Merge branch 'linus' into tracing/hw-breakpoints

Conflicts:
	arch/x86/kernel/process_64.c

Semantic conflict fixed in:
	arch/x86/kvm/x86.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 20 insertions, 14 deletions

diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 170c5b32e49..903dd8ad9d4 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -25,6 +25,8 @@ static struct pci_device_id ath_pci_id_table[] __devinitdata = {
 	{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI   */
 	{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
 	{ PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
+	{ PCI_VDEVICE(ATHEROS, 0x002D) }, /* PCI   */
+	{ PCI_VDEVICE(ATHEROS, 0x002E) }, /* PCI-E */
 	{ 0 }
 };
 
@@ -33,8 +35,7 @@ static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
 {
 	u8 u8tmp;
 
-	pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE,
-			     (u8 *)&u8tmp);
+	pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, &u8tmp);
 	*csz = (int)u8tmp;
 
 	/*
@@ -87,6 +88,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct ath_softc *sc;
 	struct ieee80211_hw *hw;
 	u8 csz;
+	u16 subsysid;
 	u32 val;
 	int ret = 0;
 	struct ath_hw *ah;
@@ -158,8 +160,9 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	hw = ieee80211_alloc_hw(sizeof(struct ath_wiphy) +
 				sizeof(struct ath_softc), &ath9k_ops);
-	if (hw == NULL) {
-		printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
+	if (!hw) {
+		dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
+		ret = -ENOMEM;
 		goto bad2;
 	}
 
@@ -176,17 +179,18 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	sc->mem = mem;
 	sc->bus_ops = &ath_pci_bus_ops;
 
-	if (ath_attach(id->device, sc) != 0) {
-		ret = -ENODEV;
+	pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
+	ret = ath_init_device(id->device, sc, subsysid);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize device\n");
 		goto bad3;
 	}
 
 	/* setup interrupt service routine */
 
-	if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
-		printk(KERN_ERR "%s: request_irq failed\n",
-			wiphy_name(hw->wiphy));
-		ret = -EIO;
+	ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc);
+	if (ret) {
+		dev_err(&pdev->dev, "request_irq failed\n");
 		goto bad4;
 	}
 
@@ -234,7 +238,7 @@ static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 
-	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
 
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
@@ -251,10 +255,12 @@ static int ath_pci_resume(struct pci_dev *pdev)
 	u32 val;
 	int err;
 
+	pci_restore_state(pdev);
+
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
-	pci_restore_state(pdev);
+
 	/*
 	 * Suspend/Resume resets the PCI configuration space, so we have to
 	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
@@ -265,9 +271,9 @@ static int ath_pci_resume(struct pci_dev *pdev)
 		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
 
 	/* Enable LED */
-	ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
+	ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
 			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-	ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
 
 	return 0;
 }