Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

 1) Get rid of the error prone NLA_PUT*() macros that used an embedded
    goto.

 2) Kill off the token-ring and MCA networking drivers, from Paul
    Gortmaker.

 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from
    Eric Dumazet.

 4) Add PTP hardware clock support to IGB and IXGBE, from Richard
    Cochran and Jacob Keller.

 5) Allow users to query timestamping capabilities of a card via
    ethtool, from Richard Cochran.

 6) Add loadbalance mode to the teaming driver, from Jiri Pirko.  Part
    of this is that we can now have BPF filters not attached to sockets,
    and the loadbalancing function is calculated using one.

 7) Francois Romieu went through the network drivers removing gratuitous
    uses of netdev->base_addr, perhaps some day we can remove it
    completely but it's used for ISA probing still.

 8) Add a BPF JIT for sparc.  I know, who cares, right? :-)

 9) Move networking sysctl registry away from using the compatability
    mode interfaces in the sysctl code.  From Eric W Biederman.

10) Pavel Emelyanov added a way to save and restore TCP socket state via
    TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as
    well as a way to forcefully bind a socket to a port via the
    sk->sk_reuse value SK_FORCE_REUSE.  There is also a
    TCP_REPAIR_OPTIONS which allows to reinstante the TCP options
    enabled on the connection.

11) Several enhancements from Eric Dumazet that, in particular, can
    enhance splice performance on TCP sockets significantly.

     a) Reset the offset of the per-socket sendmsg page when we know
        we're the only use of the page in linear_to_page().

     b) Add facilities such that skb->data can be backed a page rather
        than SLAB kmalloc'd memory.  In particular devices which were
        receiving into linear RX buffers can now end up providing paged
        data.

    The big result is that code like splice and GRO do not have to copy
    any more.

12) Allow a pure sender to more gracefully handle ACK backlogs in TCP.
    What can happen at high rates is that the sender hasn't grown his
    receive buffer limits at all (he's not receiving data so really
    doesn't need to), but the non-data ACKs consume receive buffer
    space.

    sk_add_backlog() is too aggressive in dropping frames in this case,
    so relax it's requirements by using the receive buffer plus the send
    buffer limit as the backlog limit instead of just the former.

    Also from Eric Dumazet.

13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and
    Chris Elston.

14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng.
    Basically, we can start fast retransmit before hiting the dupack
    threshold under certain conditions.

15) New CODEL active queue management packet scheduler, from Eric
    Dumazet based upon initial work by Dave Taht.

    Basically, the big feature is that packets are dropped (or ECN bits
    are set) based upon how long packets live in the queue, rather than
    the queue length (which is what RED uses).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits)
  drivers/net/stmmac: seq_file fix memory leak
  ipv6/exthdrs: strict Pad1 and PadN check
  USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
  USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z
  USB: qmi_wwan: Make forced int 4 whitelist generic
  net/ipv4: replace simple_strtoul with kstrtoul
  net/ipv4/ipconfig: neaten __setup placement
  net: qmi_wwan: Add Vodafone/Huawei K5005 support
  net: cdc_ether: Add ZTE WWAN matches before generic Ethernet
  ipv6: use skb coalescing in reassembly
  ipv4: use skb coalescing in defragmentation
  net: introduce skb_try_coalesce()
  net:ipv6:fixed space issues relating to operators.
  net:ipv6:fixed a trailing white space issue.
  ipv6: disable GSO on sockets hitting dst_allfrag
  tg3: use netdev_alloc_frag() API
  net: napi_frags_skb() is static
  ppp: avoid false drop_monitor false positives
  ipv6: bool/const conversions phase2
  ipx: Remove spurious NULL checking in ipx_ioctl().
  ...

1 files changed, 781 insertions, 4 deletions

diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c
index 325b1224c2b..ec7f1f5fd1c 100644
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -21,15 +21,77 @@
 #include "debug.h"
 #include "core.h"
 
+/* constants */
+#define TX_URB_COUNT            32
+#define RX_URB_COUNT            32
+#define ATH6KL_USB_RX_BUFFER_SIZE  1700
+
+/* tx/rx pipes for usb */
+enum ATH6KL_USB_PIPE_ID {
+	ATH6KL_USB_PIPE_TX_CTRL = 0,
+	ATH6KL_USB_PIPE_TX_DATA_LP,
+	ATH6KL_USB_PIPE_TX_DATA_MP,
+	ATH6KL_USB_PIPE_TX_DATA_HP,
+	ATH6KL_USB_PIPE_RX_CTRL,
+	ATH6KL_USB_PIPE_RX_DATA,
+	ATH6KL_USB_PIPE_RX_DATA2,
+	ATH6KL_USB_PIPE_RX_INT,
+	ATH6KL_USB_PIPE_MAX
+};
+
+#define ATH6KL_USB_PIPE_INVALID ATH6KL_USB_PIPE_MAX
+
+struct ath6kl_usb_pipe {
+	struct list_head urb_list_head;
+	struct usb_anchor urb_submitted;
+	u32 urb_alloc;
+	u32 urb_cnt;
+	u32 urb_cnt_thresh;
+	unsigned int usb_pipe_handle;
+	u32 flags;
+	u8 ep_address;
+	u8 logical_pipe_num;
+	struct ath6kl_usb *ar_usb;
+	u16 max_packet_size;
+	struct work_struct io_complete_work;
+	struct sk_buff_head io_comp_queue;
+	struct usb_endpoint_descriptor *ep_desc;
+};
+
+#define ATH6KL_USB_PIPE_FLAG_TX    (1 << 0)
+
 /* usb device object */
 struct ath6kl_usb {
+	/* protects pipe->urb_list_head and  pipe->urb_cnt */
+	spinlock_t cs_lock;
+
 	struct usb_device *udev;
 	struct usb_interface *interface;
+	struct ath6kl_usb_pipe pipes[ATH6KL_USB_PIPE_MAX];
 	u8 *diag_cmd_buffer;
 	u8 *diag_resp_buffer;
 	struct ath6kl *ar;
 };
 
+/* usb urb object */
+struct ath6kl_urb_context {
+	struct list_head link;
+	struct ath6kl_usb_pipe *pipe;
+	struct sk_buff *skb;
+	struct ath6kl *ar;
+};
+
+/* USB endpoint definitions */
+#define ATH6KL_USB_EP_ADDR_APP_CTRL_IN          0x81
+#define ATH6KL_USB_EP_ADDR_APP_DATA_IN          0x82
+#define ATH6KL_USB_EP_ADDR_APP_DATA2_IN         0x83
+#define ATH6KL_USB_EP_ADDR_APP_INT_IN           0x84
+
+#define ATH6KL_USB_EP_ADDR_APP_CTRL_OUT         0x01
+#define ATH6KL_USB_EP_ADDR_APP_DATA_LP_OUT      0x02
+#define ATH6KL_USB_EP_ADDR_APP_DATA_MP_OUT      0x03
+#define ATH6KL_USB_EP_ADDR_APP_DATA_HP_OUT      0x04
+
 /* diagnostic command defnitions */
 #define ATH6KL_USB_CONTROL_REQ_SEND_BMI_CMD        1
 #define ATH6KL_USB_CONTROL_REQ_RECV_BMI_RESP       2
@@ -55,11 +117,493 @@ struct ath6kl_usb_ctrl_diag_resp_read {
 	__le32 value;
 } __packed;
 
+/* function declarations */
+static void ath6kl_usb_recv_complete(struct urb *urb);
+
+#define ATH6KL_USB_IS_BULK_EP(attr) (((attr) & 3) == 0x02)
+#define ATH6KL_USB_IS_INT_EP(attr)  (((attr) & 3) == 0x03)
+#define ATH6KL_USB_IS_ISOC_EP(attr)  (((attr) & 3) == 0x01)
+#define ATH6KL_USB_IS_DIR_IN(addr)  ((addr) & 0x80)
+
+/* pipe/urb operations */
+static struct ath6kl_urb_context *
+ath6kl_usb_alloc_urb_from_pipe(struct ath6kl_usb_pipe *pipe)
+{
+	struct ath6kl_urb_context *urb_context = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags);
+	if (!list_empty(&pipe->urb_list_head)) {
+		urb_context =
+		    list_first_entry(&pipe->urb_list_head,
+				     struct ath6kl_urb_context, link);
+		list_del(&urb_context->link);
+		pipe->urb_cnt--;
+	}
+	spin_unlock_irqrestore(&pipe->ar_usb->cs_lock, flags);
+
+	return urb_context;
+}
+
+static void ath6kl_usb_free_urb_to_pipe(struct ath6kl_usb_pipe *pipe,
+					struct ath6kl_urb_context *urb_context)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags);
+	pipe->urb_cnt++;
+
+	list_add(&urb_context->link, &pipe->urb_list_head);
+	spin_unlock_irqrestore(&pipe->ar_usb->cs_lock, flags);
+}
+
+static void ath6kl_usb_cleanup_recv_urb(struct ath6kl_urb_context *urb_context)
+{
+	if (urb_context->skb != NULL) {
+		dev_kfree_skb(urb_context->skb);
+		urb_context->skb = NULL;
+	}
+
+	ath6kl_usb_free_urb_to_pipe(urb_context->pipe, urb_context);
+}
+
+static inline struct ath6kl_usb *ath6kl_usb_priv(struct ath6kl *ar)
+{
+	return ar->hif_priv;
+}
+
+/* pipe resource allocation/cleanup */
+static int ath6kl_usb_alloc_pipe_resources(struct ath6kl_usb_pipe *pipe,
+					   int urb_cnt)
+{
+	struct ath6kl_urb_context *urb_context;
+	int status = 0, i;
+
+	INIT_LIST_HEAD(&pipe->urb_list_head);
+	init_usb_anchor(&pipe->urb_submitted);
+
+	for (i = 0; i < urb_cnt; i++) {
+		urb_context = kzalloc(sizeof(struct ath6kl_urb_context),
+				      GFP_KERNEL);
+		if (urb_context == NULL)
+			/* FIXME: set status to -ENOMEM */
+			break;
+
+		urb_context->pipe = pipe;
+
+		/*
+		 * we are only allocate the urb contexts here, the actual URB
+		 * is allocated from the kernel as needed to do a transaction
+		 */
+		pipe->urb_alloc++;
+		ath6kl_usb_free_urb_to_pipe(pipe, urb_context);
+	}
+
+	ath6kl_dbg(ATH6KL_DBG_USB,
+		   "ath6kl usb: alloc resources lpipe:%d hpipe:0x%X urbs:%d\n",
+		   pipe->logical_pipe_num, pipe->usb_pipe_handle,
+		   pipe->urb_alloc);
+
+	return status;
+}
+
+static void ath6kl_usb_free_pipe_resources(struct ath6kl_usb_pipe *pipe)
+{
+	struct ath6kl_urb_context *urb_context;
+
+	if (pipe->ar_usb == NULL) {
+		/* nothing allocated for this pipe */
+		return;
+	}
+
+	ath6kl_dbg(ATH6KL_DBG_USB,
+		   "ath6kl usb: free resources lpipe:%d"
+		   "hpipe:0x%X urbs:%d avail:%d\n",
+		   pipe->logical_pipe_num, pipe->usb_pipe_handle,
+		   pipe->urb_alloc, pipe->urb_cnt);
+
+	if (pipe->urb_alloc != pipe->urb_cnt) {
+		ath6kl_dbg(ATH6KL_DBG_USB,
+			   "ath6kl usb: urb leak! lpipe:%d"
+			   "hpipe:0x%X urbs:%d avail:%d\n",
+			   pipe->logical_pipe_num, pipe->usb_pipe_handle,
+			   pipe->urb_alloc, pipe->urb_cnt);
+	}
+
+	while (true) {
+		urb_context = ath6kl_usb_alloc_urb_from_pipe(pipe);
+		if (urb_context == NULL)
+			break;
+		kfree(urb_context);
+	}
+
+}
+
+static void ath6kl_usb_cleanup_pipe_resources(struct ath6kl_usb *ar_usb)
+{
+	int i;
+
+	for (i = 0; i < ATH6KL_USB_PIPE_MAX; i++)
+		ath6kl_usb_free_pipe_resources(&ar_usb->pipes[i]);
+
+}
+
+static u8 ath6kl_usb_get_logical_pipe_num(struct ath6kl_usb *ar_usb,
+					  u8 ep_address, int *urb_count)
+{
+	u8 pipe_num = ATH6KL_USB_PIPE_INVALID;
+
+	switch (ep_address) {
+	case ATH6KL_USB_EP_ADDR_APP_CTRL_IN:
+		pipe_num = ATH6KL_USB_PIPE_RX_CTRL;
+		*urb_count = RX_URB_COUNT;
+		break;
+	case ATH6KL_USB_EP_ADDR_APP_DATA_IN:
+		pipe_num = ATH6KL_USB_PIPE_RX_DATA;
+		*urb_count = RX_URB_COUNT;
+		break;
+	case ATH6KL_USB_EP_ADDR_APP_INT_IN:
+		pipe_num = ATH6KL_USB_PIPE_RX_INT;
+		*urb_count = RX_URB_COUNT;
+		break;
+	case ATH6KL_USB_EP_ADDR_APP_DATA2_IN:
+		pipe_num = ATH6KL_USB_PIPE_RX_DATA2;
+		*urb_count = RX_URB_COUNT;
+		break;
+	case ATH6KL_USB_EP_ADDR_APP_CTRL_OUT:
+		pipe_num = ATH6KL_USB_PIPE_TX_CTRL;
+		*urb_count = TX_URB_COUNT;
+		break;
+	case ATH6KL_USB_EP_ADDR_APP_DATA_LP_OUT:
+		pipe_num = ATH6KL_USB_PIPE_TX_DATA_LP;
+		*urb_count = TX_URB_COUNT;
+		break;
+	case ATH6KL_USB_EP_ADDR_APP_DATA_MP_OUT:
+		pipe_num = ATH6KL_USB_PIPE_TX_DATA_MP;
+		*urb_count = TX_URB_COUNT;
+		break;
+	case ATH6KL_USB_EP_ADDR_APP_DATA_HP_OUT:
+		pipe_num = ATH6KL_USB_PIPE_TX_DATA_HP;
+		*urb_count = TX_URB_COUNT;
+		break;
+	default:
+		/* note: there may be endpoints not currently used */
+		break;
+	}
+
+	return pipe_num;
+}
+
+static int ath6kl_usb_setup_pipe_resources(struct ath6kl_usb *ar_usb)
+{
+	struct usb_interface *interface = ar_usb->interface;
+	struct usb_host_interface *iface_desc = interface->cur_altsetting;
+	struct usb_endpoint_descriptor *endpoint;
+	struct ath6kl_usb_pipe *pipe;
+	int i, urbcount, status = 0;
+	u8 pipe_num;
+
+	ath6kl_dbg(ATH6KL_DBG_USB, "setting up USB Pipes using interface\n");
+
+	/* walk decriptors and setup pipes */
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		endpoint = &iface_desc->endpoint[i].desc;
+
+		if (ATH6KL_USB_IS_BULK_EP(endpoint->bmAttributes)) {
+			ath6kl_dbg(ATH6KL_DBG_USB,
+				   "%s Bulk Ep:0x%2.2X maxpktsz:%d\n",
+				   ATH6KL_USB_IS_DIR_IN
+				   (endpoint->bEndpointAddress) ?
+				   "RX" : "TX", endpoint->bEndpointAddress,
+				   le16_to_cpu(endpoint->wMaxPacketSize));
+		} else if (ATH6KL_USB_IS_INT_EP(endpoint->bmAttributes)) {
+			ath6kl_dbg(ATH6KL_DBG_USB,
+				   "%s Int Ep:0x%2.2X maxpktsz:%d interval:%d\n",
+				   ATH6KL_USB_IS_DIR_IN
+				   (endpoint->bEndpointAddress) ?
+				   "RX" : "TX", endpoint->bEndpointAddress,
+				   le16_to_cpu(endpoint->wMaxPacketSize),
+				   endpoint->bInterval);
+		} else if (ATH6KL_USB_IS_ISOC_EP(endpoint->bmAttributes)) {
+			/* TODO for ISO */
+			ath6kl_dbg(ATH6KL_DBG_USB,
+				   "%s ISOC Ep:0x%2.2X maxpktsz:%d interval:%d\n",
+				   ATH6KL_USB_IS_DIR_IN
+				   (endpoint->bEndpointAddress) ?
+				   "RX" : "TX", endpoint->bEndpointAddress,
+				   le16_to_cpu(endpoint->wMaxPacketSize),
+				   endpoint->bInterval);
+		}
+		urbcount = 0;
+
+		pipe_num =
+		    ath6kl_usb_get_logical_pipe_num(ar_usb,
+						    endpoint->bEndpointAddress,
+						    &urbcount);
+		if (pipe_num == ATH6KL_USB_PIPE_INVALID)
+			continue;
+
+		pipe = &ar_usb->pipes[pipe_num];
+		if (pipe->ar_usb != NULL) {
+			/* hmmm..pipe was already setup */
+			continue;
+		}
+
+		pipe->ar_usb = ar_usb;
+		pipe->logical_pipe_num = pipe_num;
+		pipe->ep_address = endpoint->bEndpointAddress;
+		pipe->max_packet_size = le16_to_cpu(endpoint->wMaxPacketSize);
+
+		if (ATH6KL_USB_IS_BULK_EP(endpoint->bmAttributes)) {
+			if (ATH6KL_USB_IS_DIR_IN(pipe->ep_address)) {
+				pipe->usb_pipe_handle =
+				    usb_rcvbulkpipe(ar_usb->udev,
+						    pipe->ep_address);
+			} else {
+				pipe->usb_pipe_handle =
+				    usb_sndbulkpipe(ar_usb->udev,
+						    pipe->ep_address);
+			}
+		} else if (ATH6KL_USB_IS_INT_EP(endpoint->bmAttributes)) {
+			if (ATH6KL_USB_IS_DIR_IN(pipe->ep_address)) {
+				pipe->usb_pipe_handle =
+				    usb_rcvintpipe(ar_usb->udev,
+						   pipe->ep_address);
+			} else {
+				pipe->usb_pipe_handle =
+				    usb_sndintpipe(ar_usb->udev,
+						   pipe->ep_address);
+			}
+		} else if (ATH6KL_USB_IS_ISOC_EP(endpoint->bmAttributes)) {
+			/* TODO for ISO */
+			if (ATH6KL_USB_IS_DIR_IN(pipe->ep_address)) {
+				pipe->usb_pipe_handle =
+				    usb_rcvisocpipe(ar_usb->udev,
+						    pipe->ep_address);
+			} else {
+				pipe->usb_pipe_handle =
+				    usb_sndisocpipe(ar_usb->udev,
+						    pipe->ep_address);
+			}
+		}
+
+		pipe->ep_desc = endpoint;
+
+		if (!ATH6KL_USB_IS_DIR_IN(pipe->ep_address))
+			pipe->flags |= ATH6KL_USB_PIPE_FLAG_TX;
+
+		status = ath6kl_usb_alloc_pipe_resources(pipe, urbcount);
+		if (status != 0)
+			break;
+	}
+
+	return status;
+}
+
+/* pipe operations */
+static void ath6kl_usb_post_recv_transfers(struct ath6kl_usb_pipe *recv_pipe,
+					   int buffer_length)
+{
+	struct ath6kl_urb_context *urb_context;
+	struct urb *urb;
+	int usb_status;
+
+	while (true) {
+		urb_context = ath6kl_usb_alloc_urb_from_pipe(recv_pipe);
+		if (urb_context == NULL)
+			break;
+
+		urb_context->skb = dev_alloc_skb(buffer_length);
+		if (urb_context->skb == NULL)
+			goto err_cleanup_urb;
+
+		urb = usb_alloc_urb(0, GFP_ATOMIC);
+		if (urb == NULL)
+			goto err_cleanup_urb;
+
+		usb_fill_bulk_urb(urb,
+				  recv_pipe->ar_usb->udev,
+				  recv_pipe->usb_pipe_handle,
+				  urb_context->skb->data,
+				  buffer_length,
+				  ath6kl_usb_recv_complete, urb_context);
+
+		ath6kl_dbg(ATH6KL_DBG_USB_BULK,
+			   "ath6kl usb: bulk recv submit:%d, 0x%X (ep:0x%2.2X), %d bytes buf:0x%p\n",
+			   recv_pipe->logical_pipe_num,
+			   recv_pipe->usb_pipe_handle, recv_pipe->ep_address,
+			   buffer_length, urb_context->skb);
+
+		usb_anchor_urb(urb, &recv_pipe->urb_submitted);
+		usb_status = usb_submit_urb(urb, GFP_ATOMIC);
+
+		if (usb_status) {
+			ath6kl_dbg(ATH6KL_DBG_USB_BULK,
+				   "ath6kl usb : usb bulk recv failed %d\n",
+				   usb_status);
+			usb_unanchor_urb(urb);
+			usb_free_urb(urb);
+			goto err_cleanup_urb;
+		}
+		usb_free_urb(urb);
+	}
+	return;
+
+err_cleanup_urb:
+	ath6kl_usb_cleanup_recv_urb(urb_context);
+	return;
+}
+
+static void ath6kl_usb_flush_all(struct ath6kl_usb *ar_usb)
+{
+	int i;
+
+	for (i = 0; i < ATH6KL_USB_PIPE_MAX; i++) {
+		if (ar_usb->pipes[i].ar_usb != NULL)
+			usb_kill_anchored_urbs(&ar_usb->pipes[i].urb_submitted);
+	}
+
+	/*
+	 * Flushing any pending I/O may schedule work this call will block
+	 * until all scheduled work runs to completion.
+	 */
+	flush_scheduled_work();
+}
+
+static void ath6kl_usb_start_recv_pipes(struct ath6kl_usb *ar_usb)
+{
+	/*
+	 * note: control pipe is no longer used
+	 * ar_usb->pipes[ATH6KL_USB_PIPE_RX_CTRL].urb_cnt_thresh =
+	 *      ar_usb->pipes[ATH6KL_USB_PIPE_RX_CTRL].urb_alloc/2;
+	 * ath6kl_usb_post_recv_transfers(&ar_usb->
+	 *		pipes[ATH6KL_USB_PIPE_RX_CTRL],
+	 *		ATH6KL_USB_RX_BUFFER_SIZE);
+	 */
+
+	ar_usb->pipes[ATH6KL_USB_PIPE_RX_DATA].urb_cnt_thresh =
+	    ar_usb->pipes[ATH6KL_USB_PIPE_RX_DATA].urb_alloc / 2;
+	ath6kl_usb_post_recv_transfers(&ar_usb->pipes[ATH6KL_USB_PIPE_RX_DATA],
+				       ATH6KL_USB_RX_BUFFER_SIZE);
+}
+
+/* hif usb rx/tx completion functions */
+static void ath6kl_usb_recv_complete(struct urb *urb)
+{
+	struct ath6kl_urb_context *urb_context = urb->context;
+	struct ath6kl_usb_pipe *pipe = urb_context->pipe;
+	struct sk_buff *skb = NULL;
+	int status = 0;
+
+	ath6kl_dbg(ATH6KL_DBG_USB_BULK,
+		   "%s: recv pipe: %d, stat:%d, len:%d urb:0x%p\n", __func__,
+		   pipe->logical_pipe_num, urb->status, urb->actual_length,
+		   urb);
+
+	if (urb->status != 0) {
+		status = -EIO;
+		switch (urb->status) {
+		case -ECONNRESET:
+		case -ENOENT:
+		case -ESHUTDOWN:
+			/*
+			 * no need to spew these errors when device
+			 * removed or urb killed due to driver shutdown
+			 */
+			status = -ECANCELED;
+			break;
+		default:
+			ath6kl_dbg(ATH6KL_DBG_USB_BULK,
+				   "%s recv pipe: %d (ep:0x%2.2X), failed:%d\n",
+				   __func__, pipe->logical_pipe_num,
+				   pipe->ep_address, urb->status);
+			break;
+		}
+		goto cleanup_recv_urb;
+	}
+
+	if (urb->actual_length == 0)
+		goto cleanup_recv_urb;
+
+	skb = urb_context->skb;
+
+	/* we are going to pass it up */
+	urb_context->skb = NULL;
+	skb_put(skb, urb->actual_length);
+
+	/* note: queue implements a lock */
+	skb_queue_tail(&pipe->io_comp_queue, skb);
+	schedule_work(&pipe->io_complete_work);
+
+cleanup_recv_urb:
+	ath6kl_usb_cleanup_recv_urb(urb_context);
+
+	if (status == 0 &&
+	    pipe->urb_cnt >= pipe->urb_cnt_thresh) {
+		/* our free urbs are piling up, post more transfers */
+		ath6kl_usb_post_recv_transfers(pipe, ATH6KL_USB_RX_BUFFER_SIZE);
+	}
+}
+
+static void ath6kl_usb_usb_transmit_complete(struct urb *urb)
+{
+	struct ath6kl_urb_context *urb_context = urb->context;
+	struct ath6kl_usb_pipe *pipe = urb_context->pipe;
+	struct sk_buff *skb;
+
+	ath6kl_dbg(ATH6KL_DBG_USB_BULK,
+		   "%s: pipe: %d, stat:%d, len:%d\n",
+		   __func__, pipe->logical_pipe_num, urb->status,
+		   urb->actual_length);
+
+	if (urb->status != 0) {
+		ath6kl_dbg(ATH6KL_DBG_USB_BULK,
+			   "%s:  pipe: %d, failed:%d\n",
+			   __func__, pipe->logical_pipe_num, urb->status);
+	}
+
+	skb = urb_context->skb;
+	urb_context->skb = NULL;
+	ath6kl_usb_free_urb_to_pipe(urb_context->pipe, urb_context);
+
+	/* note: queue implements a lock */
+	skb_queue_tail(&pipe->io_comp_queue, skb);
+	schedule_work(&pipe->io_complete_work);
+}
+
+static void ath6kl_usb_io_comp_work(struct work_struct *work)
+{
+	struct ath6kl_usb_pipe *pipe = container_of(work,
+						    struct ath6kl_usb_pipe,
+						    io_complete_work);
+	struct ath6kl_usb *ar_usb;
+	struct sk_buff *skb;
+
+	ar_usb = pipe->ar_usb;
+
+	while ((skb = skb_dequeue(&pipe->io_comp_queue))) {
+		if (pipe->flags & ATH6KL_USB_PIPE_FLAG_TX) {
+			ath6kl_dbg(ATH6KL_DBG_USB_BULK,
+				   "ath6kl usb xmit callback buf:0x%p\n", skb);
+			ath6kl_core_tx_complete(ar_usb->ar, skb);
+		} else {
+			ath6kl_dbg(ATH6KL_DBG_USB_BULK,
+				   "ath6kl usb recv callback buf:0x%p\n", skb);
+			ath6kl_core_rx_complete(ar_usb->ar, skb,
+						pipe->logical_pipe_num);
+		}
+	}
+}
+
 #define ATH6KL_USB_MAX_DIAG_CMD (sizeof(struct ath6kl_usb_ctrl_diag_cmd_write))
 #define ATH6KL_USB_MAX_DIAG_RESP (sizeof(struct ath6kl_usb_ctrl_diag_resp_read))
 
 static void ath6kl_usb_destroy(struct ath6kl_usb *ar_usb)
 {
+	ath6kl_usb_flush_all(ar_usb);
+
+	ath6kl_usb_cleanup_pipe_resources(ar_usb);
+
 	usb_set_intfdata(ar_usb->interface, NULL);
 
 	kfree(ar_usb->diag_cmd_buffer);
@@ -70,19 +614,28 @@ static void ath6kl_usb_destroy(struct ath6kl_usb *ar_usb)
 
 static struct ath6kl_usb *ath6kl_usb_create(struct usb_interface *interface)
 {
-	struct ath6kl_usb *ar_usb = NULL;
 	struct usb_device *dev = interface_to_usbdev(interface);
+	struct ath6kl_usb *ar_usb;
+	struct ath6kl_usb_pipe *pipe;
 	int status = 0;
+	int i;
 
 	ar_usb = kzalloc(sizeof(struct ath6kl_usb), GFP_KERNEL);
 	if (ar_usb == NULL)
 		goto fail_ath6kl_usb_create;
 
-	memset(ar_usb, 0, sizeof(struct ath6kl_usb));
 	usb_set_intfdata(interface, ar_usb);
+	spin_lock_init(&(ar_usb->cs_lock));
 	ar_usb->udev = dev;
 	ar_usb->interface = interface;
 
+	for (i = 0; i < ATH6KL_USB_PIPE_MAX; i++) {
+		pipe = &ar_usb->pipes[i];
+		INIT_WORK(&pipe->io_complete_work,
+			  ath6kl_usb_io_comp_work);
+		skb_queue_head_init(&pipe->io_comp_queue);
+	}
+
 	ar_usb->diag_cmd_buffer = kzalloc(ATH6KL_USB_MAX_DIAG_CMD, GFP_KERNEL);
 	if (ar_usb->diag_cmd_buffer == NULL) {
 		status = -ENOMEM;
@@ -96,6 +649,8 @@ static struct ath6kl_usb *ath6kl_usb_create(struct usb_interface *interface)
 		goto fail_ath6kl_usb_create;
 	}
 
+	status = ath6kl_usb_setup_pipe_resources(ar_usb);
+
 fail_ath6kl_usb_create:
 	if (status != 0) {
 		ath6kl_usb_destroy(ar_usb);
@@ -114,11 +669,177 @@ static void ath6kl_usb_device_detached(struct usb_interface *interface)
 
 	ath6kl_stop_txrx(ar_usb->ar);
 
+	/* Delay to wait for the target to reboot */
+	mdelay(20);
 	ath6kl_core_cleanup(ar_usb->ar);
-
 	ath6kl_usb_destroy(ar_usb);
 }
 
+/* exported hif usb APIs for htc pipe */
+static void hif_start(struct ath6kl *ar)
+{
+	struct ath6kl_usb *device = ath6kl_usb_priv(ar);
+	int i;
+
+	ath6kl_usb_start_recv_pipes(device);
+
+	/* set the TX resource avail threshold for each TX pipe */
+	for (i = ATH6KL_USB_PIPE_TX_CTRL;
+	     i <= ATH6KL_USB_PIPE_TX_DATA_HP; i++) {
+		device->pipes[i].urb_cnt_thresh =
+		    device->pipes[i].urb_alloc / 2;
+	}
+}
+
+static int ath6kl_usb_send(struct ath6kl *ar, u8 PipeID,
+			   struct sk_buff *hdr_skb, struct sk_buff *skb)
+{
+	struct ath6kl_usb *device = ath6kl_usb_priv(ar);
+	struct ath6kl_usb_pipe *pipe = &device->pipes[PipeID];
+	struct ath6kl_urb_context *urb_context;
+	int usb_status, status = 0;
+	struct urb *urb;
+	u8 *data;
+	u32 len;
+
+	ath6kl_dbg(ATH6KL_DBG_USB_BULK, "+%s pipe : %d, buf:0x%p\n",
+		   __func__, PipeID, skb);
+
+	urb_context = ath6kl_usb_alloc_urb_from_pipe(pipe);
+
+	if (urb_context == NULL) {
+		/*
+		 * TODO: it is possible to run out of urbs if
+		 * 2 endpoints map to the same pipe ID
+		 */
+		ath6kl_dbg(ATH6KL_DBG_USB_BULK,
+			   "%s pipe:%d no urbs left. URB Cnt : %d\n",
+			   __func__, PipeID, pipe->urb_cnt);
+		status = -ENOMEM;
+		goto fail_hif_send;
+	}
+
+	urb_context->skb = skb;
+
+	data = skb->data;
+	len = skb->len;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (urb == NULL) {
+		status = -ENOMEM;
+		ath6kl_usb_free_urb_to_pipe(urb_context->pipe,
+					    urb_context);
+		goto fail_hif_send;
+	}
+
+	usb_fill_bulk_urb(urb,
+			  device->udev,
+			  pipe->usb_pipe_handle,
+			  data,
+			  len,
+			  ath6kl_usb_usb_transmit_complete, urb_context);
+
+	if ((len % pipe->max_packet_size) == 0) {
+		/* hit a max packet boundary on this pipe */
+		urb->transfer_flags |= URB_ZERO_PACKET;
+	}
+
+	ath6kl_dbg(ATH6KL_DBG_USB_BULK,
+		   "athusb bulk send submit:%d, 0x%X (ep:0x%2.2X), %d bytes\n",
+		   pipe->logical_pipe_num, pipe->usb_pipe_handle,
+		   pipe->ep_address, len);
+
+	usb_anchor_urb(urb, &pipe->urb_submitted);
+	usb_status = usb_submit_urb(urb, GFP_ATOMIC);
+
+	if (usb_status) {
+		ath6kl_dbg(ATH6KL_DBG_USB_BULK,
+			   "ath6kl usb : usb bulk transmit failed %d\n",
+			   usb_status);
+		usb_unanchor_urb(urb);
+		ath6kl_usb_free_urb_to_pipe(urb_context->pipe,
+					    urb_context);
+		status = -EINVAL;
+	}
+	usb_free_urb(urb);
+
+fail_hif_send:
+	return status;
+}
+
+static void hif_stop(struct ath6kl *ar)
+{
+	struct ath6kl_usb *device = ath6kl_usb_priv(ar);
+
+	ath6kl_usb_flush_all(device);
+}
+
+static void ath6kl_usb_get_default_pipe(struct ath6kl *ar,
+					u8 *ul_pipe, u8 *dl_pipe)
+{
+	*ul_pipe = ATH6KL_USB_PIPE_TX_CTRL;
+	*dl_pipe = ATH6KL_USB_PIPE_RX_CTRL;
+}
+
+static int ath6kl_usb_map_service_pipe(struct ath6kl *ar, u16 svc_id,
+				       u8 *ul_pipe, u8 *dl_pipe)
+{
+	int status = 0;
+
+	switch (svc_id) {
+	case HTC_CTRL_RSVD_SVC:
+	case WMI_CONTROL_SVC:
+		*ul_pipe = ATH6KL_USB_PIPE_TX_CTRL;
+		/* due to large control packets, shift to data pipe */
+		*dl_pipe = ATH6KL_USB_PIPE_RX_DATA;
+		break;
+	case WMI_DATA_BE_SVC:
+	case WMI_DATA_BK_SVC:
+		*ul_pipe = ATH6KL_USB_PIPE_TX_DATA_LP;
+		/*
+		* Disable rxdata2 directly, it will be enabled
+		* if FW enable rxdata2
+		*/
+		*dl_pipe = ATH6KL_USB_PIPE_RX_DATA;
+		break;
+	case WMI_DATA_VI_SVC:
+		*ul_pipe = ATH6KL_USB_PIPE_TX_DATA_MP;
+		/*
+		* Disable rxdata2 directly, it will be enabled
+		* if FW enable rxdata2
+		*/
+		*dl_pipe = ATH6KL_USB_PIPE_RX_DATA;
+		break;
+	case WMI_DATA_VO_SVC:
+		*ul_pipe = ATH6KL_USB_PIPE_TX_DATA_HP;
+		/*
+		* Disable rxdata2 directly, it will be enabled
+		* if FW enable rxdata2
+		*/
+		*dl_pipe = ATH6KL_USB_PIPE_RX_DATA;
+		break;
+	default:
+		status = -EPERM;
+		break;
+	}
+
+	return status;
+}
+
+static u16 ath6kl_usb_get_free_queue_number(struct ath6kl *ar, u8 pipe_id)
+{
+	struct ath6kl_usb *device = ath6kl_usb_priv(ar);
+
+	return device->pipes[pipe_id].urb_cnt;
+}
+
+static void hif_detach_htc(struct ath6kl *ar)
+{
+	struct ath6kl_usb *device = ath6kl_usb_priv(ar);
+
+	ath6kl_usb_flush_all(device);
+}
+
 static int ath6kl_usb_submit_ctrl_out(struct ath6kl_usb *ar_usb,
 				   u8 req, u16 value, u16 index, void *data,
 				   u32 size)
@@ -301,14 +1022,21 @@ static int ath6kl_usb_bmi_write(struct ath6kl *ar, u8 *buf, u32 len)
 
 static int ath6kl_usb_power_on(struct ath6kl *ar)
 {
+	hif_start(ar);
 	return 0;
 }
 
 static int ath6kl_usb_power_off(struct ath6kl *ar)
 {
+	hif_detach_htc(ar);
 	return 0;
 }
 
+static void ath6kl_usb_stop(struct ath6kl *ar)
+{
+	hif_stop(ar);
+}
+
 static const struct ath6kl_hif_ops ath6kl_usb_ops = {
 	.diag_read32 = ath6kl_usb_diag_read32,
 	.diag_write32 = ath6kl_usb_diag_write32,
@@ -316,6 +1044,11 @@ static const struct ath6kl_hif_ops ath6kl_usb_ops = {
 	.bmi_write = ath6kl_usb_bmi_write,
 	.power_on = ath6kl_usb_power_on,
 	.power_off = ath6kl_usb_power_off,
+	.stop = ath6kl_usb_stop,
+	.pipe_send = ath6kl_usb_send,
+	.pipe_get_default = ath6kl_usb_get_default_pipe,
+	.pipe_map_service = ath6kl_usb_map_service_pipe,
+	.pipe_get_free_queue_number = ath6kl_usb_get_free_queue_number,
 };
 
 /* ath6kl usb driver registered functions */
@@ -368,7 +1101,7 @@ static int ath6kl_usb_probe(struct usb_interface *interface,
 
 	ar_usb->ar = ar;
 
-	ret = ath6kl_core_init(ar);
+	ret = ath6kl_core_init(ar, ATH6KL_HTC_TYPE_PIPE);
 	if (ret) {
 		ath6kl_err("Failed to init ath6kl core: %d\n", ret);
 		goto err_core_free;
@@ -392,6 +1125,46 @@ static void ath6kl_usb_remove(struct usb_interface *interface)
 	ath6kl_usb_device_detached(interface);
 }
 
+#ifdef CONFIG_PM
+
+static int ath6kl_usb_suspend(struct usb_interface *interface,
+			      pm_message_t message)
+{
+	struct ath6kl_usb *device;
+	device = usb_get_intfdata(interface);
+
+	ath6kl_usb_flush_all(device);
+	return 0;
+}
+
+static int ath6kl_usb_resume(struct usb_interface *interface)
+{
+	struct ath6kl_usb *device;
+	device = usb_get_intfdata(interface);
+
+	ath6kl_usb_post_recv_transfers(&device->pipes[ATH6KL_USB_PIPE_RX_DATA],
+				       ATH6KL_USB_RX_BUFFER_SIZE);
+	ath6kl_usb_post_recv_transfers(&device->pipes[ATH6KL_USB_PIPE_RX_DATA2],
+				       ATH6KL_USB_RX_BUFFER_SIZE);
+
+	return 0;
+}
+
+static int ath6kl_usb_reset_resume(struct usb_interface *intf)
+{
+	if (usb_get_intfdata(intf))
+		ath6kl_usb_remove(intf);
+	return 0;
+}
+
+#else
+
+#define ath6kl_usb_suspend NULL
+#define ath6kl_usb_resume NULL
+#define ath6kl_usb_reset_resume NULL
+
+#endif
+
 /* table of devices that work with this driver */
 static struct usb_device_id ath6kl_usb_ids[] = {
 	{USB_DEVICE(0x0cf3, 0x9374)},
@@ -403,8 +1176,12 @@ MODULE_DEVICE_TABLE(usb, ath6kl_usb_ids);
 static struct usb_driver ath6kl_usb_driver = {
 	.name = "ath6kl_usb",
 	.probe = ath6kl_usb_probe,
+	.suspend = ath6kl_usb_suspend,
+	.resume = ath6kl_usb_resume,
+	.reset_resume = ath6kl_usb_reset_resume,
 	.disconnect = ath6kl_usb_remove,
 	.id_table = ath6kl_usb_ids,
+	.supports_autosuspend = true,
 };
 
 static int ath6kl_usb_init(void)