ath9k: Send WLAN channel info to BT

WLAN updates channel bitmap when associated and disassociated. Channel
bitmap will reflect whare are the channels used or affected by WLAN and
BT should avoid using those. Not doing so, could affect BT traffic
as both WLAN and BT is operating on same channel.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 50 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index ec2d7c80756..1733a5ac327 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -600,3 +600,53 @@ void ath_mci_enable(struct ath_softc *sc)
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_MCI)
 		sc->sc_ah->imask |= ATH9K_INT_MCI;
 }
+
+void ath9k_mci_update_wlan_channels(struct ath_softc *sc, bool allow_all)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+	struct ath9k_channel *chan = ah->curchan;
+	u32 channelmap[] = {0x00000000, 0xffff0000, 0xffffffff, 0x7fffffff};
+	int i;
+	s16 chan_start, chan_end;
+	u16 wlan_chan;
+
+	if (!chan || !IS_CHAN_2GHZ(chan))
+		return;
+
+	if (allow_all)
+		goto send_wlan_chan;
+
+	wlan_chan = chan->channel - 2402;
+
+	chan_start = wlan_chan - 10;
+	chan_end = wlan_chan + 10;
+
+	if (chan->chanmode == CHANNEL_G_HT40PLUS)
+		chan_end += 20;
+	else if (chan->chanmode == CHANNEL_G_HT40MINUS)
+		chan_start -= 20;
+
+	/* adjust side band */
+	chan_start -= 7;
+	chan_end += 7;
+
+	if (chan_start <= 0)
+		chan_start = 0;
+	if (chan_end >= ATH_MCI_NUM_BT_CHANNELS)
+		chan_end = ATH_MCI_NUM_BT_CHANNELS - 1;
+
+	ath_dbg(ath9k_hw_common(ah), MCI,
+		"WLAN current channel %d mask BT channel %d - %d\n",
+		wlan_chan, chan_start, chan_end);
+
+	for (i = chan_start; i < chan_end; i++)
+		MCI_GPM_CLR_CHANNEL_BIT(&channelmap, i);
+
+send_wlan_chan:
+	/* update and send wlan channels info to BT */
+	for (i = 0; i < 4; i++)
+		mci->wlan_channels[i] = channelmap[i];
+	ar9003_mci_send_wlan_channels(ah);
+	ar9003_mci_state(ah, MCI_STATE_SEND_VERSION_QUERY);
+}