volatile __iomem u32 *reg; + u32 __iomem *reg; u32 regval; u32 val = 0; @@ -539,7 +549,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) * * Note: putting PCI core on warm reset on PCI-E cards * results card to hang and always return 0xffff... so - * we ingore that flag for PCI-E cards. On PCI cards + * we ignore that flag for PCI-E cards. On PCI cards * this flag gets cleared after 64 PCI clocks. */ bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; @@ -596,7 +606,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) * * Note: putting PCI core on warm reset on PCI-E cards * results card to hang and always return 0xffff... so - * we ingore that flag for PCI-E cards. On PCI cards + * we ignore that flag for PCI-E cards. On PCI cards * this flag gets cleared after 64 PCI clocks. */ bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; @@ -627,7 +637,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) return ret; } - /* ...reset configuration regiter on Wisoc ... + /* ...reset configuration register on Wisoc ... * ...clear reset control register and pull device out of * warm reset on others */ if (ath5k_get_bus_type(ah) == ATH_AHB) @@ -704,7 +714,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) /*XXX: Can bwmode be used with dynamic mode ? * (I don't think it supports 44MHz) */ - /* On 2425 initvals TURBO_SHORT is not pressent */ + /* On 2425 initvals TURBO_SHORT is not present */ if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { turbo = AR5K_PHY_TURBO_MODE | (ah->ah_radio == AR5K_RF2425) ? 0 : @@ -1277,11 +1287,16 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, ath5k_hw_dma_init(ah); - /* Enable 32KHz clock function for AR5212+ chips + /* + * Enable 32KHz clock function for AR5212+ chips * Set clocks to 32KHz operation and use an * external 32KHz crystal when sleeping if one - * exists */ - if (ah->ah_version == AR5K_AR5212 && + * exists. + * Disabled by default because it is also disabled in + * other drivers and it is known to cause stability + * issues on some devices + */ + if (ah->ah_use_32khz_clock && ah->ah_version == AR5K_AR5212 && op_mode != NL80211_IFTYPE_AP) ath5k_hw_set_sleep_clock(ah, true); diff --git a/drivers/net/wireless/ath/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h index 16b67e84906..5d11c23b429 100644 --- a/drivers/net/wireless/ath/ath5k/rfbuffer.h +++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h @@ -254,7 +254,7 @@ static const struct ath5k_ini_rfbuffer rfb_5111[] = { /* RFX112 (Derby 1) */ -/* BANK 6 len pos col */ +/* BANK 6 len pos col */ #define AR5K_RF5112_OB_2GHZ { 3, 269, 0 } #define AR5K_RF5112_DB_2GHZ { 3, 272, 0 } @@ -495,7 +495,7 @@ static const struct ath5k_ini_rfbuffer rfb_5112a[] = { /* BANK 2 len pos col */ #define AR5K_RF2413_RF_TURBO { 1, 1, 2 } -/* BANK 6 len pos col */ +/* BANK 6 len pos col */ #define AR5K_RF2413_OB_2GHZ { 3, 168, 0 } #define AR5K_RF2413_DB_2GHZ { 3, 165, 0 } diff --git a/drivers/net/wireless/ath/ath5k/rfgain.h b/drivers/net/wireless/ath/ath5k/rfgain.h index 1354d8c392c..ebfae052d89 100644 --- a/drivers/net/wireless/ath/ath5k/rfgain.h +++ b/drivers/net/wireless/ath/ath5k/rfgain.h @@ -30,7 +30,7 @@ struct ath5k_ini_rfgain { /* Initial RF Gain settings for RF5111 */ static const struct ath5k_ini_rfgain rfgain_5111[] = { - /* 5Ghz 2Ghz */ + /* 5GHz 2GHz */ { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } }, { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } }, { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } }, @@ -99,7 +99,7 @@ static const struct ath5k_ini_rfgain rfgain_5111[] = { /* Initial RF Gain settings for RF5112 */ static const struct ath5k_ini_rfgain rfgain_5112[] = { - /* 5Ghz 2Ghz */ + /* 5GHz 2GHz */ { AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } }, { AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } }, { AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } }, @@ -305,7 +305,7 @@ static const struct ath5k_ini_rfgain rfgain_2316[] = { /* Initial RF Gain settings for RF5413 */ static const struct ath5k_ini_rfgain rfgain_5413[] = { - /* 5Ghz 2Ghz */ + /* 5GHz 2GHz */ { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, { AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } }, { AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } }, @@ -452,7 +452,7 @@ static const struct ath5k_ini_rfgain rfgain_2425[] = { /* Check if our current measurement is inside our * current variable attenuation window */ -#define AR5K_GAIN_CHECK_ADJUST(_g) \ +#define AR5K_GAIN_CHECK_ADJUST(_g) \ ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) struct ath5k_gain_opt_step { diff --git a/drivers/net/wireless/ath/ath5k/sysfs.c b/drivers/net/wireless/ath/ath5k/sysfs.c index a073cdce1f1..d8ad0e45e1c 100644 --- a/drivers/net/wireless/ath/ath5k/sysfs.c +++ b/drivers/net/wireless/ath/ath5k/sysfs.c @@ -12,7 +12,7 @@ static ssize_t ath5k_attr_show_##name(struct device *dev, \ { \ struct ieee80211_hw *hw = dev_get_drvdata(dev); \ struct ath5k_softc *sc = hw->priv; \ - return snprintf(buf, PAGE_SIZE, "%d\n", get); \ + return snprintf(buf, PAGE_SIZE, "%d\n", get); \ } \ \ static ssize_t ath5k_attr_store_##name(struct device *dev, \ @@ -21,9 +21,11 @@ static ssize_t ath5k_attr_store_##name(struct device *dev, \ { \ struct ieee80211_hw *hw = dev_get_drvdata(dev); \ struct ath5k_softc *sc = hw->priv; \ - int val; \ + int val, ret; \ \ - val = (int)simple_strtoul(buf, NULL, 10); \ + ret = kstrtoint(buf, 10, &val); \ + if (ret < 0) \ + return ret; \ set(sc->ah, val); \ return count; \ } \ @@ -37,7 +39,7 @@ static ssize_t ath5k_attr_show_##name(struct device *dev, \ { \ struct ieee80211_hw *hw = dev_get_drvdata(dev); \ struct ath5k_softc *sc = hw->priv; \ - return snprintf(buf, PAGE_SIZE, "%d\n", get); \ + return snprintf(buf, PAGE_SIZE, "%d\n", get); \ } \ static DEVICE_ATTR(name, S_IRUGO, ath5k_attr_show_##name, NULL) diff --git a/drivers/net/wireless/ath/ath5k/trace.h b/drivers/net/wireless/ath/ath5k/trace.h index 2de68adb624..235e0768ce1 100644 --- a/drivers/net/wireless/ath/ath5k/trace.h +++ b/drivers/net/wireless/ath/ath5k/trace.h @@ -12,9 +12,6 @@ static inline void trace_ ## name(proto) {} struct sk_buff; -#define PRIV_ENTRY __field(struct ath5k_softc *, priv) -#define PRIV_ASSIGN __entry->priv = priv - #undef TRACE_SYSTEM #define TRACE_SYSTEM ath5k @@ -22,12 +19,12 @@ TRACE_EVENT(ath5k_rx, TP_PROTO(struct ath5k_softc *priv, struct sk_buff *skb), TP_ARGS(priv, skb), TP_STRUCT__entry( - PRIV_ENTRY + __field(struct ath5k_softc *, priv) __field(unsigned long, skbaddr) __dynamic_array(u8, frame, skb->len) ), TP_fast_assign( - PRIV_ASSIGN; + __entry->priv = priv; __entry->skbaddr = (unsigned long) skb; memcpy(__get_dynamic_array(frame), skb->data, skb->len); ), @@ -43,14 +40,14 @@ TRACE_EVENT(ath5k_tx, TP_ARGS(priv, skb, q), TP_STRUCT__entry( - PRIV_ENTRY + __field(struct ath5k_softc *, priv) __field(unsigned long, skbaddr) __field(u8, qnum) __dynamic_array(u8, frame, skb->len) ), TP_fast_assign( - PRIV_ASSIGN; + __entry->priv = priv; __entry->skbaddr = (unsigned long) skb; __entry->qnum = (u8) q->qnum; memcpy(__get_dynamic_array(frame), skb->data, skb->len); @@ -69,7 +66,7 @@ TRACE_EVENT(ath5k_tx_complete, TP_ARGS(priv, skb, q, ts), TP_STRUCT__entry( - PRIV_ENTRY + __field(struct ath5k_softc *, priv) __field(unsigned long, skbaddr) __field(u8, qnum) __field(u8, ts_status) @@ -78,7 +75,7 @@ TRACE_EVENT(ath5k_tx_complete, ), TP_fast_assign( - PRIV_ASSIGN; + __entry->priv = priv; __entry->skbaddr = (unsigned long) skb; __entry->qnum = (u8) q->qnum; __entry->ts_status = ts->ts_status; |